scholarly journals Volcanological aspects of the northwest region of Paraná continental flood basalts (Brazil)

Solid Earth ◽  
2015 ◽  
Vol 6 (1) ◽  
pp. 227-241 ◽  
Author(s):  
F. Braz Machado ◽  
E. Reis Viana Rocha-Júnior ◽  
L. Soares Marques ◽  
A. J. Ranalli Nardy

Abstract. There has been little research on volcanological aspects of Paraná continental flood basalts (PCFBs), and all investigations have mainly been concentrated on the internal portions of the lava flows. Thus, this study describes for the first time morphological aspects of lava flows and structural characteristics caused by lava–sediment interaction in the northwestern PCFB province (NW-PCFB). Early Cretaceous (134 to 132 Ma) tholeiitic rocks of the PCFB were emplaced on a large intracratonic Paleozoic sedimentary basin (Paraná Basin), mainly covering dry eolian sandstones (Botucatu Formation). As this sedimentary unit is overlain by the basic lava flows of the PCFB, the interaction of lavas and unconsolidated sediments resulted in the generation of fluidal peperites. This aspect is significant because it shows that restricted wet environments should have existed in the Botucatu desert. The peperite zones of the NW-PCFB are associated with compound pahoehoe-type (P-type) flows and are always related to the first volcanic pulses. These flows have dispersed vesicles and sand-filled cracks in their base and top borders, as well as the presence of interlayered sandstones with irregular contacts and varied thicknesses. It is remarkable that, to the best of current knowledge, only in this area of the whole PCFB did the volcanic activity start with low-Ti basalt flows of Ribeira type (TiO2 < 2.3 wt%), which are scarce in the province.

2007 ◽  
Vol 159 (4) ◽  
pp. 343-354 ◽  
Author(s):  
Breno L. Waichel ◽  
Evandro F. de Lima ◽  
Carlos A. Sommer ◽  
Romulo Lubachesky

2014 ◽  
Vol 6 (2) ◽  
pp. 2215-2259 ◽  
Author(s):  
F. B. Machado ◽  
E. R. Viana Rocha-Júnior ◽  
A. J. Ranalli Nardy ◽  
L. Soares Marques

Abstract. The early Cretaceous Paraná Continental Flood Basalts (PCFB) is considered as one of the largest volcanic provinces in the world. In Brazil, it completes the last sequence of the sedimentary Paraná Basin (Serra Geral Fm.). The geological unit is contemporary to desert sandstones of Botucatu Fm. and precedes the continental sediments of the Bauru Basin. This Large Igneous Province (LIP) is divided into different types of geochemical magmas which basically are based on TiO2 content (higher – HTi or lower LTi than 2 wt.% in TiO2) and incompatible trace elements ratio. Therefore, we studied the magma LTi (TiO2 < 2.0 wt.%), denominated Ribeira which occurs in the northwestern portion of PCFP which is poorly researched mainly in volcanological and geochemical aspects. This basaltic magma, a short expression in PCFB, occurs in the form of multiple pahoehoe flows with thicknesses ranging from 1.5 to 30 m in compound type flows under low surface slope. Peperites zones are common when associated with the first flows, and sand-filled cracks in the lower and upper edges at all pahoehoe levels when in contact with the sediment. Upward these first sequences of interactions with sediment, on the inside direction basin, simple pahoehoe flows occur being associated with Pitanga magma type (HTi, with TiO2 > 2.0 wt.%). Based on rheology data considering anhydrous environment and the composition of plagioclase (An(42–67)) and clinopyroxene (Wo(30–40)En(34–46)Fs(17–32)) showed that the LTi magma is hotter than HTi, with temperatures that range from 1069 °C to 1248 °C while for the second range from 1020 °C to 1201 °C.


GEODYNAMICS ◽  
2021 ◽  
Vol 1(30)2021 (1(30)) ◽  
pp. 36-47
Author(s):  
Іhor Naumko ◽  
◽  
N. V. Batsevych ◽  
Yu. I. Fedoryshyn ◽  
Myroslav Pavlyuk ◽  
...  

