Factors Impacting Performance of the NDSI-Based Operational Snow Cover Monitoring Algorithm in Forested Landscapes

Author(s):  
Arnab Muhuri ◽  
Simon Gascoin ◽  
Lucas Menzel ◽  
Tihomir S. Kostadinov ◽  
Adrian A. Harpold ◽  
...  

<p>In cold regions of the world with significant forest cover, a notable volume of precipitated snow resides under the forest cover. In such regions, snow is an abundant and valuable natural resource and assessing the winter extent of snow precipitation is particularly important for forecasting hydroelectric power potential, managing forests for maximizing the spring snowmelt yield, and monitoring animal habitats.</p><p>Forest presents challenging scenarios by obscuring much of the underlying snow over the forest floor from the view of the imaging spaceborne sensors. Moreover, due to the prevalence of mixed pixels, particularly in the forested landscapes, merely binarizing pixels into snow/snow-free can introduce errors while integrating the snow-covered area (SCA) information for hydro-climatological modeling. Therefore, the fractional snow-covered area (fSCA), which is a finer representation of the binary SCA and defines the snow-covered fraction of the pixel area, is a more reliable indicator. </p><p>The recently launched High Resolution Snow & Ice (HRSI) monitoring service by Copernicus allows exploitation of the high-resolution Sentinel-2 data by facilitating free distribution of NDSI-based operational snow cover maps. It also offers the feasibility to estimate the fractional snow cover (FSC) without the requirement of any end-member spectra. In this investigation, we assessed the performance of the NDSI-based operational snow cover area (SCA) monitoring algorithm and the associated FSC with respect to factors influencing the algorithm's performance. The investigation focused over test sites located in the northern Sierra Nevada mountain range in California, US and the central Spanish Pyrenees. The analyses indicated that terrestrial characteristics like tree cover density (TCD) and meteorological factors like incoming solar irradiance impacts the performance of the optical satellite-based snow cover monitoring algorithms. A strong dependence of the algorithm's performance on TCD (negatively correlated) and solar irradiance (positively correlated) was observed.</p>

1987 ◽  
Vol 9 ◽  
pp. 39-44 ◽  
Author(s):  
A.T.C. Chang ◽  
J.L. Foster ◽  
D.K. Hall

Snow covers about 40 million km2of the land area of the Northern Hemisphere during the winter season. The accumulation and depletion of snow is dynamically coupled with global hydrological and climatological processes. Snow covered area and snow water equivalent are two essential measurements. Snow cover maps are produced routinely by the National Environmental Satellite Data and Information Service of the National Oceanic and Atmospheric Administration (NOAA/NESDIS) and by the US Air Force Global Weather Center (USAFGWC). The snow covered area reported by these two groups sometimes differs by several million km2, Preliminary analysis is performed to evaluate the accuracy of these products.Microwave radiation penetrating through clouds and snowpacks could provide depth and water equivalent information about snow fields. Based on theoretical calculations, snow covered area and snow water equivalent retrieval algorithms have been developed. Snow cover maps for the Northern Hemisphere have been derived from Nimbus-7 SMMR data for a period of six years (1978–1984). Intercomparisons of SMMR, NOAA/NESDIS and USAFGWC snow maps have been conducted to evaluate and assess the accuracy of SMMR derived snow maps. The total snow covered area derived from SMMR is usually about 10% less than the other two products. This is because passive microwave sensors cannot detect shallow, dry snow which is less than 5 cm in depth. The major geographic regions in which the differences among these three products are the greatest are in central Asia and western China. Future study is required to determine the absolute accuracy of each product.Preliminary snow water equivalent maps have also been produced. Comparisons are made between retrieved snow water equivalent over large area and available snow depth measurements. The results of the comparisons are good for uniform snow covered areas, such as the Canadian high plains and the Russian steppes. Heavily forested and mountainous areas tend to mask out the microwave snow signatures and thus comparisons with measured water equivalent are poorer in those areas.


