scholarly journals Green Synthesis of Copper Oxide Nanoparticles Using Aerva javanica Leaf Extract and Their Characterization and Investigation of In Vitro Antimicrobial Potential and Cytotoxic Activities

2021 ◽  
Vol 2021 ◽  
pp. 1-12
Author(s):  
Fozia Amin ◽  
Fozia ◽  
Baharullah Khattak ◽  
Amal Alotaibi ◽  
Muhammad Qasim ◽  
...  
Keyword(s):  
Copper Oxide ◽  
Fungal Pathogens ◽  
Leaf Extract ◽  
Antimicrobial Activities ◽  
Copper Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Antimicrobial Potential ◽  
Cuo Nps

The development of green technology is creating great interest for researchers towards low-cost and environmentally friendly methods for the synthesis of nanoparticles. Copper oxide nanoparticles (CuO-NPs) attracted many researchers due to their electric, catalytic, optical, textile, photonic, monofluid, and pharmacological activities that depend on the shape and size of the nanoparticles. This investigation aims copper oxide nanoparticles synthesis using Aerva javanica plant leaf extract. Characterization of copper oxide nanoparticles synthesized by green route was performed by three different techniques: X-Ray Diffraction (XRD), Fourier Transform Infrared (FTIR) Spectroscopy, and Scanning Electron Microscopy (SEM). X-ray diffraction (XRD) reveals the crystalline morphology of CuO-NPs and the average crystal size obtained is 15 nm. SEM images showed the spherical nature of the particles and size is lying in the 15–23 nm range. FTIR analysis confirms the functional groups of active components present in the extract which are responsible for reducing and capping agents for the synthesis of CuO-NPs. The synthesized CuO-NPs were studied for their antimicrobial potential against different bacterial as well as fungal pathogens. The results indicated that CuO-NPs show maximum antimicrobial activities against all the selected bacterial and fungal pathogens. Antimicrobial activities of copper oxide nanoparticles were compared with standard drugs Norfloxacin and amphotericin B antibiotics. Minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of copper oxide nanoparticles were 128 μg/mL against all selected bacterial pathogens. MIC of fungus and minimum fungicidal concentration (MFC) of CuO-NPs were 160 μg/mL. Thus, CuO-NPs can be utilized as a broad-spectrum antimicrobial agent. The cytotoxic activity of the synthesized CuO-NPs suggested that toxicity was negligible at concentrations below 60 μg/mL.

scholarly journals Synthesis, Characterization, and Antimicrobial Activity of Copper Oxide Nanoparticles

2014 ◽  
Vol 2014 ◽  
pp. 1-4 ◽  
Author(s):  
Maqusood Ahamed ◽  
Hisham A. Alhadlaq ◽  
M. A. Majeed Khan ◽  
Ponmurugan Karuppiah ◽  
Naif A. Al-Dhabi
Keyword(s):  
Antimicrobial Activity ◽  
Electron Microscope ◽  
Copper Oxide ◽  
Field Emission ◽  
Copper Oxide Nanoparticles ◽  
Klebsiella Pneumonia ◽  
Oxide Nanoparticles ◽  
Xrd Pattern ◽  
X Ray ◽  
Cuo Nps

We studied the structural and antimicrobial properties of copper oxide nanoparticles (CuO NPs) synthesized by a very simple precipitation technique. Copper (II) acetate was used as a precursor and sodium hydroxide as a reducing agent. X-ray diffraction patter (XRD) pattern showed the crystalline nature of CuO NPs. Field emission scanning electron microscope (FESEM) and field emission transmission electron microscope (FETEM) demonstrated the morphology of CuO NPs. The average diameter of CuO NPs calculated by TEM and XRD was around 23 nm. Energy dispersive X-ray spectroscopy (EDS) spectrum and XRD pattern suggested that prepared CuO NPs were highly pure. CuO NPs showed excellent antimicrobial activity against various bacterial strains (Escherichia coli,Pseudomonas aeruginosa,Klebsiella pneumonia,Enterococcus faecalis,Shigella flexneri,Salmonella typhimurium,Proteus vulgaris,andStaphylococcus aureus). Moreover,E. coliandE. faecalisexhibited the highest sensitivity to CuO NPs whileK. pneumoniawas the least sensitive. Possible mechanisms of antimicrobial activity of CuO NPs should be further investigated.

scholarly journals Green Synthesis and Characterization of Crystalline CuO Nanoparticles using Aqueous Mentha Piperita L. Leaf Extract

