scholarly journals Analisis Tingkat Pelayanan Jalan Dan Evaluasi Struktur Perkerasan Jalan Pada Jalan Semeru, Jalan Pancasila Dan Jalan Kolonel Sudiarto

Author(s):  
Isradias Mirajhusnita ◽  
Ros Ayu Nisya’ul Fitri ◽  
Muhammad Yusuf ◽  
Muhamad Yunus

Tegal city station which is in the center of Tegal city. Activities in and out of station visitors lead to a density of road capacity. As well as the smoothness of traffic also depends on the condition of the road pavement. This study aims to determine the level of road service and evaluation of road pavement thickness as well as to provide alternative ways of handling road problems on Jalan Semeru, Jalan Pancasila and Jalan Kolonel Sudiarto which are influenced by road users around the Kota Tegal station. The benefits of the research provide material for consideration of regional structuring policies and input data on road improvement planning for related agencies. The research method is qualitative, namely analyzing the level of road service with LOS calculations according to the 1997 Indonesian Road Capacity Manual and evaluating pavement thickness with CESA calculations according to the 2013 Road Pavement Design Manual. Data analysis was obtained from field measurements and traffic volume calculations. The results of the calculation of the analysis of the level of road service on Jalan Semeru, Jalan Pancasila and Jalan Kolonel Sudiarto are at service level C, namely stable current conditions with an average speed of 30 km / h due to side obstacles so that the driver has limitations in choosing speed, it is recommended to add and traffic sign confirmation. Evaluation of the structure of the pavement layer on Jalan Pancasila is adequate for the next 20 years of planning life. Meanwhile, Jalan Semeru with a length of 610 meters and a width of 550 meters as well as Jalan Kolonel Sudiarto with a length of 845 meters and a width of 700 meters need to be thickened with a layer of wear layer (AC-WC) with a thickness of 4 cm at a cost of Rp. 1,256,137,000.

2020 ◽  
Vol 3 (4) ◽  
pp. 1077
Author(s):  
Leonardo Lijuwardi ◽  
Gregorius Sandjaja Sentosa

ABSTRACTMulti-layer systems theory is one of the concepts used in finding out the amount of strain and stress that occurs in the road pavement system due to vehicle loads. The purpose and goal of this study is to analyze the amount of strain that occurs on the pavement systems in Indonesia, especially in the subgrade position. The type of multi-layer system theory used to calculate the amount of strain includes the theory of one layer systems, two-layer systems and three-layer systems with data analyzed in the form of pavement thickness and type of pavement material.Based on this study, the value of strain obtained by the theory of one-layer system in some of the road data reviewed are 533.8658 microstrains, 361.3456 microstrains, 1577.987601 microstrains, 618,012 microstrains and 140.3075 microstrains. For research with two-layers systems, the results obtained are 1116.2920 microstrains, 544.322 microstrains, 1448.0839 microstrains, 734.1844 microstrains and 738.7226 microstrains. For research with three-layers system, results obtained are 72.20275278; 70.80346908; 192.9638366; 123.1150377dan 391.8845636 microstrains. The results with the calculation of one-layer system are very large because the modulus values of the subgrade layers are not reviewed and only pavement thickness is reviewed. As for calculations with the theory of two-layer systems, the results obtained are far greater than one-layer systems, due to the limitations of the graph to find the value of the ratio between thickness and large contact area. Calculation with the theory of three-layers system is a strain calculation which has a much smaller value compared to the theory of one-layer system and two- layer system. This is because this theory divides the calculated pavement layers into three layers, which is in accordance with the flexible pavement system which divides the pavement layers into three layers, so this calculation is the most ideal calculation because it approaches its original condition.ABSTRAKTeori sistem lapis banyak merupakan salah satu konsep yang digunakan dalam mencari tahu besaran regangan dan tegangan yang terjadi pada sistem perkerasan jalan raya akibat beban kendaraan. Maksud dan tujuan dari penelitian ini adalah untuk menganalisis mengenai besaran regangan yang terjadi pada jalan raya di Indonesia pada lapisan tanah dasar khususnya di posisi permukaan tanah dasar. Adapun jenis teori sistem lapis banyak yang digunakan untuk menghitung besaran regangan tersebut antara lain teori one-layer systems, two-layers systems dan three-layers systems dengan data yang dianalisis berupa tebal perkerasan dan jenis material perkerasan jalan.Berdasarkan penelitian ini, adapun nilai dari regangan yang diperoleh dengan teori one-layer system di beberapa data jalan yang ditinjau, antara lain 533.8658 mikrostrain, 361.3456 mikrostrain, 1577.987601 mikrostrain, 618.012 mikrostrain dan 140.3075 mikrostrain. Untuk penelitian dengan two-layers system diperoleh hasil yaitu 1116.2920 mikrostrain, 544.322 mikrostrain, 1448.0839 mikrostrain, 734.1844 mikrostrain dan 738.7226 mikrostrain. Untuk penelitian dengan three-layers system diperoleh hasil antara lain 72.20275278; 70.80346908; 192.9638366; 123.1150377 dan 391.8845636 mikrostrain. Hasil dengan perhitungan one-layer system sangat besar dikarenakan nilai modulus lapisan dari subgrade tidak ditinjau dan hanya meninjau tebal perkerasan. Adapun untuk perhitungan dengan teori two-layers system, hasil yang diperoleh jauh lebih besar daripada one-layer system, yang disebabkan keterbatasan dari grafik untuk mencari nilai perbandingan antara ketebalan dan luas kontak yang besar. Perhitungan dengan teori three-layers system merupakan perhitungan regangan yang memiliki nilai jauh lebih kecil dibandingkan dengan teori one-layer system dan two-layer systems. Hal ini dikarenakan teori ini membagi lapisan perkerasan yang dihitung menjadi tiga buah lapisan, yang sesuai dengan sistem perkerasan lentur yang membagi lapisan perkerasan menjadi tiga buah lapisan, sehingga perhitungan ini merupakan perhitungan yang paling ideal karena mendekati kondisi aslinya.


