Evaluating Transportation by Comparing Several uses of Rotary Endodontic Files

ABSTRACT Aim To evaluate the frequent use of ProTaper Next (PTN; Dentsply Maillefer, Ballaigues, Switzerland) systems on shaping ability of root canal utilizing Solidworks (2014, Dassault Systèmes) software. Materials and methods Thirty-six root canals in clear resin blocks (Dentsply-Maillefer) were allocated into six experimental groups (n = 36). Six new sets of PTN instruments (Dentsply Maillefer, Ballaigues, Switzerland) were used six times to shape the resin blocks. A #15 K-file was inserted to the working length (WL), followed by ProGlider (PG) to create a glide path. Sequential use of PTN instrumentation in a crown-down technique was used to reach size (30/07) apically. Macroscopic photos of the blocks were taken before and after instrumentation, layered by Paint Shop Pro 9 from JascSoftware®, and then canal transportation was measured using Solidwork 2014. The data were analyzed by SPSS software version 22. Multivariate statistical analysis general linear model (GLM) was also applied. Bonferroni correction test was used in multiple comparisons and the statistical significance was set to 0.05. Results There was no difference in canal transportation resulted from utilizing PTN files after six multiple uses; in addition, the PTN files showed ability to maintain the original canal anatomy, especially in the apical level, where lowest total mean value of canal center displacement was seen (3 mm level) (0.019 ± 0.017). Conclusion ProTaper Next files can be used to prepare single and multiple canals in a single furcated tooth. Clinical significance ProTaper Next nickel-titanium (NiTi) file system is a safe instrument that respects the canal shape, allows practitioners to treat difficult cases with good results, and low risk of separation. How to cite this article Elemam RF, Capelas JA, Vaz MAP, Viriato N, Pereira ML, Azevedo A, West J. Evaluating Transportation by Comparing Several uses of Rotary Endodontic Files. J Contemp Dent Pract 2015;16(12):927-932.

Download Full-text

Shaping Ability, Cyclic Fatigue Resistance and Fractographic Analysis of Hybrid and Reciprocating Nickel Titanium Endodontic Instruments

Metals ◽

10.3390/met10020172 ◽

2020 ◽

Vol 10 (2) ◽

pp. 172 ◽

Cited By ~ 1

Author(s):

Saulius Drukteinis ◽

Vytaute Peciuliene ◽

Ruta Bendinskaite ◽

Vilma Brukiene ◽

Rasmute Maneliene ◽

...

Keyword(s):

Fatigue Resistance ◽

Root Canal ◽

Cyclic Fatigue ◽

Nickel Titanium ◽

Significance Level ◽

Root Canals ◽

Working Length ◽

Before And After ◽

Canal Transportation ◽

Shaping Ability

The aim of this study was to investigate the shaping ability and cyclic fatigue resistance of Genius (GN) and WaveOne (WO) nickel-titanium (NiTi) instruments. Forty mesial root canals of mandibular molars were randomly divided into two groups, according to the instrument system used for root canal preparation (n = 20): GN and WO. Root canals were prepared to the full working length using the crown-down technique, with up to 40.04 instruments for GN group and 40.08 instruments for WO group. Specimens were scanned with a µCT before and after instrumentation. The changes in 3D parameters and degree of canal transportation were evaluated in the apical, middle and coronal thirds of root canals. Size 25, taper 0.04 (GN) and 0.08 (WO) instruments (n = 20) were used in simulated root canals until fracturing, and the number of cycles to failure (NCF) was recorded. The fractured files were investigated under a scanning electron microscope to characterize fractured surfaces. Data were analyzed using ANOVA post hoc Tuckey’s tests with the significance level set at 5%. The GN system was able to prepare the higher percentage of the canal surface with less canal transportation in all root canal thirds and displayed the higher resistance to cyclic fatigue in comparison to WO instruments (p < 0.05). However, the length of the fractured segments was not significantly different among the groups; meanwhile, SEM investigations revealed the typical topographic characteristics of fractured surfaces. Hybrid GN instruments demonstrated superior shaping ability and resistance to cyclic fatigue. However, both NiTi instrument systems prepared the root canals with no significant shaping errors, considerable changes in 3D parameters and no significant differences in the topographic appearances of the instrument surfaces after fractures.

