Simulating riverine nutrient transport on global scale

2020 ◽  
Author(s):  
Tobias Stacke ◽  
Stefan Hagemann ◽  
Gibran Romero-Mujalli ◽  
Jens Hartmann ◽  
Helmuth Thomas
Keyword(s):  
Land Surface ◽  
Large Scale ◽  
Climate Models ◽  
River Flow ◽  
Climate Change Impacts ◽  
Global Scale ◽  
Nutrient Loads ◽  
Input Dataset ◽  
Ocean Models ◽  
Energy And Momentum

<p>The currently ongoing CMIP6 simulations feature Earth System Models with interactively coupled components for atmosphere, ocean and land surface. Water, energy and momentum between these components are exchanged conservatively. This is crucial to compute climate interactions and their feedbacks consistently. Currently, the representation of biogeochemical cycles in land surface and ocean models is advancing including not only a carbon cycle but also processes based on nutrients like nitrogen or phosphorus. Some land surface models (LSM) already compute leaching of such constituents from the soil, and some ocean models (OM) consider nutrient influx from the land for a number of processes, e.g. biological activity. However, the OMs usually use observed data as input instead of the nutrient loads computed by the LSMs. This setup cannot represent the effects of climate or land use change on nutrient availability and therefore limits the applications of ESMs in respect to climate change impacts.</p><p>For this reason, we are extending our hydrological discharge model, the HDM, to not only transport water but also other constituents. The HDM is an established component of regional (GCOAST, ESM ROM, Reg-CM-ES) as well as global (MPI-ESM) climate models but also applicable as stand-alone model. In a first step, only inert transport is simulated without considering any chemical reactions or biological transformation during river flow. The transport is realized using the same linear cascade infrastructure as used for water transport. However, a successful offline validation of these new features does not only require a realistic routing scheme and consequently the representation of the most important reactions during transport, but also the generation of sensible input data either from large scale models or from observations. In our presentation, we will outline the state of this work together with the compiled input dataset.</p>

scholarly journals Cities Exacerbate Climate Warming

Urban Science ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 27
Author(s):  
Lahouari Bounoua ◽  
Kurtis Thome ◽  
Joseph Nigro
Keyword(s):  
Surface Temperature ◽  
Land Surface ◽  
Large Scale ◽  
Climate Models ◽  
Warming Trend ◽  
Climate Mitigation ◽  
Temperature Changes ◽  
Surface Warming ◽  
The Us

Urbanization is a complex land transformation not explicitly resolved within large-scale climate models. Long-term timeseries of high-resolution satellite data are essential to characterize urbanization within land surface models and to assess its contribution to surface temperature changes. The potential for additional surface warming from urbanization-induced land use change is investigated and decoupled from that due to change in climate over the continental US using a decadal timescale. We show that, aggregated over the US, the summer mean urban-induced surface temperature increased by 0.15 °C, with a warming of 0.24 °C in cities built in vegetated areas and a cooling of 0.25 °C in cities built in non-vegetated arid areas. This temperature change is comparable in magnitude to the 0.13 °C/decade global warming trend observed over the last 50 years caused by increased CO2. We also show that the effect of urban-induced change on surface temperature is felt above and beyond that of the CO2 effect. Our results suggest that climate mitigation policies must consider urbanization feedback to put a limit on the worldwide mean temperature increase.

scholarly journals Global Potato Yields Increase Under Climate Change With Adaptation and CO2 Fertilisation

2020 ◽  
Vol 4 ◽  
Author(s):  
Stewart A. Jennings ◽  
Ann-Kristin Koehler ◽  
Kathryn J. Nicklin ◽  
Chetan Deva ◽  
Steven M. Sait ◽  
...  
Keyword(s):  
Climate Change ◽  
Climate Models ◽  
Global Climate ◽  
Climate Change Impacts ◽  
Global Scale ◽  
Global Climate Models ◽  
Adaptation To Climate Change ◽  
National Scale ◽  
Modeling Studies ◽  
Potato Yields

