scholarly journals Green Synthesis and Characterization of Crystalline CuO Nanoparticles using Aqueous Mentha Piperita L. Leaf Extract

2021 ◽  
Vol 20 (2) ◽  
pp. 1-6
Author(s):  
Fatma A. Shtewi ◽  
Wedad M. Al-Adiwish ◽  
Hamid A. Alqamoudy ◽  
Awatif A. Tarroush
Keyword(s):  
Copper Oxide ◽  
Green Synthesis ◽  
Leaf Extract ◽  
Copper Oxide Nanoparticles ◽  
Cuo Nanoparticles ◽  
Mentha Piperita ◽  
Synthesis Process ◽  
Oxide Nanoparticles ◽  
Cuo Nps ◽  
Tauc Plot

Copper oxide nanoparticles are essential technology materials that are utilized as catalysts in the chemical industry, as well as in photonic and electronic devices and medical applications. Due to their applications in advanced technologies, we have concentrated on the production of CuO nanoparticles using enhanced, cost-effective, and environmentally friendly synthetic techniques. In this paper, we have presented a green synthesis technique to successfully synthesis copper oxide nanoparticles (CuO NPs) utilizing copper (II) sulfate pentahydrate (CuSO4.5H2O) as precursor salt and Mentha Piperita leaf extract as a reducing and stabilizing agent during the synthesis process. The precursor salt solution and reducing agent were mixed in a 1:1 volume ratio at 50 °C. The CuO NPs synthesized were confirmed by the characteristics Surface Plasmon Resonance (SPR) peak in the UV-visible region. Also, the optical direct band gap energy of the CuO NPs determined from the Tauc plot was 3.26 eV. The FTIR spectrum analysis confirmed existence of functional groups of polyphenols from Mentha piperita L. leaf extract, which are responsible for the reduction of Cu2+ ions and effective stabilization of CuO NPs. All the peaks observed in the XRD pattern revealed the production of CuO NPs having monoclinic structure with an average crystallite size of 42.51 nm. The surface morphology of the CuO nanoparticles was detected using SEM analysis. Further, the synthesis mechanism of CuO NPs has also been investigated.

scholarly journals Preparation of green synthesized copper oxide nanoparticles for efficient removal of lead from wastewaters

2021 ◽  
Author(s):  
Amir Zarrabi ◽  
Reza Ghasemi-Fasaei
Keyword(s):  
Copper Oxide ◽  
Green Synthesis ◽  
Leaf Extract ◽  
Metal Salt ◽  
Plant Cover ◽  
Equilibrium Concentration ◽  
Copper Oxide Nanoparticles ◽  
Polluted Water ◽  
Oxide Nanoparticles ◽  
Cuo Nps

Abstract Green synthesis is a clean and eco-friendly process in which metal nanoparticles can be produced via reaction between a metal salt solution and plant organ extract. In present study, three copper oxide nanoparticles were synthesized using green synthesis processes from the leaf extracts of selected plants as abundant plant cover in the study area including astragalus (Astragalus membranaceus), rosemary (Salvia rosmarinus) and mallow (Malva sylvestris). The effectiveness of three green synthesized nanoparticles in the adsorption of lead ions from a polluted water was studied under laboratory conditions. According to the results, the removal efficiencies of the copper oxide nanoparticles synthesized from astragalus (A-CuO-NPs), rosemary (R-CuO-NPs) and mallow leaf extract (M-CuO-NPs) especially at the highest initial concentration of Pb (1.5 mM) were 88.4 %, 84.9 % and 69.6 %, respectively. Most probably due the smooth morphology and more uniform configuration of the M-CuO-NPs, the changes between equilibrium adsorption (qe) and equilibrium concentration (Ce) were more regular than those of the A-CuO-NPs and R-CuO-NPs. Accordingly the best fitted data to Langmuir and Freundlich isotherms were observed in the adsorption of Pb onto the M-CuO-NPs. Despite the lowest removal efficiency of the M-CuO-NPs, with the equal volumes of each leaf extract and CuSO4.5H2O solution (20 mM), the most produced dry weight was observed for these nanoparticles (4.3 g per 100 mL of leaf extract). According to the results reported herein, the copper oxide nanoparticles synthesized from different plant covers are efficient adsorption agents for Pb from wastewaters.

