Tracing Ti-rich titanomagnetite oxidation with low-temperature magnetic measurements

Author(s):  
Andrei Kosterov ◽  
Leonid Surovitskii ◽  
Valerii Maksimochkin ◽  
Svetlana Yanson ◽  
Aleksey Smirnov

<p>Ti-rich titanomagnetite is a primary magnetic mineral in submarine basalts, as well as in some terrestrial volcanic rocks. On geological timescale, it undergoes a slow oxidation forming titanomaghemites. This natural process may be modeled to some extent by a prolonged annealing at moderately elevated temperatures. We test this by treating at 355°C for 4, 40, 110, and 375 hours a sample of submarine basalt containing titanomagnetite of approximate TM46 composition with Curie temperature of 205°C. To characterize the oxidation products emerged during annealing, we have carried out magnetic measurements between at cryogenic temperatures between 1.8 K and 300 K and at high temperatures up to 700°C.</p><p>Temperature dependences of magnetic susceptibility measured in an argon atmosphere reveal that annealing for 4 hours already leads to the formation of new magnetic phases (Phases 1 and 2 thereafter) with Curie temperatures of 420°C and 590°C, respectively. At the same time, a phase close to the initial titanomagnetite still remains in a noticeable amount, although its Curie point also shifts towards higher temperatures. Upon further annealing, the initial titanomagnetite completely disappears, the Curie temperature of Phase 1 increases, reaching 500°C after 375 hours, and the Curie temperature of Phase 2 remains practically unchanged. Phase 1 appears unstable to heating to 700°C in argon atmosphere. In samples annealed for up to 110 hours, Phase 1 disappears on cooling, and a phase with the same Curie temperature as the initial titanomagnetite reemerges. In the sample annealed for 375 hours, traces of Phase 1 are still visible in the cooling branch of the susceptibility vs. temperature curve, and the Curie temperature of the reemerged initial-like phase is 250°C. The newly formed Phase 2 remains stable when heated to 700°C in argon.</p><p>Effect of prolonged annealings is clearly seen in low-temperature magnetic properties. In the fresh sample, about one quarter of magnetization acquired at 1.8 K is demagnetized by 5 K. This feature holds for the annealed samples as well. The titanomagnetite phase in the fresh sample manifests itself in a magnetic transition at 58 K. Below this temperature, the FC and ZFC curves sharply diverge, as previously observed for titanomagnetites of intermediate composition. For the annealed samples, the shape of ZFC and FC curves and the ratio between them remain generally similar to those observed for the fresh sample, but there are also several differences. The magnetic transition temperature shifts to ~45 K, while the curves’ shape above the transition changes from concave-up to concave-down. RT-SIRM cycle to 1.8 K in zero field for the fresh sample has a characteristic convex shape and is almost reversible. Magnetization at 1.8 K is about 20% higher than the initial value at 300 K, and magnetization loss after the cycle is only 2-3%. The shape of RT-SIRM cycles changes progressively with increasing annealing time, the degree of irreversibility increasing to ~30% for the sample annealed for 375 hours. </p><p>This study is supported by Russian Foundation of the Basic Research, grants 19-05-00471 and 20-05-00573.</p>

2010 ◽  
Vol 660-661 ◽  
pp. 267-272
Author(s):  
J.C.R. Muniz ◽  
M.C.A. Silva ◽  
Claudemiro Bolfarini ◽  
M.D.C. Sobral

Fe-6.5%Si alloy spray formed has the Curie temperature variation measured as a function of the parameters process. In this work the magnetic transition temperature was obtained by Differential Scanning Calorimeter although it can be also gotten by Vibration Samples Magnetometer. The process parameters controlled were gas pressure (P), tube diameter (T) and fly height (H) and the properties analyzed were coercive force, maximum permeability, power loss and Curie temperature. The chemical composition was determined using the Curie temperature. The microstructure of deposits was observed in different conditions of light microscopy, bright field, polarized light and dark field, and the grain size was measured according to ASTM 112-95. The process parameters combination P5T6H360 has produced the minimum power loss of 2.26 W/kg and maximum permeability of 9,000. The Curie temperature measured was 683°C, which indicates a Si content of 6.5wt%.


Author(s):  
Jose Higino Dias Filho ◽  
Jorge Luis López Aguilar ◽  
Adriana Silva De Albuquerque ◽  
Renato Dourado Maia ◽  
Wesley De Oliveira Barbosa ◽  
...  

