scholarly journals Atmospheric greenhouse gases retrieved from SCIAMACHY: comparison to ground-based FTS measurements and model results

2012 ◽  
Vol 12 (3) ◽  
pp. 1527-1540 ◽  
Author(s):  
O. Schneising ◽  
P. Bergamaschi ◽  
H. Bovensmann ◽  
M. Buchwitz ◽  
J. P. Burrows ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Standard Deviation ◽  
Greenhouse Gases ◽  
Seasonal Cycle ◽  
Relative Accuracy ◽  
Total Carbon ◽  
Inverse Modelling ◽  
Data Sets ◽  
Relative Precision ◽  
Data Set

Abstract. SCIAMACHY onboard ENVISAT (launched in 2002) enables the retrieval of global long-term column-averaged dry air mole fractions of the two most important anthropogenic greenhouse gases carbon dioxide and methane (denoted XCO2 and XCH4). In order to assess the quality of the greenhouse gas data obtained with the recently introduced v2 of the scientific retrieval algorithm WFM-DOAS, we present validations with ground-based Fourier Transform Spectrometer (FTS) measurements and comparisons with model results at eight Total Carbon Column Observing Network (TCCON) sites providing realistic error estimates of the satellite data. Such validation is a prerequisite to assess the suitability of data sets for their use in inverse modelling. It is shown that there are generally no significant differences between the carbon dioxide annual increases of SCIAMACHY and the assimilation system CarbonTracker (2.00 ± 0.16 ppm yr−1 compared to 1.94 ± 0.03 ppm yr−1 on global average). The XCO2 seasonal cycle amplitudes derived from SCIAMACHY are typically larger than those from TCCON which are in turn larger than those from CarbonTracker. The absolute values of the northern hemispheric TCCON seasonal cycle amplitudes are closer to SCIAMACHY than to CarbonTracker and the corresponding differences are not significant when compared with SCIAMACHY, whereas they can be significant for a subset of the analysed TCCON sites when compared with CarbonTracker. At Darwin we find discrepancies of the seasonal cycle derived from SCIAMACHY compared to the other data sets which can probably be ascribed to occurrences of undetected thin clouds. Based on the comparison with the reference data, we conclude that the carbon dioxide data set can be characterised by a regional relative precision (mean standard deviation of the differences) of about 2.2 ppm and a relative accuracy (standard deviation of the mean differences) of 1.1–1.2 ppm for monthly average composites within a radius of 500 km. For methane, prior to November 2005, the regional relative precision amounts to 12 ppb and the relative accuracy is about 3 ppb for monthly composite averages within the same radius. The loss of some spectral detector pixels results in a degradation of performance thereafter in the spectral range currently used for the methane column retrieval. This leads to larger scatter and lower XCH4 values are retrieved in the tropics for the subsequent time period degrading the relative accuracy. As a result, the overall relative precision is estimated to be 17 ppb and the relative accuracy is in the range of about 10–20 ppb for monthly averages within a radius of 500 km. The derived estimates show that the SCIAMACHY XCH4 data set before November 2005 is suitable for regional source/sink determination and regional-scale flux uncertainty reduction via inverse modelling worldwide. In addition, the XCO2 monthly data potentially provide valuable information in continental regions, where there is sparse sampling by surface flask measurements.

scholarly journals Atmospheric greenhouse gases retrieved from SCIAMACHY: comparison to ground-based FTS measurements and model results

2011 ◽  
Vol 11 (10) ◽  
pp. 28713-28745 ◽  
Author(s):  
O. Schneising ◽  
P. Bergamaschi ◽  
H. Bovensmann ◽  
M. Buchwitz ◽  
J. P. Burrows ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Greenhouse Gases ◽  
Seasonal Cycle ◽  
Relative Accuracy ◽  
Total Carbon ◽  
Inverse Modelling ◽  
Retrieval Algorithm ◽  
Data Sets ◽  
Relative Precision ◽  
Data Set

