scholarly journals STUDY ON THE APPLICATION OF AIRBORNE LIDAR IN SEISMIC ACTIVE FAULTS IN THE NORTHERN RIM OF QINLING MOUNTAIN AND THE PIEDMONT OF HUASHAN IN CHINA

Author(s):  
G. He ◽  
A. Wang

Abstract. Seismic active faults are closely related to earthquake disasters. Active faults determine the location and magnitude of destructive earthquakes. Therefore, strengthening active fault investigation and research is one of the main ways to reduce earthquake disasters. Airborne LiDAR, as a measurement method that can quickly obtain large-area and high-precision DEM results, can not only obtain structural distribution features of large-scale study areas on a macro scale, and determine the location and trend of active faults, but also be used to identify microstructural landforms and take researches on fine geomorphic structural features. In this paper, based on the detailed introduction, analysis and summary of the technical schemes, data processing and application of the airborne LiDAR technique in the northern margin of the Qinling Mountains and the Huashan Piedmont Fault Zone, it was demonstrated on the basic methods and technical advantages in seismic active faults and geomorphological research work of the airborne LiDAR technology, and a new and efficient method for seismic fault study was provided.

2020 ◽  
Vol 04 (05) ◽  
pp. 44-48
Author(s):  
Narmin Zakir Najafova ◽  

Factors influencing the formation of land cover of Jalilabad cadastral region are one of the reasons for the diversity of soil formation processes in the area. Intra-zonal soils are subject to the laws of vertical zoning due to changes in the height of the area due to its geographical distribution. Despite the fact that the Jalilabad cadastral region does not have a very large area, its separate parts are characterized by differences in bioclimatic and biogeochemical characteristics. The article shows the analysis and geographical coordinates of the main soil types formed in the Jalilabad cadastral region on the basis of a large-scale land map, depending on the soil-ecological conditions. In order to carry out comparative and ecological assessment of soils, we have made land plots in the study area. Currently, the cut samples are in the laboratory stage for physical and chemical analysis in accordance with the methodology. Key words: soil type, mechanical composition, soil structure, soil profile, GPS


2021 ◽  
Vol 03 (01) ◽  
pp. 88-93
Author(s):  
Nərmin Zakir qızı Nəcəfova Zakir qızı Nəcəfova ◽  

Factors influencing the formation of land cover of Jalilabad cadastral region are one of the reasons for the diversity of soil formation processes in the area. Intra-zonal soils are subject to the laws of vertical zoning due to changes in the height of the area due to its geographical distribution. Despite the fact that the Jalilabad cadastral region does not have a very large area, its separate parts are characterized by differences in bioclimatic and biogeochemical characteristics. The article shows the analysis and geographical coordinates of the main soil types formed in the Jalilabad cadastral region on the basis of a large-scale land map, depending on the soil-ecological conditions. In order to carry out comparative and ecological assessment of soils, we have made land plots in the study area. Currently, the cut samples are in the laboratory stage for physical and chemical analysis in accordance with the methodology. Key words: soil type, mechanical composition, soil structure, soil profile, GPS


2021 ◽  
Vol 11 (6) ◽  
pp. 2561-2571 ◽  
Author(s):  
Muhammad Yaseen ◽  
Muhammad Shahab ◽  
Zeeshan Ahmad ◽  
Rehman Khan ◽  
Syed Farhan Ali Shah ◽  
...  

AbstractThe current research work is an attempt to apply the basic geological procedures, methods of geological mapping, surface and subsurface interpretation and restoration of balanced and retrodeformed cross sections from the Nizampur basin, Khyber Pakhtunkhwa, Pakistan. The work also includes the documentation of several surface structural features, i.e., anticlines, synclines and different types of folds and faults exposed in the vicinity of study area. Four central thrust faults were recognized named as Kahi Thrusts along the cross sections. These thrust faults carried the older sequences of rocks over the younger sequences in different portion along the measured cross section. The folded and faulted rocks in the area show that stratigraphic framework comprises of Eocene, Paleocene, Cretaceous and Jurassic succession of rocks. There are Eocene rocks existing in the extreme South of the mapped area with addition of older Cretaceous and Jurassic succession and contains simple and large-scale folds, faults and back thrust. Two structural transect were mapped which encounter different folds and faults, i.e., X-sections AB oriented NS and CD oriented NE-SW. Restoration of the structural transects was calculated and assumed that at the formation of Main Boundary Thrust, the study area was exposed to the tectonic forces which prognosticated 19.5% shortening in rock sequences from Jurassic to Eocene succession along the measured cross section A_B.


