Quantification of micron-scale structural and hydraulic properties of long-term pig manure and lime amended red soil aggregates using the lattice Boltzmann method and pore network modelling

Author(s):  
Rong Qu ◽  
Hu Zhou ◽  
Paul Hallet

<p>Lime and animal manure can have major impacts on soil physical properties, particularly in degraded and highly weathered soils that are naturally acidic. Here we evaluate how treatment of a regular till Acrisol in southeast China with different amounts of lime and/or pig manure, and planted with maize, affects pore scale properties down to micron size using synchrotron microtomography (SR–mCT). Soil macroaggregates (2 - 5 mm) from 4 treatments were measured: 1) Control, no manure amendment; 2) low manure (150 kg N ha<sup>-1</sup> y<sup>-1</sup>); 3) high manure (600 kg N ha<sup>-1</sup> y<sup>-1</sup>); and 4) high manure (600 kg N ha<sup>-1</sup> y<sup>-1</sup>)+ lime (3000 kg Ca(OH)<sub>2</sub> ha<sup>-1 </sup>every 3 years). Pore structure at a resolution of 3.7 µm was reconstructed in 3D and the Multi- Relaxation- Time (MRT) Scheme for Multi- Phase Lattice Boltzmann Method (LBM) was used to simulate water flow and retention. Topological analysis was performed based on the extracted pore network by using the maximal ball-based pore network extraction. A quasi-static pore network solver was applied to compute the capillary pressure based on the extracted pore networks. The application of a high amount of pig manure increased the fraction of macropores (>100 µm) to 38.61% compared to the controlled level (18.15%). A high amount of pig manure also decreased total porosity to 8.08% compared to 11.35% for the control, suggesting less micropores caused by high pig manure treatment. The application of high amount of pig manure and lime also caused more uniform water flow. Control samples had a velocity frequency at around e<sup>11 </sup>of the normalized velocity (respect to the mean), while the samples from the other treatments had more evenly distributed peaks. Water flows most quickly due to least impediment by pores in the samples with high manure amendment. The slope between permeability and porosity increased from 8.10 Darcy (<!-- Units? -->controlled) to 174.47 Darcy (high amount of manure treatment). The amendment of 600 kg N ha<sup>-1</sup> y<sup>-1 </sup>pig manure increased water retention ability calculated by the simulations. For the capillary pressure > -50 kPa, control samples had the greatest water saturation level compared with the samples from the other treatments, while there were no significant differences of water saturation of samples from all the treatments for the capillary pressure < -1000 kPa . The simulated water retention results had the same trend with the measured results.</p>

2020 ◽  
Vol 195 ◽  
pp. 02009
Author(s):  
Eduard Puig Montellà ◽  
Chao Yuan ◽  
Bruno Chareyre ◽  
Antonio Gens

Lattice Boltzmann method (LBM) simulations provide an excellent description of two-phase flow through porous media. However, such simulations require a significant computation time. In order to optimize the computation resources, we propose a hybrid model that combines the efficiency of the pore-network approach and the accuracy of the lattice Boltzmann method at the pore scale. The hybrid model is based on the decomposition of the granular assembly into small subsets, in which LBM simulations are performed to determine the main hydrostatic properties (entry capillary pressure, capillary pressure - liquid content relationship and liquid morphology for each pore throat). A primary drainage of a random packing of spheres is presented and contrasted to the results of the same problem fully resolved by the LBM. Liquid morphology and invasion paths are correctly reproduced by the hybrid method.


Author(s):  
Omar Al-Farisi ◽  
Hadi Belhaj ◽  
Fatmah Yammahi ◽  
Abdulla Al-Shemsi ◽  
Hocine Khemissa

Rock typing is one of the most important steps in reservoir modeling, and it’s the main task in reservoir characterization. In carbonate, the rock typing work that’s been performed during the last two decades had a little progress in term of providing reliable estimation of reservoir behavior. However, the development of Conjunction Rock Properties Convergence, CROPC, a carbonate rock typing concept that provided an important and easy solution to the carbonate rock typing gaps, has a major breakthrough, even though, CROPC methodology was developed to capture the single pore network through the conjunction of Lithology, permeability, capillary pressure and water saturation. Therefore, the need to identify more complex carbonate pore network had led to the initiation of developing the Carbonate Rock Type Matrix RocMat, which will be detailed in this paper, as part of a Master of Science research project. In this novel concept the carbonate rocks were classified into homogeneous, single pore network, and heterogeneous rocks, dual and triple pore network with the utilization of the effective petrophysical properties of permeability, capillary pressure, saturation, porosity and height above free water level, all were classified in a conjunction matrix that honors these properties and at the same time enables generating sub groups as down scaling and estimation for unseen groups with infinite rock complexity capturing, at the same time it enables the ease to lump the groups and generates upscale-groups that make it easier for utilization by the geologist and reservoir engineers to achieve the objective of better reservoir performance prediction, the work was performed and then tested in two carbonate offshore fields data. This RocMat was structured to be the ultimate catalog for carbonate rock types.


2021 ◽  
Vol 249 ◽  
pp. 09007
Author(s):  
Reihaneh Hosseini ◽  
Krishna Kumar ◽  
Jean-Yves Delenne

The soil water retention curve (SWRC) is the most commonly used relationship in the study of unsaturated soil. In this paper, the effect of porosity on the SWRC is investigated by numerically modeling unsaturated soil using the Shan-Chen multiphase Lattice Boltzmann Method. The shape of simulated SWRCs are compared against that predicted by the van Genuchten model, demonstrating a good fit except at low degrees of saturation. The simulated SWRCs show an increase in the air-entry value as porosity decreases.


2010 ◽  
Vol 24 (13) ◽  
pp. 1275-1278 ◽  
Author(s):  
CHANG SHU ◽  
JIE WU

An efficient lattice Boltzmann method (LBM) on non-uniform Cartesian mesh is presented in this work. In the standard LBM, the uniform mesh is used. To well capture the boundary layer and in the meantime, to save computational effort, many efforts have been made to improve the LBM so that it can be implemented on the non-uniform mesh. On the other hand, LBM has been combined with other numerical schemes to simulate complex flows recently. To solve immersed boundary (IB) problem efficiently, a new version of LBM on non-uniform Cartesian mesh is proposed in this study. A second-order local interpolation is used to calculate the distribution function at a position different from mesh points. The numerical results from the simulation of flow over a circular cylinder compare well with the data in literature.


Sign in / Sign up

Export Citation Format

Share Document