Signature of coseismic slip in unconsolidated Quaternary gravels, Campo Imperatore, Italy

2020 ◽  
Author(s):  
Matteo Demurtas ◽  
Fabrizio Balsamo ◽  
Mattia Pizzati
Keyword(s):  
Grain Size ◽  
Microstructural Analysis ◽  
Early Pleistocene ◽  
Fault System ◽  
Grain Size Analysis ◽  
Near Surface ◽  
Geological Evidence ◽  
Fault Surface ◽  
Mechanics Of Faulting ◽  
Late Pleistocene To Holocene

<p>Faulting in seismically active regions commonly involves the deformation of unconsolidated to poorly lithified sediments. The seldom occurrence of seismic slip within these deposits appears to be counterintuitive if compared to classic crustal strength profiles that predict a velocity-strengthening behaviour for the first few km of depth. Therefore, the investigation of geological evidence for coseismic faulting within unconsolidated deposits is a key step towards a broader understanding of mechanisms of strain accommodation at shallow to near-surface depth.</p><p>Here we document the occurrence of minor faults within an unconsolidated colluvial fan at the hanging wall of the Vado di Corno Fault Zone (VCFZ) in the Central Apennines, Italy. The VCFZ is part of the active Campo Imperatore Fault System and accommodated 1-2 km of displacement since Early-Pleistocene. The deposits lie in direct contact with the master fault surface, are Late-Pleistocene to Holocene in age, and consist of angular carbonatic clasts, up to tens of centimetres in size, derived from the dismantling of the VCFZ footwall.</p><p>Studied faults are organised in two main sets: (i) subvertical, N-S trending dip-slip faults, parallel to the fan long axis, and (ii) WNW-ESE striking faults, synthetic and antithetic to the VCFZ master fault surface (N195/55°). Both fault sets are striated and commonly have positive relief with respect to the host deposits. Some of these faults show a fault core up to 5-6 cm thick, bounded by discrete and well-developed polished surfaces. Locally, particularly in fine-grained gravel levels, the occurrence of extreme strain localisation (i.e. millimetric ultracataclastic layers with truncated clasts) along mirror-like fault surfaces is observed. Grain size analysis of undeformed and faulted gravels shows an increase of the power-law exponent (fractal dimension) from values of D = 1.65-2.2 in the undeformed host rocks up to D = 2.9 in the cataclastic slip zones. Microstructural analysis suggests cataclasis is the main deformation mechanism leading to grain size reduction along faults, whereas intergranular pressure solution becomes widespread moving away from the slip zone where fluid circulation was present.</p><p>Collectively, our observations provide new insights into the mechanics of faulting and strain accommodation in the shallowest part of the crust (< 1 km) and new evidence to understand the propagation of seismic ruptures within shallow unconsolidated deposits.</p>

Mirror fault formation and coseismic slip at surface conditions: an example of faulting in unconsolidated deposits in the Central Apennines (Italy)

2021 ◽  
Author(s):  
Matteo Demurtas ◽  
Oliver Plümper ◽  
Markus Ohl ◽  
Fabrizio Balsamo ◽  
Mattia Pizzati
Keyword(s):  
Grain Boundaries ◽  
Amorphous Material ◽  
Hanging Wall ◽  
Microstructural Analysis ◽  
Central Apennines ◽  
Near Surface ◽  
Fault Surface ◽  
Mechanics Of Faulting ◽  
Seismic Rupture ◽  
Late Pleistocene To Holocene

