Basicity as a Thermodynamic Descriptor of Carbanions Reactivity with Carbon Dioxide: Application to the Carboxylation of α,β-Unsaturated Ketones

The utilization of carbon dioxide as a raw material represents nowadays an appealing strategy in the renewable energy, organic synthesis, and green chemistry fields. Besides reduction strategies, carbon dioxide can be exploited as a single-carbon-atom building block through its fixation into organic scaffolds with the formation of new C-C bonds (carboxylation processes). In this case, activation of the organic substrate is commonly required, upon formation of a carbanion C−, being sufficiently reactive toward the addition of CO2. However, the prediction of the reactivity of C− with CO2 is often problematic with the process being possibly associated with unfavorable thermodynamics. In this contribution, we present a thermodynamic analysis combined with density functional theory calculations on 50 organic molecules enabling the achievement of a linear correlation of the standard free energy (ΔG0) of the carboxylation reaction with the basicity of the carbanion C−, expressed as the pKa of the CH/C− couple. The analysis identifies a threshold pKa of ca 36 (in CH3CN) for the CH/C− couple, above which the ΔG0 of the carboxylation reaction is negative and indicative of a favorable process. We then apply the model to a real case involving electrochemical carboxylation of flavone and chalcone as model compounds of α,β-unsaturated ketones. Carboxylation occurs in the β-position from the doubly reduced dianion intermediates of flavone and chalcone (calculated ΔG0 of carboxylation in β = −12.8 and −20.0 Kcalmol-1 for flavone and chalcone, respectively, associated with pKa values for the conjugate acids of 50.6 and 51.8, respectively). Conversely, the one-electron reduced radical anions are not reactive toward carboxylation (ΔG0 > +20 Kcalmol-1 for both substrates, in either α or β position, consistent with pKa of the conjugate acids < 18.5). For all the possible intermediates, the plot of calculated ΔG0 of carboxylation vs. pKa is consistent with the linear correlation model developed. The application of the ΔG0 vs. pKa correlation is finally discussed for alternative reaction mechanisms and for carboxylation of other C=C and C=O double bonds. These results offer a new mechanistic tool for the interpretation of the reactivity of CO2 with organic intermediates.

Use of Ionic Liquid Pretreated and Fermented Sugarcane Bagasse as an Adsorbent for Congo Red Removal

A large amount of industrial wastewater containing pollutants including toxic dyes needs to be processed prior to its discharge into the environment. Biological materials such as sugarcane bagasse (SB) have been reported for their role as adsorbents to remove the dyes from water. In this study, the residue SB after fermentation was utilized for the dye removal. A combined pretreatment of NaOH and methyltrioctylammonium chloride was given to SB for lignin removal, and the pretreated SB was utilized for cellulase production from Bacillus aestuarii UE25. The strain produced 118 IU mL−1 of endoglucanse and 70 IU mL−1 of β-glucosidase. Scanning electron microscopy and FTIR spectra showed lignin and cellulose removal in fermented SB. This residue was utilized for the adsorption of an azo dye, congo red (CR). The thermodynamic, isotherm and kinetics studies for the adsorption of CR revealed distinct adsorption features of SB. Untreated SB followed Langmuir isotherm, whereas pretreated SB and fermented SB obeyed the Freundlich isotherm model. The pseudo-second-order model fitted well for the studied adsorbents. The results of thermodynamic studies revealed spontaneous adsorption with negative standard free energy values. Untreated SB showed a 90.36% removal tendency at 303.15 K temperature, whereas the adsorbents comprised of pretreated and fermented SB removed about 98.35% and 97.70%, respectively. The study provided a strategy to utilize SB for cellulase production and its use as an adsorbent for toxic dyes removal.

Sustainable Oil Adsorption from Produced Water using Cane Papyrus as Natural Biosorbent

High quantities of wastewater produced from producing natural gas and oil from the aquifer, which called produced water. The produced water was comprised of dissolved solids, suspended solids, emulsified oil, and organic and inorganic compounds. That should be treated it's before disposal because it causes harm to the environment. This study takes the produced water from the southern Iraqi oilfield drilling company to adsorption by the Cane papyrus as natural and low-cost adsorbent. The analysis completed by using Fourier transforms infrared spectroscopy, EDX spectra and Scanning Electron Microscopic (SEM) for Cane papyrus. Investigating the effect of many parameters such as adsorbent dosage, temperature, solution pH, mixer speed and contact time. The Langmuir, Freundlich, Temkin and Harkins-Henderson isotherm models were tested, the results were 0.998,0.966, 0.931 and 0.966 respectively. The Langmuir model was more suitable described the adsorption process than the other models. The kinetics results were, 0.984 for Pseudo-first-order, 0.938 for Pseudo-second order is, 0.979 for Intra particle diffusion study and 0.912 for the Elovich model, the Pseudo-first-order kinetic equation best described the kinetics of the reaction. The thermodynamics study effect temperature changes on the thermodynamic parameters such as standard free energy change (∆G°), standard enthalpy change (∆H°) and standard entropy change (∆S°). The experimental data obtained demonstrated that Cane papyrus is a suitable adsorbent for removing oil from produced water.

