scholarly journals Cloud type comparisons of AIRS, CloudSat, and CALIPSO cloud height and amount

2008 ◽  
Vol 8 (5) ◽  
pp. 1231-1248 ◽  
Author(s):  
B. H. Kahn ◽  
M. T. Chahine ◽  
G. L. Stephens ◽  
G. G. Mace ◽  
R. T. Marchand ◽  
...  
Keyword(s):  
Lower Layer ◽  
Cloud Amount ◽  
Satellite Observation ◽  
Retrieval Algorithm ◽  
Cloud Type ◽  
Atmospheric Infrared Sounder ◽  
Cloud Height ◽  
Wide Range ◽  
Low Cloud ◽  
Height Fields

Abstract. The precision of the two-layer cloud height fields derived from the Atmospheric Infrared Sounder (AIRS) is explored and quantified for a five-day set of observations. Coincident profiles of vertical cloud structure by CloudSat, a 94 GHz profiling radar, and the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO), are compared to AIRS for a wide range of cloud types. Bias and variability in cloud height differences are shown to have dependence on cloud type, height, and amount, as well as whether CloudSat or CALIPSO is used as the comparison standard. The CloudSat-AIRS biases and variability range from −4.3 to 0.5±1.2–3.6 km for all cloud types. Likewise, the CALIPSO-AIRS biases range from 0.6–3.0±1.2–3.6 km (−5.8 to −0.2±0.5–2.7 km) for clouds ≥7 km (<7 km). The upper layer of AIRS has the greatest sensitivity to Altocumulus, Altostratus, Cirrus, Cumulonimbus, and Nimbostratus, whereas the lower layer has the greatest sensitivity to Cumulus and Stratocumulus. Although the bias and variability generally decrease with increasing cloud amount, the ability of AIRS to constrain cloud occurrence, height, and amount is demonstrated across all cloud types for many geophysical conditions. In particular, skill is demonstrated for thin Cirrus, as well as some Cumulus and Stratocumulus, cloud types infrared sounders typically struggle to quantify. Furthermore, some improvements in the AIRS Version 5 operational retrieval algorithm are demonstrated. However, limitations in AIRS cloud retrievals are also revealed, including the existence of spurious Cirrus near the tropopause and low cloud layers within Cumulonimbus and Nimbostratus clouds. Likely causes of spurious clouds are identified and the potential for further improvement is discussed.

scholarly journals Cloud type comparisons of AIRS, CloudSat, and CALIPSO cloud height and amount

2007 ◽  
Vol 7 (5) ◽  
pp. 13915-13958 ◽  
Author(s):  
B. H. Kahn ◽  
M. T. Chahine ◽  
G. L. Stephens ◽  
G. G. Mace ◽  
R. T. Marchand ◽  
...  
Keyword(s):  
Lower Layer ◽  
Cloud Amount ◽  
Satellite Observation ◽  
Retrieval Algorithm ◽  
Cloud Type ◽  
Atmospheric Infrared Sounder ◽  
Cloud Height ◽  
Wide Range ◽  
Low Cloud ◽  
Height Fields

Abstract. The precision of the two-layer cloud height fields derived from the Atmospheric Infrared Sounder (AIRS) is explored and quantified for a five-day set of observations. Coincident profiles of vertical cloud structure by CloudSat, a 94 GHz profiling radar, and the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO), are compared to AIRS for a wide range of cloud types. Bias and variability in cloud height differences are shown to have dependence on cloud type, height, and amount, as well as whether CloudSat or CALIPSO is used as the comparison standard. The CloudSat–AIRS biases and variability range from −4.3 to 0.5±1.2–3.6 km for all cloud types. Likewise, the CALIPSO–AIRS biases range from 0.6–3.0±1.2–3.6 km (−5.8 to −0.2±0.5–2.7 km) for clouds ≥7 km (<7 km). The upper layer of AIRS has the greatest sensitivity to Altocumulus, Altostratus, Cirrus, Cumulonimbus, and Nimbostratus, whereas the lower layer has the greatest sensitivity to Cumulus and Stratocumulus. Although the bias and variability generally decrease with increasing cloud amount, the ability of AIRS to constrain cloud occurrence, height, and amount is demonstrated across all cloud types for many geophysical conditions. In particular, skill is demonstrated for thin Cirrus, as well as some Cumulus and Stratocumulus, cloud types infrared sounders typically struggle to quantify. Furthermore, some improvements in the AIRS Version 5 operational retrieval algorithm are demonstrated. However, limitations in AIRS cloud retrievals are also revealed, including the existence of spurious Cirrus near the tropopause and low cloud layers within Cumulonimbus and Nimbostratus clouds. Likely causes of spurious clouds are identified and the potential for further improvement is discussed.