<p>Faulting in seismically active regions commonly involves the deformation of unconsolidated to poorly lithified sediments at shallow to near-surface depths. When compared to classic crustal strength profiles that predict a velocity-strengthening behaviour for the first few km of depth, the propagation of seismic rupture to the surface appears counterintuitive. Rock deformation experiments have shown an inverse relationship between normal stress and displacement needed to the onset of dynamic weakening during seismic slip, meaning that for a seismic rupture to be able to propagate towards the surface, displacements should be large enough to counter the progressive decrease of normal and confining stresses.</p><p>In this contribution, we document the occurrence of mirror-like faults that formed within 20-30 m-thick, unconsolidated colluvium fan deposits at the hanging wall of the active Vado di Corno Fault Zone (VCFZ) in the Central Apennines, Italy. The deposits lie in direct contact with the master normal-fault surface, are Late Pleistocene to Holocene in age, and consist of angular carbonate clasts with grain size ranging ~0.1-10 mm derived from the dismantling of the adjacent VCFZ footwall. Field observations of cross cutting relationships and marker layer displacements suggest a maximum formation depth of the faults of c. 20-30 m and slip accommodated along single faults on the order of few cm. Faults are organised in three sets: subvertical, N-S and NE-SW trending faults, and WNW-ESE striking faults, synthetic and antithetic to the VCFZ master fault surface (N195/55°). Faults are commonly lineated with a dip-slip to slightly oblique kinematic.</p><p>Detailed microstructural analysis of the mirror faults shows extreme strain localization on a 2-5 µm thick principal slip zone composed of calcite nanograins ranging 10s-100s nm in size with amorphous material and phyllosilicates occurring along grain boundaries and within intragranular porosity. Locally, aggregates of nanograins coalesce and transition to µm-sized polygonal, larger grains. Calcite nanograins are mostly equant, with straight grain boundaries, 120° dihedral angles, and negligible porosity. These microstructures strongly resemble high temperature recrystallization structures documented along seismic faults exhumed from >5 km of depth, where stresses are significantly larger. In our case, field constraints show that deformation occurred in very confining stress conditions and with limited displacement.</p><p>Collectively, our observations provide new documentation on the conditions for the formation of mirror faults and new insights into the mechanics of faulting and strain accommodation in the shallowest part of the crust (< 1 km).</p>

The Fairbanks earthquakes of June 21, 1967; aftershock distribution, focal mechanisms, and crustal parameters

1969 ◽  
Vol 59 (1) ◽  
pp. 73-100
Author(s):  
Larry Gedney ◽  
Eduard Berg
Keyword(s):  
P Wave ◽  
Fault System ◽  
Crustal Layer ◽  
Near Surface ◽  
Fault Surface ◽  
True Value ◽  
Regional Tectonic ◽  
Tectonic System ◽  
Relationship Of ◽  
The Relationship

Abstract A series of moderately severe earthquakes occurred in the vicinity of Fairbanks, Alaska, on the morning of June 21, 1967. During the following months, many thousands of aftershocks were recorded in order to outline the aftershock zone and to resolve the focal mechanism and its relation to the regional tectonic system. No fault is visible at the surface in this area. Foci were found to occupy a relatively small volume in the shape of an ablate cylinder tilted about 30° from the vertical. The center of the zone lay about 12 kilometers southeast of Fairbanks. Focal depths ranged from near-surface to 25 kilometers, although most were in the range 9-16 km. In the course of the investigation, it was found that the Jeffreys and Bullen velocity of 5.56 km/sec for the P wave in the upper crustal layer is very near the true value for this arec, and that the use of 1.69 for the Vp/Vs ratio gives good results in most cases. The proposed faulting mechanism involves nearly equal components of right-lateral strike slip, and normal faulting with northeast side downthrown on a system of sub-parallel faults striking N40°W. The fault surface appears to be curved—dipping from near vertical close to the surface to less steep northeast dips at greater depths. The relationship of this fault system with the grosser aspects of regional tectonism is not clear.

Mixed-Mode Seismic Slip and Aseismic Creep on a Highly Active Low-Angle Normal Fault System in Papua New Guinea

2020 ◽  
Author(s):  
James Biemiller ◽  
Laura Wallace ◽  
Luc Lavier
Keyword(s):  
Papua New Guinea ◽  
Normal Fault ◽  
New Guinea ◽  
Fault System ◽  
Normal Faults ◽  
Fault Mechanics ◽  
Fault Rocks ◽  
Near Surface ◽  
Geological Evidence ◽  
Seismic Slip

<p>Whether low-angle normal faults (LANFs; dip < 30°) slip in large earthquakes or creep aseismically is a longstanding problem in fault mechanics. Although abundant in the geologic record, active examples of these enigmatic ‘misoriented’ structures are rare and extension rates across them are typically less than a few mm/yr. As such, geodetic and seismological observations of LANFs are sparse and can be difficult to interpret in terms of earthquake cycles. With a long-term slip rate of ~1 cm/yr, the Mai’iu fault in Papua New Guinea may be the world’s most active LANF and thus offers an outstanding natural laboratory to evaluate seismic vs. aseismic behavior of LANFs. Here, we use new results from a campaign GPS network to determine the degree of locking vs. aseismic creep on the Mai’iu fault and evaluate these results in the context of geological evidence for mixed seismic and aseismic slip in exhumed Mai’iu fault rocks.</p><p>We derive velocities from GPS measurements with 3-4 km station spacing above the shallowest portions of the fault, which dips 21-25° at the surface. Dislocation modeling of these velocities is consistent with 6-8 mm/yr of horizontal extension, corresponding to ~1 cm/yr dip-slip rates on a 27-35°-dipping fault. Strain rates and vertical derivatives of horizontal stress rates derived from these velocities confirm localized extension across the fault. We compare and evaluate two interseismic locking models that fit the data best: one in which the fault deforms by shallow near-surface creep updip of a deeper zone of increased interseismic coupling which soles into a steadily creeping shear zone at depth, and one in which the fault creeps steadily downdip of a shallowly locked patch. These results combined with field and microstructural evidence from the exhumed fault rocks suggest that the fault slips by a mixture of brittle frictional (seismic slip, fracturing, and cataclastic creep) and viscous (stress-driven dissolution-precipitation creep, or pressure solution) processes. Using depth-constrained mechanical properties and stress conditions inferred from exhumed fault rocks, we model the time-dependent competition between frictional slip and viscous creep to assess where and how elastic strain accumulates along the Mai’iu fault, and whether the fault is capable of hosting or nucleating earthquakes.</p>