scholarly journals Green Synthesis of Copper Oxide Nanoparticles Using Protein Fractions from an Aqueous Extract of Brown Algae Macrocystis pyrifera

Processes ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 78
Author(s):  
Karla Araya-Castro ◽  
Tzu-Chiao Chao ◽  
Benjamín Durán-Vinet ◽  
Carla Cisternas ◽  
Gustavo Ciudad ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Copper Oxide ◽  
Green Synthesis ◽  
Aqueous Extract ◽  
Brown Algae ◽  
Copper Oxide Nanoparticles ◽  
Macrocystis Pyrifera ◽  
Protein Fractions ◽  
Oxide Nanoparticles ◽  
Cuo Nps

Amongst different living organisms studied as potential candidates for the green synthesis of copper nanoparticles, algal biomass is presented as a novel and easy-to-handle method. However, the role of specific biomolecules and their contribution as reductant and capping agents has not yet been described. This contribution reports a green synthesis method to obtain copper oxide nanoparticles (CuO-NPs) using separated protein fractions from an aqueous extract of brown algae Macrocystis pyrifera through size exclusion chromatography (HPLC-SEC). Proteins were detected by a UV/VIS diode array, time-based fraction collection was carried out, and each collected fraction was used to evaluate the synthesis of CuO-NPs. The characterization of CuO-NPs was evaluated by Dynamic Light Scattering (DLS), Z-potential, Fourier Transform Infrared (FTIR), Transmission Electron Microscope (TEM) equipped with Energy Dispersive X-ray Spectroscopy (EDS) detector. Low Molecular Weight (LMW) and High Molecular Weight (HMW) protein fractions were able to synthesize spherical CuO-NPs. TEM images showed that the metallic core present in the observed samples ranged from 2 to 50 nm in diameter, with spherical nanostructures present in all containing protein samples. FTIR measurements showed functional groups from proteins having a pivotal role in the reduction and stabilization of the nanoparticles. The highly negative zeta potential average values from obtained nanoparticles suggest high stability, expanding the range of possible applications. This facile and novel protein-assisted method for the green synthesis of CuO-NPs may also provide a suitable tool to synthesize other nanoparticles that have different application areas.

Green synthesis of copper oxide nanoparticles using Punica granatum leaf extract applied to the removal of methylene blue

2019 ◽  
Vol 257 ◽  
pp. 126685 ◽  
Author(s):  
Taynara Basso Vidovix ◽  
Heloise Beatriz Quesada ◽  
Eduarda Freitas Diogo Januário ◽  
Rosângela Bergamasco ◽  
Angélica Marquetotti Salcedo Vieira
Keyword(s):  
Methylene Blue ◽  
Copper Oxide ◽  
Green Synthesis ◽  
Leaf Extract ◽  
Punica Granatum ◽  
Copper Oxide Nanoparticles ◽  
Oxide Nanoparticles

scholarly journals Green Synthesis of Copper Oxide Nanoparticles Using Aerva javanica Leaf Extract and Their Characterization and Investigation of In Vitro Antimicrobial Potential and Cytotoxic Activities

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Fozia Amin ◽  
Fozia ◽  
Baharullah Khattak ◽  
Amal Alotaibi ◽  
Muhammad Qasim ◽  
...  
Keyword(s):  
Copper Oxide ◽  
Fungal Pathogens ◽  
Leaf Extract ◽  
Antimicrobial Activities ◽  
Copper Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Antimicrobial Potential ◽  
Cuo Nps

