scholarly journals Numerical study of the aerodynamic characteristics of an axisymmetric profile of an optimized shape

2021 ◽  
pp. 5-11
Keyword(s):  
Gas Flow ◽  
Aerodynamic Drag ◽  
Numerical Study ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Ansys Fluent ◽  
Inviscid Gas ◽  
Speed Up ◽  
The Cost ◽  
Different Characteristics

Today, one of the important and urgent tasks of the aerodynamics science is the study and op-timization of aerodynamic characteristics of optimized profile shapes in a gas flow. This problem arises in the design of aircraft and various vessels and is associated with a rational choice of profile shape for a large number of different characteristics and, in particular, in terms of aerodynamic drag. In this paper, consider methods for optimizing an axisymmetric aerodynamic profile in a sta-tionary laminar inviscid gas flow at different angles of attack. The proposed method of solv-ing such a problem of optimization and numerical study of aerodynamic characteristics of the described body in the flow is relevant due to the complexity of its solution, for example, by traditional methods based on the Navier-Stokes system of differential equations. Experi-mental methods are based on expensive and time-consuming tools that do not guarantee find-ing the optimum. Such a computing tool as Ansys Fluent is well suited for solving such prob-lems of hydroaerodynamics and allows not only to speed up and reduce the cost of the compu-tational experiment, but also to increase the efficiency of its implementation. The article describes the process of finding the optimum, which reduces to minimizing the drag force of the previously described axisymmetric profile. A description is also given of the wing

An Experimental and Numerical Investigation of the Effect of Combustor-Nozzle Platform Misalignment on Endwall Heat Transfer at Transonic High Turbulence Conditions

2016 ◽  
Author(s):  
A. Arisi ◽  
D. Mayo ◽  
Z. Li ◽  
W. F. Ng ◽  
H. K. Moon ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Numerical Study ◽  
Horseshoe Vortex ◽  
Aerodynamic Characteristics ◽  
Secondary Flows ◽  
Navier Stokes ◽  
Vortex System ◽  
Ansys Fluent ◽  
Heat Transfer Augmentation ◽  
Exit Mach Number

A detailed experimental and numerical study has been conducted to investigate the endwall heat transfer characteristics on a nozzle platform that has been misaligned with the combustor exit, resulting in a backward facing step at the nozzle inlet. The study was carried out under transonic engine representative conditions with an exit Mach number of 0.85 (Reexit = 1.5 × 106), and an inlet turbulence intensity of 16%. A transient infrared thermography technique coupled with endwall static pressure ports, were used to map the endwall surface heat transfer and aerodynamic characteristics respectively. A numerical study was also conducted by solving the steady state Reynolds Averaged Navier Stokes (RANS) equations using the commercial CFD solver ANSYS Fluent v.15. The numerical results were then validated by comparing to experiment data and good agreement was observed. The results reveal that the classical endwall secondary flows (endwall crossflows, horseshoe and passage vortices) are weakened and a unique auxiliary vortex system develops within the passage and interacts with the weakened horseshoe vortex. It is observed that heat transfer in the first half of the passage endwall is heavily influenced by this auxiliary vortex system. Heat transfer augmentation of between 15% and 40% was also observed throughout the NGV endwall. Furthermore, the auxiliary vortex system results in a delayed cross-passage migration of the horseshoe vortex which consequently results in large lateral gradient in heat transfer downstream of the throat.

Numerical Study on the Removal of Hydrogen and Nitrogen from the Melt of Medium Carbon Steel in Vacuum Tank Degasser

2013 ◽  
Vol 762 ◽  
pp. 253-260 ◽  
Author(s):  
Shan Yu ◽  
Jyrki Miettinen ◽  
Seppo Louhenkilpi
Keyword(s):  
Carbon Steel ◽  
Liquid Steel ◽  
Gas Flow ◽  
Numerical Study ◽  
Vacuum Treatment ◽  
Medium Carbon Steel ◽  
Transfer Coefficients ◽  
Ansys Fluent ◽  
Medium Carbon ◽  
Cell Expression

The steelmaking field has been seeing an increased demand of reducing hydrogen and nitrogen in liquid steel before casting. This is often accomplished by vacuum treatment. This paper focuses on developing a numerical model to investigate the removal of hydrogen and nitrogen from the melt of medium carbon steel in a commercial vacuum tank degasser. An activity coefficient model and the eddy-cell expression are implemented in the ANSYS FLUENT code to compute the activities of related elements and mass transfer coefficients of hydrogen and nitrogen in liquid steel. Several cases are simulated to assess the effect of gas flow rate and initial nitrogen content in liquid steel on degassing process and the calculated results are compared with industrial measured data.