Nanocrystalline NiFe2O4 particles prepared by chemical co-precipitation method were studied using magnetic measurements, 57Fe Mössbauer spectroscopy, X-ray diffraction, and transmission electron microscopy. Fits to Mössbauer spectra, in the range of 4.2 K – 300 K, were done using spin hamiltonians to describe both the electronic and nuclear interactions, a model of superparamagnetic relaxation of two levels (spin ½) and stochastic theory, a log-normal particle size distribution function as well as a dependency of the magnetic transition temperature and the anisotropy constant on particle diameter. We have used evolutionary strategies to fit the more complex Mössbauer spectra line shapes. The nanoparticles have an average size of 7 nm and exhibit superparamagnetism at room temperature. The saturation magnetization (Ms) at 4.2 K was determined from M vs. 1/H plots by extrapolating the value of magnetizations to infinite fields, to 24.21 emu/g and coercivity to 3.15 kOe. A magnetic anisotropy energy constant (K) 1.9´105 J/m3, at 4.2 K, were calculated from magnetization measurements. The synthesis, characterization, and functionalization of magnetic nanoparticles is a highly active area of current research located at the interface between materials science, biotechnology, and medicine. Superparamagnetic iron oxides nanoparticles have unique physical properties and have emerged as a new class of diagnostic probes for multimodal tracking and as contrast agents for magnetic resonance imaging (MRI).


2001 ◽  
Vol 674 ◽  
Author(s):  
Ting-Sheng Huang ◽  
Chiung-Hsiung Chen ◽  
Ming-Fong Tai

ABSTRACTThe magnetic critical behaviors in the perovskite-like (La1−xPbx)MnO3 series with x = 0.0 ∼ 0.5 are studied by means of dc magnetic measurements. All the samples crystallize in the rhombohedral unit cell with a C R 3 space group (a 0.54 nm and c 1.33 nm). The detailed crystallographic parameters of all the samples are obtained by the refinements of the powder x-ray diffraction data using the Rietveld method. The substitution effect of Pb2+ ions on La3+ sites induces a mixed-valence state of Mn3+/Mn4+ and enhances magnetic transition temperature in the (La1−xPbx)MnO3 system. The transition temperature TC increases with the Pb content from 225 K as x = 0 to 355 K as x = 0.5. The canonical spin-glass behaviors in low fields and the scaling behaviors of magnetic physical quantities are clearly observed in all our samples. The values of the related critical exponents and the scaling functions of magnetic data are close to those of the conventional spin glass systems.


2011 ◽  
Vol 170 ◽  
pp. 109-113 ◽  
Author(s):  
Anna Bajorek ◽  
Grażyna Chełkowska ◽  
Artur Chrobak ◽  
Marzena Kwiecień-Grudziecka

The paper presents selected magnetic properties of the Gd1-xTbxNi3 intermetallic compounds. Based on the wide-ranging SQUID magnetometer (Quantum Design MPMS, temperature from 1.9K to 300K and magnetic field up to 7T) series of different magnetic measurements were carried out. In studied system the saturation magnetization and the Curie temperature strongly depends of Tb concentration. Moreover, the so-called field cooling - zero field cooling (FC-ZFC) curves reveal a dependence of M(T) on the applied magnetic field. The thermomagnetic curves indicate interesting behaviour which is typical for terbium compounds and can be ascribed to the interaction between different aligned magnetic subblattices.


2021 ◽  
Vol 8 ◽  
Author(s):  
Masahiro Sakuda ◽  
Hiroyasu Yamahara ◽  
Hitoshi Tabata ◽  
Munetoshi Seki

Thin films of BaFe1-xMxO3 (M = Hf, Zr, and Ce; 0.0 ≤ x ≤ 0.75) were fabricated using pulsed laser deposition and their magnetic properties were investigated. X-ray diffraction analysis indicated that oxygen-deficient BaFeOx (x < 3.0) with a monoclinic structure was formed when the deposition was conducted using a non-substituted target (x = 0.0). The as-grown BaFeOx films were converted into fully oxidized BaFeO3 with a perovskite structure by low-temperature oxidation in an ozone atmosphere. In contrast, the as-deposited films of Hf, Zr, and Ce-substituted films exhibited a perovskite structure, and their crystallinity did not change after low-temperature ozone annealing. The magnetic transition temperature Tc of the BaFeO3 film was 115 K, whereas the substituted BaFeO3 films showed ferromagnetic behavior even at 300 K. These results can be attributed to the weakening of the antiferromagnetic super-exchange coupling among Fe ions owing to the lattice expansion in the substituted BaFeO3. In addition, the magnetization of the films was found to increase with the decreasing ionic ratio of Fe4+/Fe3+, suggesting that the inherent carrier-induced ferromagnetic interaction is dominant in the films.