Abstract. SCIAMACHY onboard ENVISAT (launched in 2002) enables the retrieval of global long-term column-averaged dry air mole fractions of the two most important anthropogenic greenhouse gases carbon dioxide and methane (denoted XCO2 and XCH4). In order to assess the quality of the greenhouse gas data obtained with the recently introduced v2 of the scientific retrieval algorithm WFM-DOAS, we present validations with ground-based Fourier Transform Spectrometer (FTS) measurements and comparisons with model results at eight Total Carbon Column Observing Network (TCCON) sites providing realistic error estimates of the satellite data. Such validation is a prerequisite to assess the suitability of data sets for their use in inverse modelling. It is shown that there are generally no significant differences between the SCIAMACHY and CarbonTracker carbon dioxide annual increases (2.00 ± 0.16 ppm yr−1 compared to 1.94 ± 0.03 ppm yr−1 on global average). The XCO2 seasonal cycle amplitudes derived from SCIAMACHY are typically larger than those from TCCON which are in turn larger than those from CarbonTracker. The absolute values of the northern hemispheric TCCON seasonal cycle amplitudes are closer to SCIAMACHY than to CarbonTracker and the corresponding differences are not significant when compared with SCIAMACHY, whereas they can be significant when compared with CarbonTracker. At Darwin we find discrepancies of the seasonal cycle derived from SCIAMACHY compared to the other data sets which can probably be ascribed to occurrences of undetected thin clouds. Based on the comparison with the reference data, we conclude that the carbon dioxide data set can be characterised by a regional relative precision of about 2.2 ppm and a relative accuracy of 1.1–1.2 ppm for monthly average composites within a radius of 500 km. For methane, prior to November 2005, the regional relative precision amounts to 12 ppb and the relative accuracy is about 3 ppb with respect to model simulations for monthly composite averages within the same radius. The loss of some spectral detector pixels results in a degradation of performance thereafter in the spectral range currently used for the methane column retrieval. This leads to larger scatter and less methane retrieved in the tropics for the subsequent time period degrading the relative accuracy. As a result, the overall relative precision is estimated to be 17 ppb and the relative accuracy is in the range of about 10–20 ppb for monthly averages within a radius of 500 km. The derived estimates show that the SCIAMACHY XCH4 data set before November 2005 is suitable for regional source/sink determination via inverse modelling worldwide. In addition, the XCO2 monthly data potentially provide valuable information in continental regions, where there is sparse sampling by surface flask measurements.

scholarly journals Building the COllaborative Carbon Column Observing Network (COCCON): long-term stability and ensemble performance of the EM27/SUN Fourier transform spectrometer

2019 ◽  
Vol 12 (3) ◽  
pp. 1513-1530 ◽  
Author(s):  
Matthias Frey ◽  
Mahesh K. Sha ◽  
Frank Hase ◽  
Matthäus Kiel ◽  
Thomas Blumenstock ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Total Carbon ◽  
Data Sets ◽  
Term Study ◽  
Data Set ◽  
Term Stability ◽  
Long Term Stability ◽  
Long Term Study ◽  
Empirical Calibration

Abstract. In a 3.5-year long study, the long-term performance of a mobile, solar absorption Bruker EM27/SUN spectrometer, used for greenhouse gas observations, is checked with respect to a co-located reference Bruker IFS 125HR spectrometer, which is part of the Total Carbon Column Observing Network (TCCON). We find that the EM27/SUN is stable on timescales of several years; the drift per year between the EM27/SUN and the official TCCON product is 0.02 ppmv for XCO2 and 0.9 ppbv for XCH4, which is within the 1σ precision of the comparison, 0.6 ppmv for XCO2 and 4.3 ppbv for XCH4. The bias between the two data sets is 3.9 ppmv for XCO2 and 13.0 ppbv for XCH4. In order to avoid sensitivity-dependent artifacts, the EM27/SUN is also compared to a truncated IFS 125HR data set derived from full-resolution TCCON interferograms. The drift is 0.02 ppmv for XCO2 and 0.2 ppbv for XCH4 per year, with 1σ precisions of 0.4 ppmv for XCO2 and 1.4 ppbv for XCH4, respectively. The bias between the two data sets is 0.6 ppmv for XCO2 and 0.5 ppbv for XCH4. With the presented long-term stability, the EM27/SUN qualifies as an useful supplement to the existing TCCON network in remote areas. To achieve consistent performance, such an extension requires careful testing of any spectrometers involved by application of common quality assurance measures. One major aim of the COllaborative Carbon Column Observing Network (COCCON) infrastructure is to provide these services to all EM27/SUN operators. In the framework of COCCON development, the performance of an ensemble of 30 EM27/SUN spectrometers was tested and found to be very uniform, enhanced by the centralized inspection performed at the Karlsruhe Institute of Technology prior to deployment. Taking into account measured instrumental line shape parameters for each spectrometer, the resulting average bias across the ensemble with respect to the reference EM27/SUN used in the long-term study in XCO2 is 0.20 ppmv, while it is 0.8 ppbv for XCH4. The average standard deviation of the ensemble is 0.13 ppmv for XCO2 and 0.6 ppbv for XCH4. In addition to the robust metric based on absolute differences, we calculate the standard deviation among the empirical calibration factors. The resulting 2σ uncertainty is 0.6 ppmv for XCO2 and 2.2 ppbv for XCH4. As indicated by the executed long-term study on one device presented here, the remaining empirical calibration factor deduced for each individual instrument can be assumed constant over time. Therefore the application of these empirical factors is expected to further improve the EM27/SUN network conformity beyond the scatter among the empirical calibration factors reported above.