Numerical study of the aerodynamic and power characteristics of the cycloidal rotor, under incoming flow

2019 ◽  
pp. 25-34
Author(s):  
Александр Анатольевич Дектерев ◽  
Артем Александрович Дектерев ◽  
Юрий Николаевич Горюнов
Keyword(s):  
Flow Velocity ◽  
Numerical Study ◽  
Lift Coefficient ◽  
Simulation Method ◽  
Aerodynamic Characteristics ◽  
Incoming Flow ◽  
Ansys Fluent ◽  
Energy Characteristics ◽  
Power Characteristics ◽  
Calculation Results

Исследование направлено на разработку и апробацию методики численного моделирования аэродинамических и энергетических характеристик циклоидального ротора. За основу взята конфигурация ротора IAT21 L3. Для нее с использованием CFD-пакета ANSYS Fluent построена математическая модель и выполнен расчет. Проанализировано влияние скорости набегающего потока воздуха на движущийся ротор. Математическая модель и полученные результаты исследования могут быть использованы при создании летательных аппаратов с движителями роторного типа. This article addresses the study of the aerodynamic and energy characteristics of a cycloidal rotor subject to the influence of the incoming flow. Cycloidal rotor is one of the perspective devices that provide movement of aircrafts. Despite the fact that the concept of a cycloidal rotor arose in the early twentieth century, the model of a full-scale aircraft has not been yet realized. Foreign scientists have developed models of aircraft ranging in weight from 0.06 to 100 kg. The method of numerical calculation of the cycloidal rotor from the article [1] is considered and realized in this study. The purpose of study was the development and testing of a numerical simulation method for the cycloidal rotor and study aerodynamic and energy characteristics of the rotor in the hovering mode and under the influence of the oncoming flow. The aerodynamic and energy characteristics of the cycloidal rotor, rotating at a speed of 1000 rpm with incoming flow on it with velocities of 20-80 km/h, were calculated. The calculation results showed a directly proportional increase of thrust with an increase of the incoming on the rotor flow velocity, but the power consumed by the rotor was also increased. Increase of the incoming flow velocity leads to the proportional increasing of the lift coefficient and the coefficient of drag. Up to a speed of 80 km/h, an increase in thrust and power is observed; at higher speeds, there is a predominance of nonstationary effects and difficulties in estimating the aerodynamic characteristics of the rotor. In the future, it is planned to consider the 3D formulation of the problem combined with possibility of the flow coming from other sides.

Numerical Study on Control of Sunroof Buffeting

2021 ◽  
Vol 13 (2) ◽  
Author(s):  
K. Vijaykumar ◽  
S. Poonkodi ◽  
A.T. Sriram
Keyword(s):  
Numerical Study ◽  
Leading Edge ◽  
Dominant Frequency ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Ansys Fluent ◽  
Flow Modification ◽  
Numerical Result ◽  
Modification Technique ◽  
Commercial Solver

Sunroof has become one of the essential features of a luxury car, and it provides natural air circulation and good illumination into the car. But the primary problem associated with it is the buffeting noise which causes discomfort to the passengers. Though adequate studies were carried out on sunroof buffeting, efficient control techniques are needed to be developed from fundamental mechanism. To reduce the buffeting noise, flow modifications at the entrance of the sunroof is considered in this study. The internal portion of the car with sunroof is simplified into a shear driven open cavity, and two-dimensional numerical simulations are carried out using commercial solver, ANSYS Fluent. Reynolds averaged Navier-Stokes equation is used with the realizable k-? turbulence model. The unsteady numerical result obtained in this study is validated with the available experimental results for the dominant frequency. The prediction is good agreement with experiment. Flow modification technique is proposed to control the sunroof buffeting by implementing geometric modifications. A hump has been placed near the leading edge of the cavity which resulted in significant reduction of pressure oscillations. Parametric studies have been performed by varying the height of hump and the distance of hump from the leading edge. There is no prominent difference when the height of the hump is varied. As the distance of the hump from the leading edge is reduced, the sound pressure level decreases.

