scholarly journals Automatic Change Detection Based on Edge Information Using Two Different Types of Ortho Image

2019 ◽  
Vol 2 ◽  
pp. 1-6
Author(s):  
Akira Sasagawa ◽  
Shuto Sugai ◽  
Mayumi Noguchi
Keyword(s):  
Change Detection ◽  
Conventional Method ◽  
Satellite Image ◽  
Aerial Photo ◽  
Edge Information ◽  
Different Types ◽  
The Difference ◽  
Detection Quality ◽  
Edge Vector ◽  
Robust Result

<p><strong>Abstract.</strong> A new algorithm of automatic change detection for update of base map is presented. In conventional method, using two different types of ortho image, such as aerial photo and satellite image, makes detection quality worse due to the difference of each contrast, brightness, color balance and so on. To obtain robust result against such difference between two images, we introduce edge-vector technique. We applied this method using two ortho images derived from each aerial photo and satellite image. We have tested our method and confirmed a performance of the change detection by the interpretation test. In this paper, the detailed algorithm and the result of interpretation test are reported.</p>

scholarly journals Determining and Mapping of Forest Species Using Remote Sensing and GIS in Amadiyah Province

2021 ◽  
Vol 910 (1) ◽  
pp. 012126
Author(s):  
Muzahim Saeed Younis ◽  
Saifaldeen Maadh Mustafa
Keyword(s):  
Satellite Image ◽  
Coverage Area ◽  
Ground Control Points ◽  
Different Types ◽  
Effective Role ◽  
The Difference ◽  
Trees And Shrubs ◽  
Total Type ◽  
Total Accuracy ◽  
Tree Type

Abstract The location indication was classified as a directed classification for all 44 species of trees present at the study site based on the projection of the tree coordinates on the false-color satellite images, which were taken from the location of these trees and their reflectivity measured in the laboratory. Where the satellite image was classified, based on the points taken for trees as field training areas, the visual output image classified by the directed classification method included 23 classes and represents the distribution of trees and shrubs at the site. The classification accuracy of vegetation and non-vegetation covers was also assessed by taking (334) ground control points for the various land targets and vegetation covers to determine this accuracy. Thus, we obtained a total accuracy of the classified statement (82.1%). This indicates that the accuracy of the overall classification is good, acceptable, and reliable. The percentage was high for all varieties, reaching (93%) for the frothy mug, weeping willow, and wild amethyst, and the lowest (75%) for olives, grassy slopes, and flat barren soils, and this was also acceptable. Through this accuracy, we can determine the extent to which the classification matches these goals and covers, and the possibility of relying on the prepared map for its future use. The number of each tree type was estimated by determining the coverage area for each tree type and the total area to cover the total type in the area using the proportional method. From this, it was found that the different types of trees differ in their presence on the site and the reason is attributed to the difference in height, direction and the different organic matter in which these types were grown and the environmental conditions appropriate to the species and that these factors have an effective role in the distribution of species and their densities in the different sites of the study area. We also noticed that the highest presence in terms of number was of edible oaks, followed by tannins oak in second place, at a rate ranging from (29.84%, 6.35%).

scholarly journals Investigation of Color Reproduction on Linen Fabrics when Printing with Mimaki TX400-1800D Inkjet with Pigment TP250 Dyes

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 354
Author(s):  
Tim Tofan ◽  
Rimantas Stonkus ◽  
Raimondas Jasevičius
Keyword(s):  
Mechanical Properties ◽  
Color Reproduction ◽  
Related Effect ◽  
Color Characteristics ◽  
Fabric Density ◽  
Different Types ◽  
The Difference ◽  
Printing Parameters ◽  
Linen Fabric

The aim of this research is to investigate related effect of dyeability to linen textiles related to different printing parameters. The study investigated the change in color characteristics when printing on linen fabrics with an inkjet MIMAKI Tx400-1800D printer with pigmented TP 250 inks. The dependence of color reproduction on linen fabrics on the number of print head passes, number of ink layers to be coated, linen fabric density, and different types of linen fabric was investigated. All this affects the quality of print and its mechanical properties. The change in color characteristics on different types of linen fabrics was determined experimentally. We determine at which print settings the most accurate color reproduction can be achieved on different linen fabrics. The difference between the highest and the lowest possible number of head passages was investigated. The possibilities of reproducing different linen fabric colors were determined.