scholarly journals Consistent satellite XCO<sub>2</sub> retrievals from SCIAMACHY and GOSAT using the BESD algorithm

2015 ◽  
Vol 8 (2) ◽  
pp. 1787-1832 ◽  
Author(s):  
J. Heymann ◽  
M. Reuter ◽  
M. Hilker ◽  
M. Buchwitz ◽  
O. Schneising ◽  
...  
Keyword(s):  
Carbon Cycle ◽  
Detailed Comparison ◽  
Mean Difference ◽  
Total Carbon ◽  
Retrieval Algorithm ◽  
Data Sets ◽  
Data Set ◽  
Time Period ◽  
Comparison Results ◽  
The Future

Abstract. Consistent and accurate long-term data sets of global atmospheric concentrations of carbon dioxide (CO2) are required for carbon cycle and climate related research. However, global data sets based on satellite observations may suffer from inconsistencies originating from the use of products derived from different satellites as needed to cover a long enough time period. One reason for inconsistencies can be the use of different retrieval algorithms. We address this potential issue by applying the same algorithm, the Bremen Optimal Estimation DOAS (BESD) algorithm, to different satellite instruments, SCIAMACHY onboard ENVISAT (March 2002–April 2012) and TANSO-FTS onboard GOSAT (launched in January 2009), to retrieve XCO2, the column-averaged dry-air mole fraction of CO2. BESD has been initially developed for SCIAMACHY XCO2 retrievals. Here, we present the first detailed assessment of the new GOSAT BESD XCO2 product. GOSAT BESD XCO2 is a product generated and delivered to the MACC project for assimilation into ECMWF's Integrated Forecasting System (IFS). We describe the modifications of the BESD algorithm needed in order to retrieve XCO2 from GOSAT and present detailed comparisons with ground-based observations of XCO2 from the Total Carbon Column Observing Network (TCCON). We discuss detailed comparison results between all three XCO2 data sets (SCIAMACHY, GOSAT and TCCON). The comparison results demonstrate the good consistency between the SCIAMACHY and the GOSAT XCO2. For example, we found a mean difference for daily averages of −0.60 ± 1.56 ppm (mean difference ± standard deviation) for GOSAT-SCIAMACHY (linear correlation coefficient r = 0.82), −0.34 ± 1.37 ppm (r = 0.86) for GOSAT-TCCON and 0.10 ± 1.79 ppm (r = 0.75) for SCIAMACHY-TCCON. The remaining differences between GOSAT and SCIAMACHY are likely due to non-perfect collocation (±2 h, 10° × 10° around TCCON sites), i.e., the observed air masses are not exactly identical, but likely also due to a still non-perfect BESD retrieval algorithm, which will be continuously improved in the future. Our overarching goal is to generate a satellite-derived XCO2 data set appropriate for climate and carbon cycle research covering the longest possible time period. We therefore also plan to extend the existing SCIAMACHY and GOSAT data set discussed here by using also data from other missions (e.g., OCO-2, GOSAT-2, CarbonSat) in the future.

scholarly journals Validation of SCIAMACHY HDO/H<sub>2</sub>O measurements using the TCCON and NDACC-MUSICA networks

2015 ◽  
Vol 8 (4) ◽  
pp. 1799-1818 ◽  
Author(s):  
R. A. Scheepmaker ◽  
C. Frankenberg ◽  
N. M. Deutscher ◽  
M. Schneider ◽  
S. Barthlott ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Hydrological Cycle ◽  
Source Region ◽  
Total Carbon ◽  
Atmospheric Composition ◽  
The Tibetan Plateau ◽  
Wet Season ◽  
Data Set ◽  
The Mean ◽  
The Impact