Preparation of Metal Nitride Particles Using Arc Discharge in Liquid Nitrogen

A simple process to synthesize metal nitride particles was proposed using submerged arc discharge plasma in liquid nitrogen. Gibbs standard free energy was considered for the selection of the nitride-forming materials. In this study, titanium (Ti) and aluminum (Al) electrodes were used as raw materials for nitride particle preparation. Liquid nitrogen acted as a dielectric medium as well as a nitridation source in this process. A copper electrode was also used as a non-reactive material for comparison with the reactive Ti and Al electrodes. As the operating conditions of the experiments, the arc discharge current was varied from 5 A (low-power mode) to 30 A (high-power mode). The formation of titanium nitride (TiN) and aluminum nitride (AlN) was confirmed in the particles prepared in all experimental conditions by X-ray powder diffraction (XRD). The observation using a field emission scanning electron microscope (FE-SEM) and a field emission transmission electron microscope (FE-TEM) indicated that the synthesized TiN particles showed a cubic morphology, whereas AlN particles containing unreacted Al showed a spherical morphology. The experiments using different metal electrode configurations showed that the anode generated most of the particles in this process. Based on the obtained results, a particle formation mechanism was proposed.

Adsorption Properties of Hydrocarbon and Fluorocarbon Surfactants Ternary Mixture at the Water-Air Interface

Measurements were made of the surface tension of the aqueous solutions of p-(1,1,3,3-tetramethylbutyl) phenoxypoly(ethylene glycols) having 10 oxyethylene groups in the molecule (Triton X-100, TX100) and cetyltrimethylammonium bromide (CTAB) with Zonyl FSN-100 (FC6EO14, FC1) as well as with Zonyl FSO-100 (FC5EO10, FC2) ternary mixtures. The obtained results were compared to those provided by the Fainerman and Miller equation and to the values of the solution surface tension calculated, based on the contribution of a particular surfactant in the mixture to the reduction of water surface tension. The changes of the aqueous solution ternary surfactants mixture surface tension at the constant concentration of TX100 and CTAB mixture at which the water surface tension was reduced to 60 and 50 mN/m as a function of fluorocarbon surfactant concentration, were considered with regard to the composition of the mixed monolayer at the water-air interface. Next, this composition was applied for the calculation of the concentration of the particular surfactants in the monolayer using the Frumkin equation. On the other hand, the Gibbs surface excess concentration was determined only for the fluorocarbon surfactants. The tendency of the particular surfactants to adsorb at the water-air interface was discussed, based on the Gibbs standard free energy of adsorption which was determined using different methods. This energy was also deduced, based on the surfactant tail surface tension and tail-water interface tension.

A novel sensitive colorimetric determination of catecholamine drug in dosage form via oxidative coupling reaction with MBTH and potassium ferricyanide

A new and direct colorimetric method has been established for the determination of catecholamine (methyldopa, MD) in both pure form and in pharmaceutical formulations. The method is based on the oxidative coupling reaction of MD with 3-methyl-2-benzothiazolinone hydrazone hydrochloride monohydrate (MBTH) and potassium ferricyanide at pH 10.4 in aqueous medium to form an orange product that has a maximum absorption at 460 nm. Beer's law plot showed good correlation in the concentration range of 1.0−56.0 µg mL-1, with detection limit of 0.31 µg mL-1. Molar absorptivity for the above method was found to be 6.56×103 L mol-1 cm-1. All the measurements were carried out at 25 ± 1.0 °C, the formation constant (logKf) value of colored species is 9.48 and the standard free energy (DG‡) is − 54.09 KJ mol-1. This method was applied successfully to determination of MD in tablets and the results were compared with the USP method. Common excipients used as additives in tablets do not interfere in the proposed method. The method is accurate, precise and highly reproducible, while being simple, cheap and less time consuming and hence can be suitably applied for routine analysis of MD in bulk and dosage forms.

