scholarly journals Countergradient heat flux observations during the evening transition period

2014 ◽  
Vol 14 (17) ◽  
pp. 9077-9085 ◽  
Author(s):  
E. Blay-Carreras ◽  
E. R. Pardyjak ◽  
D. Pino ◽  
D. C. Alexander ◽  
F. Lohou ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Surface Layer ◽  
Transition Period ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Buoyancy Flux ◽  
Horizontal Shear ◽  
Evening Transition ◽  
Virtual Potential Temperature

Abstract. Gradient-based turbulence models generally assume that the buoyancy flux ceases to introduce heat into the surface layer of the atmospheric boundary layer in temporal consonance with the gradient of the local virtual potential temperature. Here, we hypothesize that during the evening transition a delay exists between the instant when the buoyancy flux goes to zero and the time when the local gradient of the virtual potential temperature indicates a sign change. This phenomenon is studied using a range of data collected over several intensive observational periods (IOPs) during the Boundary Layer Late Afternoon and Sunset Turbulence field campaign conducted in Lannemezan, France. The focus is mainly on the lower part of the surface layer using a tower instrumented with high-speed temperature and velocity sensors. The results from this work confirm and quantify a flux-gradient delay. Specifically, the observed values of the delay are ~ 30–80 min. The existence of the delay and its duration can be explained by considering the convective timescale and the competition of forces associated with the classical Rayleigh–Bénard problem. This combined theory predicts that the last eddy formed while the sensible heat flux changes sign during the evening transition should produce a delay. It appears that this last eddy is decelerated through the action of turbulent momentum and thermal diffusivities, and that the delay is related to the convective turnover timescale. Observations indicate that as horizontal shear becomes more important, the delay time apparently increases to values greater than the convective turnover timescale.

scholarly journals Countergradient heat flux observations during the evening transition period

2014 ◽  
Vol 14 (6) ◽  
pp. 7711-7737 ◽  
Author(s):  
E. Blay-Carreras ◽  
E. R. Pardyjak ◽  
D. Pino ◽  
D. C. Alexander ◽  
F. Lohou ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Surface Layer ◽  
Time Scale ◽  
Transition Period ◽  
Potential Temperature ◽  
Buoyancy Flux ◽  
Horizontal Shear ◽  
Evening Transition ◽  
Virtual Potential Temperature

Abstract. Gradient-based turbulence models generally assume that the buoyancy flux ceases to introduce heat into the surface layer of the atmospheric boundary layer in temporal consonance with the gradient of the local virtual potential temperature. Here, we hypothesize that during the evening transition a delay exists between the instant when the buoyancy flux goes to zero and the time when the local gradient of the virtual potential temperature indicates a sign change. This phenomenon is studied using a range of data collected over several Intensive Observational Periods (IOPs) during the Boundary Layer Late Afternoon and Sunset Turbulence field campaign conducted in Lannemezan, France. The focus is mainly on the lower part of the surface layer using a tower instrumented with high-speed temperature and velocity sensors. The results from this work confirm and quantify a flux-gradient delay. Specifically, the observed values of the delay are ~30–80 min. The existence of the delay and its duration can be explained by considering the convective time scale and the competition of forces associated with the classical Rayleigh–Bénard problem. This combined theory predicts that the last eddy formed while the sensible heat flux changes sign during the evening transition should produce a delay. It appears that this last eddy is decelerated through the action of turbulent momentum and thermal diffusivities, and that the delay is related to the convective turn – over time – scale. Observations indicate that as horizontal shear becomes more important, the delay time apparently increases to values greater than the convective turnover time-scale.

scholarly journals Planetary boundary layer evolution over the Amazon rain forest in episodes of deep moist convection at ATTO

2019 ◽  
Author(s):  
Maurício I. Oliveira ◽  
Otávio C. Acevedo ◽  
Matthias Sörgel ◽  
Ernani L. Nascimento ◽  
Antonio O. Manzi ◽  
...  
Keyword(s):  
Heat Flux ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Moist Convection ◽  
Early Afternoon ◽  
Virtual Potential Temperature ◽  
Gust Fronts ◽  
Deep Moist Convection ◽  
Tall Tower ◽  
Gust Front

