scholarly journals Dispute of the Contracts: A Case from Sikta Irrigation Project, Banke, Nepal

2021 ◽  
pp. 169-185
Author(s):  
Anjay Kumar Mishra ◽  
Prakash Yadav ◽  
P. S. Aithal
Keyword(s):  
Policy Research ◽  
Secondary Data ◽  
Command Area ◽  
National Pride ◽  
Irrigation Project ◽  
Resource Leveling ◽  
Actual Duration ◽  
Timely Completion ◽  
Time Extension ◽  
The Mean

Purpose: Government of Nepal (GoN) is implementing many small, medium and large type of Irrigation Projects. Sikta Irrigation Project (SIP) is the National Pride Project implemented by the GoN. The command area of the project has 42766.00 ha and the beneficiary of the project have 46715 households consisting of 4,49,588 population of Banke district. The overall objective of the study is to assess the consequences of delay and dispute of the selected contracts of Sikta Irrigation Project, Banke, Nepal. Design/Methodology/Approach: Using secondary data of the contract the mean planned duration is compared with mean actual duration to analyze delay analysis and Disputes of the contract have been interpreted based on standards of contract using content analysis. Findings/Result: The mean planned duration of the contracts under the study is 17.42 months and mean actual time 32.28 months with a standard deviation of 7.72 months and meantime variance is 13.46 months behind the schedule and meantime overrun is 14.85 months. Dispute resolution of only Papu costal JV has been analyzed. The contracts need to be rectified in terms of time by proper scheduling and resource leveling based local calendar. Hope the new amendments (PPMO 10th) of time extension will be helpful for the timely completion of contracts. Originality/Value: Action research to enhance the performance of Projects by avoiding Disputes. Paper Type: Analytical Policy Research.

scholarly journals Time and Cost Performance Status of Sikta Irrigation Contract

2021 ◽  
pp. 286-305
Author(s):  
Anjay Kumar Mishra ◽  
Prakash Yadav ◽  
P. S. Aithal
Keyword(s):  
Performance Status ◽  
Policy Research ◽  
Secondary Data ◽  
Command Area ◽  
Cost Performance ◽  
Irrigation Project ◽  
Contract Performance ◽  
Schedule Time ◽  
The Government ◽  
Scheduled Time

Purpose: The government of Nepal (GoN) is implementing many small, medium, and large types of Irrigation Projects. Sikta Irrigation Project (SIP) is the National Pride Project implemented by the GoN. The command area of the project has 42766.00 ha and beneficiaries of the project have 46715 households consisting of 449588 population of Banke district. The paper aims to assess the contract performance in terms of the Time and Cost of the Sikta Irrigation Project, Banke, Nepal. Design/Methodology/Approach: Using secondary data of contract, content Analysis of Project documents review and Key Informant Interviews were used for assessing the contract performance. Findings/Result: Sikta Irrigation Project has a total of 52 contracts out of which consider for study based on documentation, only 18 contracts completed based on schedule time whereas 16 contracts behind schedule. However, 16 contracts are still on going far behind the schedule and one contract terminated. The actual expenditure of the project has 16.26 billion (64.90% of estimated cost) and the allocated budget was 18.26 billion (72.99% of estimated cost) whereas the estimated cost has 25.032 billion. It indicates that the progress of the project was 64.90% and fails to complete the scheduled time 2076/077. The client should prepare the project well before implementation with proper planning, designing, and detailed study from the beginning. Originality/Value: It is empirical research to assure the project performance based on lessons from Sikta Irrigation Project. Paper Type: Analytical Policy Research

THE USE OF COMMUNITY LANGUAGE LEARNINGMETHOD TO IMPROVE STUDENTS’ SPEAKING ACHIEVEMENT

2015 ◽  
Vol 4 (1) ◽  
Author(s):  
Eko Widoyo Putro ◽  
Berlin Sibarani
Keyword(s):  
Language Learning ◽  
Secondary Data ◽  
Primary Data ◽  
Second Grade ◽  
Learning Method ◽  
Field Notes ◽  
The Subject ◽  
The Mean ◽  
Method Improvement ◽  
Community Language

