scholarly journals Study of the combined effects of data assimilation and grid nesting in ocean models – application to the Gulf of Lions

2006 ◽  
Vol 3 (3) ◽  
pp. 291-318
Author(s):  
L. Vandenbulcke ◽  
A. Barth ◽  
M. Rixen ◽  
A. Alvera-Azcárate ◽  
Z. Ben Bouallegue ◽  
...  

Abstract. Modern operational ocean forecasting systems routinely use data assimilation techniques in order to take observations into account in the hydrodynamic model. Moreover, as end users require higher and higher resolution predictions, especially in coastal zones, it is now common to run nested models, where the coastal model gets its open-sea boundary conditions from a low-resolution global model. This configuration is used in the ''Mediterranean Forecasting System: Towards environmental predictions'' (MFSTEP) project. A global model covering the whole Mediterranean Sea is run weekly, performing 1 week of hindcast and a 10-day forecast. Regional models, using different codes and covering different areas, then use this forecast to implement boundary conditions. Local models in turn use the regional model forecasts for their own boundary conditions. This nested system has proven to be a viable and efficient system to achieve high-resolution weekly forecasts. However, when observations are available in some coastal zone, it remains unclear whether it is better to assimilate them in the global or local model. We perform twin experiments and assimilate observations in the global or in the local model, or in both of them together. We show that, when interested in the local models forecast and provided the global model fields are approximately correct, the best results are obtained when assimilating observations in the local model.

Ocean Science ◽  
2006 ◽  
Vol 2 (2) ◽  
pp. 213-222 ◽  
Author(s):  
L. Vandenbulcke ◽  
A. Barth ◽  
M. Rixen ◽  
A. Alvera-Azcarate ◽  
Z. Ben Bouallegue ◽  
...  

Abstract. Modern operational ocean forecasting systems routinely use data assimilation techniques in order to take observations into account in the hydrodynamic model. Moreover, as end users require higher and higher resolution predictions, especially in coastal zones, it is now common to run nested models, where the coastal model gets its open-sea boundary conditions from a low-resolution global model. This configuration is used in the "Mediterranean Forecasting System: Towards environmental predictions" (MFSTEP) project. A global model covering the whole Mediterranean Sea is run weekly, performing 1 week of hindcast and a 10-day forecast. Regional models, using different codes and covering different areas, then use this forecast to implement boundary conditions. Local models in turn use the regional model forecasts for their own boundary conditions. This nested system has proven to be a viable and efficient system to achieve high-resolution weekly forecasts. However, when observations are available in some coastal zone, it remains unclear whether it is better to assimilate them in the global or local model. We perform twin experiments and assimilate observations in the global or in the local model, or in both of them together. We show that, when interested in the local models forecast and provided the global model fields are approximately correct, the best results are obtained when assimilating observations in the local model.


2007 ◽  
Vol 7 (3) ◽  
pp. 41-50 ◽  
Author(s):  
M. Kojić ◽  
N. Filipović ◽  
B. Stojanović ◽  
V. Ranković ◽  
M. Krstić ◽  
...  

The objectives of this study were to define the regional and local groundwater flow, and to give quantitative estimates of the groundwater dynamic parameters and of the available groundwater resources. To achieve these objectives, numerical tools are required to quantitatively model flow through porous saturated and unsaturated media. We have developed a general finite element (FE) model for underground water flow and specific algorithms for Ranney wells. Solutions for steady and unsteady conditions are obtained by using two basic models: global and local. The global model consists of 3D finite elements and 1D finite elements with the equivalent well permeability representing Ranney wells. The local models are generated around wells, using solutions for all quantities from 3D global model at a cylindrical surface which bounds the local model. The local model consists of a fine 3D FE mesh and 1D elements used to model each of the well screens. We developed a software for pre- and post-processing, Lizza, which can be used for easy modeling of complex engineering underground water flow problems with Ranney wells. The FE package PAK-P is used as the solver. This software can handle flow regions with general irregular boundaries. The flow region itself may be composed of layers of nonuniform soils having an arbitrary degree of local anisotropy. Flow can occur in the vertical plane, the horizontal plane, or in a three dimensional region exhibiting radial symmetry about the vertical axis. The water flow model includes constant or time-varying prescribed head and flux boundaries, as well as boundaries controlled by atmospheric conditions. At a soil surface, boundary conditions may change during the time evolution from prescribed flux to prescribed head type conditions (and vice versa). The model also include a seepage face boundary through which water leaves the saturated part of the flow domain, and free drainage boundary conditions. The results of modeling several real engineering projects (Belgrade Water Supply Center) are presented.


