scholarly journals RESEARCH CONCERNING THE SIMULATION OF THE OPERATION OF CONVENTIONAL SUCKER ROD PUMPING UNITS

2021 ◽  
Vol 2(73) (2) ◽  
pp. 33-39
Author(s):  
Georgeta Toma ◽  
Keyword(s):  
Computer Program ◽  
Calculation Method ◽  
Operating Parameters ◽  
Motor Torque ◽  
Sucker Rod ◽  
Pumping Unit ◽  
Pumping Units

In the paper is presented a method for obtaining the variation during a cinematic cycle of the motor torque at the crankshaft in the case of the conventional sucker rod pumping units. The calculation method has been transposed into a computer program which allows establishing the influence of different constructive and operating parameters of the pumping units on the variation of the motor torque at the crankshaft. Finally, a series of results of the simulations performed in the case of a C-640D-305-120 pumping unit are presented.

Research Concerning the Identification of Some Parameters of a Sucker Rod Pumping Unit

2017 ◽  
Vol 68 (10) ◽  
pp. 2289-2292
Author(s):  
Dorin Badoiu ◽  
Georgeta Toma
Keyword(s):  
Computer Program ◽  
Essential Role ◽  
Automated Systems ◽  
Maintenance Costs ◽  
Motor Torque ◽  
Unit Process ◽  
Sucker Rod ◽  
Pumping Unit

One of the solutions to reduce the production and maintenance costs of the sucker rod pumping installations is to develop automated systems for regulating and controlling their operations. The development of these automated systems requires an attentive modeling of the dynamics of the mechanism of the pumping unit, process in which the identification of the values of the parameters involved in the calculations plays an essential role. The paper presents the manner of determining the values of some parameters of the mechanism of a C-320D-256-100 pumping unit starting from the variation on a cinematic cycle of the motor torque at the crank shaft. Simulations were performed with a computer program developed by the authors, and the experimental records were processed with the program Total Well Management.

scholarly journals Research Concerning the Influence of Balancing the Conventional Pumping Units on their Dynamics

2021 ◽  
Vol 72 (2) ◽  
pp. 178-185
Author(s):  
Dorin Badoiu
Keyword(s):  
Computer Program ◽  
Motor Torque ◽  
Pumping Unit ◽  
Pumping Units

The paper analyses the influence of the rotary balancing and of the combined balancing (rotary and oscillating) on the variation of the motor torque at the crankshaft and on the variation of the connection forces acting in the joints of the mechanism of the conventional pumping units. For this purpose a computer program has been developed and a series of results in the case of a C-640D-305-120 pumping unit are presented.

scholarly journals Research Concerning the Optimization of the Mechanism of the Conventional Sucker Rod Pumping Units

2019 ◽  
Vol 70 (5) ◽  
pp. 1795-1799
Author(s):  
Georgeta Toma
Keyword(s):  
Dynamic Analysis ◽  
Operating Parameters ◽  
Optimal Solutions ◽  
Structural Elements ◽  
Sucker Rod ◽  
Pumping Unit ◽  
Pumping Equipment ◽  
Pumping Units

Finding optimal solutions to design the mechanism of the conventional sucker rod pumping units is always present due to many problems that involve. The study in this case involves both the cinematic and dynamic analysis of the mechanism of the conventional pumping units, making sure that the optimization solution maintain unchanged certain operating parameters of the pumping equipment such as the stroke of the sucker rod column. In the paper is presented a method of determining the optimal dimensions of the structural elements of the mechanism of the conventional pumping units in order to reduce the maximum values of the connection forces in the bearings in the conditions of maintaining unchanged the stroke of the sucker rod column. The simulations have been performed in the case of a C-640D-305-120 pumping unit.

Research Concerning the Kinetostatic Analysis of the Mechanism of the Conventional Sucker Rod Pumping Units

2018 ◽  
Vol 69 (7) ◽  
pp. 1855-1859
Author(s):  
Dorin Badoiu ◽  
Georgeta Toma
Keyword(s):  
Computer Program ◽  
Programming Environment ◽  
Sucker Rod ◽  
Pumping Units

It is well known that the bearings of the mechanism of the conventional pumping units are heavily loaded so that their design has to be accomplished very carefully. In this scope the values of the connection forces acting on these bearings has to be determined as accurately as possible. In the paper is presented the kinetostatic analysis of the mechanism of the conventional sucker rod pumping units, obtaining in this way the values of the connection forces in the joints and of the motor moment at the cranks shaft. For processing the experimental records it has been used the program Total Well Management. The simulations have been performed with a computer program developed by the authors using Maple programming environment.

scholarly journals Research Concerning the Dynamic Model of the Conventional Sucker Rod Pumping Units

2019 ◽  
Vol 70 (8) ◽  
pp. 2818-2821
Author(s):  
Georgeta Toma
Keyword(s):  
Computer Program ◽  
Dynamic Model ◽  
Angular Speed ◽  
Management Program ◽  
Programming Environment ◽  
Synthesis Parameters ◽  
Mass Moment ◽  
Sucker Rod ◽  
Mass Moment Of Inertia ◽  
Pumping Units

The study of the dynamic model of the conventional sucker rod pumping units requires first determining the variation on the cinematic cycle of the synthesis parameters (the reduced moment and the reduced mass moment of inertia) and then the variation of the angular speed of the cranks, in response to the dynamic and resistant actions on the component elements that appear during operation. The paper presents the way of determining the variation on the cinematic cycle of the synthesis parameters of the dynamic model corresponding to the conventional pumping unit mechanism and of the variation of the angular speed of its cranks. The experimental records have been processed with the Total Well Management program. The simulations have been performed with a computer program developed by the author using the Maple programming environment.