Download Full-text

Comparative evaluation of shaping ability of trunatomy and protaper gold files in curved canals using cone?beam computed tomography: An invitro study

IP Indian Journal of Conservative and Endodontics ◽

10.18231/j.ijce.2021.023 ◽

2021 ◽

Vol 6 (2) ◽

pp. 101-105

Author(s):

Kadam Krutika Kiran ◽

Vagarali Hemant ◽

Pujar Madhu A ◽

Tamase Aishwarya S ◽

Sahana Umesh

Keyword(s):

Computed Tomography ◽

Cone Beam Computed Tomography ◽

Root Canal ◽

Cone Beam ◽

Human Teeth ◽

Root Canals ◽

Before And After ◽

Canal Transportation ◽

Group 2 ◽

Shaping Ability

This study aimed to compare the canal transportation and canal centering ability in the preparation of curved root canals after instrumentation with TruNatomy (TN) (TN; Dentsply Sirona, Maillefer, Ballaigues, Switzerland) and ProTaper Gold (PG) (PG; Dentsply, Tulsa Dental Specialties, Tulsa, OK, USA) files using cone‑beam computed tomography (CBCT). 30 Single rooted extracted human teeth with root curvature ranging from 20-30° according to Schneider’s method were selected. Teeth with any visible cracks or fractures, calcifications, previous root canal treatments were excluded. The teeth were randomly assigned into two groups i.e. Group 1-TN and Group 2-PG (n = 15 each). The teeth were instrumented according to manufacturer’s guidelines for both the groups. Canals were scanned using a CBCT scanner before and after preparation to evaluate the transportation and centering ratio at 3 mm, 5 mm, and 7 mm from the apex. The data analysis was done using SPSS software and the test used was independent sample t test for comparison between the 2 groups.Data obtained suggested that TN group presented lesser canal transportation at the middle third of the root. The PG group showed better centering abitily at apical third of the root canal when both the groups were compared. TN resulted in less transportation than PG at the middle third, and PG showed better centering ability at the apical third. Overall, both systems safely prepared root canals, causing minimal errors.

Download Full-text

Increase the glyde path diameter improves the centering ability of F6 Skytaper

European Journal of Dentistry ◽

10.4103/ejd.ejd_231_17 ◽

2018 ◽

Vol 12 (01) ◽

pp. 089-093 ◽

Cited By ~ 8

Author(s):

Giuseppe Troiano ◽

Mario Dioguardi ◽

Armando Cocco ◽

Khrystyna Zhurakivska ◽

Domenico Ciavarella ◽

...

Keyword(s):

Lower Amount ◽

Photographic Images ◽

Root Canals ◽

Glide Path ◽

Before And After ◽

San Rafael ◽

Almost All ◽

The Impact ◽

Shaping Ability ◽

Different Levels

ABSTRACT Objective: The aim of this study was to assess the impact of glide path preparation, performed with PathGlider 0.15 (Komet Brasseler GmbH & Co., Lemgo, Germany) and PathGlider 0.20 (Komet Brasseler GmbH & Co., Lemgo, Germany), on the centering ability of 25-size F6 Skytaper in J-shape simulated root canals, compared with no glide path executed. Materials and Methods: Sixty J-shaped ISO 15 0.02 taper endo training blocks (Dentsply Maillefer) were assigned to three groups (n = 20 for each group). Photographic images were taken on endoblocks before and after shaping procedures. After superimposition, the software AutoCAD 2013 (Autodesk Inc., San Rafael, USA) was used for record the centering and shaping ability at 9 different levels from the apex. Results: Shaping procedures including the using of PathGlider 0.20 resulted in a lower amount of resin removed and in a clear improvement of centering ability of the Skytaper 0.25 at almost all reference point levels. Conclusions: Within the limitations of this study, it could be concluded that the glide path procedure, performed with the PathGlider 0.20 before the shaping with 25-size F6 Skytaper, might determine a lower amount of resin removed and a better centering ability compared with the groups without glide path procedure and those treated with PathGlider 0.15.