2005 ◽  
Author(s):  
Roger M. Samelson ◽  
John S. Allen ◽  
Gary D. Egbert ◽  
John C. Kindle ◽  
Chris Snyder

Author(s):  
Dinakar Muthiah ◽  
Alex Weekes ◽  
Oded Yacobi

AbstractIn their study of local models of Shimura varieties for totally ramified extensions, Pappas and Rapoport posed a conjecture about the reducedness of a certain subscheme of {n\times n} matrices. We give a positive answer to their conjecture in full generality. Our main ideas follow naturally from two of our previous works. The first is our proof of a conjecture of Kreiman, Lakshmibai, Magyar, and Weyman on the equations defining type A affine Grassmannians. The second is the work of the first two authors and Kamnitzer on affine Grassmannian slices and their reduced scheme structure. We also present a version of our argument that is almost completely elementary: the only non-elementary ingredient is the Frobenius splitting of Schubert varieties.


2014 ◽  
Vol 18 (suppl.1) ◽  
pp. 59-72 ◽  
Author(s):  
Hasan Nagiar ◽  
Tasko Maneski ◽  
Vesna Milosevic-Mitic ◽  
Branka Gacesa ◽  
Nina Andjelic

Membrane walls are very important structural parts of water-tube boiler construction. Based on their specific geometry, one special type of finite element was defined to help model the global boiler construction. That is the element of reduced orthotropic plate with two thicknesses and two elasticity matrixes, for membrane and bending load separately. A global model of the boiler construction showed that the high value of stress is concentrated in plates of the buckstay system in boiler corners. Validation of the new finite element was done on the local model of the part of membrane wall and buckstay. A very precise model of tubes and flanges was compared to the model formed on the element of a reduced orthotropic plate. Pressure and thermal loads were discussed. Obtained results indicated that the defined finite element was quite favorable in the design and reconstruction of the boiler substructures such as a buckstay system.


2012 ◽  
Vol 182-183 ◽  
pp. 1060-1064
Author(s):  
Jing Zeng ◽  
Jun Wang ◽  
Jin Yu Guo

A mutli-model modeling method based on local model is given. The modeling idea is firstly to find some data matching with the current working point from vast historical system input-output datasets, and in this paper, we give a new method of choose data information based on similarity of vector which improve the accuracy of data greatly. Secondly to choose the weight and optimum bandwidth then develop a local model using local polynomial fitting algorithm. With the change of working points, multiple local models are built. The effectiveness of the proposed method is demonstrated by simulation results.


2010 ◽  
Author(s):  
Y. P. Yang ◽  
H. Castner ◽  
N. Kapustka

Two distortion modeling methods, mapping plastic strain and lump-pass modeling, were developed and validated for predicting distortion on large welded structures to reduce the computation time. The mapping plastic-strain method requires two kinds of models, local models and a global model. The local models are analyzed to predict plastic strains and the global model is analyzed by mapping the plastic strains to predict distortions. The lump-pass modeling method includes two kinds of analyses: a thermal analysis and a thermomechanical analysis. The thermal analysis is conducted to predict temperature history. The thermomechanical analysis is performed to predict distortion by inputting the predicted temperature history.


2010 ◽  
Vol 389 (23) ◽  
pp. 5530-5537 ◽  
Author(s):  
A.A. Roohi ◽  
A.H. Shirazi ◽  
A. Kargaran ◽  
G.R. Jafari

Sign in / Sign up

Export Citation Format

Share Document