Numerical modeling of mesospheric mountain wave propagation observed in Southern Argentina during the SOUTHTRAC campaign

Author(s):  
Tyler Mixa ◽  
Andreas Dörnbrack ◽  
Bernd Kaifler ◽  
Markus Rapp

<p>We present numerical simulations of a deep orographic gravity wave (GW) event observed by the ALIMA airborne lidar on 11-12 September 2019 over Southern Argentina. The measurements are taken from the 2019 SOUTHTRAC Campaign, employing a comprehensive suite of remote sensing and in-situ instruments onboard the HALO research aircraft to study the stratospheric GW hotspot over Tierra del Fuego and the Antarctic Peninsula. Wind conditions on 11-12 September exhibit local and large-scale directional shear from the ground to the polar night jet, creating a complex propagation environment supporting multiple orientations of GW propagation and strong potential for local GW breaking and secondary GW generation. Using high resolution numerical models, we simulate the 3D evolution of the orographic GW field to analyze<span> the remote sensing and in-situ measurements from the event.</span></p>

2018 ◽  
Vol 176 ◽  
pp. 10001
Author(s):  
Franco Marenco ◽  
Claire Ryder ◽  
Victor Estellés ◽  
Sara Segura ◽  
Vassilis Amiridis ◽  
...  

In August 2015, the AER-D campaign made use of the FAAM research aircraft based in Cape Verde, and targeted mineral dust. First results will be shown here. The campaign had multiple objectives: (1) lidar dust mapping for the validation of satellite and model products; (2) validation of sunphotometer remote sensing with airborne measurements; (3) coordinated measurements with the CATS lidar on the ISS; (4) radiative closure studies; and (5) the validation of a new model of dustsonde.


2000 ◽  
Vol 663 ◽  
Author(s):  
J. Samper ◽  
R. Juncosa ◽  
V. Navarro ◽  
J. Delgado ◽  
L. Montenegro ◽  
...  

ABSTRACTFEBEX (Full-scale Engineered Barrier EXperiment) is a demonstration and research project dealing with the bentonite engineered barrier designed for sealing and containment of waste in a high level radioactive waste repository (HLWR). It includes two main experiments: an situ full-scale test performed at Grimsel (GTS) and a mock-up test operating since February 1997 at CIEMAT facilities in Madrid (Spain) [1,2,3]. One of the objectives of FEBEX is the development and testing of conceptual and numerical models for the thermal, hydrodynamic, and geochemical (THG) processes expected to take place in engineered clay barriers. A significant improvement in coupled THG modeling of the clay barrier has been achieved both in terms of a better understanding of THG processes and more sophisticated THG computer codes. The ability of these models to reproduce the observed THG patterns in a wide range of THG conditions enhances the confidence in their prediction capabilities. Numerical THG models of heating and hydration experiments performed on small-scale lab cells provide excellent results for temperatures, water inflow and final water content in the cells [3]. Calculated concentrations at the end of the experiments reproduce most of the patterns of measured data. In general, the fit of concentrations of dissolved species is better than that of exchanged cations. These models were later used to simulate the evolution of the large-scale experiments (in situ and mock-up). Some thermo-hydrodynamic hypotheses and bentonite parameters were slightly revised during TH calibration of the mock-up test. The results of the reference model reproduce simultaneously the observed water inflows and bentonite temperatures and relative humidities. Although the model is highly sensitive to one-at-a-time variations in model parameters, the possibility of parameter combinations leading to similar fits cannot be precluded. The TH model of the “in situ” test is based on the same bentonite TH parameters and assumptions as for the “mock-up” test. Granite parameters were slightly modified during the calibration process in order to reproduce the observed thermal and hydrodynamic evolution. The reference model captures properly relative humidities and temperatures in the bentonite [3]. It also reproduces the observed spatial distribution of water pressures and temperatures in the granite. Once calibrated the TH aspects of the model, predictions of the THG evolution of both tests were performed. Data from the dismantling of the in situ test, which is planned for the summer of 2001, will provide a unique opportunity to test and validate current THG models of the EBS.