1987 ◽  
Vol 9 ◽  
pp. 39-44 ◽  
Author(s):  
A.T.C. Chang ◽  
J.L. Foster ◽  
D.K. Hall

Snow covers about 40 million km2 of the land area of the Northern Hemisphere during the winter season. The accumulation and depletion of snow is dynamically coupled with global hydrological and climatological processes. Snow covered area and snow water equivalent are two essential measurements. Snow cover maps are produced routinely by the National Environmental Satellite Data and Information Service of the National Oceanic and Atmospheric Administration (NOAA/NESDIS) and by the US Air Force Global Weather Center (USAFGWC). The snow covered area reported by these two groups sometimes differs by several million km2, Preliminary analysis is performed to evaluate the accuracy of these products.Microwave radiation penetrating through clouds and snowpacks could provide depth and water equivalent information about snow fields. Based on theoretical calculations, snow covered area and snow water equivalent retrieval algorithms have been developed. Snow cover maps for the Northern Hemisphere have been derived from Nimbus-7 SMMR data for a period of six years (1978–1984). Intercomparisons of SMMR, NOAA/NESDIS and USAFGWC snow maps have been conducted to evaluate and assess the accuracy of SMMR derived snow maps. The total snow covered area derived from SMMR is usually about 10% less than the other two products. This is because passive microwave sensors cannot detect shallow, dry snow which is less than 5 cm in depth. The major geographic regions in which the differences among these three products are the greatest are in central Asia and western China. Future study is required to determine the absolute accuracy of each product.Preliminary snow water equivalent maps have also been produced. Comparisons are made between retrieved snow water equivalent over large area and available snow depth measurements. The results of the comparisons are good for uniform snow covered areas, such as the Canadian high plains and the Russian steppes. Heavily forested and mountainous areas tend to mask out the microwave snow signatures and thus comparisons with measured water equivalent are poorer in those areas.


1983 ◽  
Vol 14 (5) ◽  
pp. 257-266 ◽  
Author(s):  
B. Dey ◽  
D. C. Goswami ◽  
A. Rango

The results presented in this study indicate the possibility of seasonal runoff prediction when satellite-derived basin snow-cover data are related to point source river discharge data for a number of years. NOAA-VHRR satellite images have been used to delineate the areal extent of snow cover for early April over the Indus and Kabul River basins in Pakistan. Simple photo-interpretation techniques, using a zoom transfer scope, were employed in transferring satellite snow-cover boundaries onto base map overlays. A linear regression model with April 1 through July 31 seasonal runoff (1974-1979) as a function of early April snow cover explains 73% and 82% of the variance, respectively, of the measured flow in the Indus and Kabul Rivers. The correlation between seasonal runoff and snow cover is significant at the 97% level for the Indus River and at the 99% level for the Kabul River. Combining Rango et al.'s (1977) data for 1969-73 with the above period, the April snow cover explains 60% and 90% of the variance, respectively, of the measured flow in the Indus and Kabul Rivers. In an attempt to improve the Indus relationship, a multiple regression model, with April 1 through July 31, 1969-79, seasonal runoff in the Indus River as a function of early April snow-covered area of the basin and concurrent runoff in the adjoining Kabul River, explains 79% of the variability in flow. Moreover, a significant reduction (27%) in the standard error of estimate results from using the multi-variate model. For each year of the study period, 1969-79, a separate multiple regression equation is developed dropping the data for the year in question from the data-base and using those for the rest of the years. The snow cover area and concurrent runoff data are then used to estimate the snowmelt runoff for that particular year.The difference between the estimated and observed dircharge values averaged over the 11 year study period is 10%. Satellite derived snow-covered area is the best available input for snowmelt-runoff estimation in remote, data sparse basins like the Indus and Kabul Rivers. The study has operational relevance to water resource planning and management in the Himalayan region.