On the Relationship between Stratiform Low Cloud Cover and Lower-Tropospheric Stability

2006 ◽  
Vol 19 (24) ◽  
pp. 6425-6432 ◽  
Author(s):  
Robert Wood ◽  
Christopher S. Bretherton
Keyword(s):  
Boundary Layer ◽  
Temperature Profile ◽  
Cloud Cover ◽  
Cloud Amount ◽  
Lapse Rate ◽  
Stratus Cloud ◽  
Low Clouds ◽  
Wide Range ◽  
Low Cloud ◽  
Low Cloud Cover

Abstract Observations in subtropical regions show that stratiform low cloud cover is well correlated with the lower-troposphere stability (LTS), defined as the difference in potential temperature θ between the 700-hPa level and the surface. The LTS can be regarded as a measure of the strength of the inversion that caps the planetary boundary layer (PBL). A stronger inversion is more effective at trapping moisture within the marine boundary layer (MBL), permitting greater cloud cover. This paper presents a new formulation, called the estimated inversion strength (EIS), to estimate the strength of the PBL inversion given the temperatures at 700 hPa and at the surface. The EIS accounts for the general observation that the free-tropospheric temperature profile is often close to a moist adiabat and its lapse rate is strongly temperature dependent. Therefore, for a given LTS, the EIS is greater at colder temperatures. It is demonstrated that while the seasonal cycles of LTS and low cloud cover fraction (CF) are strongly correlated in many regions, no single relationship between LTS and CF can be found that encompasses the wide range of temperatures occurring in the Tropics, subtropics, and midlatitudes. However, a single linear relationship between CF and EIS explains 83% of the regional/seasonal variance in stratus cloud amount, suggesting that EIS is a more regime-independent predictor of stratus cloud amount than is LTS under a wide range of climatological conditions. The result has some potentially important implications for how low clouds might behave in a changed climate. In contrast to Miller’s thermostat hypothesis that a reduction in the lapse rate (Clausius–Clapeyron) will lead to increased LTS and increased tropical low cloud cover in a warmer climate, the results here suggest that low clouds may be much less sensitive to changes in the temperature profile if the vertical profile of tropospheric warming follows a moist adiabat.

scholarly journals A new algorithm for detecting cloud height using OMPS/LP measurements

2016 ◽  
Vol 9 (3) ◽  
pp. 1239-1246 ◽  
Author(s):  
Zhong Chen ◽  
Matthew DeLand ◽  
Pawan K. Bhartia
Keyword(s):  
Lower Boundary ◽  
Vertical Gradient ◽  
Satellite Observation ◽  
Detection Algorithm ◽  
Retrieval Algorithm ◽  
Cloud Detection ◽  
Near Ir ◽  
Cloud Height ◽  
Good Agreement

Abstract. The Ozone Mapping and Profiler Suite Limb Profiler (OMPS/LP) ozone product requires the determination of cloud height for each event to establish the lower boundary of the profile for the retrieval algorithm. We have created a revised cloud detection algorithm for LP measurements that uses the spectral dependence of the vertical gradient in radiance between two wavelengths in the visible and near-IR spectral regions. This approach provides better discrimination between clouds and aerosols than results obtained using a single wavelength. Observed LP cloud height values show good agreement with coincident Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) measurements.

scholarly journals Space-borne observation of methane from atmospheric infrared sounder version 6: validation and implications for data analysis

2015 ◽  
Vol 8 (8) ◽  
pp. 8563-8597 ◽  
Author(s):  
X. Xiong ◽  
F. Weng ◽  
Q. Liu ◽  
E. Olsen
Keyword(s):  
Data Analysis ◽  
Cloud Amount ◽  
Retrieval Algorithm ◽  
Atmospheric Methane ◽  
Atmospheric Infrared Sounder ◽  
Northern Latitudes ◽  
Standard Product ◽  
The Mean ◽  
The Tropics ◽  
Recent Version

Abstract. Atmospheric Methane (CH4) is generated as a standard product in recent version of the hyperspectral Atmospheric Infrared Sounder (AIRS-V6) aboard NASA's Aqua satellite at the NASA Goddard Earth Sciences Data and Information Services Center (NASA/GES/DISC). Significant improvements in AIRS-V6 was expected but without a thorough validation. This paper first introduced the improvements of CH4 retrieval in AIRS-V6 and some characterizations, then presented the results of validation using ~ 1000 aircraft profiles from several campaigns spread over a couple of years and in different regions. It was found the mean biases of AIRS CH4 at layers 343–441 and 441–575 hPa are −0.76 and −0.05 % and the RMS errors are 1.56 and 1.16 %, respectively. Further analysis demonstrates that the errors in the spring and in the high northern latitudes are larger than in other seasons or regions. The error is correlated with Degree of Freedoms (DOFs), particularly in the tropics or in the summer, and cloud amount, suggesting that the "observed" spatiotemporal variation of CH4 by AIRS is imbedded with some artificial impact from the retrieval sensitivity in addition to its variation in reality, so the variation of information content in the retrievals needs to be taken into account in data analysis of the retrieval products. Some additional filtering (i.e. rejection of profiles with obvious oscillation as well as those deviating greatly from the norm) for quality control is recommended for the users to better utilize AIRS-V6 CH4, and their implementation in the future versions of the AIRS retrieval algorithm is under consideration.

