Meandering channels over ice: Cooler and unique?

2021 ◽  
Author(s):  
Roberto Fernández
Keyword(s):  
Cross Section ◽  
Experimental Work ◽  
Small Scale ◽  
Field Observations ◽  
Meandering Channels ◽  
Ongoing Work ◽  
Similarities And Differences ◽  
Coefficient Of Skewness ◽  
Cross Section Geometry

<p>Experimental work on small-scale meltwater meandering channels over ice and field observations have identified similarities and differences between their planform morphologies and those of meandering channels in other media (e.g. alluvial, bedrock). Qualitatively and quantitatively, planform characteristics, including sinuosity, wavelength-to-width ratios, coefficient of skewness and fatness, suggest that most meandering channels behave in certain ways and within certain ranges. However, what makes meltwater meandering channels over ice unique? In this contribution, I highlight the different aspects that set meltwater meandering channels over ice apart from meandering channels in other media and share ongoing work focusing in their planform morphologies, curvature signals, and cross section geometry.</p>

Automated 3D measurement of fiber cross section morphology in handsheets

2012 ◽  
Vol 27 (2) ◽  
pp. 264-269 ◽  
Author(s):  
Christian Lorbach ◽  
Ulrich Hirn ◽  
Johannes Kritzinger ◽  
Wolfgang Bauer
Keyword(s):  
Image Analysis ◽  
Cross Section ◽  
Cross Sections ◽  
Image Plane ◽  
3D Measurement ◽  
Cross Sectional ◽  
Fiber Cross Section ◽  
Fiber Wall ◽  
Sectional Shape ◽  
Cross Section Geometry

Abstract We present a method for 3D measurement of fiber cross sectional morphology from handsheets. An automated procedure is used to acquire 3D datasets of fiber cross sectional images using an automated microtome and light microscopy. The fiber cross section geometry is extracted using digital image analysis. Simple sample preparation and highly automated image acquisition and image analysis are providing an efficient tool to analyze large samples. It is demonstrated that if fibers are tilted towards the image plane the images of fiber cross sections are always larger than the true fiber cross section geometry. In our analysis the tilting angles of the fibers to the image plane are measured. The resulting fiber cross sectional images are distorted to compensate the error due to fiber tilt, restoring the true fiber cross sectional shape. We use an approximated correction, the paper provides error estimates of the approximation. Measurement results for fiber wall thickness, fiber coarseness and fiber collapse are presented for one hardwood and one softwood pulp.

scholarly journals Non-Invasive Technical Investigation of English Portrait Miniatures Attributed to Nicholas Hilliard and Isaac Oliver

Heritage ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 1165-1181
Author(s):  
Flavia Fiorillo ◽  
Lucia Burgio ◽  
Christine Slottved Kimbriel ◽  
Paola Ricciardi
Keyword(s):  
Fluorescence Spectroscopy ◽  
Scientific Methodology ◽  
Small Scale ◽  
Artistic Practice ◽  
X Ray ◽  
Non Invasive ◽  
Miniature Painting ◽  
Entire Career ◽  
Similarities And Differences ◽  
Victoria And Albert Museum

This study presents the results of the technical investigation carried out on several English portrait miniatures painted in the 16th and 17th century by Nicholas Hilliard and Isaac Oliver, two of the most famous limners working at the Tudor and Stuart courts. The 23 objects chosen for the analysis, spanning almost the entire career of the two artists, belong to the collections of the Victoria and Albert Museum (London) and the Fitzwilliam Museum (Cambridge). A non-invasive scientific methodology, comprising of stereo and optical microscopies, Raman microscopy, and X-ray fluorescence spectroscopy, was required for the investigation of these small-scale and fragile objects. The palettes and working techniques of the two artists were characterised, focusing in particular on the examination of flesh tones, mouths, and eyes. These findings were also compared to the information written in the treatises on miniature painting circulating during the artists’ lifetime. By identifying the materials and techniques most widely employed by the two artists, this study provides information about similarities and differences in their working methods, which can help to understand their artistic practice as well as contribute to matters of attribution.

scholarly journals MMS Multipoint electric field observations of small-scale magnetic holes

2016 ◽  
Vol 43 (12) ◽  
pp. 5953-5959 ◽  
Author(s):  
Katherine A. Goodrich ◽  
Robert E. Ergun ◽  
Frederick D. Wilder ◽  
James Burch ◽  
Roy Torbert ◽  
...  
Keyword(s):  
Electric Field ◽  
Small Scale ◽  
Field Observations

scholarly journals Mechanical Properties of Spruce Wood Extracted from GLT Beams Loaded by Fire