This study is aimed at improving the second grade of students’ speakingachievement by using Community Language Learning (CLL) Method. Theresearch was conducted by applying classroom action research. The subject of this study was second grade of Private Senior High School (Sekolah Menengah Atas Swasta) of Dwi Tunggal Tanjung Morawa which consisted of 31 students. To collect the data, the instruments used were primary data (SpeakingTest) and secondary data (interview sheet, observation sheet, field notes). It can be seen from the score in test I, test II and test III. In the Test I, the mean of the students’score was (64.77), in the Test II was (71.35), and the mean of the students’ score of the Test III was (80.90). Based on the interview, and observation sheet, it shows that the expression and excitement of the students got improved as well. It was found that teaching of speaking by using Community Language Learningcould significantly improve students’ speaking achievement.Key Words: Community Language Learning, Method, Improvement, Speaking Achievement

DAMPAK PENERAPAN BEA MASUK ANTI-DUMPING ATAS IMPOR PRODUK TINPLATE

2020 ◽  
Vol 4 (1) ◽  
Author(s):  
Marsanto Adi Nurcahyo ◽  
Aditya Subur Purwana
Keyword(s):  
Free Trade ◽  
Descriptive Analysis ◽  
Secondary Data ◽  
P Value ◽  
Import Duty ◽  
Domestic Production ◽  
The Mean ◽  
Mean Equality ◽  
Equality Test

ABSTRACT:Anti-dumping on tinplate products aim to protect domestic industries. Still, some industries want tinplate products not to be subject to anti-dumping because domestic production is not sufficient. This research examines the application of anti-dumping import duties on tinplate products from China, Taiwan, and Korea from 2014 to 2018, to know whether there are differences in the value of imports before and during the anti-dumping import duty. Use secondary data sourced from UN-Comtrade. Samples are selected by countries that have continuously sent tinplate products to Indonesia from 2010 to 2018, namely China, Taiwan, Korea, Japan, Germany, India, and Malaysia. Using the Mean Equality Test, it is known that there are differences in the import value before and during the anti-dumping import duty, with a p-value of 0.0114 less than α (0.05), so it is concluded that there is a difference in the import value of the tinplate product before and during anti-dumping duty. Descriptive analysis results illustrate imports from China and Taiwan tend to decrease. In contrast, imports from Korea tend to increase despite being subjected to anti-dumping duties because they can compete by using preferential tariffs based on free trade schemes.Keywords: Antidumping, Import duty, TinplateABSTRAK:Anti-dumping terhadap produk tinplate bertujuan melindungi industri dalam negeri, akan tetapi terdapat ìndustri yang menginginkan produk tinplate tidak dikenakan anti-dumping karena produksi dalam negeri belum mencukupi. Penelitian ini menguji penerapan bea masuk anti-dumping terhadap produk tinplate dari China, Taiwan dan Korea selama tahun 2014 s.d. 2018, dengan tujuan mengetahui apakah ada perbedaan nilai importasi sebelum dan selama dikenakan bea masuk anti-dumping. Menggunakan data sekunder yang bersumber dari UNComtrade. Sampel dipilih negara yang secara kontinyu mengirim produk tinplate ke Indonesia sejak 2010 s.d. 2018, yaitu China, Taiwan, Korea, Jepang, Jerman, India dan Malaysia. Menggunakan Mean Equality Test, diketahui terdapat perbedaan nilai importasi sebelum dengan selama dikenakan bea masuk anti-dumping. Hasil penelitian menunjukkan bahwa nilai-P (p-value) adalah 0,0114 lebih kecil dari alpha (α=0,05), sehingga disimpulkan terdapat perbedaan pada nilai importasi produk tinplate sebelum dengan selama dikenakan bea masuk anti-dumping. Hasil analisis deskriptif menggambarkan importasi dari China dan Taiwan cenderung menurun sedangkan importasi dari Korea cenderung naik walaupun dikenakan bea masuk anti-dumping karena mampu bersaing dengan menggunakan tarif preferensi berdasarkan skema perdagangan bebas.Kata Kunci: Anti-dumping, Bea Masuk, tinplate