Author(s):  
Hernán Gonzalo Orden

In recent years the number of deaths and serious injuries is decreasing in Spain, but, although the reduction outside the cities has been very strong, inside the urban areas, it has been smaller. This is especially hard if you look at the most vulnerable road users such as pedestrians and cyclists. In many accidents the speed factor appears closely linked not only to the number, but also to the severity of the accidents suffered inside the urban areas. Therefore, a reduction in the speed would improve the road safety. There are different measures known as "traffic calming measures" whose objectives are to reduce both the number and severity of accidents that occur on urban areas, by reducing the traffic flow through the streets, as well as the speed of the vehicles. However, the efficiency in speed reduction of each measure is not entirely known. That's the reason why they are implanted, in many cases, with no technical basis. The aim of this article is to show the effectiveness in reducing speed of some of the traffic calming measures. To this effect, field measurements were done on street sections with different types of traffic calming measures, in different places of a city of Burgos, in the north of Spain. These measurements were compared with other ones sited on other streets sections of similar characteristics but without traffic calming measures. Finally the conclusions are shown and some recommendations for improving their effectiveness are given.DOI: http://dx.doi.org/10.4995/CIT2016.2016.4217


2019 ◽  
Vol 2 (1) ◽  
pp. 75
Author(s):  
Philipus Resato Nahak ◽  
Yosef Cahyo ◽  
Sigit Winarto

The increase in traffic volume will cause a decrease in service due to decreased road capacity due to an increase in side constraints and due to the increase in traffic volume itself, which will ultimately cause the level of road saturation to increase. The situation occurred in the Umasukaer road section of the Malacca Regency. Therefore it is necessary to address improvements in the quality of the road in order to meet the feasibility of transportation facilities by taking into account the existing technical requirements. The results of planning found that through the 2015 LHR survey data with a prediction of an increase in traffic density of 6% per year, the LHR was obtained with a planned age of 7 years = 2540.7 vehicles/day/department and a 20-year plan life LHR = 5419.1 ked/day / major. The results of a gradual construction planning pavement study can be concluded that the planning model that has been designed is effective in strengthening road construction in accordance with existing technical requirements and efficient in terms of financing. The final results of gradual construction pavement thickness results are: Ashburton thickness (MS 744) = 8 cm, Ashburton (MS 744) = 13 cm, broken stone (CBR 100) = 20 cm, Sirtu (CBR 50) = 10 cm and CBR subgrade 5%. Pertambahan volume lalu lintas akan menyebabkan penurunan layanan diakibatkan menurunnya kapasitas jalan karena adanya peningkatan hambatan samping maupun karena beratambahnya volume lalu lintas itu sendiri yang pada akhirnya akan meyebabkan tingkat kejenuhan jalan meningkat. Keadaan tersebut terjadi ruas jalan Umasukaer Kabupaten Malaka, oleh karena itu perlu adanya penanganan perbaikan kualitas jalan agar memenuhi segi kelayakan sarana transportasi dengan memperhatikan syarat-syarat teknik yang ada. Hasil perencanaan didapatkan bahwa melalui data survey LHR tahun 2015 dengan prediksi peningkatan kepadatan lalu lintas sebesar 6% pertahun maka didapatkan LHR dengan umur rencana 7 tahun = 2540,7 kend/hr/jurusan dan LHR umur rencana 20 tahun = 5419,1 ked/hr/jurusan. Hasil studi perencanaan perkerasan konstruksi bertahap dapat diambil kesimpulan bahwa model perencaaan yang telah dirancang efektif dalam memperkerasa konstruksi jalan sesuai dengan syarat teknis yang ada serta efisien dalam hal pembiayaan. Hasil akhir tebal perkerasan konstruksi bertahap diperoleh hasil: Ketebalan Asbuton (MS 744) = 8 cm, Asbuton (MS 744) = 13 cm, batu pecah (CBR 100) = 20 cm, Sirtu (CBR 50) = 10 cm dan CBR tanah dasar 5%.