2018 ◽  
Vol 10 (3) ◽  
pp. 20
Author(s):  
Shrinidhi Ambinakudige ◽  
Pushkar Inamdar ◽  
Aynaz Lotfata

Snow cover helps regulate the temperature of the Earth's surface. Snowmelt recharges groundwater, provides run-off for rivers and creeks, and acts as a major source of local water for many communities around the world. Since 2000, there has been a significant decrease in the snow-covered area in the Northern Hemisphere. Climate change is the major factor influencing the change in snow cover amount and distribution. We analyze spectral properties of the remote sensing sensors with respect to the study of snow and examine how data from some of the major remote sensing satellite sensors, such as (Advanced Spaceborne Thermal Emission and Reflection Radiometer) ASTER, Landsat-8, and Sentinel-2, can be used in studying snow. The study was conducted in Mt. Rainier. Although reflectance values recorded were lower due to the timing of the data collection and the aspect of the study site, data can still be used calculate normalized difference snow index (NDSI) to clearly demarcate the snow from other land cover classes. NDSI values in all three satellites ranged from 0.94 to 0.97 in the snow-covered area of the study site. Any pollutants in snow can have a major influence on spectral reflectance in the VIS spectrum because pollutants absorb more than snow.


2009 ◽  
Vol 10 (1) ◽  
pp. 130-148 ◽  
Author(s):  
Benjamin F. Zaitchik ◽  
Matthew Rodell

Abstract Snow cover over land has a significant impact on the surface radiation budget, turbulent energy fluxes to the atmosphere, and local hydrological fluxes. For this reason, inaccuracies in the representation of snow-covered area (SCA) within a land surface model (LSM) can lead to substantial errors in both offline and coupled simulations. Data assimilation algorithms have the potential to address this problem. However, the assimilation of SCA observations is complicated by an information deficit in the observation—SCA indicates only the presence or absence of snow, not snow water equivalent—and by the fact that assimilated SCA observations can introduce inconsistencies with atmospheric forcing data, leading to nonphysical artifacts in the local water balance. In this paper, a novel assimilation algorithm is presented that introduces Moderate Resolution Imaging Spectroradiometer (MODIS) SCA observations to the Noah LSM in global, uncoupled simulations. The algorithm uses observations from up to 72 h ahead of the model simulation to correct against emerging errors in the simulation of snow cover while preserving the local hydrologic balance. This is accomplished by using future snow observations to adjust air temperature and, when necessary, precipitation within the LSM. In global, offline integrations, this new assimilation algorithm provided improved simulation of SCA and snow water equivalent relative to open loop integrations and integrations that used an earlier SCA assimilation algorithm. These improvements, in turn, influenced the simulation of surface water and energy fluxes during the snow season and, in some regions, on into the following spring.


2015 ◽  
Vol 8 (10) ◽  
pp. 8481-8518
Author(s):  
S. Härer ◽  
M. Bernhardt ◽  
K. Schulz

Abstract. Terrestrial photography combined with the recently presented Photo Rectification And ClassificaTIon SoftwarE (PRACTISE V.1.0) has proven to be a valuable source to derive snow cover maps in a high temporal and spatial resolution. The areal coverage of the used digital photographs is however strongly limited. Satellite images on the other hand can cover larger areas but do show uncertainties with respect to the accurate detection of the snow covered area. This is especially the fact if user defined thresholds are needed e.g. in case of the frequently used Normalised-Difference Snow Index (NDSI). The definition of this value is often not adequately defined by either a general value from literature or over the impression of the user but not by reproducible independent information. PRACTISE V.2.0 addresses this important aspect and does show additional improvements. The Matlab based software is now able to automatically process and detect snow cover in satellite images. A simultaneously captured camera-derived snow cover map is in this case utilised as in-situ information for calibrating the NDSI threshold value. Moreover, an additional automatic snow cover classification, specifically developed to classify shadow-affected photographs was included. The improved software was tested for photographs and Landsat 7 Enhanced Thematic Mapper (ETM+) as well as Landsat 8 Operational Land Imager (OLI) scenes in the Zugspitze massif (Germany). The results have shown that using terrestrial photography in combination with satellite imagery can lead to an objective, reproducible and user-independent derivation of the NDSI threshold and the resulting snow cover map. The presented method is not limited to the sensor system or the threshold used in here but offers manifold application options for other scientific branches.


2021 ◽  
Author(s):  
Nora Helbig ◽  
Michael Schirmer ◽  
Jan Magnusson ◽  
Flavia Mäder ◽  
Alec van Herwijnen ◽  
...  