scholarly journals A new algorithm for detecting cloud height using OMPS/LP measurements

2015 ◽  
Vol 8 (10) ◽  
pp. 10159-10177
Author(s):  
Z. Chen ◽  
M. DeLand ◽  
P. K. Bhartia
Keyword(s):  
Lower Boundary ◽  
Vertical Gradient ◽  
Satellite Observation ◽  
Detection Algorithm ◽  
Retrieval Algorithm ◽  
Cloud Detection ◽  
Near Ir ◽  
Cloud Height ◽  
Good Agreement

Abstract. The Ozone Mapping and Profiler Suite Limb Profiler (OMPS/LP) ozone product requires the determination of cloud height for each event to establish the lower boundary of the profile for the retrieval algorithm. We have created a revised cloud detection algorithm for LP measurements that uses the spectral dependence of the vertical gradient in radiance between two wavelengths in the visible and near-IR spectral regions. This approach provides better discrimination between clouds and aerosols than results obtained using a single wavelength. Observed LP cloud height values show good agreement with coincident Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) measurements.

Assessment of Arctic Cloud Cover Anomalies in Atmospheric Reanalysis Products Using Satellite Data

2016 ◽  
Vol 29 (17) ◽  
pp. 6065-6083 ◽  
Author(s):  
Yinghui Liu ◽  
Jeffrey R. Key
Keyword(s):  
Cloud Cover ◽  
Climate Models ◽  
Global Climate ◽  
Correlation Coefficients ◽  
Cloud Amount ◽  
Satellite Observation ◽  
Skill Score ◽  
Global Climate Models ◽  
Moderate Resolution ◽  
Moderate Resolution Imaging Spectroradiometer

Abstract Cloud cover is one of the largest uncertainties in model predictions of the future Arctic climate. Previous studies have shown that cloud amounts in global climate models and atmospheric reanalyses vary widely and may have large biases. However, many climate studies are based on anomalies rather than absolute values, for which biases are less important. This study examines the performance of five atmospheric reanalysis products—ERA-Interim, MERRA, MERRA-2, NCEP R1, and NCEP R2—in depicting monthly mean Arctic cloud amount anomalies against Moderate Resolution Imaging Spectroradiometer (MODIS) satellite observations from 2000 to 2014 and against Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) observations from 2006 to 2014. All five reanalysis products exhibit biases in the mean cloud amount, especially in winter. The Gerrity skill score (GSS) and correlation analysis are used to quantify their performance in terms of interannual variations. Results show that ERA-Interim, MERRA, MERRA-2, and NCEP R2 perform similarly, with annual mean GSSs of 0.36/0.22, 0.31/0.24, 0.32/0.23, and 0.32/0.23 and annual mean correlation coefficients of 0.50/0.51, 0.43/0.54, 0.44/0.53, and 0.50/0.52 against MODIS/CALIPSO, indicating that the reanalysis datasets do exhibit some capability for depicting the monthly mean cloud amount anomalies. There are no significant differences in the overall performance of reanalysis products. They all perform best in July, August, and September and worst in November, December, and January. All reanalysis datasets have better performance over land than over ocean. This study identifies the magnitudes of errors in Arctic mean cloud amounts and anomalies and provides a useful tool for evaluating future improvements in the cloud schemes of reanalysis products.

scholarly journals On the relationship between low cloud variability and lower tropospheric stability in the Southeast Pacific

2011 ◽  
Vol 11 (2) ◽  
pp. 3777-3811
Author(s):  
F. Sun ◽  
A. Hall ◽  
X. Qu
Keyword(s):  
Climate Change ◽  
Seasonal Cycle ◽  
Austral Summer ◽  
Cloud Amount ◽  
Anthropogenic Climate Change ◽  
Cloud Feedbacks ◽  
Southeast Pacific ◽  
Low Cloud ◽  
Lower Tropospheric Stability ◽  
The Relationship