2008 ◽  
Vol 26 (11) ◽  
pp. 3411-3428 ◽  
Author(s):  
P. Daum ◽  
M. H. Denton ◽  
J. A. Wild ◽  
M. G. G. T. Taylor ◽  
J. Šafránková ◽  
...  

Abstract. Among the many challenges facing the space weather modelling community today, is the need for validation and verification methods of the numerical models available describing the complex nonlinear Sun-Earth system. Magnetohydrodynamic (MHD) models represent the latest numerical models of this environment and have the unique ability to span the enormous distances present in the magnetosphere, from several hundred kilometres to several thousand kilometres above the Earth's surface. This makes it especially difficult to develop verification and validation methods which posses the same range spans as the models. In this paper we present a first general large-scale comparison between four years (2001–2004) worth of in situ Cluster plasma observations and the corresponding simulated predictions from the coupled Block-Adaptive-Tree-Solarwind-Roe-Upwind-Scheme (BATS-R-US) MHD code. The comparison between the in situ measurements and the model predictions reveals that by systematically constraining the MHD model inflow boundary conditions a good correlation between the in situ observations and the modeled data can be found. These results have an implication for modelling studies addressing also smaller scale features of the magnetosphere. The global MHD simulation can therefore be used to place localised satellite and/or ground-based observations into a global context and fill the gaps left by measurements.


Cirrus ◽  
2002 ◽  
Author(s):  
Kenneth Sassen ◽  
Gerald Mace

Cirrus clouds have only recently been recognized as having a significant influence on weather and climate through their impact on the radiative energy budget of the atmosphere. In addition, the unique difficulties presented by the study of cirrus put them on the “back burner” of atmospheric research for much of the twentieth century. Foremost, because they inhabit the frigid upper troposphere, their inaccessibility has hampered intensive research. Other factors have included a lack of in situ instrumentation to effectively sample the clouds and environment, and basic uncertainties in the underlying physics of ice cloud formation, growth, and maintenance. Cloud systems that produced precipitation, severe weather, or hazards to aviation were deemed more worthy of research support until the mid- 1980s. Beginning at this time, however, major field research programs such as the First ISCCP (International Satellite Cloud Climatology Program) Regional Experiment (FIRE; Cox et al. 1987), International Cirrus Experiment (ICE; Raschke et al. 1990), Experimental Cloud Lidar Pilot Study (ECLIPS; Platt et al. 1994), and the Atmospheric Radiation Measurement (ARM) Program (Stokes and Schwartz 1994) have concentrated on cirrus cloud research, relying heavily on ground-based remote sensing observations combined with research aircraft. What has caused this change in research emphasis is an appreciation for the potentially significant role that cirrus play in maintaining the radiation balance of the earth-atmosphere system (Liou 1986). As climate change issues were treated more seriously, it was recognized that the effects, or feedbacks, of extensive high-level ice clouds in response to global warming could be pivotal. This fortunately came at a time when new generations of meteorological instrumentation were becoming available. Beginning in the early 1970s, major advancements were made in the fields of numerical cloud modeling and cloud measurements using aircraft probes, satellite multispectral imaging, and remote sensing with lidar, short-wavelength radar, and radiometers, all greatly facilitating cirrus research. Each of these experimental approaches have their advantages and drawbacks, and it should also be noted that a successful cloud modeling effort relies on field data for establishing boundary conditions and providing case studies for validation. Although the technologies created for in situ aircraft measurements can clearly provide unique knowledge of cirrus cloud thermodynamic and microphysical properties (Dowling and Radke 1990), available probes may suffer from limitations in their response to the wide range of cirrus particles and actually sample a rather small volume of cloud during any mission.


2016 ◽  
Author(s):  
F. Chouza ◽  
O. Reitebuch ◽  
M. Jähn ◽  
S. Rahm ◽  
B. Weinzierl

Abstract. This study presents the analysis of island induced gravity waves observed by an airborne Doppler wind lidar (DWL) during SALTRACE. First, the instrumental corrections required for the retrieval of high spatial resolution vertical wind measurements from an airborne DWL are presented and the measurement accuracy estimated by means of two different methods. The estimated systematic error is below -0.05 m s-1 for the selected case of study, while the random error lies between 0.1 m s-1 and 0.16 m s-1 depending on the estimation method. Then, the presented method is applied to two measurement flights during which the presence of island induced gravity waves was detected. The first case corresponds to a research flight conducted on 17 June 2013 in the Cape Verde islands region, while the second case corresponds to a measurement flight on 26 June 2013 in the Barbados region. The presence of trapped lee waves predicted by the calculated Scorer parameter profiles was confirmed by the lidar and in-situ observations. The DWL measurements are used in combination with in-situ wind and particle number density measurements, large eddy simulations (LES), and wavelet analysis to determine the main characteristics of the observed island induced trapped waves.