Download Full-text

Gentlefile Versus Protaper in the Shaping Ability in Simulated J-shaped Root Canals

10.21203/rs.3.rs-138390/v1 ◽

2021 ◽

Author(s):

Xixiong Chen ◽

Jiuyu Ge

Keyword(s):

High Speed ◽

Training Model ◽

Nickel Titanium ◽

Root Canals ◽

Before And After ◽

High Speed Rotation ◽

Speed Rotation ◽

Canal Transportation ◽

Shaping Ability ◽

Instrument Separation

Abstract Background: The aim of this study was to compare the shaping ability of Gentlefile (GF), a unique stainless-steel (SS) rotary system, and ProTaper (PT), a popular mechanical nickel-titanium (NiTi) system, in J-shaped simulated canals. Methods: Thirty-three resin blocks with a J-shaped canal were selected and randomly divided into 3 groups according to tip diameters: GF red (#23); PT F2(#25); GF blue (#26). They were prepared in one training model which imitated human dentition. Specimens were photographed by a dental operating microscope before and after preparation. The images were processed and measured using professional software. Centering ability and canal transportation were calculated, canal aberration and instrument separation were also recorded. Results: The GF system was significantly less transported than PT F2 in the apical and middle section. What’s more, better centering ability of GF was shown in all sections, including the coronal level. However, there was no difference between GF red and GF blue based on above criteria. Two cases of instrument separation of GF were noted.Conclusion: Under the conditions of this study, the two GF files showed better shaping ability, but were more easily separated than PT F2. As a novel SS rotary system, Gentlefile is more flexible to prepare narrow and curved root canals by scraping dentin with high-speed rotation, which might help remove smear layer much thoroughly and cause less dentin microcracks.

Download Full-text

Comparison of Canal Transportation and Centering Ability of One-G, EdgeGlidePath, and Neolix: A MicroComputed Tomography Study of Curved Root Canals

International Journal of Dentistry ◽

10.1155/2021/4898684 ◽

2021 ◽

Vol 2021 ◽

pp. 1-6

Author(s):

Shiva Shojaeian ◽

Niloofar Mortezapour ◽

Fatemeh Soltaninejad ◽

Nazanin Zargar ◽

Babak Zandi ◽

...

Keyword(s):

Root Canal ◽

Niti Alloy ◽

Microcomputed Tomography ◽

Micro Ct ◽

Root Canals ◽

Path Creation ◽

Glide Path ◽

Instrument Type ◽

Before And After ◽

Canal Transportation

Aims. A glide path is created prior to root canal instrumentation by nickel-titanium (NiTi) rotary files to increase the efficiency and safety of cleaning and shaping. This study aimed to assess root canal transportation in use of different glide path files in curved canals. Materials and Methods. 30 sound mesiobuccal root canals of mandibular molars with 20° to 40° curvature were selected and randomly assigned to 3 groups of EdgeGlidePath (EGP, EdgeEndo), One-G (Micro-Mega), and Neolix (Neoniti). The specimens were scanned before and after glide path creation by microcomputed tomography (micro-CT). The pre- and postoperative micro-CT scans were superimposed, and the degree of canal transportation and centering ratio were measured at 1, 3, 5, and 7 mm distances from the apical foramen. Statistical Analysis. The data were analyzed by two-way and one-way ANOVA. Results. The effects of distance from the apical foramen and instrument type and the interaction effect of the two were not significant on the centering ability of the files or canal transportation. Conclusion. EdgeGlidePath, One-G, and Neolix files fabricated from the conventional NiTi alloy or heat-treated M-Wire alloy showed similar performance regarding centering ability and canal transportation in glide path preparation in curved canals.

Download Full-text

The ability of Reciproc instruments to reach full working length without glide path preparation: a clinical retrospective study

PeerJ ◽

10.7717/peerj.3583 ◽

2017 ◽

Vol 5 ◽

pp. e3583 ◽

Cited By ~ 9

Author(s):

Andreas Bartols ◽

Bernt-Peter Robra ◽

Winfried Walther

Keyword(s):