2009 ◽  
Vol 74 ◽  
pp. 215-218 ◽  
Author(s):  
R.V.S. Prasad ◽  
M. Manivel Raja ◽  
G. Phanikumar

This study reports detailed microstructural and magnetic characterization of rapidly solidified Ni2(Mn,Fe)Ga heusler alloys processed using the melt spinning technique. Series of Ni50Mn(25-x)Fe(x= 2, 5, 8, 11)Ga25 alloys were prepared by vacuum arc melting and then melt spun at constant wheel speed of 20 m/sec to obtain samples in the form of ribbons. X-ray diffraction analysis of as-cast Ni2(Mn,Fe)Ga alloy with different ‘Fe’ concentrations revealed austenite phase with L21 Heusler atomic order at room temperature. Transmission electron microscopy of melt spun ribbons reveals a precursor tweed structures due to magnetic tweed contrast when the ‘Fe’ concentrations are 8% and 11%. In case of 11% ‘Fe’ substituted alloy martensite phase was found to from at the grain boundary triple junctions. Thermo magnetic measurements determine that, as the ‘Fe’ concentration increases from 2 to 11%; it enhances the magnetic transition temperature from 375 to 403 K.


2013 ◽  
Vol 650 ◽  
pp. 264-267 ◽  
Author(s):  
Wen Jiang Feng ◽  
Hao Hua Zhang ◽  
Yan He

The Co-doped Co0.2Mn1.7Sn compound was prepared by melting appropriate metals with purity higher than 99.9% in a magneto-controlled arc furnace. The compound shows single-phase characteristics. Magnetic measurements show that, the abnormal negative magnetization, i.e. diamagnetism occurs at low temperature. Moreover, it displays the common weak ferromagnetism, together with some spin-glass-like behavior. Besides, we conjure that abnormal negative magnetization should be from the magnetized sample when cooling the compound in the so-called zero field (in fact it is about 2.5×10-5 T).


2001 ◽  
Vol 60 (4) ◽  
pp. 215-230 ◽  
Author(s):  
Jean-Léon Beauvois

After having been told they were free to accept or refuse, pupils aged 6–7 and 10–11 (tested individually) were led to agree to taste a soup that looked disgusting (phase 1: initial counter-motivational obligation). Before tasting the soup, they had to state what they thought about it. A week later, they were asked whether they wanted to try out some new needles that had supposedly been invented to make vaccinations less painful. Agreement or refusal to try was noted, along with the size of the needle chosen in case of agreement (phase 2: act generalization). The main findings included (1) a strong dissonance reduction effect in phase 1, especially for the younger children (rationalization), (2) a generalization effect in phase 2 (foot-in-the-door effect), and (3) a facilitatory effect on generalization of internal causal explanations about the initial agreement. The results are discussed in relation to the distinction between rationalization and internalization.


2013 ◽  
Vol 5 (1) ◽  
Author(s):  
Abdul Hasan Saragih

This classroom research was conducted on the autocad instructions to the first grade of mechinary class of SMK Negeri 1 Stabat aiming at : (1) improving the student’ archievementon autocad instructional to the student of mechinary architecture class of SMK Negeri 1 Stabat, (2) applying Quantum Learning Model to the students of mechinary class of SMK Negeri 1 Stabat, arising the positive response to autocad subject by applying Quantum Learning Model of the students of mechinary class of SMK Negeri 1 Stabat. The result shows that (1) by applying quantum learning model, the students’ achievement improves significantly. The improvement ofthe achievement of the 34 students is very satisfactory; on the first phase, 27 students passed (70.59%), 10 students failed (29.41%). On the second phase 27 students (79.41%) passed and 7 students (20.59%) failed. On the third phase 30 students (88.24%) passed and 4 students (11.76%) failed. The application of quantum learning model in SMK Negeri 1 Stabat proved satisfying. This was visible from the activeness of the students from phase 1 to 3. The activeness average of the students was 74.31% on phase 1,81.35% on phase 2, and 83.63% on phase 3. (3) The application of the quantum learning model on teaching autocad was very positively welcome by the students of mechinary class of SMK Negeri 1 Stabat. On phase 1 the improvement was 81.53% . It improved to 86.15% on phase 3. Therefore, The improvement ofstudent’ response can be categorized good.


Sign in / Sign up

Export Citation Format

Share Document