Purpose. The main purpose of this paper is to investigate the peculiarities of the spatial distribution of thickness and paleorelief of continental flood basalts of Luchychi stratum of Ratne suite of the Ediacaran of the Ratne–Kamin-Kashyrskyi Area in Western Volyn using maps of the thickness and relief of the paleosurface. The study also focuses on correlation between the specified parameters of the stratum and the spatial change of concentrations of native mineralization and its localization relative to the roof (sole) of the stratum. Method. The research applies a number of methods, including field geological surveys; petrography of basalts, structural features (degree of crystallization of mesostasis, structural position of minerals and, in particular, copper, ratio of globular formations and minerals that surround them, relationship between globules), macro- and microtextural features of rocks; geochemical research: determination of the content of the main chemical components of the rocks by the method of gross chemical analysis and copper content; geological and morphostructural studies: construction of a map of paleorelief and thickness of continental flood basalt of the Luchichiv stratum (according to the section of wells). Results. The constructed maps of the thickness and paleo surface of the Luchychi stratum show the spatial variability of the basalt thickness and the reflection of the effective tectonic situation on its paleo surface, which can be "read" by relief elements. It is established that high copper content in basalts is spatially confined to areas of maximum thickness and shifted vertically to the near-roof and, partially, plantar parts of the basalt thickness, and the degree of their crystallization increases in the direction of the inner parts of bodies. This situation with the spatial arrangement of native mineralization indicates the existence within these areas of local isolated thermostated systems. They evolved in their internal parts in conditions close to the intrusive ones (relatively slow decrease in melt temperature, crystallization of rock differences almost devoid of volcanic glass – dolerite-basalts with the transition to dolerites in the central part). Such physicochemical conditions caused long-term migration of gaseous, gaseous-liquid and liquid fluids, providing concomitant extraction, concentration, transfer and deposition not only of native copper, but also a number of petrogenic oxides (alkalis, iron, partially calcium, silicium). The latter subsequently formed a number of low-temperature minerals, the most common of which are zeolites, calcite, and iron compounds. In areas with small and minimum thickness of basalts, the above facts are observed in a reduced form, and in some places are virtually absent. The research has established the complete absence of signs of hydrothermal copper ore mineralization. The latter indicates the lack of evidence about the formation of native mineralization of the hydrothermal type. We provide the geological and petrogeochemical facts that give grounds to consider the scenario of the process of formation of native copper mineralization in relation to the fluid-liquidation hypothesis, earlier developed and proposed by the authors. Scientific novelty. For the first time, the study made it possible to construct maps of the thickness and relief of the paleo surface of the basalts of the Luchychi strata of the Ratne–Kamin-Kashyrskyi area of Western Volyn. Based on the actual material it is shown that the vertical distribution and localization of native mineralization within basaltic bodies are naturally related to their thickness. The value of native copper is directly related to body thickness, reaching a maximum in areas with maximum thickness and background values at the minimum thickness. Practical significance. For the first time, geological, petrographic, geological and morphostructural data were compared with the copper content in basalts of the Luchichi stratum. The proposed approach can be used by geological production organizations in conducting exploration work to prepare promising areas for exploration of the North-Hirnyky and Rafalivka ore fields (ore nodes) within the Ratne Horst anticline. The obtained original material can be distributed as a new method of native mineralization search in other areas of the continental flood basalts distribution.


Author(s):  
Mohamad Hossein Pourhanifeh ◽  
Kazem Abbaszadeh-Goudarzi ◽  
Mohammad Goodarzi ◽  
Sara G.M. Piccirillo ◽  
Alimohammad Shafiee ◽  
...  

: Melanoma is the most life-threatening and aggressive class of skin malignancies. The incidence of melanoma has steadily increased. Metastatic melanoma is greatly resistant to standard anti-melanomatreatments such as chemotherapy, and 5-year survival rate of cases with melanoma who have metastatic form of disease is less than 10%. The contributing role of apoptosis, angiogenesis and autophagy in the pathophysiology of melanoma has been previously demonstrated. Thus, it is extremely urgent to search for complementary therapeutic approachesthat couldenhance the quality of life of subjects and reduce treatment resistance and adverse effects. Resveratrol, known as a polyphenol component present in grapes and some plants, has anti-cancer properties due to its function as an apoptosis inducer in tumor cells, and anti-angiogenic agent to prevent metastasis. However, more clinical trials should be conducted to prove resveratrol efficacy. : Herein, for first time, we summarize current knowledge of anti-cancerous activities of resveratrol in melanoma.


Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 451
Author(s):  
Marta Kubiak ◽  
Janine Mayer ◽  
Ingo Kampen ◽  
Carsten Schilde ◽  
Rebekka Biedendieck