Design and Analysis of Hydraulic Pumping Units

2007 ◽  
Author(s):  
Guixi Li ◽  
Rujian Ma ◽  
Jungang Wang
Keyword(s):  
Dynamic Response ◽  
Head Movement ◽  
Dynamic Stress ◽  
Dynamic Performance ◽  
The Other ◽  
Mechanical Vibrations ◽  
Maximum Displacement ◽  
Sucker Rod ◽  
Pumping Unit ◽  
Pumping Units

The dynamic performance of hydraulic beam pumping units was analyzed in this paper by using the theory of mechanical vibrations. The house-head movement of the pumping unit is mainly uniform, except the alternation period of upper- and down-strokes. Under the action of the house-head movement, the vibration of the system, the sucker-rod and, furthermore, the dynamic stress will be induced. The results indicate that the movement of the downhole pump includes two parts. One is the movement following the horse-head. The other is the dynamic response excited by the support movement. When the parameters of the system are selected reasonably, over-stroke of the pump will appear. This is because the movement of the hydraulic piston obeys a particular law. The maximum displacement increases, and the maximum dynamic stress decreases with depth. The changing of maximum dynamic stress with depth obeys quadratic law.

scholarly journals Determination of the state and functioning of the equipment of rod well pumping units in the operation process by the parameters of the wattmetrogram

2021 ◽  
Vol 23 (3) ◽  
pp. 142-154
Author(s):  
V. A. Manakhov ◽  
A. N. Tsvetkov
Keyword(s):  
Control Method ◽  
Technical Condition ◽  
Software Environment ◽  
Matlab Software ◽  
Operation Process ◽  
Amplitude Spectra ◽  
Sucker Rod ◽  
Pumping Unit ◽  
Pumping Units

TARGET. The purpose of this work is to develop a method for diagnostics of equipment of sucker rod pumping units (SRPU) during operation according to the parameters of the wattmetrogram. A wattmetering module is used as a measuring element, the developed software in the MatLab software package serves as a tool for processing vibration signals. The technical condition of the sucker rod pumping unit is analyzed by the parameters of the wattmetrogram and the amplitude spectra of the object under study, formed using the fast Fourier transform procedure in the MatLab software environment.METHODS. The wattmetering method allows you to control the sucker rod-pumping unit during its operation under voltage. This control method is highly accurate, sensitive to developing defects, and allows the use of computer technologies for signal processing and analysis.RESULTS. The wattmetering method is fully disclosed. The construction of the spectrum is considered. The relationship between the wattmetrogram and the dynamogram has been established. The removal and evaluation of experimental data from the operating sucker-rod pumping unit during its operation was carried out. A wattmetrogram and a dynamogram were built, a spectrum was also built, which showed the presence of defects in this installation.CONCLUSION. This method of wattmetering with the MatLab software allows you to monitor the technical condition of the sucker rod pumping unit according to the amplitude-frequency characteristics of the wattmetrogram parameters.

scholarly journals Research Concerning the Correlations Between Some Experimental Results in the Case of a Sucker Rod Pumping Installation

2018 ◽  
Vol 69 (11) ◽  
pp. 3060-3063
Author(s):  
Dorin Badoiu ◽  
Georgeta Toma
Keyword(s):  
Computer Program ◽  
Rotation Speed ◽  
Experimental Results ◽  
Programming Environment ◽  
Sucker Rod ◽  
Pumping Unit ◽  
Polished Rod

In the paper are analyzed the correlations between the experimental results obtained for the instantaneous rotation speed of the cranks shaft of a conventional sucker rod pumping installation and the speed and the acceleration at the end of the polished rod. The correlations have been established by analyzing the kinematics of the mechanism of the sucker rod pumping unit. The experimental records have been processed with the program Total Well Management. A computer program for performing the simulations has been developed by the authors using Maple programming environment.

scholarly journals Research Concerning the Use of Polynomial Functions in the Study of the Conventional Sucker Rod Pumping Units

2019 ◽  
Vol 70 (4) ◽  
pp. 1223-1227
Author(s):  
Dorin Badoiu
Keyword(s):  
Computer Program ◽  
Polynomial Functions ◽  
Programming Environment ◽  
Dynamic Parameters ◽  
Structural Elements ◽  
Functional Optimization ◽  
Precise Form ◽  
Proper Functioning ◽  
Sucker Rod ◽  
Pumping Units

The analysis of the conventional sucker rod pumping units and especially their dynamics is laborious and requires a large amount of calculations due to the constructive complexity of the component structural elements. Therefore, expressing in a simplified but sufficiently precise form the various cinematic and dynamic parameters that characterize the proper functioning of the pumping units is extremely useful in analyzing the possibilities of their functional optimization. In the paper are presented a series of results concerning the expressing of some cinematic and dynamic parameters using polynomial functions in the case of the mechanism of a C-640D-305-120 pumping unit. The simulations have been performed with a computer program developed by the author using Maple programming environment. Experimental records processing was performed with the program Total Well Management.

Sign in / Sign up

Export Citation Format

Share Document