2021 ◽  
Vol 20 (2) ◽  
pp. 1-6
Author(s):  
Fatma A. Shtewi ◽  
Wedad M. Al-Adiwish ◽  
Hamid A. Alqamoudy ◽  
Awatif A. Tarroush
Keyword(s):  
Copper Oxide ◽  
Green Synthesis ◽  
Leaf Extract ◽  
Copper Oxide Nanoparticles ◽  
Cuo Nanoparticles ◽  
Mentha Piperita ◽  
Synthesis Process ◽  
Oxide Nanoparticles ◽  
Cuo Nps ◽  
Tauc Plot

Copper oxide nanoparticles are essential technology materials that are utilized as catalysts in the chemical industry, as well as in photonic and electronic devices and medical applications. Due to their applications in advanced technologies, we have concentrated on the production of CuO nanoparticles using enhanced, cost-effective, and environmentally friendly synthetic techniques. In this paper, we have presented a green synthesis technique to successfully synthesis copper oxide nanoparticles (CuO NPs) utilizing copper (II) sulfate pentahydrate (CuSO4.5H2O) as precursor salt and Mentha Piperita leaf extract as a reducing and stabilizing agent during the synthesis process. The precursor salt solution and reducing agent were mixed in a 1:1 volume ratio at 50 °C. The CuO NPs synthesized were confirmed by the characteristics Surface Plasmon Resonance (SPR) peak in the UV-visible region. Also, the optical direct band gap energy of the CuO NPs determined from the Tauc plot was 3.26 eV. The FTIR spectrum analysis confirmed existence of functional groups of polyphenols from Mentha piperita L. leaf extract, which are responsible for the reduction of Cu2+ ions and effective stabilization of CuO NPs. All the peaks observed in the XRD pattern revealed the production of CuO NPs having monoclinic structure with an average crystallite size of 42.51 nm. The surface morphology of the CuO nanoparticles was detected using SEM analysis. Further, the synthesis mechanism of CuO NPs has also been investigated.

Biosynthesis of Copper Oxide Nanoparticles Using Lactobacillus casei Subsp. Casei and its Anticancer and Antibacterial Activities

2020 ◽  
Vol 16 (1) ◽  
pp. 101-111 ◽  
Author(s):  
Mehri Kouhkan ◽  
Parinaz Ahangar ◽  
Leila Ashrafi Babaganjeh ◽  
Maryam Allahyari-Devin
Keyword(s):  
Copper Oxide ◽  
Cancer Cells ◽  
Lactobacillus Casei ◽  
Copper Oxide Nanoparticles ◽  
Oxide Nanoparticles ◽  
No Production ◽  
Cytotoxic Effects ◽  
Gram Negative ◽  
X Ray ◽  
Cuo Nps

Background:The present study reveals the synthesis of copper oxide nanoparticles (CuO NPs) by probiotic bacteria (Lactobacillus casei subsp. casei) and demonstrates the cytotoxic effects of these nanoparticles against gram negative and positive bacteria and cancer cell lines.Methods:The CuO NPs are biosynthesized from Lactobacillus casei subsp. casei (L. casei) in an eco-friendly and cost-effective process. These nanoparticles are characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffractometer (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) and transmittance electron microscope (TEM) analysis. The antibacterial activity is examined by Well-diffusion, minimum inhibitory concentrations (MIC) and minimum bactericidal concentrations (MBC) assays using Broth microdilution. Anticancer effects of these nanoparticles are evaluated by methyl thiazolyl diphenyl-tetrazolium bromide (MTT) assay and Griess test.Results:Our results confirm the biosynthesis of CuO NPs from L. casei. Antibacterial assays demonstrate that treatment of gram-negative and gram-positive bacteria with CuO NPs inhibits the growth of these bacteria. Furthermore, the cell viability of human cancer cells decreases while treated by nanoparticles. These nanoparticles increase nitric oxide (NO) secretion determined by NO production measurement.Conclusion:These results suggest that CuO NPs may exert antibacterial effects as well as cytotoxic effects on cancer cells by suppressing their growth, increasing the oxidative stress and inducing apoptosis.

scholarly journals Solanum Nigrum Leaf Extract Capped Copper Oxide Nanoparticles and its Tetrahedral L2Cu(ɳ2-BH4) Complex for Effective Degradation of Congo Red

2021 ◽  
Author(s):  
Kijay Bahadur Singh ◽  
Neelam Gautam ◽  
Deen Dayal Upadhyay ◽  
Gulam Abbas ◽  
Gajanan Pandey
Keyword(s):  
Copper Oxide ◽  
Surface Area ◽  
Congo Red ◽  
Leaf Extract ◽  
Copper Oxide Nanoparticles ◽  
Solanum Nigrum ◽  
Oxide Nanoparticles ◽  
Cuo Nps ◽  
Uv Visible ◽  
Positively Charged