scholarly journals Holocene surface-rupturing earthquakes on the Dinaric Fault System, western Slovenia

Solid Earth ◽  
2021 ◽  
Vol 12 (10) ◽  
pp. 2211-2234
Author(s):  
Christoph Grützner ◽  
Simone Aschenbrenner ◽  
Petra Jamšek Rupnik ◽  
Klaus Reicherter ◽  
Nour Saifelislam ◽  
...  
Keyword(s):  
Late Quaternary ◽  
Active Faults ◽  
Historical Seismicity ◽  
Fault System ◽  
Historical Event ◽  
Near Surface ◽  
Geological Evidence ◽  
Geophysical Surveys ◽  
Deformation Features ◽  
Surface Ruptures

Abstract. The Dinaric Fault System in western Slovenia, consisting of NW–SE-trending, right-lateral strike-slip faults, accommodates the northward motion of Adria with respect to Eurasia. These active faults show a clear imprint in the morphology, and some of them hosted moderate instrumental earthquakes. However, it is largely unknown if the faults also had strong earthquakes in the late Quaternary. This hampers our understanding of the regional tectonics and the seismic hazard. Geological evidence of co-seismic surface ruptures only exists for one historical event, the 1511 Idrija earthquake with a magnitude of ∼ M 6.8, but the causative fault is still disputed. Here we use geomorphological data, near-surface geophysical surveys, and paleoseismological trenching to study two of these faults: the Predjama Fault and the Idrija Fault. In a paleoseismological trench across the Predjama Fault we found deformation features that may have been caused by an earthquake between 13–0.7 ka, very likely not earlier than 8.4 ka. At the Idrija Fault, a surface-rupturing earthquake happened around 2.5 ka. We show that instrumental and historical seismicity data do not capture the strongest events in this area.

scholarly journals Holocene surface rupturing earthquakes on the Dinaric Fault System, western Slovenia

2021 ◽  
Author(s):  
Christoph Grützner ◽  
Simone Aschenbrenner ◽  
Petra Jamšek Rupnik ◽  
Klaus Reicherter ◽  
Nour Saifelislam ◽  
...  
Keyword(s):  
Late Quaternary ◽  
Active Faults ◽  
Historical Seismicity ◽  
Fault System ◽  
Historical Event ◽  
Near Surface ◽  
Geological Evidence ◽  
Strong Earthquakes ◽  
Geophysical Surveys ◽  
Seismic Moment Release

Abstract. The Dinaric Fault System in western Slovenia, consisting of NW-SE trending, right-lateral strike-slip faults, accommodates the northward motion of Adria with respect to Eurasia. These active faults show a clear imprint in the morphology and some of them hosted moderate instrumental earthquakes. However, it is largely unknown if the faults also had strong earthquakes in the Late Quaternary. This hampers our understanding of the regional tectonics and the seismic hazard. Geological evidence of co-seismic surface ruptures only exists for one historical event, the 1511 Idrija Earthquake with a magnitude of ~M6.8, but the causative fault is still disputed. Here we use geomorphological data, near-surface geophysical surveys, and paleoseismological trenching to show that two of these faults, the Predjama Fault and the Idrija Fault ruptured in strong earthquakes in the Holocene. In a paleoseismological trench across the Predjama Fault we found at least one earthquake with a minimum magnitude of MW6.1 that occurred between 13–0.7 ka, very likely not earlier than 8.4 ka. At the Idrija Fault, a surface-rupturing earthquake with a magnitude of at least MW6.1 happened in the last ~2.1 ka. This event could correspond to the 1511 Idrija earthquake. Our results show that the faults rupture in rare, but strong earthquakes, which dominate the seismic moment release. We show that instrumental and historical seismicity data do not capture the strongest events in this area. The fact that many of the NW-SE trending, parallel faults are active implies that the deformation in western Slovenia is distributed, rather than focussed on one major structure.

