scholarly journals Vertical wind retrieved by airborne lidar and analysis of island induced gravity waves in combination with numerical models and in-situ particle measurements

2016 ◽  
Author(s):  
F. Chouza ◽  
O. Reitebuch ◽  
M. Jähn ◽  
S. Rahm ◽  
B. Weinzierl
Keyword(s):  
Gravity Waves ◽  
Numerical Models ◽  
Estimation Method ◽  
Particle Number Density ◽  
Airborne Lidar ◽  
Vertical Wind ◽  
Induced Gravity ◽  
First Case ◽  
Lee Waves

Abstract. This study presents the analysis of island induced gravity waves observed by an airborne Doppler wind lidar (DWL) during SALTRACE. First, the instrumental corrections required for the retrieval of high spatial resolution vertical wind measurements from an airborne DWL are presented and the measurement accuracy estimated by means of two different methods. The estimated systematic error is below -0.05 m s-1 for the selected case of study, while the random error lies between 0.1 m s-1 and 0.16 m s-1 depending on the estimation method. Then, the presented method is applied to two measurement flights during which the presence of island induced gravity waves was detected. The first case corresponds to a research flight conducted on 17 June 2013 in the Cape Verde islands region, while the second case corresponds to a measurement flight on 26 June 2013 in the Barbados region. The presence of trapped lee waves predicted by the calculated Scorer parameter profiles was confirmed by the lidar and in-situ observations. The DWL measurements are used in combination with in-situ wind and particle number density measurements, large eddy simulations (LES), and wavelet analysis to determine the main characteristics of the observed island induced trapped waves.

scholarly journals Vertical wind retrieved by airborne lidar and analysis of island induced gravity waves in combination with numerical models and in situ particle measurements

2016 ◽  
Vol 16 (7) ◽  
pp. 4675-4692 ◽  
Author(s):  
Fernando Chouza ◽  
Oliver Reitebuch ◽  
Michael Jähn ◽  
Stephan Rahm ◽  
Bernadett Weinzierl
Keyword(s):  
Gravity Waves ◽  
Numerical Models ◽  
Estimation Method ◽  
Particle Number Density ◽  
Airborne Lidar ◽  
Vertical Wind ◽  
Induced Gravity ◽  
First Case ◽  
Lee Waves

Abstract. This study presents the analysis of island induced gravity waves observed by an airborne Doppler wind lidar (DWL) during SALTRACE. First, the instrumental corrections required for the retrieval of high spatial resolution vertical wind measurements from an airborne DWL are presented and the measurement accuracy estimated by means of two different methods. The estimated systematic error is below −0.05 m s−1 for the selected case of study, while the random error lies between 0.1 and 0.16 m s−1 depending on the estimation method. Then, the presented method is applied to two measurement flights during which the presence of island induced gravity waves was detected. The first case corresponds to a research flight conducted on 17 June 2013 in the Cabo Verde islands region, while the second case corresponds to a measurement flight on 26 June 2013 in the Barbados region. The presence of trapped lee waves predicted by the calculated Scorer parameter profiles was confirmed by the lidar and in situ observations. The DWL measurements are used in combination with in situ wind and particle number density measurements, large-eddy simulations (LES), and wavelet analysis to determine the main characteristics of the observed island induced trapped waves.

Numerical modeling of mesospheric mountain wave propagation observed in Southern Argentina during the SOUTHTRAC campaign

2020 ◽  
Author(s):  
Tyler Mixa ◽  
Andreas Dörnbrack ◽  
Bernd Kaifler ◽  
Markus Rapp
Keyword(s):  
Remote Sensing ◽  
Large Scale ◽  
Numerical Models ◽  
Airborne Lidar ◽  
Tierra Del Fuego ◽  
Polar Night ◽  
Research Aircraft ◽  
Complex Propagation ◽  
The Antarctic

<p>We present numerical simulations of a deep orographic gravity wave (GW) event observed by the ALIMA airborne lidar on 11-12 September 2019 over Southern Argentina. The measurements are taken from the 2019 SOUTHTRAC Campaign, employing a comprehensive suite of remote sensing and in-situ instruments onboard the HALO research aircraft to study the stratospheric GW hotspot over Tierra del Fuego and the Antarctic Peninsula. Wind conditions on 11-12 September exhibit local and large-scale directional shear from the ground to the polar night jet, creating a complex propagation environment supporting multiple orientations of GW propagation and strong potential for local GW breaking and secondary GW generation. Using high resolution numerical models, we simulate the 3D evolution of the orographic GW field to analyze<span> the remote sensing and in-situ measurements from the event.</span></p>

Post-Hurricane Michael damage assessment using ADCIRC storm surge hindcast, image classification, and LiDAR

Shore & Beach ◽  
2019 ◽  
pp. 3-14 ◽  
Author(s):  
Joshua Davis ◽  
Diana Mitsova ◽  
Tynon Briggs ◽  
Tiffany Briggs
Keyword(s):  
Wave Energy ◽  
Field Studies ◽  
Feedback Mechanism ◽  
Water Velocity ◽  
Airborne Lidar ◽  
Storm Events ◽  
Magnetic Current ◽  
Coastal Mapping ◽  
Electro Magnetic