Abstract In this work, we reported the green synthesis of Solanum nigrum extract capped copper oxide nanoparticles (SN@CuO NPs) at room temperature, avoiding harsh, toxic, and environment unfriendly chemicals. The synthesized SN@CuO NPs, were analyzed with the help of spectroscopic techniques. UV-visible spectroscopy confirmed the synthesis of SN@CuO NPs in reaction mixture while fourier transform infrared spectroscopy (FTIR) results revealed capping of phytochemicals of Solanum nigrum over the surface of CuO NPs. Morphology and elemental composition of formed SN@CuO NPs were explored with the help of FE-SEM, TEM, and EDS, respectively. Crystalline nature, surface charge and specific surface area was characterized using XRD pattern, DLS and BET analyses, respectivley. The data obtained from spectroscopic analyses specified the formation of mesoporous, positively charged and highly stabilized CuO nanoparticles due to adsorption of phytochemicals present in Solanum nigrum leaf extract on the CuO nanoparticle’s surface. SN@CuO NPs have shown promising catalytic activity towards reduction of highly carcinogenic dye Congo red making use of sodium borohydride. Negatively charged reactants like anionic Congo red molecules and BH4− ions eagerly adsorbed on positively charged, small sizes (5–6 nm), mesoporous SN@CuO NPs surface having wide surface area. It is proposed that BH4− ions interacted with SN@CuO NPs to form Cu tetrahydroborates dihydrogen bonded (DHB) tetrahedral L2Cu(ɳ2-BH4) complex, which is proved as an effective reducing agent. This complex acts as dihydrogen source for rapid reduction of azo bond. UV-visible, FTIR, 1H NMR, 13C NMR, and LC-MS studies of reaction mixture at different reaction stages have shown that the major degradation intermediates were benzidine and α-naphthol. The apparent rate constants for the products at intermediate and final degradation stages have been found to be 0.468 min− 1 and 0.0189 min− 1, respectively. A plausible degradation mechanism for Congo red reduction has also been proposed in this study.

scholarly journals Preparation of green synthesized copper oxide nanoparticles for efficient removal of lead from wastewaters

2021 ◽  
Author(s):  
Amir Zarrabi ◽  
Reza Ghasemi-Fasaei
Keyword(s):  
Copper Oxide ◽  
Green Synthesis ◽  
Leaf Extract ◽  
Metal Salt ◽  
Plant Cover ◽  
Equilibrium Concentration ◽  
Copper Oxide Nanoparticles ◽  
Polluted Water ◽  
Oxide Nanoparticles ◽  
Cuo Nps

Abstract Green synthesis is a clean and eco-friendly process in which metal nanoparticles can be produced via reaction between a metal salt solution and plant organ extract. In present study, three copper oxide nanoparticles were synthesized using green synthesis processes from the leaf extracts of selected plants as abundant plant cover in the study area including astragalus (Astragalus membranaceus), rosemary (Salvia rosmarinus) and mallow (Malva sylvestris). The effectiveness of three green synthesized nanoparticles in the adsorption of lead ions from a polluted water was studied under laboratory conditions. According to the results, the removal efficiencies of the copper oxide nanoparticles synthesized from astragalus (A-CuO-NPs), rosemary (R-CuO-NPs) and mallow leaf extract (M-CuO-NPs) especially at the highest initial concentration of Pb (1.5 mM) were 88.4 %, 84.9 % and 69.6 %, respectively. Most probably due the smooth morphology and more uniform configuration of the M-CuO-NPs, the changes between equilibrium adsorption (qe) and equilibrium concentration (Ce) were more regular than those of the A-CuO-NPs and R-CuO-NPs. Accordingly the best fitted data to Langmuir and Freundlich isotherms were observed in the adsorption of Pb onto the M-CuO-NPs. Despite the lowest removal efficiency of the M-CuO-NPs, with the equal volumes of each leaf extract and CuSO4.5H2O solution (20 mM), the most produced dry weight was observed for these nanoparticles (4.3 g per 100 mL of leaf extract). According to the results reported herein, the copper oxide nanoparticles synthesized from different plant covers are efficient adsorption agents for Pb from wastewaters.

Copper oxide nanoparticles: an antidermatophytic agent for Trichophyton spp.