2019 ◽  
Vol 2019 ◽  
pp. 1-14 ◽  
Author(s):  
Milena F. Pinto ◽  
André L. M. Marcato ◽  
Aurélio G. Melo ◽  
Leonardo M. Honório ◽  
Cristina Urdiales

Unmanned aerial vehicles (UAVs) are a relatively new technology. Their application can often involve complex and unseen problems. For instance, they can work in a cooperative-based environment under the supervision of a ground station to speed up critical decision-making processes. However, the amount of information exchanged among the aircraft and ground station is limited by high distances, low bandwidth size, restricted processing capability, and energy constraints. These drawbacks restrain large-scale operations such as large area inspections. New distributed state-of-the-art processing architectures, such as fog computing, can improve latency, scalability, and efficiency to meet time constraints via data acquisition, processing, and storage at different levels. Under these amendments, this research work proposes a mathematical model to analyze distribution-based UAVs topologies and a fog-cloud computing framework for large-scale mission and search operations. The tests have successfully predicted latency and other operational constraints, allowing the analysis of fog-computing advantages over traditional cloud-computing architectures.


2019 ◽  
Author(s):  
Mohammad Atif Faiz Afzal ◽  
Mojtaba Haghighatlari ◽  
Sai Prasad Ganesh ◽  
Chong Cheng ◽  
Johannes Hachmann

<div>We present a high-throughput computational study to identify novel polyimides (PIs) with exceptional refractive index (RI) values for use as optic or optoelectronic materials. Our study utilizes an RI prediction protocol based on a combination of first-principles and data modeling developed in previous work, which we employ on a large-scale PI candidate library generated with the ChemLG code. We deploy the virtual screening software ChemHTPS to automate the assessment of this extensive pool of PI structures in order to determine the performance potential of each candidate. This rapid and efficient approach yields a number of highly promising leads compounds. Using the data mining and machine learning program package ChemML, we analyze the top candidates with respect to prevalent structural features and feature combinations that distinguish them from less promising ones. In particular, we explore the utility of various strategies that introduce highly polarizable moieties into the PI backbone to increase its RI yield. The derived insights provide a foundation for rational and targeted design that goes beyond traditional trial-and-error searches.</div>


2019 ◽  
Author(s):  
Chem Int

This research work presents a facile and green route for synthesis silver sulfide (Ag2SNPs) nanoparticles from silver nitrate (AgNO3) and sodium sulfide nonahydrate (Na2S.9H2O) in the presence of rosemary leaves aqueous extract at ambient temperature (27 oC). Structural and morphological properties of Ag2SNPs nanoparticles were analyzed by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The surface Plasmon resonance for Ag2SNPs was obtained around 355 nm. Ag2SNPs was spherical in shape with an effective diameter size of 14 nm. Our novel approach represents a promising and effective method to large scale synthesis of eco-friendly antibacterial activity silver sulfide nanoparticles.


1990 ◽  
Vol 22 (3-4) ◽  
pp. 291-298
Author(s):  
Frits A. Fastenau ◽  
Jaap H. J. M. van der Graaf ◽  
Gerard Martijnse

More than 95 % of the total housing stock in the Netherlands is connected to central sewerage systems and in most cases the wastewater is treated biologically. As connection to central sewerage systems has reached its economic limits, interest in on-site treatment of the domestic wastewater of the remaining premises is increasing. A large scale research programme into on-site wastewater treatment up to population equivalents of 200 persons has therefore been initiated by the Dutch Ministry of Housing, Physical Planning and Environment. Intensive field-research work did establish that the technological features of most on-site biological treatment systems were satisfactory. A large scale implementation of these systems is however obstructed in different extents by problems of an organisational, financial and/or juridical nature and management difficulties. At present research is carried out to identify these bottlenecks and to analyse possible solutions. Some preliminary results are given which involve the following ‘bottlenecks':-legislation: absence of co-ordination and absence of a definition of ‘surface water';-absence of subsidies;-ownership: divisions in task-setting of Municipalities and Waterboards; divisions involved with cost-sharing;-inspection; operational control and maintenance; organisation of management;-discharge permits;-pollution levy;-sludge disposal. Final decisions and practical elaboration of policies towards on-site treatment will have to be formulated in a broad discussion with all the authorities and interest groups involved.