The contribution of potatoes to the global food supply is increasing—consumption more than doubled in developing countries between 1960 and 2005. Understanding climate change impacts on global potato yields is therefore important for future food security. Analyses of climate change impacts on potato compared to other major crops are rare, especially at the global scale. Of two global gridded potato modeling studies published at the time of this analysis, one simulated the impacts of temperature increases on potential potato yields; the other did not simulate the impacts of farmer adaptation to climate change, which may offset negative climate change impacts on yield. These studies may therefore overestimate negative climate change impacts on yields as they do not simultaneously include CO2 fertilisation and adaptation to climate change. Here we simulate the abiotic impacts of climate change on potato to 2050 using the GLAM crop model and the ISI-MIP ensemble of global climate models. Simulations include adaptations to climate change through varying planting windows and varieties and CO2 fertilisation, unlike previous global potato modeling studies. Results show significant skill in reproducing observed national scale yields in Europe. Elsewhere, correlations are generally positive but low, primarily due to poor relationships between national scale observed yields and climate. Future climate simulations including adaptation to climate change through changing planting windows and crop varieties show that yields are expected to increase in most cases as a result of longer growing seasons and CO2 fertilisation. Average global yield increases range from 9 to 20% when including adaptation. The global average yield benefits of adaptation to climate change range from 10 to 17% across climate models. Potato agriculture is associated with lower green house gas emissions relative to other major crops and therefore can be seen as a climate smart option given projected yield increases with adaptation.

scholarly journals Influence of the representation of convection on the mid-Holocene West African Monsoon

2021 ◽  
Vol 17 (4) ◽  
pp. 1665-1684
Author(s):  
Leonore Jungandreas ◽  
Cathy Hohenegger ◽  
Martin Claussen
Keyword(s):  
Land Surface ◽  
Large Scale ◽  
Climate Models ◽  
Climate Model ◽  
Monsoon Season ◽  
West African Monsoon ◽  
West African ◽  
Global Climate Models ◽  
African Monsoon ◽  
Monsoonal Precipitation

Abstract. Global climate models experience difficulties in simulating the northward extension of the monsoonal precipitation over north Africa during the mid-Holocene as revealed by proxy data. A common feature of these models is that they usually operate on grids that are too coarse to explicitly resolve convection, but convection is the most essential mechanism leading to precipitation in the West African Monsoon region. Here, we investigate how the representation of tropical deep convection in the ICOsahedral Nonhydrostatic (ICON) climate model affects the meridional distribution of monsoonal precipitation during the mid-Holocene by comparing regional simulations of the summer monsoon season (July to September; JAS) with parameterized and explicitly resolved convection. In the explicitly resolved convection simulation, the more localized nature of precipitation and the absence of permanent light precipitation as compared to the parameterized convection simulation is closer to expectations. However, in the JAS mean, the parameterized convection simulation produces more precipitation and extends further north than the explicitly resolved convection simulation, especially between 12 and 17∘ N. The higher precipitation rates in the parameterized convection simulation are consistent with a stronger monsoonal circulation over land. Furthermore, the atmosphere in the parameterized convection simulation is less stably stratified and notably moister. The differences in atmospheric water vapor are the result of substantial differences in the probability distribution function of precipitation and its resulting interactions with the land surface. The parametrization of convection produces light and large-scale precipitation, keeping the soils moist and supporting the development of convection. In contrast, less frequent but locally intense precipitation events lead to high amounts of runoff in the explicitly resolved convection simulations. The stronger runoff inhibits the moistening of the soil during the monsoon season and limits the amount of water available to evaporation in the explicitly resolved convection simulation.

scholarly journals An evaluation of the importance of spatial resolution in a global climate and hydrological model based on the Rhine and Mississippi basin

2017 ◽  
Author(s):  
Imme Benedict ◽  
Chiel C. van Heerwaarden ◽  
Albrecht H. Weerts ◽  
Wilco Hazeleger
Keyword(s):  
High Resolution ◽  
Spatial Resolution ◽  
Large Scale ◽  
Climate Models ◽  
Hydrological Cycle ◽  
Global Climate ◽  
Global Scale ◽  
Global Climate Models ◽  
Convective Processes ◽  
Parameter Values