Author(s):  
Muhammad Ayung Tama ◽  
M. Ikhsan Setiawan ◽  
Sapto Budi Wasono

Along with the increasing number of the population of Sidoarjo, this has an i mpact on traffic volume, it occurs on the road of Gedangan roads to Buduran, therefore carried out the transfer of road access to the East Ring Road with specialized for heavy vehicles, due to the transfer of the road, it is necessary to perform the analysis of the East circumference road performance. The research aims to determine the magnitude of the influence of heavy vehicle volumes on the road performance of the East Ring road. The performance Of the east circumference traffic by counting the Level Of Service (LOS) and calculating the volume Of the vehicle compared to the road capacity (degree Of saturation). Traffic volume Data surveyed for 2 days (6 and 10 August 2020), for 6 hours per day at 06.00 – 08.00, 12.00 – 14.00, and 16.00 – 18.00. The analysis of road performance is using the Manual road Capacity (MKJI) method with a degree of saturation (DS) as the main indicator of road performance. The results of the analysis showed the performance of the road on the condition of the excitation point 1 the value of saturation of 0.61 and in point 2 of the value of saturation 0.97 and the result of service level of roadway 1 is C (steady current speed and motion-controlled vehicles) and in point 2 is E (current unstable speed sometimes stalled close request of capacity).


2018 ◽  
Vol 1 (2) ◽  
Author(s):  
Chairul Anwar ◽  
M Taufik Yudha Saputra

This research was carried out on Jalan Oesman Shah on Labuha-Tomori Road. In determiningflexible pavement thickness, based on the results of analysis and calculation of PavementThickness Design Against Traffic Volume on Swamp Conditions on the Labuha-Tomori RoadSection using the Road Pavement Design Manual Number 02 / M / BM / 2013. Based on theexisting plan, this Labuha-Tomori road section in South Halmahera Regency, North MalukuProvince is an arterial road with 2-lane 2-way road type using the median (2/2 UD), plan width of10 meters, width of existing traffic lane 4, 5 meters, median width of 1 meter, and plannedshoulder width 2.40 m. Based on the results of the analysis of growth rates obtained traffic growthrates of 33.066% over the life of the plan, determining the distribution factor of the lane and thecapacity of the lane of lane 1 and the vehicle in the design lane taken 100%. The equivalent loadfactor can be determined using the value of VDF (Vehicle Damage Factor) according to thesurvey results in the field. The traffic volume plan to determine the CESA4 value = 18,835,021.85= 18.84 million is used for the selection of pavement types while the CESA5 value =33,903,039.33 = 33.90 million is used to determine the type of flexible pavement based on thedesign chart provided in The Road Pavement Design Manual Number 02 / M / BM / 2013, ishighly emphasized in terms of the improvement of subgrade, by looking at the condition of theCBR of the subgrade and CESA5 which will be received by pavement. So if the pavement CBR is5.20% and CESA5 is 33.90 Million, the flexible pavement design is of 2 kinds in the design ofpavement thickness: AC - WC = 4 cm, AC - BC = 15.5 cm, CTB = 15 cm, LPA Class A = 15 cm,Choice of 10 cm and AC - WC = 4 cm, AC - BC = 6 cm, AC BASE = 18 cm, LPA = 30 cm, Choiceof Stock = 10 cm, and Subgrade = 5.20%


2021 ◽  
Vol 1 ◽  
pp. 180-184
Author(s):  
Dwi Prastya Nurcahaya ◽  
R Endro Wibisono

Klampis Jaya Road, Surabaya City, has a fairly heavy traffic flow, especially during working hours. This resulted in congestion on Klampis Jaya Road and not a few motorists who violated traffic regulations such as turning around Mleto Road. This study aimed to determine the current traffic flow performance and in 2024 at the intersection on Klampis Jaya Road, Surabaya City, predicted the traffic flow performance around the road and intersection on Klampis Jaya Road Surabaya City. The research method used was non-signalized intersection analysis using the Indonesian Road Capacity Manual. The calculation of the traffic performance of the four intersections in Klampis Jaya showed the Degree of Saturation (DS) and Service Level (TP) of each intersection. Traffic performance for the four intersections in 2021 was DS = 0.752 and TP = C (Enough), with the characteristics of stable traffic flow, was restricted movement. The traffic performance for the four intersections in 2024 was DS = 0.95 and TP = D (Less), with the characteristics of traffic flow stable movement being limited.