scholarly journals Evaluation of Wear Behaviour in Metallic Binders Employed in Diamond Tools for Cutting Stone

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3988
Author(s):  
Fátima Ternero ◽  
Pedro M. Amaral ◽  
Jorge Cruz Fernandes ◽  
Luís Guerra Rosa
Keyword(s):  
Wear Behavior ◽  
Wear Behaviour ◽  
Empirical Expression ◽  
Testing Conditions ◽  
Diamond Tools ◽  
Test Methodology ◽  
Different Types ◽  
Stone Material ◽  
The Difference ◽  
Wear Tests

A type of disc-on-plate test methodology was used to determine the wear behavior of metallic binders employed in the manufacturing of diamond impregnated tools. The disc consists of a special circular wheel that allows the binder materials alone (i.e., without diamond, but sintered under conditions identical to those of the complete tool) to be tested against a plate of stone material under pre-determined testing conditions. The testing conditions are intended to be equivalent to those used in the industrial processes. Using plates of five types of granite and one type of marble, this work comprises wear tests of 15 different types of metallic binders and two sintering modes conducted under, at least, three different values of contact-force. The analysis of the results demonstrated that the wear of the binders can be related to their mechanical properties through an empirical expression. The larger the difference between the characteristics of the tribological pair (binder versus stone), the higher is the correlation between the experimental wear data and the values given by the empirical expression. The relationships presented in this work allow predicting the wear behavior of the binder, and therefore may help in the design process of diamond tools. There was a clear difference between the wear behavior of metallic binders when they were employed against the two main classes of stone under analysis (marble and granite).

scholarly journals A Novel Active Contours Model for Environmental Change Detection from Multitemporal Synthetic Aperture Radar Images

2020 ◽  
Vol 12 (11) ◽  
pp. 1746
Author(s):  
Salman Ahmadi ◽  
Saeid Homayouni
Keyword(s):  
Synthetic Aperture Radar ◽  
Change Detection ◽  
Active Contours ◽  
Training Data ◽  
Synthetic Aperture ◽  
Data Sets ◽  
Difference Image ◽  
Proposed Model ◽  
The Difference ◽  
Aperture Radar

In this paper, we propose a novel approach based on the active contours model for change detection from synthetic aperture radar (SAR) images. In order to increase the accuracy of the proposed approach, a new operator was introduced to generate a difference image from the before and after change images. Then, a new model of active contours was developed for accurately detecting changed regions from the difference image. The proposed model extracts the changed areas as a target feature from the difference image based on training data from changed and unchanged regions. In this research, we used the Otsu histogram thresholding method to produce the training data automatically. In addition, the training data were updated in the process of minimizing the energy function of the model. To evaluate the accuracy of the model, we applied the proposed method to three benchmark SAR data sets. The proposed model obtains 84.65%, 87.07%, and 96.26% of the Kappa coefficient for Yellow River Estuary, Bern, and Ottawa sample data sets, respectively. These results demonstrated the effectiveness of the proposed approach compared to other methods. Another advantage of the proposed model is its high speed in comparison to the conventional methods.

scholarly journals STRUCTURAL BEHAVIOR OF PILE CAP 3 PILE WITH EKSENTRIC LOAD DESIGNED USING STRUT AND TIE MODEL WITH NUMERICAL METHOD

2019 ◽  
Vol 17 (1) ◽  
Author(s):  
Panji Ginaya Taufik
Keyword(s):  
Conventional Method ◽  
Vertical Load ◽  
Eccentric Load ◽  
Strut And Tie ◽  
Model Method ◽  
Truss Model ◽  
Stress Trajectory ◽  
Pile Cap ◽  
The Difference ◽  
Strut And Tie Model

Pile cap is a structure to distribute load from the upper structure to the sub structure. Often the planning of the pile cap is approached as a two way slab or beam with pile as restrain, by consider the bending and shear separately. As is the case with conventional methods that consider 1-way shear, 2-way shear, and bending separately. The strut and tie model can be used as an alternative method in designing a pile cap, by approaching the stress trajectory with the truss model. In this study, a pile cap will be designed using the conventional method and the strut and tie model, the pile cap with 3 pile cap and an eccentric load. Then the results are tested numerically using Abaqus to determine the difference in behavior. The main reinforcement results from the strut and tie model method are more evenly stressed than the conventional method, also the vertical load needed to achieve the main reinforcement yield stress strut and tie model (1100 kN) is greater than the conventional method (900 kN).

