scholarly journals Hydroelastic analysis of ice shelves under long wave excitation

2015 ◽  
Vol 15 (8) ◽  
pp. 1851-1857 ◽  
Author(s):  
T. K. Papathanasiou ◽  
A. E. Karperaki ◽  
E. E. Theotokoglou ◽  
K. A. Belibassakis
Keyword(s):  
Finite Element ◽  
Extreme Values ◽  
Tsunami Wave ◽  
Wave Length ◽  
Bending Moment ◽  
Stable Configuration ◽  
Wave Excitation ◽  
Ice Shelf ◽  
Long Wave ◽  
Hydroelastic Analysis

Abstract. The transient hydroelastic response of an ice shelf under long wave excitation is analysed by means of the finite element method. The simple model, presented in this work, is used for the simulation of the generated kinematic and stress fields in an ice shelf, when the latter interacts with a tsunami wave. The ice shelf, being of large length compared to its thickness, is modelled as an elastic Euler-Bernoulli beam, constrained at the grounding line. The hydrodynamic field is represented by the linearised shallow water equations. The numerical solution is based on the development of a special hydroelastic finite element for the system of governing of equations. Motivated by the 2011 Sulzberger Ice Shelf (SIS) calving event and its correlation with the Honshu Tsunami, the SIS stable configuration is studied. The extreme values of the bending moment distribution in both space and time are examined. Finally, the location of these extrema is investigated for different values of ice shelf thickness and tsunami wave length.

scholarly journals Hydroelastic analysis of ice shelves under long wave excitation

2015 ◽  
Vol 3 (5) ◽  
pp. 3057-3075 ◽  
Author(s):  
T. K. Papathanasiou ◽  
A. E. Karperaki ◽  
E. E. Theotokoglou ◽  
K. A. Belibassakis
Keyword(s):  
Finite Element ◽  
Extreme Values ◽  
Tsunami Wave ◽  
Wave Length ◽  
Bending Moment ◽  
Stable Configuration ◽  
Wave Excitation ◽  
Ice Shelf ◽  
Long Wave ◽  
Hydroelastic Analysis

Abstract. The transient hydroelastic response of an ice shelf under long wave excitation is analysed by means of the finite element method. The simple model, presented in this work, is used for the simulation of the generated kinematic and stress fields in an ice shelf, when the latter interacts with a tsunami wave. The ice shelf, being of large length compared to its thickness, is modelled as an elastic Euler–Bernoulli beam, constrained at the grounding line. The hydrodynamic field is represented by the linearised shallow water equations. The numerical solution is based on the development of a special hydroelastic finite element for the system of governing of equations. Motivated by the 2011 Sulzberger Ice Shelf (SIS) calving event and its correlation with the Honshu Tsunami, the SIS stable configuration is studied. The extreme values of the bending moment distribution in both space and time are examined. Finally, the location of these extrema is investigated for different values of ice shelf thickness and tsunami wave length.

Long Wave-Length Buckling of Periodic Open-Cell Foams Subjected to Uniaxial Compression

2007 ◽  
Vol 345-346 ◽  
pp. 81-84
Author(s):  
Dai Okumura ◽  
Atsushi Okada ◽  
Nobutada Ohno
Keyword(s):  
Finite Element ◽  
Uniaxial Compression ◽  
Wave Length ◽  
Elastic Buckling ◽  
Element Analysis ◽  
Open Cell ◽  
Long Wavelength ◽  
Onset Condition ◽  
Long Wave ◽  
Open Cell Foams

In this study, the elastic buckling strength of cubic open-cell foams subjected to uniaxial compression is investigated using the homogenization framework developed by the present authors (Ohno et al., JMPS 2002; Okumura et al., JMPS 2004). First of all, based on the framework, the microscopic bifurcation and macroscopic instability of cubic open-cell foams are numerically analyzed by performing finite element analysis. It is thus shown that long wavelength buckling is the primary mode and occurs just after the onset of macroscopic instability. Then, a solution for predicting the stress of long wavelength buckling is analytically derived from the onset condition of macroscopic instability. The validity of this analytical solution is demonstrated by the finite element results.

The Evolution of Undular Bore in Coastal Zone: Effect of Bottom Slope, Friction and Special Topography

2019 ◽  
Vol 13 (05n06) ◽  
pp. 1941005
Author(s):  
Xi Zhao ◽  
Zhiyuan Ren ◽  
Hua Liu
Keyword(s):  
Tsunami Wave ◽  
Wave Length ◽  
Coastal Region ◽  
Wave Dispersion ◽  
Occurrence Time ◽  
Amplitude Wave ◽  
Undular Bore ◽  
Tsunami Waves ◽  
Long Wave ◽  
Continental Shelves

When tsunami waves propagate into shallow and gentle continental shelves, the effects of submarine topography and wave dispersion lead to the appearance of undular bore. This kind of wave is quite different from the initial tsunami wave in the waveform, and its amplitude is enhanced significantly. The undular bore will cause great and repeated runups on the beach, which brings larger destruction to the coastal region. In order to investigate the characteristics of the propagation of undular bore, this paper simulates the evolution from the sinusoidal long wave to the undular bore and analyzes the influencing factors. The beach slope has an important effect on the development of undular bores in terms of the undulation form, amplitude, wave length and occurrence time. The influence of bottom friction and submarine topography on the undulations and soliton fissions are discussed. These bottom conditions will lead to great change of the waveform and amplitude of undular bores.