Abstract. Measurements of the atmospheric HDO/H2O ratio help us to better understand the hydrological cycle and improve models to correctly simulate tropospheric humidity and therefore climate change. We present an updated version of the column-averaged HDO/H2O ratio data set from the SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY). The data set is extended with 2 additional years, now covering 2003–2007, and is validated against co-located ground-based total column δD measurements from Fourier transform spectrometers (FTS) of the Total Carbon Column Observing Network (TCCON) and the Network for the Detection of Atmospheric Composition Change (NDACC, produced within the framework of the MUSICA project). Even though the time overlap among the available data is not yet ideal, we determined a mean negative bias in SCIAMACHY δD of −35 ± 30‰ compared to TCCON and −69 ± 15‰ compared to MUSICA (the uncertainty indicating the station-to-station standard deviation). The bias shows a latitudinal dependency, being largest (∼ −60 to −80‰) at the highest latitudes and smallest (∼ −20 to −30‰) at the lowest latitudes. We have tested the impact of an offset correction to the SCIAMACHY HDO and H2O columns. This correction leads to a humidity- and latitude-dependent shift in δD and an improvement of the bias by 27‰, although it does not lead to an improved correlation with the FTS measurements nor to a strong reduction of the latitudinal dependency of the bias. The correction might be an improvement for dry, high-altitude areas, such as the Tibetan Plateau and the Andes region. For these areas, however, validation is currently impossible due to a lack of ground stations. The mean standard deviation of single-sounding SCIAMACHY–FTS differences is ∼ 115‰, which is reduced by a factor ∼ 2 when we consider monthly means. When we relax the strict matching of individual measurements and focus on the mean seasonalities using all available FTS data, we find that the correlation coefficients between SCIAMACHY and the FTS networks improve from 0.2 to 0.7–0.8. Certain ground stations show a clear asymmetry in δD during the transition from the dry to the wet season and back, which is also detected by SCIAMACHY. This asymmetry points to a transition in the source region temperature or location of the water vapour and shows the added information that HDO/H2O measurements provide when used in combination with variations in humidity.

scholarly journals Atmospheric column-averaged mole fractions of carbon dioxide at 53 aircraft measurement sites

2013 ◽  
Vol 13 (10) ◽  
pp. 5265-5275 ◽  
Author(s):  
Y. Miyamoto ◽  
M. Inoue ◽  
I. Morino ◽  
O. Uchino ◽  
T. Yokota ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Greenhouse Gases ◽  
Transport Model ◽  
Data Set ◽  
Density Profiles ◽  
Aircraft Measurement ◽  
Climatological Data ◽  
Atmospheric Column ◽  
Latitudinal Dependence ◽  
The Tropics

Abstract. Atmospheric column-averaged mole fractions of carbon dioxide (XCO2) at 53 locations around the world were derived from aircraft measurements covering the altitude range of about 1–10 km. We used CO2 vertical profile measurements from three major carbon cycle programs, a global climatological data set of air number density profiles and tropopause height for calculating XCO2 for the period of 2007–2009. Vertical profiles of the CO2 mixing ratio are complemented by tall tower data up to 400 m from the earth's surface and by simulated profiles in the stratosphere from a chemistry-transport model. The amplitude of the seasonal cycle of calculated XCO2 values shows clear latitudinal dependence, and the amplitude decreases from about 10 ppm at high latitudes in the Northern Hemisphere to at most 2 ppm in the tropics and the Southern Hemisphere. The uncertainties of XCO2 were estimated from assumptions about CO2 profiles for each flight. Typically, uncertainties were less than 1 ppm; thus, this data set is within the level of uncertainty needed for primary validation of XCO2 measurements by the Greenhouse gases Observing SATellite (GOSAT) and by future satellite missions for monitoring greenhouse gases.

scholarly journals A multi-decade record of high-quality fCO<sub>2</sub> data in version 3 of the Surface Ocean CO<sub>2</sub> Atlas (SOCAT)

2016 ◽  
Author(s):  
Dorothee C. E. Bakker ◽  
Benjamin Pfeil ◽  
Camilla S. Landa ◽  
Nicolas Metzl ◽  
Kevin M. O'Brien ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Surface Water ◽  
Data Collection ◽  
Data Availability ◽  
Data Sets ◽  
Science Data ◽  
High Quality ◽  
Data Set ◽  
Surface Ocean ◽  
Biogeochemical Models