Retrospective Study ◽

Root Canal ◽

Primary Root ◽

Primary Treatment ◽

Endodontic Treatment ◽

Binary Logistic Regression Model ◽

Root Canals ◽

Maxillary Molars ◽

Glide Path ◽

Working Length

Background Reciproc instruments are the only contemporary root canal instruments where glide path preparation is no longer strictly demanded by the manufacturer. As the complete preparation of root canals is associated with success in endodontic treatment we wanted to assess the ability and find predictors for Reciproc instruments to reach full working length (RFWL) in root canals of maxillary molars in primary root canal treatment (1°RCTx) and retreatment (2°RCTx) cases. Methods This retrospective study evaluated 255 endodontic treatment cases of maxillary molars. 180 were 1°RCTx and 75 2°RCTx. All root canals were prepared with Reciproc instruments. The groups were compared and in a binary logistic regression model predictors for RFWL were evaluated. Results A total of 926 root canals were treated with Reciproc without glide path preparation. This was possible in 885 canals (95.6%). In 1°RCTx cases 625 of 649 (96.3%) canals were RFWL and in 2°RCTx cases 260 of 277 (93.9%). In second and third mesiobuccal canals (MB2/3) 90 out of 101 (89.1%) were RFWL with Reciproc in 1°RCTx and in the 2°RCTx treatment group 49 out of 51 cases (96.1%). In mesio-buccal (MB1) canals “2°RCTx” was identified as negative predictor for RFWL (OR 0.24 (CI [0.08–0.77])). In MB2/3 canals full working length was reached less often (OR 0.04 (CI [0.01–0.31])) if the tooth was constricted and more often if MB2/3 and MB1 canals were convergent (OR 4.60 (CI [1.07–19.61])). Discussion Using Reciproc instruments, the vast majority of root canals in primary treatment and retreatment cases can be prepared without glide path preparation.

Download Full-text

Micro-Computed Tomography (Micro-CT) Evaluation of Effects of Different Rotary Glide Path Techniques on Canal Transportation and Centering in Curved Root Canals

Medical Science Monitor ◽

10.12659/msm.916112 ◽

2019 ◽

Vol 25 ◽

pp. 6351-6358

Author(s):

Gabrielė Česaitienė ◽

Tadas Venskutonis ◽

Vita Mačiulskienė ◽

Vaidotas Cicėnas ◽

Vykintas Samaitis ◽

...

Keyword(s):

Computed Tomography ◽

Micro Ct ◽

Micro Computed Tomography ◽

Root Canals ◽

Glide Path ◽

Ct Evaluation ◽

Canal Transportation ◽

Curved Root Canals

Download Full-text

Safe Mechanical Preparation with Reciprocation Movement without Glide Path Creation: Result from a Pool of 673 Root Canals

Brazilian Dental Journal ◽

10.1590/0103-6440201600334 ◽

2016 ◽

Vol 27 (1) ◽

pp. 22-27 ◽

Cited By ~ 13

Author(s):

Evaldo Rodrigues ◽

Gustavo De-Deus ◽

Erick Souza ◽

Emmanuel João Nogueira Leal Silva

Keyword(s):

Case Series ◽

Frequency Distributions ◽

Root Canals ◽

Path Creation ◽

Glide Path ◽

Mechanical Preparation ◽

Case Series Study ◽

Working Length ◽

Manufacturer Recommendation ◽

Total Pool

Abstract The aim of the present study was to prospectively assess the frequency of teeth in which the Reciproc instruments were able to reach the full working length (WL). This case series study enrolled 277 consecutive teeth requiring primary endodontic treatment performed with the Reciproc system (VDW) without a previous glide path by 3 experienced endodontists. Instruments R25, R40 or R50 were selected, respectively, for narrow, medium and large canals, according to the preoperative radiographs, as per manufacturer recommendation. Canals were instrumented and classified as reaching the full WL (RFWL) and not reaching the full WL (NRFWL), according to the ability of the Reciproc instrument to reach without a glide path the full electronically determined WL. Finally, canals were filled using a single matched cone technique. Pearson's squared-chi test compared the frequency distributions of canals classified as RFWL and NRFWL. From a total pool of 673 root canals, Reciproc instruments reached the FWL in 96.28% of cases and 3 fractures occurred. For narrow canals the percentage of RFWL was 95.37% with 3 fractures. For medium and large canals, the R40 or R50 instruments reached the FWL in 98.51% and 97.62% of the cases respectively, with no fracture. Enlarging of root canals using the Reciproc instruments up to the FWL without a glide path is successful in a great percentage of cases. This case series suggests the possibility of using a single instrument to enlarge the root canal space of teeth by a simpler approach without an a prioriglide path procedure.