Abstract. The hydrological cycle of river basins can be simulated by combining global climate models (GCMs) and global hydrological models (GHMs). The spatial resolution of these models is restricted by computational resources and therefore limits the processes and level of detail that can be resolved. To further improve simulations of precipitation and river-runoff on a global scale, we assess and compare the benefits of an increased resolution for a GCM and a GHM. We focus on the Rhine and Mississippi basin. Increasing the resolution of a GCM (1.125° to 0.25°) results in more realistic large-scale circulation patterns over the Rhine and an improved precipitation budget. These improvements with increased resolution are not found for the Mississippi basin, most likely because precipitation is strongly dependent on the representation of still unresolved convective processes. Increasing the resolution of vegetation and orography in the high resolution GHM (from 0.5° to 0.05°) shows no significant differences in discharge for both basins, because the hydrological processes depend highly on other parameter values that are not readily available at high resolution. Therefore, increasing the resolution of the GCM provides the most straightforward route to better results. This route works best for basins driven by large-scale precipitation, such as the Rhine basin. For basins driven by convective processes, such as the Mississippi basin, improvements are expected with even higher resolution convection permitting models.

scholarly journals A high-resolution global dataset of topographic index values for use in large-scale hydrological modelling

2014 ◽  
Vol 11 (6) ◽  
pp. 6139-6166 ◽  
Author(s):  
T. R. Marthews ◽  
S. J. Dadson ◽  
B. Lehner ◽  
S. Abele ◽  
N. Gedney
Keyword(s):  
High Resolution ◽  
Land Surface ◽  
Large Scale ◽  
Global Scale ◽  
Surface Fluxes ◽  
Data Sets ◽  
Topographic Index ◽  
Surface Water Flow ◽  
Land Surface Water ◽  
Compound Topographic Index

Abstract. Modelling land surface water flow is of critical importance for simulating land-surface fluxes, predicting runoff and water table dynamics and for many other applications of Land Surface Models. Many approaches are based on the popular hydrology model TOPMODEL, and the most important parameter of this model is the well-knowntopographic index. Here we present new, high-resolution parameter maps of the topographic index for all ice-free land pixels calculated from hydrologically-conditioned HydroSHEDS data sets using the GA2 algorithm. At 15 arcsec resolution, these layers are 4× finer than the resolution of the previously best-available topographic index layers, the Compound Topographic Index of HYDRO1k (CTI). In terms of the largest river catchments occurring on each continent, we found that in comparison to our revised values, CTI values were up to 20% higher in e.g. the Amazon. We found the highest catchment means were for the Murray-Darling and Nelson-Saskatchewan rather than for the Amazon and St. Lawrence as found from the CTI. We believe these new index layers represent the most robust existing global-scale topographic index values and hope that they will be widely used in land surface modelling applications in the future.

scholarly journals Do land surface models need to include differential plant species responses to drought? Examining model predictions across a mesic-xeric gradient in Europe

2015 ◽  
Vol 12 (24) ◽  
pp. 7503-7518 ◽  
Author(s):  
M. G. De Kauwe ◽  
S.-X. Zhou ◽  
B. E. Medlyn ◽  
A. J. Pitman ◽  
Y.-P. Wang ◽  
...  
Keyword(s):  
Land Surface ◽  
Large Scale ◽  
Climate Models ◽  
Soil Water Potential ◽  
Abrupt Onset ◽  
Future Climate Change ◽  
Land Surface Models ◽  
Drought Sensitivity ◽  
Coupled Climate Models ◽  
Surface Models

Abstract. Future climate change has the potential to increase drought in many regions of the globe, making it essential that land surface models (LSMs) used in coupled climate models realistically capture the drought responses of vegetation. Recent data syntheses show that drought sensitivity varies considerably among plants from different climate zones, but state-of-the-art LSMs currently assume the same drought sensitivity for all vegetation. We tested whether variable drought sensitivities are needed to explain the observed large-scale patterns of drought impact on the carbon, water and energy fluxes. We implemented data-driven drought sensitivities in the Community Atmosphere Biosphere Land Exchange (CABLE) LSM and evaluated alternative sensitivities across a latitudinal gradient in Europe during the 2003 heatwave. The model predicted an overly abrupt onset of drought unless average soil water potential was calculated with dynamic weighting across soil layers. We found that high drought sensitivity at the most mesic sites, and low drought sensitivity at the most xeric sites, was necessary to accurately model responses during drought. Our results indicate that LSMs will over-estimate drought impacts in drier climates unless different sensitivity of vegetation to drought is taken into account.

scholarly journals TopoSUB: a tool for efficient large area numerical modelling in complex topography at sub-grid scales