Wave forcing from hurricanes, nor’easters, and energetic storms can cause erosion of the berm and beach face resulting in increased vulnerability of dunes and coastal infrastructure. LIDAR or other surveying techniques have quantified post-event morphology, but there is a lack of in situ hydrodynamic and morphodynamic measurements during extreme storm events. Two field studies were conducted in March 2018 and April 2019 at Bethany Beach, Delaware, where in situ hydrodynamic and morphodynamic measurements were made during a nor’easter (Nor’easter Riley) and an energetic storm (Easter Eve Storm). An array of sensors to measure water velocity, water depth, water elevation and bed elevation were mounted to scaffold pipes and deployed in a single cross-shore transect. Water velocity was measured using an electro-magnetic current meter while water and bed elevations were measured using an acoustic distance meter along with an algorithm to differentiate between the water and bed during swash processes. GPS profiles of the beach face were measured during every day-time low tide throughout the storm events. Both accretion and erosion were measured at different cross-shore positions and at different times during the storm events. Morphodynamic change along the back-beach was found to be related to berm erosion, suggesting an important morphologic feedback mechanism. Accumulated wave energy and wave energy flux per unit area between Nor’easter Riley and a recent mid-Atlantic hurricane (Hurricane Dorian) were calculated and compared. Coastal Observations: JALBTCX/NCMP emergency-response airborne Lidar coastal mapping & quick response data products for 2016/2017/2018 hurricane impact assessments

Development and Applications of a Wellhead Protection Area Delineation Computer Program

1991 ◽  
Vol 24 (11) ◽  
pp. 51-62 ◽  
Author(s):  
N. Guiguer ◽  
T. Franz
Keyword(s):  
Case History ◽  
Numerical Models ◽  
Groundwater Resources ◽  
Theoretical Background ◽  
Human Interaction ◽  
Wellhead Protection ◽  
First Case ◽  
Protection Area ◽  
And Storage ◽  
The Town

In the last few years, groundwater management has concentrated on the protection of groundwater quality. An increasing number of countries has adopted policies to protect vital groundwater resources from deterioration by regulating human interaction with the subsurface, the use of potential contaminants, land use restrictions, and waste transport and storage. One of the more common regulatory approaches to the protection of groundwater focuses on public water supplies to reduce the potential of human exposure to hazardous contaminants. Under the framework of the Safe Drinking Water Act amended by U.S. Congress in 1986, The U.S.EPA (1987) issued guidelines for the delineation of wellhead protection areas, recommending the use of analytical and numerical models for the identification of such areas. In this study, the theoretical background for the development of one such numerical model is presented. Two real-world applications are discussed: in the first case history, the model is applied to a Superfund Site in Puerto Rico as a tool for assessment of the effectiveness of a proposed pump-and-treat scheme for aquifer remediation. Based on simulation results for the evolution of the existing contaminant plume it was verified that such a scheme would not work with the proposed purging wells. The second case history is the delineation of a wellhead protection area in the Town of Littleton, Massachusetts, and subsequent design of a monitoring well network.

Fluorescent in situ hybridization (FISH): A useful diagnostic tool for childhood conjunctival melanoma

2021 ◽  
pp. 112067212110307
Author(s):  
Raquel María Moral ◽  
Carlos Monteagudo ◽  
Javier Muriel ◽  
Lucía Moreno ◽  
Ana María Peiró
Keyword(s):  
In Situ Hybridization ◽  
Fluorescent In Situ Hybridization ◽  
Pediatric Population ◽  
Diagnostic Technique ◽  
Histopathological Diagnosis ◽  
Fish Analysis ◽  
Conjunctival Melanoma ◽  
Adequate Treatment ◽  
First Case

Introduction: Conjunctival melanoma is extremely rare in children and has low rates of resolution. Definitive histopathological diagnosis based exclusively on microscopic findings is sometimes difficult. Thus, early diagnosis and adequate treatment are essential to improve clinical outcomes. Clinical case: We present the first case in which the fluorescent in situ hybridization (FISH) diagnostic technique was applied to a 10-year-old boy initially suspected of having amelanotic nevi in his right eye. Based on the 65% of tumor cells with 11q13 (CCND1) copy number gain and 33% with 6p25 (RREB1) gain as measured by the FISH analysis, and on supporting histopathological findings, the diagnosis of conjunctival melanoma could be made. Following a larger re-excision, adjuvant therapy with Mitomycin C (MMC), cryotherapy and an amniotic membrane graft, the patient has remained disease-free during 9 years of long-term follow-up. Case discussion: Every ophthalmologist should remember to consider and not forget the possibility of using FISH analyses during the differential diagnosis of any suspicious conjunctival lesions. Genetic techniques, such as FISH, have led to great advances in the classification of ambiguous lesions. Evidence-based guidelines for diagnosing conjunctival melanoma in the pediatric population are needed to determine the most appropriate strategy for this age group.