Abstract. The Surface Ocean CO2 Atlas (SOCAT) is a synthesis of quality-controlled fCO2 (fugacity of carbon dioxide) values for the global surface oceans and coastal seas with regular updates. Version 3 of SOCAT has 14.5 million fCO2 values from 3646 data sets covering the years 1957 to 2014. This latest version has an additional 4.4 million fCO2 values relative to version 2 and extends the record from 2011 to 2014. Version 3 also significantly increases the data availability for 2005 to 2013. SOCAT has an average of approximately 1.2 million surface water fCO2 values per year for the years 2006 to 2012. Quality and documentation of the data has improved. A new feature is the data set quality control (QC) flag of E for data from alternative sensors and platforms. The accuracy of surface water fCO2 has been defined for all data set QC flags. Automated range checking has been carried out for all data sets during their upload into SOCAT. The upgrade of the interactive Data Set Viewer (previously known as the Cruise Data Viewer) allows better interrogation of the SOCAT data collection and rapid creation of high-quality figures for scientific presentations. Automated data upload has been launched for version 4 and will enable more frequent SOCAT releases in the future. High-profile scientific applications of SOCAT include quantification of the ocean sink for atmospheric carbon dioxide and its long-term variation, detection of ocean acidification, as well as evaluation of coupled-climate and ocean-only biogeochemical models. Users of SOCAT data products are urged to acknowledge the contribution of data providers, as stated in the SOCAT Fair Data Use Statement. This ESSD (Earth System Science Data) "Living Data" publication documents the methods and data sets used for the assembly of this new version of the SOCAT data collection and compares these with those used for earlier versions of the data collection (Pfeil et al., 2013; Sabine et al., 2013; Bakker et al., 2014).

scholarly journals Consistent satellite XCO<sub>2</sub> retrievals from SCIAMACHY and GOSAT using the BESD algorithm

2015 ◽  
Vol 8 (7) ◽  
pp. 2961-2980 ◽  
Author(s):  
J. Heymann ◽  
M. Reuter ◽  
M. Hilker ◽  
M. Buchwitz ◽  
O. Schneising ◽  
...  
Keyword(s):  
Carbon Cycle ◽  
Detailed Comparison ◽  
Mean Difference ◽  
Total Carbon ◽  
Retrieval Algorithm ◽  
Data Sets ◽  
Data Set ◽  
Time Period ◽  
Comparison Results ◽  
The Future

Abstract. Consistent and accurate long-term data sets of global atmospheric concentrations of carbon dioxide (CO2) are required for carbon cycle and climate-related research. However, global data sets based on satellite observations may suffer from inconsistencies originating from the use of products derived from different satellites as needed to cover a long enough time period. One reason for inconsistencies can be the use of different retrieval algorithms. We address this potential issue by applying the same algorithm, the Bremen Optimal Estimation DOAS (BESD) algorithm, to different satellite instruments, SCIAMACHY on-board ENVISAT (March 2002–April 2012) and TANSO-FTS on-board GOSAT (launched in January 2009), to retrieve XCO2, the column-averaged dry-air mole fraction of CO2. BESD has been initially developed for SCIAMACHY XCO2 retrievals. Here, we present the first detailed assessment of the new GOSAT BESD XCO2 product. GOSAT BESD XCO2 is a product generated and delivered to the MACC project for assimilation into ECMWF's Integrated Forecasting System. We describe the modifications of the BESD algorithm needed in order to retrieve XCO2 from GOSAT and present detailed comparisons with ground-based observations of XCO2 from the Total Carbon Column Observing Network (TCCON). We discuss detailed comparison results between all three XCO2 data sets (SCIAMACHY, GOSAT and TCCON). The comparison results demonstrate the good consistency between SCIAMACHY and GOSAT XCO2. For example, we found a mean difference for daily averages of −0.60 ± 1.56 ppm (mean difference ± standard deviation) for GOSAT–SCIAMACHY (linear correlation coefficient r=0.82), −0.34 ± 1.37 ppm (r = 0.86) for GOSAT–TCCON and 0.10 ± 1.79 ppm (r = 0.75) for SCIAMACHY–TCCON. The remaining differences between GOSAT and SCIAMACHY are likely due to non-perfect collocation (± 2 h, 10° x 10° around TCCON sites), i.e. the observed air masses are not exactly identical but likely also due to a still non-perfect BESD retrieval algorithm, which will be continuously improved in the future. Our overarching goal is to generate a satellite-derived XCO2 data set appropriate for climate and carbon cycle research covering the longest possible time period. We therefore also plan to extend the existing SCIAMACHY and GOSAT data set discussed here by also using data from other missions (e.g. OCO-2, GOSAT-2, CarbonSat) in the future.