Abstract. In this study, high-frequency, multi-level measurements performed from late October to mid-November of 2015 at a 80-m tall tower of the Amazon Tall Tower Observatory (ATTO) project in central Amazonas State, Brazil, were used to diagnose the evolution of thermodynamic and kinematic variables as well as scalar fluxes during the passage of outflows generated by deep moist convection (DMC). Outflow associated with DMC activity over or near the tall tower was identified through the analysis of storm echoes in base reflectivity data from S-band weather radar at Manaus, combined with the detection of gust fronts and cold pools utilizing tower data. Four outflow events were selected, three of which took place during the early evening transition or nighttime hours and one during the early afternoon. Results show that the magnitude of the drop in virtual potential temperature and changes in wind velocity during outflow passages vary according to the type, organization, and life cycle of the convective storm. Overall, the nocturnal events highlighted the passage of well-defined gust fronts with moderate decrease in virtual potential temperature and increase in wind speed. The early afternoon event lacked a sharp gust front and only a gradual drop in virtual potential temperature was observed, probably because of weak or undeveloped outflow. Sensible heat flux (H) experienced an increase at the time of gust front arrival, which was possibly due to sinking of colder air. This was followed by a prolonged period of negative H, associated with enhanced nocturnal negative H in the storms' wake. In turn, increased latent heat flux (LE) was observed following the gust front, owing to drier air coming from the outflow; however, malfunctioning of the moisture sensors during rain precluded a better assessment of this variable. Substantial enhancements of Turbulent Kinetic Energy (TKE) were observed during and after gust front passage, with values comparable to those measured in grass fire experiments, evidencing the highly turbulent character of convective outflows. The early afternoon event displayed slight decreases in the aforementioned quantities in the passage of the outflow. Finally, a conceptual model of the time evolution of H in nocturnal convective outflows observed at the tower site is presented.

scholarly journals Planetary boundary layer evolution over the Amazon rainforest in episodes of deep moist convection at the Amazon Tall Tower Observatory

2020 ◽  
Vol 20 (1) ◽  
pp. 15-27 ◽  
Author(s):  
Maurício I. Oliveira ◽  
Otávio C. Acevedo ◽  
Matthias Sörgel ◽  
Ernani L. Nascimento ◽  
Antonio O. Manzi ◽  
...  
Keyword(s):  
Heat Flux ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Moist Convection ◽  
Early Afternoon ◽  
Virtual Potential Temperature ◽  
Gust Fronts ◽  
Deep Moist Convection ◽  
Tall Tower ◽  
Gust Front

Abstract. In this study, high-frequency, multilevel measurements, performed from late October to mid-November of 2015 at a 80 m tall tower of the Amazon Tall Tower Observatory (ATTO) project in the central state of Amazonas, Brazil, were used to diagnose the evolution of thermodynamic and kinematic variables as well as scalar fluxes during the passage of outflows generated by deep moist convection (DMC). Outflow associated with DMC activity over or near the tall tower was identified through the analysis of storm echoes in base reflectivity data from an S-band weather radar at Manaus, combined with the detection of gust fronts and cold pools utilizing tower data. Four outflow events were selected, three of which took place during the early evening transition or nighttime hours and one during the early afternoon. Results show that the magnitude of the drop in virtual potential temperature and changes in wind velocity during outflow passages vary according to the type, organization, and life cycle of the convective storm. The nocturnal events had well-defined gust fronts with moderate decreases in virtual potential temperature and increases in wind speed. The early afternoon event lacked a sharp gust front and only a gradual drop in virtual potential temperature was observed, probably because of weak or undeveloped outflow. Sensible heat flux (H) increased at the time of the gust front arrival, which was possibly due to the sinking of colder air. This was followed by a prolonged period of negative H, associated with enhanced nocturnal negative H in the wake of the storms. In turn, increased latent heat flux (LE) was observed following the gust front, owing to drier air coming from the outflow; however, malfunctioning of the moisture sensors during rain precluded a better assessment of this variable. Substantial enhancements of turbulent kinetic energy (TKE) were observed during and after the gust front passage, with values comparable to those measured in grass fire experiments, evidencing the highly turbulent character of convective outflows. The early afternoon event displayed slight decreases in the aforementioned quantities in the passage of the outflow. Finally, a conceptual model of the time evolution of H in nocturnal convective outflows observed at the tower site is presented.

scholarly journals Potential and Limitations in Estimating Sensible-Heat-Flux Profiles from Consecutive Temperature Profiles Using Remotely-Piloted Aircraft Systems

2019 ◽  
Vol 174 (1) ◽  
pp. 145-177 ◽  
Author(s):  
Line Båserud ◽  
Joachim Reuder ◽  
Marius O. Jonassen ◽  
Timothy A. Bonin ◽  
Phillip B. Chilson ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Mesoscale Model ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Time Of Day ◽  
Sensible Heat ◽  
Tethered Balloon ◽  
Flux Divergence ◽  
Remotely Piloted Aircraft

