scholarly journals Evaluation of an operational ocean model configuration at 1/12° spatial resolution for the Indonesian seas – Part 1: Ocean physics

2015 ◽  
Vol 8 (8) ◽  
pp. 6611-6668 ◽  
Author(s):  
B. Tranchant ◽  
G. Reffray ◽  
E. Greiner ◽  
D. Nugroho ◽  
A. Koch-Larrouy ◽  
...  
Keyword(s):  
Ocean Circulation ◽  
Satellite Data ◽  
Water Mass ◽  
Ocean Model ◽  
Internal Tides ◽  
Global Ocean ◽  
Open Boundary ◽  
Indonesian Throughflow ◽  
The South ◽  
Water Mass Transformation

Abstract. INDO12, a 1/12° regional version of the NEMO physical ocean model covering the whole Indonesian EEZ has been developed and is now running every week in the framework of the INDESO project (Infrastructure Development of Space Oceanography) implemented by the Indonesian Ministry of Marine Affairs and Fisheries. The initial hydrographic conditions as well as open boundary conditions are derived from the operational global ocean forecasting system at 1/4° operated by Mercator Ocean. Atmospheric forcing fields (3 hourly ECMWF analyses) are used to force the regional model. INDO12 is also forced by tidal currents and elevations, and by the inverse barometer effect. The turbulent mixing induced by internal tides is taken into account through a specific parameterization. In this study we evaluate the model skill through comparisons with various datasets including outputs of the parent model, climatologies, in situ temperature and salinity measurements, and satellite data. The simulated and altimeter-derived Eddy Kinetic Energy fields display similar patterns and confirm that tides are a dominant forcing in the area. The volume transport of the Indonesian ThroughFlow is in good agreement with the INSTANT current meter estimates while the transport through Luzon Strait is, on average, westward but probably too weak. Significant water mass transformation occurs along the main routes of the Indonesian Throughflow (ITF) and compares well with observations. Vertical mixing is able to erode the South and North Pacific subtropical waters salinity maximum as seen in TS diagrams. Compared to satellite data, surface salinity and temperature fields display marked biases in the South China Sea. Altogether, INDO12 proves to be able to provide a very realistic simulation of the ocean circulation and water mass transformation through the Indonesian Archipelago. A few weaknesses are also detected. Work is on-going to reduce or eliminate these problems in the second INDO12 version.

scholarly journals Evaluation of an operational ocean model configuration at 1/12° spatial resolution for the Indonesian seas (NEMO2.3/INDO12) – Part 1: Ocean physics

2016 ◽  
Vol 9 (3) ◽  
pp. 1037-1064 ◽  
Author(s):  
Benoît Tranchant ◽  
Guillaume Reffray ◽  
Eric Greiner ◽  
Dwiyoga Nugroho ◽  
Ariane Koch-Larrouy ◽  
...  
Keyword(s):  
Satellite Data ◽  
Water Mass ◽  
Ocean Model ◽  
Internal Tides ◽  
Global Ocean ◽  
Open Boundary ◽  
Biogeochemical Model ◽  
The South ◽  
Medium Range Weather Forecast ◽  
Water Mass Transformation

Abstract. INDO12 is a 1/12° regional version of the NEMO physical ocean model covering the whole Indonesian EEZ (Exclusive Economic Zone). It has been developed and is now running every week in the framework of the INDESO (Infrastructure Development of Space Oceanography) project implemented by the Indonesian Ministry of Marine Affairs and Fisheries. The initial hydrographic conditions as well as open-boundary conditions are derived from the operational global ocean forecasting system at 1/4° operated by Mercator Océan. Atmospheric forcing fields (3-hourly ECMWF (European Centre for Medium-Range Weather Forecast) analyses) are used to force the regional model. INDO12 is also forced by tidal currents and elevations, and by the inverse barometer effect. The turbulent mixing induced by internal tides is taken into account through a specific parameterisation. In this study we evaluate the model skill through comparisons with various data sets including outputs of the parent model, climatologies, in situ temperature and salinity measurements, and satellite data. The biogeochemical model results assessment is presented in a companion paper (Gutknecht et al., 2015). The simulated and altimeter-derived Eddy Kinetic Energy fields display similar patterns and confirm that tides are a dominant forcing in the area. The volume transport of the Indonesian throughflow (ITF) is in good agreement with the INSTANT estimates while the transport through Luzon Strait is, on average, westward but probably too weak. Compared to satellite data, surface salinity and temperature fields display marked biases in the South China Sea. Significant water mass transformation occurs along the main routes of the ITF and compares well with observations. Vertical mixing is able to modify the South and North Pacific subtropical water-salinity maximum as seen in T–S diagrams. In spite of a few weaknesses, INDO12 proves to be able to provide a very realistic simulation of the ocean circulation and water mass transformation through the Indonesian Archipelago. Work is ongoing to reduce or eliminate the remaining problems in the second INDO12 version.