scholarly journals Industrial Plume Properties Retrieved by Optimal Estimation Using Combined Hyperspectral and Sentinel-2 Data

2021 ◽  
Vol 13 (10) ◽  
pp. 1865
Author(s):  
Gabriel Calassou ◽  
Pierre-Yves Foucher ◽  
Jean-François Léon
Keyword(s):  
Matched Filter ◽  
Estimation Method ◽  
Optimal Estimation ◽  
Model Parameters ◽  
Surface Reflectance ◽  
Sequential Method ◽  
Modal Radius ◽  
Sentinel 2

Stack emissions from the industrial sector are a subject of concern for air quality. However, the characterization of the stack emission plume properties from in situ observations remains a challenging task. This paper focuses on the characterization of the aerosol properties of a steel plant stack plume through the use of hyperspectral (HS) airborne remote sensing imagery. We propose a new method, based on the combination of HS airborne acquisition and surface reflectance imagery derived from the Sentinel-2 Multi-Spectral Instrument (MSI). The proposed method detects the plume footprint and estimates the surface reflectance under the plume, the aerosol optical thickness (AOT), and the modal radius of the plume. Hyperspectral surface reflectances are estimated using the coupled non-negative matrix factorization (CNMF) method combining HS and MSI data. The CNMF reduces the error associated with estimating the surface reflectance below the plume, particularly for heterogeneous classes. The AOT and modal radius are retrieved using an optimal estimation method (OEM), based on the forward model and allowing for uncertainties in the observations and in the model parameters. The a priori state vector is provided by a sequential method using the root mean square error (RMSE) metric, which outperforms the previously used cluster tuned matched filter (CTMF). The OEM degrees of freedom are then analysed, in order to refine the mask plume and to enhance the quality of the retrieval. The retrieved mean radii of aerosol particles in the plume is 0.125 μμm, with an uncertainty of 0.05 μμm. These results are close to the ultra-fine mode (modal radius around 0.1 μμm) observed from in situ measurements within metallurgical plant plumes from previous studies. The retrieved AOT values vary between 0.07 (near the source point) and 0.01, with uncertainties of 0.005 for the darkest surfaces and above 0.010 for the brightest surfaces.

scholarly journals Sub-Level Stoping in an Underground Limestone Quarry: An Analysis of the State of Stress in an Evolutionary Scenario

2016 ◽  
Vol 61 (1) ◽  
pp. 199-216 ◽  
Author(s):  
Marilena Cardu ◽  
Sergio Dipietromaria ◽  
Pierpaolo Oreste
Keyword(s):  
Numerical Models ◽  
The State ◽  
In Situ Tests ◽  
Future Scenario ◽  
Limestone Quarry ◽  
Geomechanical Properties ◽  
State Of Stress ◽  
Upper Level ◽  
Pillar Structure

Abstract The aim of this study was to evaluate the state of stress of a „voids-pillar“ structure excavated by means of the sub-level stoping method in an underground limestone quarry near Bergamo (Italy). Both the current structure of the quarry (i.e. the rooms exploited till now) and a possible future scenario were analysed using the (FDM) FLAC 2D code. The quarry has been in operation since 1927; at present, exploitation is carried out underground via the sub-level stoping method. Exploitation involves two levels, with 5 rooms on the upper level and 9 rooms on the lower level. After analysing data obtained from laboratory and in situ tests carried out on rock samples and natural discontinuities, the geomechanical properties of the medium, knowledge of which is essential in order to establish the parameters that must be included in the numerical model, were evaluated. The implementation of three numerical models made it possible to study both the present conditions of quarry exploitation and the evolution of the exploited rooms, as well as a possible expansion involving a third level of rooms. Using the results obtained regarding the stress-strain present in the pillars, a potential change in room geometry was proposed aimed at reducing the stress state inside the pillars, decreasing plasticity and increasing overall quarry safety.

Analysis of TBM Tunnel Behavior in Jointed Rock Mass

2011 ◽  
Vol 90-93 ◽  
pp. 2033-2036 ◽  
Author(s):  
Jin Shan Sun ◽  
Hong Jun Guo ◽  
Wen Bo Lu ◽  
Qing Hui Jiang
Keyword(s):  
Rock Mass ◽  
Numerical Models ◽  
Jointed Rock ◽  
In Situ Stress ◽  
Jointed Rock Mass ◽  
Joint Orientation ◽  
Joint Spacing ◽  
Factors Affecting ◽  
Dip Angle

The factors affecting the TBM tunnel behavior in jointed rock mass is investigated. In the numerical models the concrete segment lining of TBM tunnel is concerned, which is simulated as a tube neglecting the segment joint. And the TBM tunnel construction process is simulate considering the excavation and installing of the segment linings. Some cases are analyzed with different joint orientation, joint spacing, joint strength and tunnel depth. The results show that the shape and areas of loosing zones of the tunnel are influenced by the parameters of joint sets and in-situ stress significantly, such as dip angle, spacing, strength, and the in-situ stress statement. And the stress and deformation of the tunnel lining are influenced by the parameters of joint sets and in-situ stress, too.

Sign in / Sign up

Export Citation Format

Share Document