2012 ◽  
Vol 5 (5) ◽  
pp. 1245-1257 ◽  
Author(s):  
J. Fiddes ◽  
S. Gruber
Keyword(s):  
Numerical Modelling ◽  
Land Surface ◽  
Large Scale ◽  
Climate Models ◽  
Global Climate ◽  
Distributed Model ◽  
Heterogeneous Environments ◽  
Mountain Regions ◽  
Large Area ◽  
Fine Grid

Abstract. Mountain regions are highly sensitive to global climate change. However, large scale assessments of mountain environments remain problematic due to the high resolution required of model grids to capture strong lateral variability. To alleviate this, tools are required to bridge the scale gap between gridded climate datasets (climate models and re-analyses) and mountain topography. We address this problem with a sub-grid method. It relies on sampling the most important aspects of land surface heterogeneity through a lumped scheme, allowing for the application of numerical land surface models (LSMs) over large areas in mountain regions or other heterogeneous environments. This is achieved by including the effect of mountain topography on these processes at the sub-grid scale using a multidimensional informed sampling procedure together with a 1-D lumped model that can be driven by gridded climate datasets. This paper provides a description of this sub-grid scheme, TopoSUB, and assesses its performance against a distributed model. We demonstrate the ability of TopoSUB to approximate results simulated by a distributed numerical LSM at around 104 less computations. These significant gains in computing resources allow for: (1) numerical modelling of processes at fine grid resolutions over large areas; (2) efficient statistical descriptions of sub-grid behaviour; (3) a "sub-grid aware" aggregation of simulated variables to coarse grids; and (4) freeing of resources for computationally intensive tasks, e.g., the treatment of uncertainty in the modelling process.

scholarly journals Terrestrial Aridity and Its Response to Greenhouse Warming across CMIP5 Climate Models

2015 ◽  
Vol 28 (14) ◽  
pp. 5583-5600 ◽  
Author(s):  
Jacob Scheff ◽  
Dargan M. W. Frierson
Keyword(s):  
Land Surface ◽  
Large Scale ◽  
Climate Models ◽  
Potential Evapotranspiration ◽  
Global Climate ◽  
Aridity Index ◽  
Global Climate Models ◽  
Greenhouse Warming ◽  
Dimensionless Ratio ◽  
The Tropics

Abstract The aridity of a terrestrial climate is often quantified using the dimensionless ratio of annual precipitation (P) to annual potential evapotranspiration (PET). In this study, the climatological patterns and greenhouse warming responses of terrestrial P, Penman–Monteith PET, and are compared among 16 modern global climate models. The large-scale climatological values and implied biome types often disagree widely among models, with large systematic differences from observational estimates. In addition, the PET climatologies often differ by several tens of percent when computed using monthly versus 3-hourly inputs. With greenhouse warming, land P does not systematically increase or decrease, except at high latitudes. Therefore, because of moderate, ubiquitous PET increases, decreases (drying) are much more widespread than increases (wetting) in the tropics, subtropics, and midlatitudes in most models, confirming and expanding on earlier findings. The PET increases are also somewhat sensitive to the time resolution of the inputs, although not as systematically as for the PET climatologies. The changes in the balance between P and PET are also quantified using an alternative aridity index, the ratio , which has a one-to-one but nonlinear correspondence with . It is argued that the magnitudes of changes are more uniformly relevant than the magnitudes of changes, which tend to be much higher in wetter regions. The ratio and its changes are also found to be excellent statistical predictors of the land surface evaporative fraction and its changes.

Satellite soil moisture improves rainfall just where needed

2020 ◽  
Author(s):  
Luca Brocca ◽  
Stefania Camici ◽  
Christian Massari ◽  
Luca Ciabatta ◽  
Paolo Filippucci ◽  
...  
Keyword(s):  
Soil Moisture ◽  
River Discharge ◽  
Large Scale ◽  
River Flow ◽  
Global Scale ◽  
Rain Gauge ◽  
Rainfall Runoff ◽  
Global Precipitation Climatology Centre ◽  
Satellite Rainfall ◽  
Global Precipitation