scholarly journals Impact of Parameterized Internal Wave Drag on the Semidiurnal Energy Balance in a Global Ocean Circulation Model

2016 ◽  
Vol 46 (5) ◽  
pp. 1399-1419 ◽  
Author(s):  
Maarten C. Buijsman ◽  
Joseph K. Ansong ◽  
Brian K. Arbic ◽  
James G. Richman ◽  
Jay F. Shriver ◽  
...  
Keyword(s):  
Internal Wave ◽  
Ocean Circulation ◽  
Deep Water ◽  
Mode Conversion ◽  
Circulation Model ◽  
Wave Drag ◽  
Ocean Model ◽  
Internal Tides ◽  
Global Ocean ◽  
Numerical Dissipation

AbstractThe effects of a parameterized linear internal wave drag on the semidiurnal barotropic and baroclinic energetics of a realistically forced, three-dimensional global ocean model are analyzed. Although the main purpose of the parameterization is to improve the surface tides, it also influences the internal tides. The relatively coarse resolution of the model of ~8 km only permits the generation and propagation of the first three vertical modes. Hence, this wave drag parameterization represents the energy conversion to and the subsequent breaking of the unresolved high modes. The total tidal energy input and the spatial distribution of the barotropic energy loss agree with the Ocean Topography Experiment (TOPEX)/Poseidon (TPXO) tidal inversion model. The wave drag overestimates the high-mode conversion at ocean ridges as measured against regional high-resolution models. The wave drag also damps the low-mode internal tides as they propagate away from their generation sites. Hence, it can be considered a scattering parameterization, causing more than 50% of the deep-water dissipation of the internal tides. In the near field, most of the baroclinic dissipation is attributed to viscous and numerical dissipation. The far-field decay of the simulated internal tides is in agreement with satellite altimetry and falls within the broad range of Argo-inferred dissipation rates. In the simulation, about 12% of the semidiurnal internal tide energy generated in deep water reaches the continental margins.

scholarly journals Reply to “Comments on ‘Diathermal Heat Transport in a Global Ocean Model’”

2019 ◽  
Vol 49 (8) ◽  
pp. 2195-2197 ◽  
Author(s):  
Ryan M. Holmes ◽  
Jan D. Zika ◽  
Matthew H. England
Keyword(s):  
Water Mass ◽  
Control Volume ◽  
Internal Heat ◽  
Heat Content ◽  
Boussinesq Approximation ◽  
Ocean Model ◽  
Heat Fluxes ◽  
Global Ocean ◽  
Volume Flux ◽  
Water Mass Transformation

AbstractHochet and Tailleux (2019), in a comment on Holmes et al. (2019), argue that under the incompressible Boussinesq approximation the “sum of the volume fluxes through any kind of control volume must integrate to zero at all times.” They hence argue that the expression in Holmes et al. (2019) for the change in the volume of seawater warmer than a given temperature is inaccurate. Here we clarify what is meant by the term “volume flux” as used in Holmes et al. (2019) and also more generally in the water-mass transformation literature. Specifically, a volume flux across a surface can occur either due to fluid moving through a fixed surface, or due to the surface moving through the fluid. Interpreted in this way, we show using several examples that the statement from Hochet and Tailleux (2019) quoted above does not apply to the control volume considered in Holmes et al. (2019). Hochet and Tailleux (2019) then derive a series of expressions for the water-mass transformation or volume flux across an isotherm in the general, compressible case. In the incompressible Boussinesq limit these expressions reduce to a form (similar to that provided in Holmes et al. 2019) that involves the temperature derivative of the diabatic heat fluxes. Due to this derivative, can be difficult to robustly estimate from ocean model output. This emphasizes one of the advantages of the approach of Holmes et al. (2019), namely, does not appear in the internal heat content budget and is not needed to describe the flow of internal heat content into and around the ocean.