scholarly journals Geochemical and Mineralogical Characterisation of Historic Zn–Pb Mine Waste, Plombières, East Belgium

Minerals ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 28
Author(s):  
Srećko Bevandić ◽  
Rosie Blannin ◽  
Jacqueline Vander Auwera ◽  
Nicolas Delmelle ◽  
David Caterina ◽  
...  
Keyword(s):  
Grain Size ◽  
Mine Waste ◽  
Geophysical Methods ◽  
Grain Size Analysis ◽  
Size Analysis ◽  
Mine Wastes ◽  
Metallurgical Waste ◽  
High Concentration ◽  
Geochemical Properties ◽  
Potential Applications

Mine wastes and tailings derived from historical processing may contain significant contents of valuable metals due to processing being less efficient in the past. The Plombières tailings pond in eastern Belgium was selected as a case study to determine mineralogical and geochemical characteristics of the different mine waste materials found at the site. Four types of material were classified: soil, metallurgical waste, brown tailings and yellow tailings. The distribution of the mine wastes was investigated with drill holes, pit-holes and geophysical methods. Samples of the materials were assessed with grain size analysis, and mineralogical and geochemical techniques. The mine wastes dominantly consist of SiO2, Al2O3 and Fe2O3. The cover material, comprising soil and metallurgical waste is highly heterogeneous in terms of mineralogy, geochemistry and grain size. The metallurgical waste has a high concentration of metals (Zn: 0.1 to 24 wt.% and Pb: 0.1 to 10.1 wt.%). In the tailings materials, Pb and Zn vary from 10 ppm to 8.5 wt.% and from 51 ppm to 4 wt.%, respectively. The mining wastes comprises mainly quartz, amorphous phases and phyllosilicates, with minor contents of Fe-oxide and Pb- and Zn-bearing minerals. Based on the mineralogical and geochemical properties, the different potential applications of the four waste material types were determined. Additionally, the theoretical economic potential of Pb and Zn in the mine wastes was estimated.

scholarly journals Centennial Impacts of the East Asian Summer Monsoon on Holocene Deltaic Evolution of the Huanghe River, China

2021 ◽  
Vol 11 (6) ◽  
pp. 2799
Author(s):  
Yanping Chen ◽  
Wenzhe Lyu ◽  
Tengfei Fu ◽  
Yan Li ◽  
Liang Yi
Keyword(s):  
Grain Size ◽  
Yellow River ◽  
Asian Summer Monsoon ◽  
River Delta ◽  
Grain Size Analysis ◽  
Size Analysis ◽  
Sediment Grain Size ◽  
Huanghe River ◽  
Huanghe River Delta ◽  
The Huanghe River

The Huanghe River (Yellow River) is the most sediment laden river system in the world, and many efforts have been conducted to understand modern deltaic evolution in response to anthropological impacts. However, the natural background and its linkage to climatic changes are less documented in previous studies. In this work, we studied the sediments of core YDZ–3 and marine surface samples by grain-size analysis to retrieve Holocene dynamics of the Huanghe River delta in detail. The main findings are as follows: The mean value of sediment grain size of the studied core is 5.5 ± 0.9 Φ, and silt and sand contents are 5.2 ± 2.3% and 8.2 ± 5.3%, respectively, while the variance of clay particles is relatively large with an average value of 86.4 ± 8.5%. All grain-size data can be mathematically partitioned by a Weibull-based function formula, and three subgroups were identified with modal sizes of 61.1 ± 28.9 μm, 30.0 ± 23.9 μm, and 2.8 ± 1.6 μm, respectively. There are eight intervals with abrupt changes in modal size of core YDZ–3, which can be correlated to paleo-superlobe migration of the Huanghe River in the Holocene. Based on these observations, the presence of seven superlobes in the history are confirmed for the first time and their ages are well constrained in this study, including Paleo-Superlobes Lijin (6400–5280 yr BP), Huanghua (4480–4190 yr BP), Jugezhuang (3880–3660 yr BP), Shajinzi (3070–2870 yr BP), Nigu (2780–2360 yr BP), Qikou (2140–2000 yr BP), and Kenli (1940–1780 and 1700–1650 yr BP). By tuning geomorphological events to a sedimentary proxy derived from core YDZ–3 and comparing to various paleoenvironmental changes, we proposed that winter climate dominated Holocene shifts of the Huanghe River delta on millennial timescales, while summer monsoons controlled deltaic evolution on centennial timescales.

Sign in / Sign up

Export Citation Format

Share Document