In biocatalytic processes, the use of free enzymes is often limited due to the lack of long-term stability and reusability. To counteract this, enzymes can be crystallized and then immobilized, generating cross-linked enzyme crystals (CLECs). As mechanical stability and activity of CLECs are crucial, different penicillin G acylases (PGAs) from Gram-positive organisms have proven to be promising candidates for industrial production of new semisynthetic antibiotics, which can be crystallized and cross-linked to characterize the resulting CLECs regarding their mechanical and catalytic properties. The greatest hardness and Young’s modulus determined by indentation with an atomic force microscope were observed for CLECs of Bacillus species FJAT-PGA CLECs (26 MPa/1450 MPa), followed by BmPGA (Priestia megaterium PGA, 23 MPa/1170 MPa) and BtPGA CLECs (Bacillus thermotolerans PGA, 11 MPa/614 MPa). In addition, FJAT- and BtPGA CLECs showed up to 20-fold higher volumetric activities compared to BmPGA CLECs. Correlation to structural characteristics indicated that a high solvent content and low number of cross-linking residues might lead to reduced stability. Furthermore, activity seems to be restricted by small water channels due to severe diffusion limitations. To the best of our knowledge, we show for the first time in this study that the entire process chain for the characterization of diverse industrially relevant enzymes can be performed at the microliter scale to discover the most important relationships and limitations.


2009 ◽  
Vol 50 (7) ◽  
pp. 1377-1403 ◽  
Author(s):  
L. Beccaluva ◽  
G. Bianchini ◽  
C. Natali ◽  
F. Siena

2008 ◽  
Vol 600-603 ◽  
pp. 1187-1190 ◽  
Author(s):  
Q. Jon Zhang ◽  
Charlotte Jonas ◽  
Joseph J. Sumakeris ◽  
Anant K. Agarwal ◽  
John W. Palmour

DC characteristics of 4H-SiC p-channel IGBTs capable of blocking -12 kV and conducting -0.4 A (-100 A/cm2) at a forward voltage of -5.2 V at 25°C are demonstrated for the first time. A record low differential on-resistance of 14 mW×cm2 was achieved with a gate bias of -20 V indicating a strong conductivity modulation in the p-type drift region. A moderately doped current enhancement layer grown on the lightly doped drift layer effectively reduces the JFET resistance while maintains a high carrier lifetime for conductivity modulation. A hole MOS channel mobility of 12.5 cm2/V-s at -20 V of gate bias was measured with a MOS threshold voltage of -5.8 V. The blocking voltage of -12 kV was achieved by Junction Termination Extension (JTE).


2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Frederik Barbarino ◽  
Lucas Wäschenbach ◽  
Virginia Cavalho-Lemos ◽  
Melissa Dillenberger ◽  
Katja Becker ◽  
...  

AbstractThe mechanical properties of red blood cells (RBCs) are fundamental for their physiological role as gas transporters. RBC flexibility and elasticity allow them to survive the hemodynamic changes in the different regions of the vascular tree, to dynamically contribute to the flow thereby decreasing vascular resistance, and to deform during the passage through narrower vessels. RBC mechanoproperties are conferred mainly by the structural characteristics of their cytoskeleton, which consists predominantly of a spectrin scaffold connected to the membrane via nodes of actin, ankyrin and adducin. Changes in redox state and treatment with thiol-targeting molecules decrease the deformability of RBCs and affect the structure and stability of the spectrin cytoskeleton, indicating that the spectrin cytoskeleton may contain redox switches. In this perspective review, we revise current knowledge about the structural and functional characterization of spectrin cysteine redox switches and discuss the current lines of research aiming to understand the role of redox regulation on RBC mechanical properties. These studies may provide novel functional targets to modulate RBC function, blood viscosity and flow, and tissue perfusion in disease conditions.


1996 ◽  
Vol 450 ◽  
Author(s):  
C. A. Wang ◽  
G. W. Turner ◽  
M. J. Manfra ◽  
H. K. Choi ◽  
D. L. Spears

ABSTRACTGai1−xInxASySb1-y (0.06 < x < 0.18, 0.05 < y < 0.14) epilayers were grown lattice-matched to GaSb substrates by low-pressure organometallic vapor phase epitaxy (OMVPE) using triethylgallium, trimethylindium, tertiarybutylarsine, and trimethylantimony. These epilayers have a mirror-like surface morphology, and exhibit room temperature photoluminescence (PL) with peak emission wavelengths (λP,300K) out to 2.4 μm. 4K PL spectra have a full width at half-maximum of 11 meV or less for λP,4K < 2.1 μm (λP,300K = 2.3 μm). Nominally undoped layers are p-type with typical 300K hole concentration of 9 × 1015 cm−3 and mobility ∼ 450 to 580 cm2/V-s for layers grown at 575°C. Doping studies are reported for the first time for GalnAsSb layers doped n type with diethyltellurium and p type with dimethylzinc. Test diodes of p-GalnAsSb/n-GaSb have an ideality factor that ranges from 1.1 to 1.3. A comparison of electrical, optical, and structural properties of epilayers grown by molecular beam epitaxy indicates OMVPE-grown layers are of comparable quality.


Sign in / Sign up

Export Citation Format

Share Document