Abstract Profiles of the sensible heat flux are key to understanding atmospheric-boundary-layer (ABL) structure and development. Based on temperature profiling by a remotely-piloted aircraft system (RPAS), the Small Unmanned Meteorological Observer (SUMO) platform, during the Boundary Layer Late Afternoon and Sunset Turbulence (BLLAST) field campaign, 108 heat-flux profiles are estimated using a simplified version of the prognostic equation for potential temperature $$\theta $$θ that relates the tendency in $$\theta $$θ to the flux divergence over the time span between two consecutive flights. We validate for the first time RPAS-based heat-flux profiles against a network of 12 ground-based eddy-covariance stations (2–60 m above ground), in addition to a comparison with fluxes from a manned aircraft and a tethered balloon, enabling the detailed investigation of the potential and limitations related to this technique for obtaining fluxes from RPAS platforms. We find that appropriate treatment of horizontal advection is crucial for obtaining realistic flux values, and present correction methods specific to the state of the ABL. Advection from a mesoscale model is also tested as another correction method. The SUMO heat-flux estimates with appropriate corrections compare well with the reference measurements, with differences in the performance depending on the time of day, since the evening period shows the best results (94$$\%$$% within the spread of ground stations), and the afternoon period shows the poorest results (63$$\%$$% within the spread). The diurnal cycle of the heat flux is captured by the SUMO platform for several days, with the flux values from the manned aircraft and tethered balloon coinciding well with those from the SUMO platform.

Boundary Layer Characteristics over Areas of Inhomogeneous Surface Fluxes

1995 ◽  
Vol 34 (2) ◽  
pp. 559-571 ◽  
Author(s):  
J. C. Doran ◽  
W. J. Shaw ◽  
J. M. Hubbe
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Layer Structure ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Surface Fluxes ◽  
Heat Fluxes ◽  
Sensible Heat ◽  
Inhomogeneous Surface ◽  
A Site

Abstract This paper describes results from a June 1992 field program to study the response of the boundary layer over a site with well-defined extreme differences in sensible and latent heat fluxes over clearly separated areas, each with characteristic length scales of 10 km or more. The experiment region consisted of semiarid grassland steppe and irrigated farmland. Sensible heat flux maxima over the steppe regularly reached values in excess of 300 W m−2 and were typically a factor of 4 or more greater than those over the farmland. Two days were selected for analysis: one with moderate winds of 7–10 m s−1 and one with lighter winds of 4–7 m s−1 over the steppe. In both cases the wind directions were nearly perpendicular to the boundary between the steppe and farm. An analysis of potential temperature soundings showed that mixed-layer characteristics over both the farm and the steppe were largely determined by heating over the steppe, with advection from the steppe to the farm playing a significant role. On the day with the lighter winds, a secondary circulation related to the thermal contrasts between the two areas was observed. A simple conceptual model is described that predicts the extent of the cooler area required to generate such circulations. The observations illustrate how predictions of boundary layer structure in terms of local surface sensible heat fluxes may be compromised by advective effects. Such difficulties complicate efforts to obtain accurate representations of surface fluxes over inhomogeneous surfaces even if parameterizations of mesoscale contributions to the heat flux are included.

scholarly journals Lidar Measurement of Boundary Layer Evolution to Determine Sensible Heat Fluxes

2005 ◽  
Vol 6 (6) ◽  
pp. 840-853 ◽  
Author(s):  
W. E. Eichinger ◽  
H. E. Holder ◽  
R. Knight ◽  
J. Nichols ◽  
D. I. Cooper ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Heat Fluxes ◽  
Eddy Correlation ◽  
High Time Resolution ◽  
Lidar Measurement ◽  
Sensible Heat ◽  
Creek Watershed

Abstract The Soil Moisture–Atmosphere Coupling Experiment (SMACEX) was conducted in the Walnut Creek watershed near Ames, Iowa, over the period from 15 June to 11 July 2002. A main focus of SMACEX is the investigation of the interactions between the atmospheric boundary layer, surface moisture, and canopy. A vertically staring elastic lidar was used to provide a high-time-resolution continuous record of the boundary layer height at the edge between a soybean and cornfield. The height and thickness of the entrainment zone are used to estimate the surface sensible heat flux using the Batchvarova–Gryning boundary layer model. Flux estimates made over 6 days are compared to conventional eddy correlation measurements. The calculated values of the sensible heat flux were found to be well correlated (R2 = 0.79, with a slope of 0.95) when compared to eddy correlation measurements in the area. The standard error of the flux estimates was 21.4 W m−2 (31% rms difference between this method and surface measurements), which is somewhat higher than a predicted uncertainty of 16%. The major sources of error were from the estimates of the vertical potential temperature gradient and an assumption that the entrainment parameter A was equal to the ratio of the entrainment flux and the surface heat flux.

scholarly journals GRADIENT-DIFFUSION CLOSURE AND THE EJECTION-SWEEP CYCLE IN CONVECTIVE BOUNDARY LAYERS

2016 ◽  
Vol 38 ◽  
pp. 552
Author(s):  
Khaled Ghannam ◽  
Tomer Duman ◽  
Gabriel Katul ◽  
Marcelo Chamecki
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Vertical Velocity ◽  
Potential Temperature ◽  
Sensible Heat Flux ◽  
Turbulent Heat Flux ◽  
Turbulent Heat ◽  
Third Order ◽  
Convective Boundary ◽  
Gradient Diffusion