2015 ◽  
Vol 4 (5) ◽  
Author(s):  
Rajesh Kumar ◽  
Shashi Kant Shukla ◽  
Anand Pandey ◽  
Sanjeev Kumar Srivastava ◽  
Anupam Dikshit
Keyword(s):  
Copper Oxide ◽  
Transition Metal Oxides ◽  
Pathogenic Bacteria ◽  
Copper Oxide Nanoparticles ◽  
X Ray Diffraction ◽  
Xrd Pattern ◽  
X Ray ◽  
Cuo Nps ◽  
Crystalline Nature ◽  
Prevalent Species

AbstractCopper oxide (CuO) is one of the most important transition metal oxides due to its unique properties. It is used in various technological applications such as high critical temperature, superconductors, gas sensors, in photoconductive applications and so on. Recently, it has been used as an antimicrobial agent against various pathogenic bacteria. In the present investigation, we studied the structural and antidermatophytic properties of CuO nanoparticles (NPs) synthesized by a precipitation technique. Copper sulfate was used as a precursor and sodium hydroxide as a reducing agent. Scanning electron microscopy (SEM) showed flower-shaped CuO NPs and X-ray diffraction (XRD) pattern showed the crystalline nature of CuO NPs. These NPs were evaluated against two prevalent species of dermatophytes, i.e.

scholarly journals Synthesis of Copper Oxide Nanoparticles Using Plant Leaf Extract of Catha edulis and Its Antibacterial Activity

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Worku Wubet Andualem ◽  
Fedlu Kedir Sabir ◽  
Endale Tsegaye Mohammed ◽  
Hadgu Hailekiros Belay ◽  
Bedasa Abdisa Gonfa
Keyword(s):  
Copper Oxide ◽  
Low Cost ◽  
Copper Nitrate ◽  
Solution Concentration ◽  
Antimicrobial Activities ◽  
Copper Oxide Nanoparticles ◽  
Green Technology ◽  
Catha Edulis ◽  
X Ray ◽  
Cuo Nps

Development of green technology is generating interest of researchers towards ecofriendly and low-cost methods for biosynthesis of nanoparticles (NPs). In this study, copper oxide (CuO) NPs were synthesized using a copper nitrate trihydrate precursor and Catha edulis leaves extract as a reducing and capping agent during the synthesis. The biosynthesized CuO NPs were characterized using an X-ray diffractometer (XRD), scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscope (TEM), Ultraviolet visible spectroscopy (UV-Vis), and Fourier transform infrared (FTIR) spectroscopy. XRD characterization confirmed that the biosynthesized CuO NPs possessed a good crystalline nature which perfectly matched the monoclinic structure of bulk CuO. Furthermore, the results obtained from SEM and TEM showed that the biosynthesized CuO NPs were spherical in shape. EDS characterization of the biosynthesized NPs also indicated that the reaction product was composed of highly pure CuO NPs. Moreover, the antimicrobial activities of different concentrations of CuO NPs synthesized using Catha edulis extract were also tested. Accordingly, the result showed that the highest zone of inhibitions measured were for CuO NPs synthesized using 1 : 2 ratios at 40 mg/ml solution concentration and observed to be 22 ± 0.01 mm, 24 ± 0.02 mm, 32 ± 0.02 mm, and 29 ± 0.03 mm for S. aureus, S. pyogenes, E. coli, and K. pneumonia, respectively.

scholarly journals Green synthesis of copper oxide nanoparticles using Juglans regia leaf extract and assessment of their physico-chemical and biological properties

2019 ◽  
Vol 8 (1) ◽  
pp. 557-567 ◽  
Author(s):  
Marjan Asemani ◽  
Navideh Anarjan
Keyword(s):  
Antioxidant Activity ◽  
Particle Size ◽  
Copper Oxide ◽  
Leaf Extract ◽  
Copper Oxide Nanoparticles ◽  
Copper Salt ◽  
Oxide Nanoparticles ◽  
Furnace Temperature ◽  
Cuo Nps ◽  
Synthesis Parameters

Abstract Copper oxide nanoparticles (CuO NPs) were green synthesized using walnut leaf extract. Effects of three synthesis parameters namely; amount copper salt (1-4 g), amount of walnut leaf extract (10-40 mL) and furnace temperature (300-500°C), on the particle size as manifested in broad absorption peak (λmax, nm), concentration (absorbance), antioxidant activity and antibacterial activity as minimum inhibitory concentration (MIC) of the fabricated CuO NPs were studied using response surface methodology, based on Box behnken experimental design. The spherical and crystalline monodispersed fabricated CuO NPs with mean particle size of 80 nm, were achieved using optimum synthesis parameters including 1 g copper salt, 14 mL walnut leaf extract and 490°C of furnace temperature. The fabricated CuO NPs at these conditions had maximum antioxidant activity of 83.64% and minimum MIC value of 1.78% w/v against E. coli, with λmax and absorbance values of 226 nm, 4.44% a.u., respectively.

Sign in / Sign up

Export Citation Format

Share Document