scholarly journals Arctic Ocean Water Mass Transformation in S–T Coordinates

2015 ◽  
Vol 45 (4) ◽  
pp. 1025-1050 ◽  
Author(s):  
Per Pemberton ◽  
Johan Nilsson ◽  
Magnus Hieronymus ◽  
H. E. Markus Meier
Keyword(s):  
Arctic Ocean ◽  
Ocean Circulation ◽  
Water Mass ◽  
Circulation Model ◽  
The Arctic ◽  
Global Ocean ◽  
Freshwater Flux ◽  
The Arctic Ocean ◽  
Water Mass Transformation ◽  
Water Mass Transformations

AbstractIn this paper, water mass transformations in the Arctic Ocean are studied using a recently developed salinity–temperature (S–T) framework. The framework allows the water mass transformations to be succinctly quantified by computing the surface and internal diffusive fluxes in S–T coordinates. This study shows how the method can be applied to a specific oceanic region, in this case the Arctic Ocean, by including the advective exchange of water masses across the boundaries of the region. Based on a simulation with a global ocean circulation model, the authors examine the importance of various parameterized mixing processes and surface fluxes for the transformation of water across isohaline and isothermal surfaces in the Arctic Ocean. The model-based results reveal a broadly realistic Arctic Ocean where the inflowing Atlantic and Pacific waters are primarily cooled and freshened before exiting back to the North Atlantic. In the model, the water mass transformation in the T direction is primarily accomplished by the surface heat flux. However, the surface freshwater flux plays a minor role in the transformation of water toward lower salinities, which is mainly driven by a downgradient mixing of salt in the interior ocean. Near the freezing line, the seasonal melt and growth of sea ice influences the transformation pattern.

scholarly journals M2 tidal dynamics in the Ross Sea

2003 ◽  
Vol 15 (1) ◽  
pp. 41-46 ◽  
Author(s):  
ROBIN ROBERTSON ◽  
AIKE BECKMANN ◽  
HARTMUT HELLMER
Keyword(s):  
Continental Shelf ◽  
Ross Sea ◽  
Tidal Energy ◽  
Ocean Model ◽  
Internal Tides ◽  
Global Ocean ◽  
Tidal Dynamics ◽  
Tidal Elevation ◽  
Shelf Slope ◽  
Continental Shelf Slope

In certain regions of the Southern Ocean, tidal energy is believed to foster the mixing of different water masses, which eventually contribute to the formation of deep and bottom waters. The Ross Sea is one of the major ventilation sites of the global ocean abyss and a region of sparse tidal observations. We investigated M2 tidal dynamics in the Ross Sea using a three-dimensional sigma coordinate model, the Regional Ocean Model System (ROMS). Realistic topography and hydrography from existing observational data were used with a single tidal constituent, the semi-diurnal M2. The model fields faithfully reproduced the major features of the tidal circulation and had reasonable agreement with ten existing tidal elevation observations and forty-two existing tidal current measurements. The differences were attributed primarily to topographic errors. Internal tides were generated at the continental shelf/slope break and other areas of steep topography. Strong vertical shears in the horizontal velocities occurred under and at the edges of the Ross Ice Shelf and along the continental shelf/slope break. Estimates of lead formation based on divergence of baroclinic velocities were significantly higher than those based on barotrophic velocities, reaching over 10% at the continental shelf/slope break.

scholarly journals Investigation of the Internal Tides in the Northwest Pacific Ocean Considering the Background Circulation and Stratification

2020 ◽  
Vol 50 (11) ◽  
pp. 3165-3188
Author(s):  
Pengyang Song ◽  
Xueen Chen
Keyword(s):  
Pacific Ocean ◽  
Ocean Circulation ◽  
Conversion Rate ◽  
Internal Tide ◽  
Internal Tides ◽  
Global Ocean ◽  
Northwest Pacific ◽  
Northwest Pacific Ocean ◽  
Baroclinic Tide ◽  
The Northwest Pacific Ocean