scholarly journals LOGICAL REASONING ANALYSIS BASED ON HIPPOCRATES PERSONALITY TYPES

Aksioma ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 57-73
Author(s):  
Nurdin Nurdin ◽  
Ita Sarmita Samad ◽  
Sardia Sardia
Keyword(s):  
Problem Solving ◽  
Mathematical Problem ◽  
Logical Reasoning ◽  
Personality Types ◽  
The Body ◽  
Mathematical Problem Solving ◽  
Different Types ◽  
Ways Of Thinking ◽  
The Difference ◽  
Descriptive Qualitative

Abstract: The theory distinguishes human based on four different personality types such as: sanguine, choleric, melancholic, and phlegmatic. Different types of personality caused by differences in the dominant fluid in the body. These differences will result in terms of behavior, ways of thinking and to get along. The type of this research that is descriptive qualitative which it is describing the logical reasoning based on Hippocrates personality types. The logical reasoning is analyzed through the four types of personality in relation to mathematical problem solving. The Analysis is done based on the logical reasoning indicator/ subindicator and the steps of problem solving stated by Polya. The result shows that there is a reasoning difference on each type of personalities. The difference can be terms of the strenght or the weakness. Sanguine is quicker in understanding problems and communicating results, choleric is more accelerated in work, melancholic is more perfect at work, and  phlegmatic is superior in terms of accuracy. Keywords: Logical reasoning, Hippocrates, sanguine, choleric, melancholic, phlegmatic

scholarly journals SAR Image Change Detection Based on Multi-scale Feature Extraction

2021 ◽  
Vol 10 (4) ◽  
pp. 077-081
Author(s):  
Xiaoqian Yuan ◽  
Chao Chen ◽  
Shan Tian ◽  
Jiandan Zhong
Keyword(s):  
Feature Extraction ◽  
Change Detection ◽  
Speckle Noise ◽  
Kernel Matrix ◽  
Sar Image ◽  
Scale Feature ◽  
Difference Image ◽  
Multi Scale ◽  
Image Change Detection ◽  
The Difference

In order to improve the contrast of the difference image and reduce the interference of the speckle noise in the synthetic aperture radar (SAR) image, this paper proposes a SAR image change detection algorithm based on multi-scale feature extraction. In this paper, a kernel matrix with weights is used to extract features of two original images, and then the logarithmic ratio method is used to obtain the difference images of two images, and the change area of the images are extracted. Then, the different sizes of kernel matrix are used to extract the abstract features of different scales of the difference image. This operation can make the difference image have a higher contrast. Finally, the cumulative weighted average is obtained to obtain the final difference image, which can further suppress the speckle noise in the image.

scholarly journals Philosophies of interreligious dialogue: Practice in search of theory

2011 ◽  
Vol 1 (1) ◽  
pp. 16-24 ◽  
Author(s):  
Oddbjørn Leirvik
Keyword(s):  
Civil Society ◽  
Religious Education ◽  
Emmanuel Levinas ◽  
Interreligious Dialogue ◽  
Interfaith Dialogue ◽  
Faith Communities ◽  
Different Types ◽  
The Difference ◽  
Mutual Change

In this article, I discuss how insights from Martin Buber’s and Emmanuel Levinas’ philosophies of dialogue have enlightened my own experience of inter-faith dialogue in Norway. Central perspectives here are Buber’s notion of ’the realm of the between’ and Levinas’ emphasis on asymmetry and vulnerability. Some other philosophers’ reasonings about dialogue are also considered, from the overall perspective of ’practice in search of theory’. In connection with a distinction be-tween different types of dialogue (’spiritual’ and ’necessary’), the difference between government initiated ’dialogue’ and initiatives originating from the faith communities (i.e., civil society) are discussed. The last part of the article analyses the notion of ’(mutual) change’ which is often brought forward when discussing the aims of interfaith dialogue. In this connection, religious education in school is also considered as a possible arena for dialogue—and ’change’.

Sign in / Sign up

Export Citation Format

Share Document