Seasonal Influence on Milk Production Performance in SDCMPUL in Tamil Nadu

2021 ◽  
Keyword(s):  
Milk Production ◽  
Tamil Nadu ◽  
Seasonal Fluctuation ◽  
Secondary Data ◽  
Climatic Conditions ◽  
Production Performance ◽  
Reproduction Traits ◽  
Dairy Animals ◽  
The Mean ◽  
Spss Software

Dairy farming is vulnerable to seasonal variable factors such as temperature, cold climatic conditions, and rainfall. These affect the production and reproduction traits of dairy animals. Seasonal variability also affects the quantity of consumption and marketing of milk considerably. The study aimed to assess the seasonal fluctuation in milk production in Sivagangai District Cooperative Milk Producer Union Limited (SDCMPUL), Tamil Nadu. The study used secondary data. The milk production data were collected from SDCMPUL, Karaikudi, Tamil Nadu. The data covered the period from 2001-02 to 2020-21. The study used descriptive statistics, CAGR, and paired ‘t-test to determine the variation of milk production according to seasonal changes. The MS office - Excel software and SPSS software were used to analyse the data. The results revealed that the mean milk production of the lean and flush season was 2.46 and 2.30 lakh liters, and the CAGR of milk production in SDCMPUL, Tamil Nadu, during the period 2001-02 to 2020-21 was 5.65 percent, and it was 5.23 percent in lean season and 6.11 percent in the flush season while the growth rate of milk production during the lean and flush season was positive and was significant statistically. It was found that the quantity of milk production was higher in the lean season than a flush season; however, the variability of milk production was more in the flush season than in the lean season.

scholarly journals Crop Pattern Change and Crop Water Requirement Judgment using Remote Sensing and GIS Techniques: a research on Tungabhadra Dam Right Canal

2019 ◽  
Vol 8 (2S3) ◽  
pp. 652-657
Keyword(s):  
Remote Sensing ◽  
Water Requirement ◽  
Crop Water Requirement ◽  
Delta Method ◽  
Geographical Information ◽  
Command Area ◽  
Cropping Pattern ◽  
Crop Water ◽  
Irrigation Project ◽  
Gis Techniques

Agriculture is most important resources of any country worldwide which is a major renewable source and is dynamic. The study area selected was command area under Basavanna canal which is one of the canals to Tungabhadra river on right side bank. This selected canal for cropping pattern analysis has a command of 1240.00 hectare and is located at Vallabhpur, Bellary district. Basavanna canal has a designed discharge capacity of 125 cusecs for serving the cropping area. Every irrigation project has planned cropping pattern, the crop water requirement (CWR) for which is calculated based on Duty / Delta method. However due to growing population and increase demand for food products crop violation is found in every command leading to more irrigation. Remote Sensing (RS) and Geographical Information System (GIS) techniques have emerged as powerful tools for crop water management. Remotely sensed land use-land cover data was used for analysing the cropping pattern in the area and also to estimate the change in the cropping pattern. This study was performed using ArcGIS 9.3 and ERDAS 9 software. Crop water requirement was calculated using Modified Penman Equation for present cropping pattern. The study finds that, approximately 50% of water could be saved using modified Penmen method compared to crop water requirement calculated using Duty Delta method as adopted in project report and the same water may be diverted to meet other needs

scholarly journals Design of Water Distribution System: Appropriateness of Structured System in Large Irrigation Projects in Nepal

2016 ◽  
Vol 19 ◽  
pp. 25-30
Author(s):  
Basistha Adhakari
Keyword(s):  
Distribution System ◽  
Distribution Systems ◽  
Water Distribution ◽  
Irrigation System ◽  
Command Area ◽  
Irrigation Project ◽  
Irrigation Projects ◽  
Structured System ◽  
Large Irrigation ◽  
Area Development