The development of green technology is creating great interest for researchers towards low-cost and environmentally friendly methods for the synthesis of nanoparticles. Copper oxide nanoparticles (CuO-NPs) attracted many researchers due to their electric, catalytic, optical, textile, photonic, monofluid, and pharmacological activities that depend on the shape and size of the nanoparticles. This investigation aims copper oxide nanoparticles synthesis using Aerva javanica plant leaf extract. Characterization of copper oxide nanoparticles synthesized by green route was performed by three different techniques: X-Ray Diffraction (XRD), Fourier Transform Infrared (FTIR) Spectroscopy, and Scanning Electron Microscopy (SEM). X-ray diffraction (XRD) reveals the crystalline morphology of CuO-NPs and the average crystal size obtained is 15 nm. SEM images showed the spherical nature of the particles and size is lying in the 15–23 nm range. FTIR analysis confirms the functional groups of active components present in the extract which are responsible for reducing and capping agents for the synthesis of CuO-NPs. The synthesized CuO-NPs were studied for their antimicrobial potential against different bacterial as well as fungal pathogens. The results indicated that CuO-NPs show maximum antimicrobial activities against all the selected bacterial and fungal pathogens. Antimicrobial activities of copper oxide nanoparticles were compared with standard drugs Norfloxacin and amphotericin B antibiotics. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of copper oxide nanoparticles were 128 μg/mL against all selected bacterial pathogens. MIC of fungus and minimum fungicidal concentration (MFC) of CuO-NPs were 160 μg/mL. Thus, CuO-NPs can be utilized as a broad-spectrum antimicrobial agent. The cytotoxic activity of the synthesized CuO-NPs suggested that toxicity was negligible at concentrations below 60 μg/mL.

Green Synthesis of Copper Oxide Nanoparticles Using Aloe vera Leaf Extract and Its Antibacterial Activity Against Fish Bacterial Pathogens

2015 ◽  
Vol 5 (3) ◽  
pp. 135-139 ◽  
Author(s):  
P. P. N. Vijay Kumar ◽  
U. Shameem ◽  
Pratap Kollu ◽  
R. L. Kalyani ◽  
S. V. N. Pammi
Keyword(s):  
Antibacterial Activity ◽  
Copper Oxide ◽  
Green Synthesis ◽  
Leaf Extract ◽  
Bacterial Pathogens ◽  
Aloe Vera ◽  
Copper Oxide Nanoparticles ◽  
Oxide Nanoparticles

scholarly journals Green Synthesis of Copper Oxide Nanoparticles from Catharanthus Roseus Plant Leaf Extract and Its Investigation

2021 ◽  
Vol 13 (1) ◽  
pp. 01014-1-01014-5
Author(s):  
K. Sofiya Dayana ◽  
◽  
R. Jothimani ◽  
S. C. Vella Durai ◽  
◽  
...  
Keyword(s):  
Copper Oxide ◽  
Green Synthesis ◽  
Catharanthus Roseus ◽  
Leaf Extract ◽  
Copper Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
Plant Leaf ◽  
Plant Leaf Extract

scholarly journals Green Synthesis and Evaluation of Copper Oxide Nanoparticles using Fig Leaves and their Antifungal and Antibacterial Activities

2020 ◽  
Vol 10 (03) ◽  
pp. 378-382
Author(s):  
Jenan Hussien Taha ◽  
Nada Khudair Abbas ◽  
Azhar A. F. Al-Attraqchi
Keyword(s):  
Copper Oxide ◽  
Green Synthesis ◽  
Antibacterial Activities ◽  
Copper Oxide Nanoparticles ◽  
Morphological Properties ◽  
Oxide Nanoparticles ◽  
Bacterial Strains ◽  
Tem Analysis ◽  
Cuo Nps ◽  
Transmission Electron

In this article, a simple new technique for the green synthesis of copper oxide nanoparticles (CuO NPs) using peroxidases oxidoreductases (POX) enzyme extracted from fig leaves for antifungal and antibacterial activities has been reported. Subsequently, a comprehensive investigation of the structural, optical, and morphological properties of the synthesized CuO NPs was elucidated, using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Electrodiagnostic (EDX), atomic force microscopy (AFM), and transmission electron microscopy (TEM) analysis techniques. Specifically, the resultant nanoparticles are spherical with a diameter ranging from 28–68. CuO NPs were further tested for their antifungal activity against Candida and Aspergillus species, while the antibacterial activity was screened in contradiction of pathogenic bacterial strains namely gram-positive Staphylococcus aureus and gram-negative Asinobacterial species. The present study reveals a convenient use of POX fig leaves extract as fuel, for the well-organized synthesis of CuO NPs via green synthesis technique to acquire considerably active antifungal and antibacterial materials.

Sign in / Sign up

Export Citation Format

Share Document