Media Ekonomi ◽  
2020 ◽  
pp. 16
Author(s):  
Ibram Pinondang Dalimunthe ◽  
Nofryanti Nofryanti

This study provides an overview and analysis of the perceptions of road users on online motorcycle taxi behavior from the point of view of congestion. The research method uses a descriptive quantitative approach that explains the research objectives. The population of this study is all road users in the Jakarta, Bogor, Depok, Tangerang and Bekasi areas. The samples used for research are people who have used online motorcycle taxi service facilities, as well as the general public who have views regarding online transportation. Data collection techniques using a questionnaire and distributed to respondents. The results showed that people's perceptions of online motorcycle taxis were able to create safety and comfort for customers, facilitate delivery of goods, be able to take the initiative to find alternative ways to shorten mileage, and affordable online ojek costs for customers. However, on the other hand, respondents said that the existence of online motorcycle taxis can contribute to the level of congestion on the road, respondents agreed that a special shelter should be made for customers and online motorcycle taxi drivers while waiting for orders so as not to interfere with the activities of other road users that have an impact on congestion.


2021 ◽  
Vol 3 (2) ◽  
pp. 260-266
Author(s):  
Monalisa Bumbungan

This study aims to obtain the thickness of the flexible pavement (Flexible Pavement) from the Bina Marga 2013 method. The Bina Marga 2013 method is a method designed by the Directorate General of Highways, Ministry of Public Works. The change in the Bina Marga method to the Bina Marga 2013 method is intended to make the road pavement plan last longer. The Maros-Ujung Lamuru road section previously had a pavement layer where the old planning used the Component Analysis method and the author planned using the 2013 Bina Marga method.From the results of calculating the pavement thickness planning for the Maros - Ujung Lamuru section, segment 9 needs an increase in LPB 150 mm or 15 cm thick because the CBR value of the ground is low. Pavement thickness using the Bina Marga 2013 method is more economical and has a longer plan life than the Component Analysis method.


Author(s):  
Muhammad Isradi ◽  
Zaenal Arifin ◽  
Asep Sudrajat

Bogasari Road, which is located in Citeureup sub-district, Bogor Regency, within the PT Indocement Tunggal Prakarsa industrial area, is a road that uses rigid pavement. The road is always passed by heavily loaded vehicles that affect road pavement conditions and the level of comfort and safety for road users. The study's purpose is to determine the average daily traffic volume, determine the value of conditions in the rigid pavement, and provide input to relevant agencies in terms of solutions and road repair costs. The method used in the analysis is the Pavement Condition Index (PCI). The study shows the average daily traffic of 2,883 vehicles/hour/day and the average pavement condition value of 66.57 with a good rating, or in good condition. It also provides a method of repair by functional means.


CONSTRUCTION ◽  
2021 ◽  
Vol 1 (1) ◽  
pp. 1-11
Author(s):  
Ng Cui Ming ◽  
Ramadhansyah Putra Jaya ◽  
Haryati Awang

Hot Mix Asphalt (HMA) is the most commonly used in Malaysia for highways, interstates and roads due to its flexibility, economical, strong and provide safe riding quality for road users. Over the years, the increase of damage on pavement roads in Malaysia has become a severe issue although the road did not achieve its design life. Hence, to reduce damage and defect, an improvised road pavement structures is needed. Various studies have been conducted to identify the new materials that can be used as a replacement in hot mix asphalt. In this research, the purpose is to evaluate the performance of eggshell as coarse aggregate replacement in hot mix asphalt. The gradation for aggregate used in this mixture is AC14. The weight for total mixing of the aggregates used is 1200g while the grade for bitumen is 60/70. The samples were mixed with eggshell in the various percentages of 0%, 5%, 10%, 15% and 20% by total weight of aggregate size 5mm. The laboratory tests carried out to determine the properties of aggregates included, aggregate impact value and aggregate crushing value. Besides, penetration and softening point were also performed to determine the properties of bitumen. Several types of test were conducted towards the samples, which are Marshall Test, Indirect Tensile Strength and Cantabro Test. The results exhibit that the conventional asphalt mixture is more effective than modified asphalt mixture. The replacement of eggshell as coarse aggregate was not enough improvement to the performance of asphalt pavement as the performance of conventional mixture is more stable than modified mixture.


Sign in / Sign up

Export Citation Format

Share Document