2020 ◽  
Vol 27 ◽  
Author(s):  
Zaheer Ullah Khan ◽  
Dechang Pi

Background: S-sulfenylation (S-sulphenylation, or sulfenic acid) proteins, are special kinds of post-translation modification, which plays an important role in various physiological and pathological processes such as cytokine signaling, transcriptional regulation, and apoptosis. Despite these aforementioned significances, and by complementing existing wet methods, several computational models have been developed for sulfenylation cysteine sites prediction. However, the performance of these models was not satisfactory due to inefficient feature schemes, severe imbalance issues, and lack of an intelligent learning engine. Objective: In this study, our motivation is to establish a strong and novel computational predictor for discrimination of sulfenylation and non-sulfenylation sites. Methods: In this study, we report an innovative bioinformatics feature encoding tool, named DeepSSPred, in which, resulting encoded features is obtained via n-segmented hybrid feature, and then the resampling technique called synthetic minority oversampling was employed to cope with the severe imbalance issue between SC-sites (minority class) and non-SC sites (majority class). State of the art 2DConvolutional Neural Network was employed over rigorous 10-fold jackknife cross-validation technique for model validation and authentication. Results: Following the proposed framework, with a strong discrete presentation of feature space, machine learning engine, and unbiased presentation of the underline training data yielded into an excellent model that outperforms with all existing established studies. The proposed approach is 6% higher in terms of MCC from the first best. On an independent dataset, the existing first best study failed to provide sufficient details. The model obtained an increase of 7.5% in accuracy, 1.22% in Sn, 12.91% in Sp and 13.12% in MCC on the training data and12.13% of ACC, 27.25% in Sn, 2.25% in Sp, and 30.37% in MCC on an independent dataset in comparison with 2nd best method. These empirical analyses show the superlative performance of the proposed model over both training and Independent dataset in comparison with existing literature studies. Conclusion : In this research, we have developed a novel sequence-based automated predictor for SC-sites, called DeepSSPred. The empirical simulations outcomes with a training dataset and independent validation dataset have revealed the efficacy of the proposed theoretical model. The good performance of DeepSSPred is due to several reasons, such as novel discriminative feature encoding schemes, SMOTE technique, and careful construction of the prediction model through the tuned 2D-CNN classifier. We believe that our research work will provide a potential insight into a further prediction of S-sulfenylation characteristics and functionalities. Thus, we hope that our developed predictor will significantly helpful for large scale discrimination of unknown SC-sites in particular and designing new pharmaceutical drugs in general.


Author(s):  
Mathieu Turgeon-Pelchat ◽  
Samuel Foucher ◽  
Yacine Bouroubi

2021 ◽  
Vol 13 (15) ◽  
pp. 2877
Author(s):  
Yu Tao ◽  
Siting Xiong ◽  
Susan J. Conway ◽  
Jan-Peter Muller ◽  
Anthony Guimpier ◽  
...  

The lack of adequate stereo coverage and where available, lengthy processing time, various artefacts, and unsatisfactory quality and complexity of automating the selection of the best set of processing parameters, have long been big barriers for large-area planetary 3D mapping. In this paper, we propose a deep learning-based solution, called MADNet (Multi-scale generative Adversarial u-net with Dense convolutional and up-projection blocks), that avoids or resolves all of the above issues. We demonstrate the wide applicability of this technique with the ExoMars Trace Gas Orbiter Colour and Stereo Surface Imaging System (CaSSIS) 4.6 m/pixel images on Mars. Only a single input image and a coarse global 3D reference are required, without knowing any camera models or imaging parameters, to produce high-quality and high-resolution full-strip Digital Terrain Models (DTMs) in a few seconds. In this paper, we discuss technical details of the MADNet system and provide detailed comparisons and assessments of the results. The resultant MADNet 8 m/pixel CaSSIS DTMs are qualitatively very similar to the 1 m/pixel HiRISE DTMs. The resultant MADNet CaSSIS DTMs display excellent agreement with nested Mars Reconnaissance Orbiter Context Camera (CTX), Mars Express’s High-Resolution Stereo Camera (HRSC), and Mars Orbiter Laser Altimeter (MOLA) DTMs at large-scale, and meanwhile, show fairly good correlation with the High-Resolution Imaging Science Experiment (HiRISE) DTMs for fine-scale details. In addition, we show how MADNet outperforms traditional photogrammetric methods, both on speed and quality, for other datasets like HRSC, CTX, and HiRISE, without any parameter tuning or re-training of the model. We demonstrate the results for Oxia Planum (the landing site of the European Space Agency’s Rosalind Franklin ExoMars rover 2023) and a couple of sites of high scientific interest.


Sign in / Sign up

Export Citation Format

Share Document