AbstractA global ocean circulation and tide model with nonuniform resolution is used in this work to resolve the ocean circulation globally as well as mesoscale eddies and internal tides regionally. Focusing on the northwest Pacific Ocean (NWP, 0°–35°N, 105°–150°E), a realistic experiment is conducted to simulate internal tides considering the background circulation and stratification. To investigate the influence of a background field on the generation and propagation of internal tides, idealized cases with horizontally homogeneous stratification and zero surface fluxes are also implemented for comparison. By comparing the realistic cases with idealized ones, the astronomical tidal forcing is found to be the dominant factor influencing the internal tide conversion rate magnitude, whereas the stratification acts as a secondary factor. However, stratification deviations in different areas can lead to an error exceeding 30% in the local internal tide energy conversion rate, indicating the necessity of a realistic stratification setting for simulating the entire NWP. The background shear is found to refract propagating diurnal internal tides by changing the effective Coriolis frequencies and phase speeds, while the Doppler-shifting effect is remarkable for introducing biases to semidiurnal results. In addition, nonlinear baroclinic tide energy equations considering the background circulation and stratification are derived and diagnosed in this work. The mean flow–baroclinic tide interaction and nonlinear energy flux are the most significant nonlinear terms in the derived equations, and nonlinearity is estimated to contribute approximately 5% of the total internal tide energy in the greater Luzon Strait area.

scholarly journals Multi-grid algorithm for passive tracer transport in the NEMO ocean circulation model: a case study with the NEMO OGCM (version 3.6)

2020 ◽  
Vol 13 (11) ◽  
pp. 5465-5483
Author(s):  
Clément Bricaud ◽  
Julien Le Sommer ◽  
Gurvan Madec ◽  
Christophe Calone ◽  
Julie Deshayes ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Ocean Circulation ◽  
Circulation Model ◽  
Ocean Model ◽  
Ocean Dynamics ◽  
Global Ocean ◽  
Passive Tracer ◽  
Tracer Transport ◽  
Ocean Circulation Model ◽  
Grid Algorithm

Abstract. Ocean biogeochemical models are key tools for both scientific and operational applications. Nevertheless the cost of these models is often expensive because of the large number of biogeochemical tracers. This has motivated the development of multi-grid approaches where ocean dynamics and tracer transport are computed on grids of different spatial resolution. However, existing multi-grid approaches to tracer transport in ocean modelling do not allow the computation of ocean dynamics and tracer transport simultaneously. This paper describes a new multi-grid approach developed for accelerating the computation of passive tracer transport in the Nucleus for European Modelling of the Ocean (NEMO) ocean circulation model. In practice, passive tracer transport is computed at runtime on a grid with coarser spatial resolution than the hydrodynamics, which reduces the CPU cost of computing the evolution of tracers. We describe the multi-grid algorithm, its practical implementation in the NEMO ocean model, and discuss its performance on the basis of a series of sensitivity experiments with global ocean model configurations. Our experiments confirm that the spatial resolution of hydrodynamical fields can be coarsened by a factor of 3 in both horizontal directions without significantly affecting the resolved passive tracer fields. Overall, the proposed algorithm yields a reduction by a factor of 7 of the overhead associated with running a full biogeochemical model like PISCES (with 24 passive tracers). Propositions for further reducing this cost without affecting the resolved solution are discussed.

scholarly journals A parameterization of local and remote tidal mixing

2020 ◽  
Author(s):  
Casimir de Lavergne ◽  
Clément Vic ◽  
Gurvan Madec ◽  
Fabien Roquet ◽  
Amy Waterhouse ◽  
...  
Keyword(s):  
Vertical Mixing ◽  
Three Dimensional ◽  
Internal Tide ◽  
Ocean Model ◽  
Internal Tides ◽  
Tidal Mixing ◽  
Global Ocean ◽  
Energy Conserving ◽  
Energy Constrained ◽  
Lagrangian Tracking