2020 ◽  
Vol 12 (17) ◽  
pp. 2774
Author(s):  
Marta Konik ◽  
Piotr Kowalczuk ◽  
Monika Zabłocka ◽  
Anna Makarewicz ◽  
Justyna Meler ◽  
...  

The Nordic Seas and the Fram Strait regions are a melting pot of a number of water masses characterized by distinct optical water properties. The warm Atlantic Waters transported from the south and the Arctic Waters from the north, combined with the melt waters contributing to the Polar Waters, mediate the dynamic changes of the year-to-year large-scale circulation patterns in the area, which often form complex frontal zones. In the last decade, moreover, a significant shift in phytoplankton phenology in the area has been observed, with a certain northward expansion of temperate phytoplankton communities into the Arctic Ocean which could lead to a deterioration in the performance of remote sensing algorithms. In this research, we exploited the capability of the satellite sensors to monitor those inter-annual changes at basin scales. We propose locally adjusted algorithms for retrieving chlorophyll a concentrations Chla, absorption by particles ap at 443 and 670 nm, and total absorption atot at 443 and 670 nm developed on the basis of intensive field work conducted in 2013–2015. Measured in situ hyper spectral remote sensing reflectance has been used to reconstruct the MODIS and OLCI spectral channels for which the proposed algorithms have been adapted. We obtained MNB ≤ 0.5% for ap(670) and ≤3% for atot(670) and Chla. RMS was ≤30% for most of the retrieved optical water properties except ap(443) and Chla. The mean monthly mosaics of ap(443) computed on the basis of the proposed algorithm were used for reconstructing the spatial and temporal changes of the phytoplankton biomass in 2013–2015. The results corresponded very well with in situ measurements.


2019 ◽  
Vol 13 (10) ◽  
pp. 2771-2787 ◽  
Author(s):  
Jan De Rydt ◽  
Gudmundur Hilmar Gudmundsson ◽  
Thomas Nagler ◽  
Jan Wuite

Abstract. Despite the potentially detrimental impact of large-scale calving events on the geometry and ice flow of the Antarctic Ice Sheet, little is known about the processes that drive rift formation prior to calving, or what controls the timing of these events. The Brunt Ice Shelf in East Antarctica presents a rare natural laboratory to study these processes, following the recent formation of two rifts, each now exceeding 50 km in length. Here we use 2 decades of in situ and remote sensing observations, together with numerical modelling, to reveal how slow changes in ice shelf geometry over time caused build-up of mechanical tension far upstream of the ice front, and culminated in rift formation and a significant speed-up of the ice shelf. These internal feedbacks, whereby ice shelves generate the very conditions that lead to their own (partial) disintegration, are currently missing from ice flow models, which severely limits their ability to accurately predict future sea level rise.


2019 ◽  
Vol 12 (3) ◽  
pp. 1635-1658 ◽  
Author(s):  
Kevin Wolf ◽  
André Ehrlich ◽  
Marek Jacob ◽  
Susanne Crewell ◽  
Martin Wirth ◽  
...  

Abstract. In situ measurements of cloud droplet number concentration N are limited by the sampled cloud volume. Satellite retrievals of N suffer from inherent uncertainties, spatial averaging, and retrieval problems arising from the commonly assumed strictly adiabatic vertical profiles of cloud properties. To improve retrievals of N it is suggested in this paper to use a synergetic combination of passive and active airborne remote sensing measurement, to reduce the uncertainty of N retrievals, and to bridge the gap between in situ cloud sampling and global averaging. For this purpose, spectral solar radiation measurements above shallow trade wind cumulus were combined with passive microwave and active radar and lidar observations carried out during the second Next Generation Remote Sensing for Validation Studies (NARVAL-II) campaign with the High Altitude and Long Range Research Aircraft (HALO) in August 2016. The common technique to retrieve N is refined by including combined measurements and retrievals of cloud optical thickness τ, liquid water path (LWP), cloud droplet effective radius reff, and cloud base and top altitude. Three approaches are tested and applied to synthetic measurements and two cloud scenarios observed during NARVAL-II. Using the new combined retrieval technique, errors in N due to the adiabatic assumption have been reduced significantly.