2021 ◽  
Vol 13 (10) ◽  
pp. 5494
Author(s):  
Lucie Kucíková ◽  
Michal Šejnoha ◽  
Tomáš Janda ◽  
Jan Sýkora ◽  
Pavel Padevět ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
High Temperature ◽  
Cross Section ◽  
Negative Impact ◽  
Tensile Tests ◽  
Thermal Recovery ◽  
Bending Test ◽  
Small Scale ◽  
Spruce Wood ◽  
The Impact

Heating wood to high temperature changes either temporarily or permanently its physical properties. This issue is addressed in the present contribution by examining the effect of high temperature on residual mechanical properties of spruce wood, grounding on the results of full-scale fire tests performed on GLT beams. Given these tests, a computational model was developed to provide through-thickness temperature profiles allowing for the estimation of a charring depth on the one hand and on the other hand assigning a particular temperature to each specimen used subsequently in small-scale tensile tests. The measured Young’s moduli and tensile strengths were accompanied by the results from three-point bending test carried out on two groups of beams exposed to fire of a variable duration and differing in the width of the cross-section, b=100 mm (Group 1) and b=160 mm (Group 2). As expected, increasing the fire duration and reducing the initial beam cross-section reduces the residual bending strength. A negative impact of high temperature on residual strength has also been observed from simple tensile tests, although limited to a very narrow layer adjacent to the charring front not even exceeding a typically adopted value of the zero-strength layer d0=7 mm. On the contrary, the impact on stiffness is relatively mild supporting the thermal recovery property of wood.

Controlling the dynamic behavior of piezoceramic cylinders by cross-section geometry

2012 ◽  
Vol 223 (6) ◽  
pp. 1119-1136 ◽  
Author(s):  
Jan Awrejcewicz ◽  
Valeriy Storozhev ◽  
Vladimir Puzyrev
Keyword(s):  
Dynamic Behavior ◽  
Cross Section ◽  
Cross Section Geometry

Piezoelectric T-Beam Microactuators

2008 ◽  
Author(s):  
Hareesh K. R. Kommepalli ◽  
Andrew D. Hirsh ◽  
Christopher D. Rahn ◽  
Srinivas A. Tadigadapa
Keyword(s):  
Cross Section ◽  
Fabrication Process ◽  
Mems Fabrication ◽  
Out Of Plane ◽  
Cantilevered Beam ◽  
Piezoelectric Mems ◽  
The Cross ◽  
T Beam ◽  
Cross Section Geometry

This paper introduces a novel T-beam actuator fabricated by a piezoelectric MEMS fabrication process. ICP-RIE etching from the front and back of a bulk PZT chip is used to produce stair stepped structures through the thickness with complex inplane shapes. Masked electrode deposition creates active and passive regions in the PZT structure. With a T-shaped crosssection, and bottom and top flange and web electrodes, a cantilevered beam can bend in-plane and out-of-plane with bimorph actuation in both directions. One of these T-beam actuators is fabricated and experimentally tested. An experimentally validated model predicts that the cross-section geometry can be optimized to produce higher displacement and blocking force.

Using bedrock thermochronometer systems to constrain fold-thrust belt geometry and kinematics, insight from the eastern Himalayas, Arunachal Pradesh, India.

2021 ◽  
Author(s):  
Nadine McQuarrie ◽  
Mary Braza
Keyword(s):  
Cross Section ◽  
Cross Sections ◽  
Hanging Wall ◽  
Vertical Component ◽  
Eastern Himalaya ◽  
Thrust Belt ◽  
Arunachal Pradesh ◽  
Eastern Himalayas ◽  
Cross Section Geometry ◽  
Geometry And Kinematics