<p>Vertical mixing is often regarded as the Achilles’ heel of ocean models. In particular, few models include a comprehensive and energy-constrained parameterization of mixing by internal ocean tides. Here, we present an energy-conserving mixing scheme which accounts for the local breaking of high-mode internal tides and the distant dissipation of low-mode internal tides. The scheme relies on four static two-dimensional maps of internal tide dissipation, constructed using mode-by-mode Lagrangian tracking of energy beams from sources to sinks. Each map is associated with a distinct dissipative process and a corresponding vertical structure. Applied to an observational climatology of stratification, the scheme produces a global three-dimensional map of dissipation which compares well with available microstructure observations and with upper-ocean finestructure mixing estimates. Implemented in the NEMO global ocean model, the scheme improves the representation of deep water-mass transformation and obviates the need for a constant background diffusivity.</p>

scholarly journals Impact of Channel Geometry and Rotation on the Trapping of Internal Tides

2007 ◽  
Vol 37 (11) ◽  
pp. 2740-2763 ◽  
Author(s):  
Sybren Drijfhout ◽  
Leo R. M. Maas
Keyword(s):  
Continental Slope ◽  
Three Dimensional ◽  
Tidal Energy ◽  
Ocean Model ◽  
Internal Tides ◽  
Open Boundary ◽  
Kelvin Wave ◽  
Channel Geometry ◽  
Channel Slope ◽  
The Cross

Abstract The generation and propagation of internal tides has been studied with an isopycnic three-dimensional ocean model. The response of a uniformly stratified sea in a channel, which is forced by a barotropic tide on its open boundary, is considered. The tide progresses into the channel and forces internal tides over a continental slope at the other end. The channel has a length of 1200 km and a width of 191.25 km. The bottom profile has been varied. In a series of four experiments it is shown how the cross-channel geometry affects the propagation and trapping of internal tides, and the penetration scale of wave energy, away from the continental slope, is discussed. In particular it is found that a cross-channel bottom slope constrains the penetration of the internal tidal energy. Most internal waves refract toward a cross-channel plane where they are trapped. The exception is formed by edge waves that carry part of the energy away from the continental slope. In the case of rotation near the continental slope, the Poincaré waves that arise in the absence of a cross-channel slope no longer bear the characteristics of the wave attractor predicted by 2D theory, but are almost completely arrested, while the right-bound Kelvin wave preserves the 2D attractor in the cross-channel plane, which is present in the nonrotating case. The reflected, barotropic right-bound Kelvin wave acts as a secondary internal wave generator along the cross-channel slope.

Internal salt content: a useful framework for understanding the oceanic branch of the water cycle

2021 ◽  
Author(s):  
Christopher Bladwell ◽  
Ryan M. Holmes ◽  
Jan D. Zika
Keyword(s):  
Fresh Water ◽  
Ocean Circulation ◽  
Water Cycle ◽  
Salt Content ◽  
Ocean Model ◽  
Global Ocean ◽  
Freshwater Forcing ◽  
Freshwater Fluxes ◽  
Ocean Salinity ◽  
Isopycnal Mixing

AbstractThe global water cycle is dominated by an atmospheric branch which transfers fresh water away from subtropical regions and an oceanic branch which returns that fresh water from subpolar and tropical regions. Salt content is commonly used to understand the oceanic branch because surface freshwater fluxes leave an imprint on ocean salinity. However, freshwater fluxes do not actually change the amount of salt in the ocean and – in the mean – no salt is transported meridionally by ocean circulation. To study the processes which determine ocean salinity we introduce a new variable: “internal salt” and its counterpart “internal fresh water”. Precise budgets for internal salt in salinity coordinates relate meridional and diahaline transport to surface freshwater forcing, ocean circulation and mixing, and reveal the pathway of fresh water in the ocean. We apply this framework to a 1° global ocean model. We find that in order for fresh water to be exported from the ocean’s tropical and subpolar regions to the subtropics, salt must be mixed across the salinity surfaces that bound those regions. In the tropics, this mixing is achieved by parameterized vertical mixing, along-isopycnal mixing, and numerical mixing associated with truncation errors in the model’s advection scheme, while along-isopycnal mixing dominates at high latitudes. We analyze the internal freshwater budgets of the Indo-Pacific and Atlantic Ocean basins and identify the transport pathways between them which redistribute fresh water added through precipitation, balancing asymmetries in freshwater forcing between the basins.

Sign in / Sign up

Export Citation Format

Share Document