Systematic Studies of Sodium γ-Octyl Aspartate to evaluate its Biodegradation, Surface Parameters, Micellization Aspects and Thermodynamic Properties of its Binary Mixture using Electrolytes

γ-octyl aspartate has been synthesized with 46.2% yield. The optimized conditions for esterification of aspartic acid and n-octanol are 24 hours duration and 1:1 molar ratio of reactants (aspartic acid: n-octanol). FT-IR, 1H NMR and CHNS element analysis techniques are used for structure elucidation of γ -octyl aspartate. Surface/ interfacial studies, micellization aspects, thermodynamic parameters, biodegradability and binary salt behaviour of sodium γ-octyl aspartate have been studied. The CMC of synthesized surfactants was 0.0078 mol/L, whereas minimum surface area per surfactant molecule was calculated as 29.49 Å2m2; calculated aggregation number was 34 and micelle radius (r) found to be 1.40 nm. The degree of counter-ion dissociation (α) was determined to be 0.86. Thermodynamic parameter - standard free energy of adsorption (ΔG0ads) was calculated as -18.70 kJ/mol. The shape of micelle of synthesized surfactant was noticed to be spherical but during binary studies in some cases, it was found to be cylindrical. OECD and Winkler’s method were used to determine biodegradation of sodium γ-octyl aspartate found to be 95.1 %.

Biophysical and structural studies reveal marginal stability of a crucial hydrocarbon biosynthetic enzyme acyl ACP reductase

Acyl-ACP reductase (AAR) is one of the two key cyanobacterial enzymes along with aldehyde deformylating oxygenase (ADO) involved in the synthesis of long-chain alkanes, a drop-in biofuel. The enzyme is prone to aggregation when expressed in Escherichia coli, leading to varying alkane levels. The present work attempts to investigate the crucial structural aspects of AAR protein associated with its stability and folding. Characterization by dynamic light scattering experiment and intact mass spectrometry revealed that recombinantly expressed AAR in E. coli existed in multiple-sized protein particles due to diverse lipidation. Interestingly, while thermal- and urea-based denaturation of AAR showed 2-state unfolding transition in circular dichroism and intrinsic fluorescent spectroscopy, the unfolding process of AAR was a 3-state pathway in GdnHCl solution suggesting that the protein milieu plays a significant role in dictating its folding. Apparent standard free energy $$\left( {\Delta {\text{G}}_{{{\text{NU}}}}^{{{\text{H}}_{2} {\text{O}}}} } \right)$$ Δ G NU H 2 O of ~ 4.5 kcal/mol for the steady-state unfolding of AAR indicated borderline stability of the protein. Based on these evidences, we propose that the marginal stability of AAR are plausible contributing reasons for aggregation propensity and hence the low catalytic activity of the enzyme when expressed in E. coli for biofuel production. Our results show a path for building superior biocatalyst for higher biofuel production.

Physics and Chemistry of Solid State Direct Reduction of Iron Ore by Hydrogen Plasma

Presently, Iron is produced from iron ores by using carbon from coal. The production process is consisting of many stages. The involvement of multi-stages needs high capital investments, large-scale equipments, and produces large amounts of carbon dioxide (CO2) responsible for environmental pollution. There have been significant efforts to replace carbon with hydrogen (H2). Although H2 is the strongest reductant, it still also has thermodynamic and kinetic limitations. However, these thermodynamic and kinetic limitations could be removed by hydrogen plasma (HP). HP comprises rovibrationally excited molecular, atomic, and ionic states of hydrogen. All of them contribute to thermodynamic advantage by making the Gibbs standard free energy more negative, which makes the reduction of iron oxides feasible at low temperatures. Apart from the thermodynamic advantage, these excited species increase the internal energy of HP, which reduces the activation energy, thereby making the reduction easier and faster. Apart from the thermodynamic and kinetic advantage of HP, the byproduct of the reaction is environmentally benign water. This review discusses the physics and chemistry of iron ore reduction using HP, emphasizing the solid-state reduction of iron ore. HP reduction of iron ore is a high potential and attractive reduction process.

Distinct Binding Mechanisms for Allosteric Sodium Ion In Cannabinoid Receptors

The therapeutical potential of Cannabinoid receptors is not fully explored due to psychoactive side-effects and lack of selectivity associated with the orthosteric ligands. Allosteric modulators have the potential to become selective therapeutics for cannabi- noid receptors. Biochemical experiments have shown the effects of the allosteric Na+ binding on cannabinoid receptor activity. However, the Na+ coordination site, and binding pathway are still unknown. Here, we perform molecular dynamic simulations to explore Na+ binding in the cannabinoid receptors, CB1 and CB2. Simulations reveal that Na+ binds to the primary binding site from different extracellular sites for CB1 and CB2. A distinct secondary Na+ coordinate site is identified that is not present in CB2. Furthermore, simulations also show that intracellular Na+ could bind to the Na+ binding site in CB1. Constructed Markov state models show that the standard free energy of Na+ binding is similar to the previously calculated free energy for other class A GPCRs.