<div> <p>One of the first order questions regarding a cross-section representation through a fold-thrust belt (FTB) is usually “how unique is this geometrical interpretation of the subsurface?”  The proposed geometry influences perceptions of inherited structures, decollement horizons, and both rheological and kinematic behavior.  Balanced cross sections were developed as a tool to produce more accurate and thus more predictive geological cross sections.  While balanced cross sections provide models of subsurface geometry that can reproduce the mapped surface geology, they are non-unique, opening the possibility that different geometries and kinematics may be able to satisfy the same set of observations. The most non-unique aspects of cross sections are: (1) the geometry of structures that is not seen at the surface, and (2) the sequence of thrust faulting.  We posit that integrating sequentially restored cross sections with thermokinematic models that calculate the resulting subsurface thermal field and predicted cooling ages of rocks at the surface provides a valuable means to assess the viability of proposed geometry and kinematics.  Mineral cooling ages in compressional settings are the outcome of surface uplift and the resulting focused erosion.  As such they are most sensitive to the vertical component of the kinematic field imparted by ramps and surface breaking faults in sequential reconstructions of FTB.  Because balanced cross sections require that the lengths and locations of hanging-wall and footwall ramps match, they provide a template of the ways in which the location and magnitude of ramps in the basal décollement have evolved with time.  Arunachal Pradesh in the eastern Himalayas is an ideal place to look at the sensitivity of cooling ages to different cross section geometries and kinematic models. Recent studies from this portion of the Himalayan FTB include both a suite of different cross section geometries and a robust bedrock thermochronology dataset. The multiple published cross-sections differ in the details of geometry, implied amounts of shortening, kinematic history, and thus exhumation pathways. Published cooling ages data show older ages (6-10 Ma AFT, 12-14 Ma ZFT) in the frontal portions of the FTB and significantly younger ages (2-5 Ma AFT, 6-8 Ma ZFT) in the hinterland. These ages are best reproduced with kinematic sequence that involves early forward propagation of the FTB from 14-10 Ma.  The early propagation combined with young hinterland cooling ages require several periods of out-of-sequence faulting. Out-of-sequence faults are concentrated in two windows of time (10-8 Ma and 7-5 Ma) that show systematic northward reactivation of faults.  Quantitative integration of cross section geometry, kinematics and cooling ages require notably more complicated kinematic and exhumation pathways than are typically assumed with a simple in-sequence model of cross section deformation.  While also non-unique, the updated cross section geometry and kinematics highlight components of geometry, deformation and exhumation that must be included in any valid cross section model for this portion of the eastern Himalaya.</p> </div>

Non-Linear Stress Analysis of Complex Umbilical Cross-Sections

2002 ◽  
Author(s):  
Svein Sævik ◽  
Knut I. Ekeberg
Keyword(s):  
Cross Section ◽  
Axial Force ◽  
Plastic Material ◽  
Axial Strain ◽  
Development Program ◽  
Full Scale ◽  
Small Scale ◽  
Applied Theory ◽  
Element Formulation ◽  
Material Models

Nexans Norway is, together with Marintek, currently developing a software for detailed analysis of complex umbilical cross-section designs. The software development project combines numerical methods with small-scale testing of involved materials, as well as full-scale testing of a wide variety of umbilical designs, essential for calibration and verification purposes. Each umbilical design is modelled and comparisons are made with respect to global behaviour in terms of: • Axial strain versus axial force; • Axial strain versus torsion; • Torsion versus torsion moment for various axial force levels; • Moment versus curvature for different tension levels. The applied theory is based on curved beam and curved axisymmetric thin shell theories. The problem is formulated in terms of finite elements applying the Principle of Virtual Displacements. Each body of the cross-section interacts with the other bodies by contact elements which are formulated by a penalty formulation. The contact elements operate in the local surface coordinate system and include eccentricity, surface stiffness and friction effects. The software is designed to include the following functionality: • Arbitrary geometry modelling including helical elements wound into arbitrary order; • The helical elements may include both tubes and filled bodies; • Elastic, hyper-elastic, and elastic-plastic material models; • Initial strain; • Contact elements, including friction; • Tension, torsion, internal pressure, external pressure, bending and external contact loading (caterpillars, tensioners, etc.). The paper focuses on the motivation behind the development program including a description of the different activities. The theory is described in terms of kinematics, material models and finite element formulation. A test example is further presented comparing predicted behaviour with respect to full-scale test results.

Large Area DPB Free (111) β-SiC Thick Layer Grown on (0001) α-SiC Nominal Surfaces by the CF-PVT Method

2005 ◽  
Vol 483-485 ◽  
pp. 225-228 ◽  
Author(s):  
Didier Chaussende ◽  
Laurence Latu-Romain ◽  
Laurent Auvray ◽  
M. Ucar ◽  
Michel Pons ◽  
...  
Keyword(s):  
Growth Rate ◽  
Optical Microscopy ◽  
Cross Section ◽  
Thick Layer ◽  
Vapour Transport ◽  
Large Area ◽  
Continuous Feed ◽  
Heating Up ◽  
Cross Section Geometry ◽  
Selection Of

Thick (111) oriented β-SiC layers have been grown by hetero-epitaxy on a (0001) a-SiC substrate with the Continuous Feed-Physical Vapour Transport (CF-PVT) method. The growth rate was 68 µm/h at a pressure of 2 torr and a temperature of 1950°C. The nucleation step of the β-SiC layer during the heating up of the process was studied in order to manage first the a to b heteropolytypic transition and second the selection of the b-SiC orientation. With a adapted seeding stage, we grew a 0.4mm thick layer almost free of Double Positioning Boundaries on a 30mm diameter sample. First observations of the layer by cross-polarised optical Microscopy are presented both in planar view and in cross section geometry.

Sign in / Sign up

Export Citation Format

Share Document