Arriving at the Optimum Overlap Ratio for an Elliptical-Bladed Savonius Rotor

2017 ◽  
Author(s):  
Nur Alom ◽  
Ujjwal K. Saha
Keyword(s):  
Numerical Study ◽  
Superior Performance ◽  
Navier Stokes ◽  
Speed Ratio ◽  
Small Scale ◽  
Efficient Manner ◽  
Ansys Fluent ◽  
Savonius Rotor ◽  
Velocity Magnitude ◽  
Overlap Ratio

The Savonius rotor appears to be particularly promising for the small-scale applications because of its design simplicity, good starting ability, and insensitivity to wind directions. There has been a growing interest in recent times to harness wind energy in an efficient manner by developing newer blade profiles of Savonius rotor. The overlap ratio (OR), one of the important geometric parameters, plays a crucial role in the turbine performance. In a recent study, an elliptical blade profile with a sectional cut angle (θ) of 47.5° has demonstrated its superior performance when set at an OR = 0.20. However, this value of OR is ideal for a semicircular profile, and therefore, requires further investigation to arrive at the optimum overlap ratio for the elliptical profile. In view of this, the present study attempts to make a systemic numerical study to arrive at the optimum OR of the elliptical profile having sectional cut angle, θ = 47.5°. The 2D unsteady simulation is carried out around the elliptical profile considering various overlap ratios in the range of 0.0 to 0.30. The continuity, unsteady Reynolds Averaged Navier-Stokes (URANS) equations and two equation eddy viscosity SST (Shear Stress transport) k-ω model are solved by using the commercial finite volume method (FVM) based solver ANSYS Fluent. The torque and power coefficients are calculated as a function of tip speed ratio (TSR) and at rotating conditions. The total pressure, velocity magnitude and turbulence intensity contours are obtained and analyzed to arrive at the intended objective. The numerical simulation demonstrates an improved performance of the elliptical profile at an OR = 0.15.

The Reynold’s Number Effect in High Swirling Flow in Unconfined Burner

2015 ◽  
Vol 72 (4) ◽  
Author(s):  
Norwazan A. R. ◽  
Mohammad Nazri Mohd. Jaafar
Keyword(s):  
Turbulent Flows ◽  
Gas Turbines ◽  
Swirling Flow ◽  
Numerical Study ◽  
Isothermal Condition ◽  
Navier Stokes ◽  
Reacting Flow ◽  
Ansys Fluent ◽  
Inlet Velocity ◽  
Burner Exit

The numerical simulations of swirling turbulent flows in isothermal condition in combustion chamber of burner were investigated. The aim is to characterize the main flow structures and turbulence in a combustor that is relevant to gas turbines. Isothermal flows with different inlet flow velocities were considered to demonstrate the effect of radial velocity. The inlet velocity, Uo is varied from 30 m/s to 60 m/s represent a high Reynolds number up to 3.00 X 105. The swirler was located at the upstream of combustor with the swirl number of 0.895. A numerical study of non-reacting flow in the burner region was performed using ANSYS Fluent. The Reynolds–Averaged Navier–Stokes (RANS) approach method was applied with the standard k-ɛ turbulence equations. The various velocity profiles were different after undergoing the different inlet velocity up to the burner exit. The results of velocity profile showed that the high U0 give better swirling flow patterns.

scholarly journals Numerical Study of the Generic Sports Utility Vehicle Design with a Drag Reduction Add-On Device

2014 ◽  
Vol 2014 ◽  
pp. 1-17 ◽  
Author(s):  
Shubham Singh ◽  
M. Zunaid ◽  
Naushad Ahmad Ansari ◽  
Shikha Bahirani ◽  
Sumit Dhall ◽  
...  
Keyword(s):  
Drag Reduction ◽  
Drag Coefficient ◽  
Aerodynamic Drag ◽  
Numerical Study ◽  
Fuel Efficiency ◽  
Ansys Fluent ◽  
Mean Pressure ◽  
Aerodynamic Drag Coefficient ◽  
Total Base ◽  
Aerodynamic Parameters

CFD simulations using ANSYS FLUENT 6.3.26 have been performed on a generic SUV design and the settings are validated using the experimental results investigated by Khalighi. Moreover, an add-on inspired by the concept presented by Englar at GTRI for drag reduction has been designed and added to the generic SUV design. CFD results of add-on model and the basic SUV model have been compared for a number of aerodynamic parameters. Also drag coefficient, drag force, mean surface pressure, mean velocities, and Cp values at different locations in the wake have been compared for both models. The main objective of the study is to present a new add-on device which may be used on SUVs for increasing the fuel efficiency of the vehicle. Mean pressure results show an increase in the total base pressure on the SUV after using the device. An overall reduction of 8% in the aerodynamic drag coefficient on the add-on SUV has been investigated analytically in this study.