scholarly journals Consistent evaluation of ACOS-GOSAT, BESD-SCIAMACHY, CarbonTracker, and MACC through comparisons to TCCON

2016 ◽  
Vol 9 (2) ◽  
pp. 683-709 ◽  
Author(s):  
Susan Kulawik ◽  
Debra Wunch ◽  
Christopher O'Dell ◽  
Christian Frankenberg ◽  
Maximilian Reuter ◽  
...  
Keyword(s):  
Mole Fraction ◽  
Seasonal Cycle ◽  
Atmospheric Co2 ◽  
Total Carbon ◽  
Atmospheric Composition ◽  
Cycle Phase ◽  
Data Set ◽  
Single Observation ◽  
Cycle Amplitude ◽  
The Impact

Abstract. Consistent validation of satellite CO2 estimates is a prerequisite for using multiple satellite CO2 measurements for joint flux inversion, and for establishing an accurate long-term atmospheric CO2 data record. Harmonizing satellite CO2 measurements is particularly important since the differences in instruments, observing geometries, sampling strategies, etc. imbue different measurement characteristics in the various satellite CO2 data products. We focus on validating model and satellite observation attributes that impact flux estimates and CO2 assimilation, including accurate error estimates, correlated and random errors, overall biases, biases by season and latitude, the impact of coincidence criteria, validation of seasonal cycle phase and amplitude, yearly growth, and daily variability. We evaluate dry-air mole fraction (XCO2) for Greenhouse gases Observing SATellite (GOSAT) (Atmospheric CO2 Observations from Space, ACOS b3.5) and SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY) (Bremen Optimal Estimation DOAS, BESD v2.00.08) as well as the CarbonTracker (CT2013b) simulated CO2 mole fraction fields and the Monitoring Atmospheric Composition and Climate (MACC) CO2 inversion system (v13.1) and compare these to Total Carbon Column Observing Network (TCCON) observations (GGG2012/2014). We find standard deviations of 0.9, 0.9, 1.7, and 2.1 ppm vs. TCCON for CT2013b, MACC, GOSAT, and SCIAMACHY, respectively, with the single observation errors 1.9 and 0.9 times the predicted errors for GOSAT and SCIAMACHY, respectively. We quantify how satellite error drops with data averaging by interpreting according to error2 = a2 + b2/n (with n being the number of observations averaged, a the systematic (correlated) errors, and b the random (uncorrelated) errors). a and b are estimated by satellites, coincidence criteria, and hemisphere. Biases at individual stations have year-to-year variability of  ∼  0.3 ppm, with biases larger than the TCCON-predicted bias uncertainty of 0.4 ppm at many stations. We find that GOSAT and CT2013b underpredict the seasonal cycle amplitude in the Northern Hemisphere (NH) between 46 and 53° N, MACC overpredicts between 26 and 37° N, and CT2013b underpredicts the seasonal cycle amplitude in the Southern Hemisphere (SH). The seasonal cycle phase indicates whether a data set or model lags another data set in time. We find that the GOSAT measurements improve the seasonal cycle phase substantially over the prior while SCIAMACHY measurements improve the phase significantly for just two of seven sites. The models reproduce the measured seasonal cycle phase well except for at Lauder_125HR (CT2013b) and Darwin (MACC). We compare the variability within 1 day between TCCON and models in JJA; there is correlation between 0.2 and 0.8 in the NH, with models showing 10–50 % the variability of TCCON at different stations and CT2013b showing more variability than MACC. This paper highlights findings that provide inputs to estimate flux errors in model assimilations, and places where models and satellites need further investigation, e.g., the SH for models and 45–67° N for GOSAT and CT2013b.

scholarly journals Three years of greenhouse gas column-averaged dry air mole fractions retrieved from satellite – Part 1: Carbon dioxide