Abstract. In this study, we examine observed marine low cloud variability in the southeast Pacific and its association with lower-tropospheric stability (LTS) across a spectrum of timescales. On both daily and interannual timescales, LTS and low cloud amount are very well correlated in austral summer (DJF). Meanwhile in winter (JJA), when ambient LTS increases, the LTS-low cloud relationship disintegrates. The DJF LTS-low cloud relationship also weakens in years with unusually large ambient LTS values. These are generally strong El Niño years, in which DJF LTS values are comparable to those typically found in JJA. Thus the LTS-low cloud relationship is strongly modulated by the seasonal cycle and the ENSO phenomenon. We also investigate the origin of LTS anomalies closely associated with low cloud variability during austral summer. We find that the ocean and atmosphere are independently involved in generating anomalies in LTS and hence variability in the southeast Pacific low cloud deck. This highlights the coupled nature of the climate system in this region, and raises the possibility of cloud feedbacks related to LTS. We conclude by addressing the implications of the observed LTS-low cloud relationship in the southeast Pacific for low cloud feedbacks in anthropogenic climate change.

scholarly journals Reliability Evaluation of the Joint Observation of Cloud Top Height by FY-4A and HIMAWARI-8

2021 ◽  
Vol 13 (19) ◽  
pp. 3851
Author(s):  
Qinghui Li ◽  
Xuejin Sun ◽  
Xiaolei Wang
Keyword(s):  
Measurement Method ◽  
Satellite Observation ◽  
Geostationary Satellite ◽  
Cloud Type ◽  
Surface Type ◽  
Geostationary Satellites ◽  
Good Consistency ◽  
Passive Sensors ◽  
Cloud Optical Thickness ◽  
Important Measurement

It is well known that the measurement of cloud top height (CTH) is important, and a geostationary satellite is an important measurement method. However, it is difficult for a single geostationary satellite to observe the global CTH, so joint observation by multiple satellites is imperative. We used both active and passive sensors to evaluate the reliability of joint observation of geostationary satellites, which includes consistency and accuracy. We analyzed the error of CTH of FY-4A and HIMAWARI-8 and the consistency between the two satellites and conducted research on the problem of missing measurement (Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) has CTH data, but FY-4A/HIMAWARI-8 does not) of the two satellites. The results show that FY-4A and HIMAWARI-8 have good consistency and can be jointly observed, but the measurement of CTH of FY-4A and HIMAWARI-8 has large errors, and the error of FY-4A is greater than that of HIMAWIRI-8. The error of CTH is affected by the CTH, cloud optical thickness (COT) and cloud type, and the consistency between the two satellites is mainly affected by the cloud type. FY-4A and HIMAWARI-8 have the problem of missing measurement. The missing rate of HIMAWARI-8 is greater than that of FY-4A, and the missing rate is not affected by the CTH, COT and surface type. Therefore, although FY-4A and HIMAWARI-8 have good consistency, the error of CTH and the problem of missing measurement still limit the reliability of their joint observation.

scholarly journals Retrievals of Tropospheric Ozone Profiles from the Synergic Observation of AIRS and OMI: Methodology and Validation

2018 ◽  
Author(s):  
Dejian Fu ◽  
Susan S. Kulawik ◽  
Kazuyuki Miyazaki ◽  
Kevin W. Bowman ◽  
John R. Worden ◽  
...  
Keyword(s):  
Standard Deviation ◽  
Measurement Uncertainty ◽  
Tropospheric Ozone ◽  
Retrieval Algorithm ◽  
Vertical Resolution ◽  
Ozone Monitoring Instrument ◽  
Atmospheric Infrared Sounder ◽  
Global Coverage ◽  
Ozone Monitoring ◽  
Wide Swath

Abstract. The Tropospheric Emission Spectrometer (TES) on the A-Train Aura satellite was designed to profile tropospheric ozone and its precursors, taking measurements from 2004 to 2018. Starting in 2008, TES global sampling of tropospheric ozone was gradually reduced in latitude with global coverage stopping in 2011. To extend the record of TES, this work presents a multispectral approach that will provide O3 data products with vertical resolution and measurement uncertainty similar to TES by combining the single-footprint thermal infrared (TIR) hyperspectral radiances from the Aqua Atmospheric Infrared Sounder (AIRS) instrument and the ultraviolet (UV) channels from the Aura Ozone Monitoring Instrument (OMI). The joint AIR+OMI O3 retrievals are processed through the MUlti-SpEctra, MUlti-SpEcies, MUlti-SEnsors (MUSES) retrieval algorithm. Comparisons of collocated joint AIRS+OMI and TES to ozonesonde measurements show that both systems have similar errors, with mean and standard deviation of the differences well within the estimated measurement uncertainty. AIRS+OMI and TES have slightly different biases (within 5 parts per billion) versus the sondes. Both AIRS and OMI have wide swath widths (~ 1,650 km for AIRS; ~ 2,600 km for OMI) across satellite ground tracks. Consequently, the joint AIRS+OMI measurements have the potential to maintain TES vertical sensitivity while increasing coverage by two orders of magnitude, thus providing an unprecedented new dataset to quantify the evolution of tropospheric ozone.

Sign in / Sign up

Export Citation Format

Share Document