Download Full-text

Shaping Ability of XP Endo Shaper File in Curved Root Canal Models

International Journal of Dentistry ◽

10.1155/2020/4687045 ◽

2020 ◽

Vol 2020 ◽

pp. 1-6 ◽

Cited By ~ 2

Author(s):

Abdulmohsen Alfadley ◽

Abdalrhman Alrajhi ◽

Hamad Alissa ◽

Faisal Alzeghaibi ◽

Lubna Hamadah ◽

...

Keyword(s):

Body Temperature ◽

File Systems ◽

Lower Number ◽

Significance Level ◽

Root Canals ◽

Shaping Time ◽

Significant Difference ◽

Before And After ◽

Canal Shaping ◽

Shaping Ability

The aim of this study was to assess the shaping ability of the XP Shaper (XPS) file in severely curved canal models under simulated body temperature and compare it with that of the WaveOne Gold (WOG) file. Ninety-six simulated root canals were equally distributed into XPS and WOG systems to be shaped by eight files each. Files were assessed under a stereomicroscope prior to canal shaping to detect deformation if any. The canals were shaped at 35 ± 1°C using the X-Smart Plus motor. Images of the canals were obtained before and after instrumentation using a stereomicroscope to measure the amount of removed resin from both the inner and outer curvature sides at apex (0 mm) and 3 mm and 6 mm from the apex. The shaping time was calculated. The data were statistically analyzed by the independent t-test at 5% significance level. The XPS and WOG systems shaped the canals in 37.0 ± 9.5 and 62.6 ± 11.3 seconds (P<0.05), respectively. At the apex level, the amount of resin removal in both sides did not show a significant difference between the tested groups (P>0.05). At 3 mm and 6 mm levels, the WOG removed more resin than XPS at both sides (P<0.05). In XPS, deformation was observed in four files: one file after the first use, one file after the fourth use, and two files after the sixth use. In WOG, two files were deformed: one file after the fifth use and one file after the sixth use. One XPS file was fractured after the sixth use. In short, XPS and WOG files can be used in shaping severely curved canals as they showed the ability to maintain the original shape with minimal transportation. Both file systems showed signs of deformation after use with a lower number of deformed files observed in WOG throughout the experiment.

Download Full-text

Microscopic and Chemical Assessments of the Filling Ability in Oval-Shaped Root Canals Using Two Different Carrier-Based Filling Techniques

European Journal of Dentistry ◽

10.1055/s-0039-1695661 ◽

2019 ◽

Vol 13 (02) ◽

pp. 166-171 ◽

Cited By ~ 4

Author(s):

Davide Mancino ◽

Naji Kharouf ◽

Joseph Hemmerlé ◽

Youssef Haïkel

Keyword(s):

Electron Microscope ◽

Statistical Significance ◽

Analysis Data ◽

Dentinal Tubules ◽

X Ray ◽

Root Canals ◽

Gutta Percha ◽

Filling Ability ◽

Working Length ◽

Scanning Electron

Abstract Objectives The aim of this study was to assess the filling ability in oval-shaped canals using two different carrier-based filling techniques. Materials and Methods Twenty-four human mandibular premolars with one oval canal were selected. Canals were shaped using WaveOne Gold Primary and ProGlider. Samples were divided into two groups and filled as follows: Thermafil and GuttaCore. The proportions of gutta-percha-filled areas (GPFAs), sealer-filled areas (SFAs), and void areas (VA), at 2 and 5 mm, were analyzed using optical numeric microscope, scanning electron microscope, and energy-dispersive X-ray. Statistical Analysis Data were compared by Kruskal–Wallis one-way analysis of variance on ranks, with statistical significance set at α = 0.05. Results At 2 and 5 mm distances from the apex, this study discloses no statistically different filling ability for the two techniques. Concerning each sample treated using both filling systems, the presence of tags was visualized. At working length (WL)-5, and WL-2, the maximum tag penetration depth for the GuttaCore group into the dentinal tubules was, respectively, 96 μm and 48 μm, whereas the values in the thermafil group were 109 μm, and 55 μm, respectively. Conclusions Our results clearly show that Thermafil and GuttaCore can fill oval-shaped canals in appropriate way. Furthermore, we can state that the GuttaCore obturator allows to preserve the same filling ability than Thermafil obturator, in view of the fact that there was no difference, in terms of GPFA, SFA, and VA between the two different carrier-based obturation techniques.

Download Full-text