Studies on Aerodynamic Characteristics of Dump Diffusers for Modern Aircraft Engines

2012 ◽  
Vol 232 ◽  
pp. 246-251 ◽  
Author(s):  
P. Sathyan ◽  
S. Srikanth ◽  
I. Dheepan ◽  
M. Arun ◽  
C. Aswin ◽  
...  
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Fluid Dynamic ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Finite Volume Scheme ◽  
Aircraft Engines ◽  
Navier Stokes Equations ◽  
Dynamic Constraints ◽  
Fully Implicit

The geometrical optimization of dump diffusers are extremely demanding as the flow fields and stress fields are very complex and must be well understood to achieve the required design efficiencies. In this paper parametric analytical studies have been carried out for examining the aerodynamics characteristics of different dump diffusers for modern aircraft engines. Numerical studies have been carried out using SST K- ω turbulence model. This code solves SST k- ω turbulence equations using the coupled second order implicit unsteady formulation. In the numerical study, a fully implicit finite volume scheme of the compressible, Reynolds-Averaged, Navier-Stokes equations is employed. We concluded that in addition to the dump gap ratio, the aerodynamic shape of the flame tube case and the other geometric variables are also need to be optimized judiciously after considering the fluid dynamic constraints for controlling the pressure recovery and the losses.

scholarly journals Effect of Leading-Edge Bulges on Aerodynamic Characteristics of Bionic Wingsail

2021 ◽  
Author(s):  
Chen Li ◽  
Peiting Sun ◽  
Hongming Wang
Keyword(s):  
Stokes Equations ◽  
Lift Coefficient ◽  
Leading Edge ◽  
Aerodynamic Characteristics ◽  
Navier Stokes ◽  
Suction Surface ◽  
Ansys Fluent ◽  
Navier Stokes Equations ◽  
Extension Direction ◽  
Lift And Drag

The leading-edge bulges along the extension direction are designed on the marine wingsail. The height and the spanwise wavelength of the protuberances are 0.1c and 0.25c, respectively. At Reynolds number Re=5×105, the Reynolds Averaged Navier-Stokes equations are applied to the simulation of the wingsail with the bulges thanks to ANSYS Fluent finite-volume solver based on the SST K-ω models. The grid independence analysis is carried out with the lift and drag coefficients of the wingsail at AOA = 8° and AOA=20°. The results show that while the efficiency of the wingsail is reduced by devising the leading-edge bulges before stall, the bulges help to improve the lift coefficient of the wingsail when stalling. At AOA=22° under the action of the leading-edge tubercles, a convective vortex is formed on the suction surface of the modified wingsail, which reduces the flow loss. So the bulges of the wingsail can delay the stall.

scholarly journals To the issue of evaluating sonic boom overpressure and loudness

2019 ◽  
Vol 304 ◽  
pp. 02003
Author(s):  
Igor G. Bashkirov ◽  
Sergey L. Chernyshev ◽  
Vladlen S. Gorbovskoy ◽  
Andrey V. Kazhan ◽  
Vyacheslav G. Kazhan ◽  
...  
Keyword(s):  
Software Package ◽  
Stokes Equations ◽  
Aerodynamic Drag ◽  
Near Field ◽  
Theoretical Data ◽  
Aerodynamic Characteristics ◽  
Sonic Boom ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Computational Mesh

At present, in the world there is a growing interest in the development of a new generation of supersonic passenger aircraft. One of the main problems of creating such aircraft is to ensure both an acceptable sonic boom level and high aerodynamic characteristics in the supersonic cruising mode. This requires the development of reliable methods for obtaining the near field under the plane with taking into account the influence of the boundary layer, calculation of overpressure signature on the ground and evaluation of sonic boom loudness. In this work four variants of the equivalent body of revolution of minimum sonic boom with different nose sharpening were investigated for an aircraft weighing 19 tons in supersonic cruising flight at Mach number of 1.7 and altitude of 15.5 km using the software package for solving the Reynolds–averaged Navier–Stokes equations (RANS) ANSYS CFX. A macro for calculating the overpressure signature on the ground for the distribution of disturbances in the near field under the aircraft and a program for evaluating the sonic boom loudness in various metrics were developed. Computational mesh verification of the results was carried out, the obtained overpressure signatures were compared with theoretical data and calculation results from the software package for the integration of complete system of Euler equations by finite–difference method X–CODE. The effect of the sharpening of the nose part on aerodynamic drag and sound boom characteristics was shown. The work was done in the interests of the international project RUMBLE (RegUlation and norM for low sonic Boom LEvels).

Sign in / Sign up

Export Citation Format

Share Document