Many large irrigation projects in Nepal operate under command area development works that emphasize on-farm water distribution and management. These projects have specific design characteristics that were planned to comply with available water resources, climatic conditions, soil type, and water distribution technology. The water distribution technologies differ based on the design needs of each individual project and the design preferences of various foreign consulting firms. This article focuses on the issues of planning and designing water distribution systems of large irrigation systems at the irrigation service delivery level. The layout planning of an irrigation system is an important aspect of design for water distribution, typically guided by hierarchical system. This article also highlights the existing canal hierarchy of these systems and their appropriateness for efficient water distribution. Furthermore, the appropriateness of the structured system is also examined in the Sunsari Morang Irrigation Project. The article concluded with some suggestions for planning and designing command area development works of forthcoming large irrigation projects such as the Sikta Irrigation Project, the Babai Irrigation Project, and the Mahakali Irrigation Project Stage-III.HYDRO Nepal JournalJournal of Water, Energy and EnvironmentIssue: 19Page: 25-30

scholarly journals A Statistical Study of Crime in Ghana

2020 ◽  
pp. 6-16
Author(s):  
Bosson-Amedenu Senyefia ◽  
Eyiah-Bediako Francis ◽  
Kusi Prince
Keyword(s):  
Logistic Regression ◽  
Educational Level ◽  
Multinomial Logistic Regression ◽  
Religious Affiliation ◽  
Secondary Data ◽  
Age Group ◽  
Multinomial Logistic Regression Analysis ◽  
Equality Of Means ◽  
Homogeneity Of Variance ◽  
The Mean

Understanding the dynamics, patterns, and probabilities associated with the correlates of crime is a promising way to managing crime. In this study, a multinomial logistic regression was used to predict the propensity of individuals for committing particular crimes. The secondary data of 6702 prisoners was collated from Ghana Prisons Service for the purpose of the study. ANOVA and Brown-Forsythe robust tests of equality of means were employed, where the assumptions for homogeneity of variance were sustained and violated respectively. Pearson’s correlation matrix was also used in the analysis. Our findings showed that religious affiliation and educational level of convicts significantly affected the odds that they would commit a particular crime. Multinomial logistic regression analysis indicated that illiteracy significantly affected the odds that one would commit the crimes of manslaughter, rape, theft, causing harm, and issuing death threats. On the other hand, religious affiliation of an offender significantly affected the odds to commit the crime of murder. Educational level (r= -0.25; p< 0.05) and religious affiliation (r= -0.26; p<0.05) correlated negatively with crime. There were no significant differences in the mean score of crime across educational and religious levels. However, there were significant differences in the mean score of crime across age and gender. The mean difference from the post-hoc analysis showed a pattern of an initial rise in crime among the younger age group (8-25 years), a subsequent decline in the age group of 26-35, and a final surge in individuals beyond 35 years that did not surpass the initial peak. Females (M: 6.89, SD: 1.253) were found to have lower crime incidence than males (M: 7.43, SD: 3.008) for all crimes considered in this study. We recommend that Ghana’s Prison Service consider incorporating further demographic information of inmates in order to support research; which could help identify avenues for the amelioration of crime locally.

scholarly journals Adoption of Competitor Focused Accounting Methods in Selected Manufacturing Companies in Nigeria

2014 ◽  
Vol 2 (3) ◽  
pp. 128-140
Author(s):  
Chiekezie Njideka Rita ◽  
Egbunike Patrick Amaechi ◽  
Odum Austin Nwekemezie
Keyword(s):  
Financial Performance ◽  
Manufacturing Industry ◽  
Stock Exchange ◽  
Secondary Data ◽  
Manufacturing Firms ◽  
Manufacturing Companies ◽  
Competitive Edge ◽  
Survey Techniques ◽  
Strategic Management Accounting ◽  
The Mean