2020 ◽  
Author(s):  
Markus Rapp ◽  
Bernd Kaifler ◽  
Andreas Dörnbrack ◽  
Sonja Gisinger ◽  
Tyler Mixa ◽  
...  

<p>The region around Southern Argentina and the Antarctic peninsula is known as the world’s strongest hotspot of stratospheric gravity wave activity. In this region, large tropospheric winds are perturbed by the orography of the Andes and the Antarctic peninsula resulting in the excitation of mountain waves which might propagate all the way up into the upper mesosphere when the polar night jet is intact. In addition, satellite observations also show large stratospheric wave activity in the region of the Drake passage, i.e., in between the Andes and the Antarctic peninsula, and along the corresponding latitudinal circle of 60°S. The origin of these waves is currently not entirely understood. Several hypotheses are currently being investigated, like for example the idea that the mountain waves that were originally excited over the Andes and the Antarctic peninsula propagate horizontally to 60°S and along the latitudinal circle. In order to investigate this and other hypotheses the German research aircraft HALO was deployed to Rio Grande, Tierra del Fuego, at the Southern Tip of Argentina in September and November 2019 in the frame of the SOUTHTRAC (Southern hemisphere Transport, Dynamics, and Chemistry) research mission. A total of 6 dedicated research flights with a typical length of 7000km were conducted to obtain gravity wave observations with the newly developed ALIMA (ALIMA=Airborne LIdar for Middle Atmosphere research)-instrument and the GLORIA (GLORIA=Gimballed Limb Observer for Radiance Imaging of the Atmosphere) limb sounder. While ALIMA measures temperatures and temperature perturbations in the altitude range from 20-90 km, GLORIA observations allow to characterize wave perturbations in temperatures and trace gas concentrations below flight level (<~14 km). This paper gives an overview of the mission objectives, the prevailing atmospheric conditions during the HALO deployment, and highlights some outstanding initial results of the gravity wave observations.</p>


2020 ◽  
Author(s):  
Jianbo Qi ◽  
Donghui Xie

<p>Three-dimensional (3D) radiative transfer (RT) modeling and simulation of the transport of radiation through earth surfaces is a challenging and difficult task. The difficulties lie in the complexity of the landscapes and also the intensive computational cost of 3D RT simulations. Current models usually work with abstract landscape elements to reduce complexity or only consider relatively small realistic scenes. In this study, a new 3D RT modeling framework (called LESS) is proposed. It employs a forward photon tracing method to simulate bidirectional reflectance factor (BRF) or flux-related data (e.g., downwelling radiation) and a backward path tracing method to generate sensor images (e.g., fisheye images) or large-scale (e.g. 1 km<sup>2</sup>) spectral images from visible to thermal infrared band. In this framework, a graphic user interface (GUI) and a set of tools are also provided to help to construct the landscape and set parameters, e.g., extracting tree crowns from airborne LiDAR data, which makes it more accessible to common users. The accuracy of LESS is evaluated with other models and field measurements in terms of directional BRF and pixel-wise comparisons. It shows that the accuracy of LESS is consistent with the reference models from RAMI model inter-comparison website (http://rami-benchmark.jrc.ec.europa.eu/HTML/Home.php) as well as field measurements. LESS has also been extended to simulate atmosphere, LiDAR and in-situ sensors. It provides as a useful tool for studying the radiative transfer process over complex forest canopies from leaf to canopy scales. The simulated datasets can be used as benchmarks for validating other physical remote sensing inversion algorithm and developing parameterized models for retrieving bio-geophysical variables of canopy. LESS can be accessed from http://lessrt.org.</p>


Sign in / Sign up

Export Citation Format

Share Document