<p>Soil moisture is a fundamental variable in the water and energy cycle and its knowledge in many applications is crucial. In the last decade, some authors have proposed the use of satellite soil moisture for estimating and improving rainfall, doing hydrology backward. From this research idea, several studies have been published and currently preoperational satellite rainfall products exploiting satellite soil moisture products have been made available.</p><p>The assessment of such products on a global scale has revealed an important result, i.e., the soil moisture based products perform better than state of the art products exactly over regions in which the data are needed: Africa and South America. However, over these areas the assessment against rain gauge observations is problematic and independent approaches are needed to assess the quality of such products and their potential benefit in hydrological applications. On this basis, the use of the satellite rainfall products as input into rainfall-runoff models, and their indirect assessment through river discharge observations is an alternative and valuable approach for evaluating their quality.</p><p>For this study, a newly developed large scale dataset of river discharge observations over 500+ basins throughout Africa has been exploited. Based on such unique dataset, a large scale assessment of multiple near real time satellite rainfall products has been performed: (1) the Early Run version of the Integrated Multi-Satellite Retrievals for GPM (Global Precipitation Measurement), IMERG Early Run, (2) SM2RAIN-ASCAT (https://doi.org/10.5281/zenodo.3405563), and (3) GPM+SM2RAIN (http://doi.org/10.5281/zenodo.3345323). Additionally, gauge-based and reanalysis rainfall products have been considered, i.e., (4) the Global Precipitation Climatology Centre (GPCC), and (5) the latest European Centre for Medium-Range Weather Forecasts reanalysis, ERA5. As rainfall-runoff model, the semi-distributed MISDc (Modello Idrologico Semi-Distribuito in continuo) model has been employed in the period 2007-2018 at daily temporal scale.</p><p>First results over a part of the dataset reveal the great value of satellite soil moisture products in improving satellite rainfall estimates for river flow prediction in Africa. Such results highlight the need to exploit such products for operational systems in Africa addressed to the mitigation of the flood risk and water resources management.</p>

scholarly journals Development of a global dataset of Wetland Area and Dynamics for Methane Modeling (WAD2M)

2020 ◽  
Author(s):  
Zhen Zhang ◽  
Etienne Fluet-Chouinard ◽  
Katherine Jensen ◽  
Kyle McDonald ◽  
Gustaf Hugelius ◽  
...  
Keyword(s):  
Land Surface ◽  
Large Scale ◽  
Southern Oscillation ◽  
Microwave Remote Sensing ◽  
Global Scale ◽  
Annual Maximum ◽  
Time Step ◽  
Wetland Area ◽  
Wetland Extent

Abstract. Seasonal and interannual variations in global wetland area is a strong driver of fluctuations in global methane (CH4) emissions. Current maps of global wetland extent vary with wetland definition, causing substantial disagreement and large uncertainty in estimates of wetland methane emissions. To reconcile these differences for large-scale wetland CH4 modeling, we developed a global Wetland Area and Dynamics for Methane Modeling (WAD2M) dataset at ~25 km resolution at equator (0.25 arc-degree) at monthly time-step for 2000–2018. WAD2M combines a time series of surface inundation based on active and passive microwave remote sensing at coarse resolution (~25 km) with six static datasets that discriminate inland waters, agriculture, shoreline, and non-inundated wetlands. We exclude all permanent water bodies (e.g. lakes, ponds, rivers, and reservoirs), coastal wetlands (e.g., mangroves and sea grasses), and rice paddies to only represent spatiotemporal patterns of inundated and non-inundated vegetated wetlands. Globally, WAD2M estimates the long-term maximum wetland area at 13.0 million km2 (Mkm2), which can be separated into three categories: mean annual minimum of inundated and non-inundated wetlands at 3.5 Mkm2, seasonally inundated wetlands at 4.0 Mkm2 (mean annual maximum minus mean annual minimum), and intermittently inundated wetlands at 5.5 Mkm2 (long-term maximum minus mean annual maximum). WAD2M has good spatial agreements with independent wetland inventories for major wetland complexes, i.e., the Amazon Lowland Basin and West Siberian Lowlands, with high Cohen's kappa coefficient of 0.54 and 0.70 respectively among multiple wetlands products. By evaluating the temporal variation of WAD2M against modeled prognostic inundation (i.e., TOPMODEL) and satellite observations of inundation and soil moisture, we show that it adequately represents interannual variation as well as the effect of El Niño-Southern Oscillation on global wetland extent. This wetland extent dataset will improve estimates of wetland CH4 fluxes for global-scale land surface modeling. The dataset can be found at http://doi.org/10.5281/zenodo.3998454 (Zhang et al., 2020).

Sign in / Sign up

Export Citation Format

Share Document