Abstract. The snow cover spatial variability in mountainous terrain changes considerably over the course of a snow season. In this context, fractional snow-covered area (fSCA) is therefore an essential model parameter characterizing how much of the ground surface in a grid cell is currently covered by snow. We present a seasonal fSCA algorithm using a recent scale-independent fSCA parameterization. For the seasonal implementation we track snow depth (HS) and snow water equivalent (SWE) and account for several alternating accumulation-ablation phases. Besides tracking HS and SWE, the seasonal fSCA algorithm only requires computing subgrid terrain parameters from a fine-scale summer digital elevation model. We implemented the new algorithm in a multilayer energy balance snow cover model. For a spatiotemporal evaluation of modelled fSCA we compiled three independent fSCA data sets. Evaluating modelled 1 km fSCA seasonally with fSCA derived from airborne-acquired fine-scale HS data, satellite- as well as terrestrial camera-derived fSCA showed overall normalized root mean square errors of respectively 9 %, 20 % and 22 %, and represented seasonal trends well. The overall good model performance suggests that the seasonal fSCA algorithm can be applied in other geographic regions by any snow model application.


2016 ◽  
Vol 9 (1) ◽  
pp. 307-321 ◽  
Author(s):  
S. Härer ◽  
M. Bernhardt ◽  
K. Schulz

Abstract. Terrestrial photography combined with the recently presented Photo Rectification And ClassificaTIon SoftwarE (PRACTISE V.1.0) has proven to be a valuable source to derive snow cover maps in a high temporal and spatial resolution. The areal coverage of the used digital photographs is however strongly limited. Satellite images on the other hand can cover larger areas but do show uncertainties with respect to the accurate detection of the snow covered area. This is especially the fact if user defined thresholds are needed, e.g. in case of the frequently used normalized-difference snow index (NDSI). The definition of this value is often not adequately defined by either a general value from literature or over the impression of the user, but not by reproducible independent information. PRACTISE V.2.1 addresses this important aspect and shows additional improvements. The Matlab-based software is now able to automatically process and detect snow cover in satellite images. A simultaneously captured camera-derived snow cover map is in this case utilized as in situ information for calibrating the NDSI threshold value. Moreover, an additional automatic snow cover classification, specifically developed to classify shadow-affected photographs, was included. The improved software was tested for photographs and Landsat 7 Enhanced Thematic Mapper (ETM+) as well as Landsat 8 Operational Land Imager (OLI) scenes in the Zugspitze massif (Germany). The results show that using terrestrial photography in combination with satellite imagery can lead to an objective, reproducible, and user-independent derivation of the NDSI threshold and the resulting snow cover map. The presented method is not limited to the sensor system or the threshold used in here but offers manifold application options for other scientific branches.


Sensors ◽  
2019 ◽  
Vol 19 (8) ◽  
pp. 1945 ◽  
Author(s):  
Petr Gabrlik ◽  
Premysl Janata ◽  
Ludek Zalud ◽  
Josef Harcarik

This article presents unmanned aerial system (UAS)-based photogrammetry as an efficient method for the estimation of snow-field parameters, including snow depth, volume, and snow-covered area. Unlike similar studies employing UASs, this method benefits from the rapid development of compact, high-accuracy global navigation satellite system (GNSS) receivers. Our custom-built, multi-sensor system for UAS photogrammetry facilitates attaining centimeter- to decimeter-level object accuracy without deploying ground control points; this technique is generally known as direct georeferencing. The method was demonstrated at Mapa Republiky, a snow field located in the Krkonose, a mountain range in the Czech Republic. The location has attracted the interest of scientists due to its specific characteristics; multiple approaches to snow-field parameter estimation have thus been employed in that area to date. According to the results achieved within this study, the proposed method can be considered the optimum solution since it not only attains superior density and spatial object accuracy (approximately one decimeter) but also significantly reduces the data collection time and, above all, eliminates field work to markedly reduce the health risks associated with avalanches.


Sign in / Sign up

Export Citation Format

Share Document