This study-examined the extent of adoption of competitor focused accounting (CFA) in selected manufacturing firms listed on Nigerian Stock Exchange with a view to establishing whether there are differences in financial performance of the firms. The study is descriptive in nature and uses survey techniques. Accordingly, two-hundred and twenty four (224) key respondents in the Nigerian manufacturing industry were surveyed. This is complimented with secondary data collected from annual accounts and reports of fifty six (56) manufacturing companies listed in the Nigerian stock exchange. In addition to descriptive statistics, analysis of variance (F- Ratio) and scheffes’ (fs) test were used in analyzing collected data. The result of the study revealed that 14 companies representing (25%) were non-adopters of competitor focused accounting methods, 36 (64.3%) were partial adopters while 6 (10.7%) were full adopters. In addition, the mean financial performance of full adopters of CFA methods was 25.1 greater than that of partial adopters and also 45.71 greater than non-adopters. This shows a large difference. On the other hand, partial adopters’ mean financial performance was 20.61 greater than that of non adopters of CFA methods. However, this study proves that the practice of CFA in Nigerian manufacturing companies is still below average and the necessity to improve this situation is the current challenge. Manufacturing firms in Nigeria should give priority to strategic management accounting and it sub-divisions especially CFA in other to enhance its competitive edge over competitors.

scholarly journals Foreign Aid Contribution for the Development of Nepal

2021 ◽  
pp. 162-169
Author(s):  
Anjay Kumar Mishra ◽  
P. S. Aithal
Keyword(s):  
Foreign Aid ◽  
Regression Line ◽  
Policy Research ◽  
Secondary Data ◽  
P Value ◽  
Infrastructure Development ◽  
Real Gdp ◽  
Normality Test ◽  
Lm Test ◽  
Error Terms

Purpose: Nepal is small and beautiful country with a great deficiency in infrastructure development. Foreign aid is believed as key component for development in Nepal. The Paper aims to assess foreign aid contribution for developing Nepal. Design/Methodology/Approach: The study is based on secondary data from 2001/02 to 2014/15 with special reference to Swiss aid. The correlation and regression with normality test have been applied to conform the contributory association among GDP, Swiss Aid and total Aid. Findings/Result: The real GDP and Aid are highly associated. The regression line is well fit and explained that 85 percent real GDP depends on Swiss aid and the remaining 14 percent other variables. The coefficient of LNTAD is 0.35 and it shows that one percent increase in the total aid increases real GDP by 0.35 percent. The coefficient of LNTAD is positive and significant, meaning that the increase in the total aid increases economic growth in Nepal. By using Brush- Godfery LM test, the P value is more than 5 five percent, which is 32 percent indicates that there is no autocorrelation among the error terms. Originality/Value: It is an empirical research to signify the contribution of aid for development of Nepal using inferential model. Paper Type: Analytical Policy Research

scholarly journals What Have We Learned from Empirical Studies of Unemployment Insurance?

ILR Review ◽  
1979 ◽  
Vol 33 (1) ◽  
pp. 95-95
Keyword(s):  
Uniform Distribution ◽  
Unemployment Insurance ◽  
Total Population ◽  
Empirical Studies ◽  
Policy Research ◽  
Review Article ◽  
Coverage Rate ◽  
Unemployment Duration ◽  
Waiting Period ◽  
The Mean

TIMOTHY J. CARR of Mathematica Policy Research, Inc. has brought to our attention an error in an example provided by Finis Welch in his July 1977 Review article, “What Have We Learned from Empirical Studies of Unemployment Insurance?” On page 459 Welch stated that under his assumptions (of a uniform distribution of unemployment duration from zero to twenty weeks and a two-week waiting period), the mean duration among those not receiving benefits, given an 80 percent coverage rate, would be six weeks. Actually, with an 80 percent coverage rate, the mean duration would be 7.43 weeks. According to Welch, this can be verified by the following calculations: With fraction, C, of the population covered and with 10 percent of covered employees not receiving benefits, the fraction of the total population not receiving benefits is [Formula: see text] and expected or mean duration is [Formula: see text] So, with C = 0.8, expected duration is (10.0 − 7.92) / (1 − .72) = 2.08/.28 = 7.43. EDITOR

Sign in / Sign up

Export Citation Format

Share Document