2008 ◽  
Vol 8 (2) ◽  
pp. 5477-5536 ◽  
Author(s):  
O. Schneising ◽  
M. Buchwitz ◽  
J. P. Burrows ◽  
H. Bovensmann ◽  
M. Reuter ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Greenhouse Gas ◽  
Co2 Emissions ◽  
Northern Hemisphere ◽  
Seasonal Cycle ◽  
Reference Data ◽  
Data Set ◽  
Annual Increase ◽  
Dry Air ◽  
Good Agreement

Abstract. Carbon dioxide (CO2) and methane (CH4) are the two most important anthropogenic greenhouse gases. SCIAMACHY on ENVISAT is the first satellite instrument whose measurements are sensitive to concentration changes of the two gases at all altitude levels down to the Earth's surface where the source/sink signals are largest. We have processed three years (2003–2005) of SCIAMACHY near-infrared nadir measurements to simultaneously retrieve vertical columns of CO2 (from the 1.58 μm absorption band), CH4 (1.66 μm) and oxygen (O2 A-band at 0.76 μm) using the scientific retrieval algorithm WFM-DOAS. We show that the latest version of WFM-DOAS, version 1.0, which is used for this study, has been significantly improved with respect to its accuracy compared to the previous versions while essentially maintaining its high processing speed (~1 minute per orbit, corresponding to ~6000 single measurements, and per gas on a standard PC). The greenhouse gas columns are converted to dry air column-averaged mole fractions, denoted XCO2 (in ppm) and XCH4 (in ppb), by dividing the greenhouse gas columns by simultaneously retrieved dry air columns. For XCO2 dry air columns are obtained from the retrieved O2 columns. For XCH4 dry air columns are obtained from the retrieved CO2 columns because of better cancellation of light path related errors compared to using O2 columns retrieved from the spectrally distant O2 A-band. Here we focus on a discussion of the XCO2 data set. The XCH4 data set is discussed in a separate paper (Part 2). In order to assess the quality of the retrieved XCO2 we present comparisons with Fourier Transform Spectroscopy (FTS) XCO2 measurements at two northern hemispheric mid-latitude ground stations. To assess the quality globally, we present detailed comparisons with global XCO2 fields obtained from NOAA's CO2 assimilation system CarbonTracker. For the Northern Hemisphere we find good agreement with the reference data for the CO2 seasonal cycle and the CO2 annual increase. For the Southern Hemisphere, where significantly less data are available for averaging compared to the Northern Hemisphere, the CO2 annual increase is also in good agreement with CarbonTracker but the amplitude and phase of the seasonal cycle show systematic differences up to a few ppm arising partially from the O2 normalization. The retrieved XCO2 regional pattern at monthly resolution over various regions show clear corrrelations with CarbonTracker but also significant differences. Typically the retrieved variability is about 4 ppm (1% of 380 ppm) higher but depending on time and location differences can reach or even exceed 8 ppm. Based on the error analysis and on the comparison with the reference data we conclude that the XCO2 data set can be characterized by a single measurement retrieval precision (random error) of 1–2%, a systematic low bias of about 1.5%, and by a relative accuracy of about 1–2% for monthly averages at a spatial resolution of about 7°×7°. When averaging the SCIAMACHY XCO2 over all three years we find reasonable correlation with EDGAR anthropogenic CO2 emissions for Germany, The Netherlands and Belgium indicating that regionally elevated CO2 arising from regional anthropogenic CO2 emissions can be detected from space.

A Method for Determining Total Carbon Dioxide in Nanolitre Volumes of Liquid

1974 ◽  
Vol 61 (3) ◽  
pp. 667-675
Author(s):  
COLIN LITTLE
Keyword(s):  
Carbon Dioxide ◽  
Standard Deviation ◽  
Total Carbon

1. A microdiffusion method is described by which total carbon dioxide can be determined in 2 nl samples of liquid. The standard deviation for 0-30 mM/l HCO3- is approximately 1 mM/l. 2. The volume of sample can be reduced to o·8 nl, but the S.D. then rises to 1·6 mM/l. With volumes of 0·4 nl, the S.D. is 2·7 mM/l. It is not possible, without modification, to use volumes smaller than about 0·4 nl. 3. In samples where the HCO3- concentration is low, accuracy can be increased by using larger volumes: 10 mM/l HCO3- can be determined in 6 nl samples with a standard deviation of 0·5 mM/l.

Sign in / Sign up

Export Citation Format

Share Document