The inadequacy of conventional gradient-diffusion closure in modeling turbulent heat flux within the convective atmospheric boundary-layer is often alleviated by accounting for nonlocal transport. Such nonlocal effects are a manifestation of the inherent asymmetry in vertical transport in the convective boundary layer, which is in turn associated with third-order moments (skewness and fluxes of fluxes). In this work, the role of these third-order moments in second-order turbulence closure of the sensible heat flux is examined with the goal of reconciling the models to various closure assumptions. Surface layer similarity theory and mixed-layer parametrizations are used here, complemented by LES results when needed. The turbulent heat flux with various closure assumptions of the flux transport term is solved, including both local and nonlocal approaches. We connect to ejection-sweep cycles in the flow field using the GramCharlier cumulant expansion of the joint probability distribution of vertical velocity and potential temperature. In this nonlocal closure, the transport asymmetry models that include the vertical velocity skewness as a correction term to H originate from ejection-sweep events. Vertical inhomogeneity results in a modified-skewness correction to the nonlocal contribution to the heat flux associated with the relative intensity of ejections and sweeps.

scholarly journals Observation of sensible and latent heat flux profiles with lidar

2020 ◽  
Vol 13 (6) ◽  
pp. 3221-3233 ◽  
Author(s):  
Andreas Behrendt ◽  
Volker Wulfmeyer ◽  
Christoph Senff ◽  
Shravan Kumar Muppa ◽  
Florian Späth ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Latent Heat ◽  
Latent Heat Flux ◽  
Sensible Heat Flux ◽  
Ground Level ◽  
Sensible Heat ◽  
Flux Divergence ◽  
Convective Boundary ◽  
The Mean

Abstract. We present the first measurement of the sensible heat flux (H) profile in the convective boundary layer (CBL) derived from the covariance of collocated vertical-pointing temperature rotational Raman lidar and Doppler wind lidar measurements. The uncertainties of the H measurements due to instrumental noise and limited sampling are also derived and discussed. Simultaneous measurements of the latent heat flux profile (L) and other turbulent variables were obtained with the combination of water-vapor differential absorption lidar (WVDIAL) and Doppler lidar. The case study uses a measurement example from the HOPE (HD(CP)2 Observational Prototype Experiment) campaign, which took place in western Germany in 2013 and presents a cloud-free well-developed quasi-stationary CBL. The mean boundary layer height zi was at 1230 m above ground level. The results show – as expected – positive values of H in the middle of the CBL. A maximum of (182±32) W m−2, with the second number for the noise uncertainty, is found at 0.5 zi. At about 0.7 zi, H changes sign to negative values above. The entrainment flux was (-62±27) W m−2. The mean sensible heat flux divergence in the observed part of the CBL above 0.3 zi was −0.28 W m−3, which corresponds to a warming of 0.83 K h−1. The L profile shows a slight positive mean flux divergence of 0.12 W m−3 and an entrainment flux of (214±36) W m−2. The combination of H and L profiles in combination with variance and other turbulent parameters is very valuable for the evaluation of large-eddy simulation (LES) results and the further improvement and validation of turbulence parameterization schemes.

scholarly journals Midwinter Arctic leads form and dissipate low clouds

2020 ◽  
Vol 11 (1) ◽  
Author(s):  
Xia Li ◽  
Steven K. Krueger ◽  
Courtenay Strong ◽  
Gerald G. Mace ◽  
Sally Benson
Keyword(s):  
Boundary Layer ◽  
Heat Flux ◽  
Sensible Heat Flux ◽  
Three Dimensional ◽  
The Arctic ◽  
Substantial Contribution ◽  
Boundary Layer Clouds ◽  
Low Clouds ◽  
Arctic Ice ◽  
High Lead

AbstractLeads are a key feature of the Arctic ice pack during the winter owing to their substantial contribution to the surface energy balance. According to the present understanding, enhanced heat and moisture fluxes from high lead concentrations tend to produce more boundary layer clouds. However, described here in our composite analyses of diverse surface- and satellite-based observations, we find that abundant boundary layer clouds are associated with low lead flux periods, while fewer boundary layer clouds are observed for high lead flux periods. Motivated by these counterintuitive results, we conducted three-dimensional cloud-resolving simulations to investigate the underlying physics. We find that newly frozen leads with large sensible heat flux but low latent heat flux tend to dissipate low clouds. This finding indicates that the observed high lead fractions likely consist of mostly newly frozen leads that reduce any pre-existing low-level cloudiness, which in turn decreases downwelling infrared flux and accelerates the freezing of sea ice.

Sign in / Sign up

Export Citation Format

Share Document