Buckling Behavior of Tire Breaker Structure

1983 ◽  
Vol 11 (1) ◽  
pp. 3-19
Author(s):  
T. Akasaka ◽  
S. Yamazaki ◽  
K. Asano
Keyword(s):  
Elastic Foundation ◽  
Elastic Moduli ◽  
Wave Length ◽  
Bending Moment ◽  
Experimental Results ◽  
Automobile Tire ◽  
Buckling Behavior ◽  
Post Buckling ◽  
Steel Cord ◽  
Interlaminar Shear

Abstract The buckled wave length and the critical in-plane bending moment of laminated long composite strips of cord-reinforced rubber sheets on an elastic foundation is analyzed by Galerkin's method, with consideration of interlaminar shear deformation. An approximate formula for the wave length is given in terms of cord angle, elastic moduli of the constituent rubber and steel cord, and several structural dimensions. The calculated wave length for a 165SR13 automobile tire with steel breakers (belts) was very close to experimental results. An additional study was then conducted on the post-buckling behavior of a laminated biased composite beam on an elastic foundation. This beam is subjected to axial compression. The calculated relationship between the buckled wave rise and the compressive membrane force also agreed well with experimental results.

Finite Element Modeling of Self-Loosening of Bolted Joints

2004 ◽  
Author(s):  
Ming Zhang ◽  
Yanyao Jiang ◽  
Chu-Hwa Lee
Keyword(s):  
Finite Element ◽  
Contact Pressure ◽  
Bending Moment ◽  
Shear Loading ◽  
Transverse Load ◽  
Fe Model ◽  
Bolted Joint ◽  
Cyclic Bending ◽  
Second Stage ◽  
Cyclic Bending Moment

A three-dimensional finite element (FE) model with the consideration of the helix angle of the threads was developed to simulate the second stage self-loosening of a bolted joint. The second stage self-loosening refers to the graduate reduction in clamping force due to the back-off of the nut. The simulations were conducted for two plates jointed by a bolt and a nut and the joint was subjected to transverse or shear loading. An M12×1.75 bolt was used. The application of the preload was simulated by using an orthogonal temperature expansion method. FE simulations were conducted for several loading conditions with different preloads and relative displacements between the two clamped plates. It was found that due to the application of the cyclic transverse load, micro-slip occurred between the contacting surfaces of the engaged threads of the bolt and the nut. In addition, a cyclic bending moment was introduced on the bolted joint. The cyclic bending moment resulted in an oscillation of the contact pressure on the contacting surfaces of the engaged threads. The micro-slip between the engaged threads and the variation of the contact pressure were identified to be the major mechanisms responsible for the self-loosening of a bolted joint. Simplified finite element models were developed that confirmed the mechanisms discovered. The major self-loosening behavior of a bolted joint can be properly reproduced with the FE model developed. The results obtained agree quantitatively with the experimental observations.

Character Analysis of Balance and Imbalance of Varying Rigidity of Rigid Pile Composite Foundation under Seismic Load

2014 ◽  
Vol 1065-1069 ◽  
pp. 19-22
Author(s):  
Zhen Feng Wang ◽  
Ke Sheng Ma
Keyword(s):  
Finite Element ◽  
Bending Moment ◽  
Horizontal Displacement ◽  
Element Model ◽  
Composite Foundation ◽  
Seismic Load ◽  
Seismic Loads ◽  
Element Analysis ◽  
Rigid Pile ◽  
Rigid Pile Composite Foundation

Based on ABAQUS finite element analysis software simulation, the finite element model for dynamic analysis of rigid pile composite foundation and superstructure interaction system is established, which selects the two kinds of models, by simulating the soil dynamic constitutive model, selecting appropriate artificial boundary.The influence of rigid pile composite foundation on balance and imbalance of varying rigidity is analyzed under seismic loads. The result shows that the maximum bending moment and the horizontal displacement of the long pile is much greater than that of the short pile under seismic loads, the long pile of bending moment is larger in the position of stiffness change. By constrast, under the same economic condition, the aseismic performance of of rigid pile composite foundation on balance of varying rigidity is better than that of rigid pile composite foundation on imbalance of varying rigidity.

Elastic-Plastic Analysis of an Elbow With Axial Part-Through Internal Crack at Crown Under In-Plane Bending

2008 ◽  
Author(s):  
K. M. Prabhakaran ◽  
S. R. Bhate ◽  
V. Bhasin ◽  
A. K. Ghosh
Keyword(s):  
Finite Element ◽  
Crack Depth ◽  
Bending Moment ◽  
Internal Crack ◽  
J Integral ◽  
Finite Element Analyses ◽  
Integrity Assessment ◽  
Elastic Plastic ◽  
Axial Part ◽  
Plane Bending

Piping elbows under bending moment are vulnerable to cracking at crown. The structural integrity assessment requires evaluation of J-integral. The J-integral values for elbows with axial part-through internal crack at crown under in-plane bending moment are limited in open literature. This paper presents the J-integral results of a thick and thin, 90-degree, long radius elbow subjected to in-plane opening bending moment based on number of finite element analyses covering different crack configurations. The non-linear elastic-plastic finite element analyses were performed using WARP3D software. Both geometrical and material nonlinearity were considered in the study. The geometry considered were for Rm/t = 5, and 12 with ratio of crack depth to wall thickness, a/t = 0.15, 0.25, 0.5 and 0.75 and ratio of crack length to crack depth, 2c/a = 6, 8, 10 and 12.

Sign in / Sign up

Export Citation Format

Share Document