scholarly journals Сравнительная оценка засухоустойчивости местных сортов кукурузы

2021 ◽  
Author(s):  
Елена Былич ◽  
Keyword(s):  
Comparative Analysis ◽  
Drought Tolerance ◽  
Plant Height ◽  
Resistance Genes ◽  
Climatic Conditions ◽  
Limiting Factor ◽  
Genotypic Differences ◽  
Local Varieties ◽  
Biometric Parameters ◽  
Yield Parameters

The paper presents the results of assessing local varieties of corn for drought tolerance. Samples of the collection were tested in the field in the agro-climatic conditions of 2020. The criterion of re-sistance was the genotypic differences of the samples of such biometric parameters as: plant height; the number of productive ears; ear weight; weight of 1000 grains. The influence of the limiting factor reduced the number of productive ears (on average for varieties to 0,48). A positive correlation of this indicator with the weight of the ear (r = 0,77) and the weight of 1000 grains (r = 0,43) was determined. Four varie-ties were identified that exceeded the standard in terms of the weight of the ear and four in terms of the weight of 1000 grains. As a result of a comparative analysis of yield parameters after exposure to drought, four local varieties were identified that can serve as donors of resistance genes.

scholarly journals Comparison of Different Multivariate Statistical Methods for Screening the Drought Tolerant Genotypes of Pearl Millet (Pennisetum americanum L.) and Sorghum (Sorghum bicolor L.)

Agronomy ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 645
Author(s):  
Mohammadreza Negarestani ◽  
Enayatollah Tohidi-Nejad ◽  
Gholamreze Khajoei-Nejad ◽  
Babak Nakhoda ◽  
Ghasem Mohammadi-Nejad
Keyword(s):  
Drought Tolerance ◽  
Pearl Millet ◽  
Climatic Conditions ◽  
Water Requirement ◽  
Limiting Factor ◽  
Block Designs ◽  
Plant Water ◽  
Multivariate Statistical ◽  
Drought Tolerant ◽  
Drought Tolerance Indices

Drought is the main limiting factor of crops production in major regions of the world. Forage plants such as pearl millet and sorghum are drought tolerant and suitable for arid regions to grow. In this study, for selecting and introducing the best drought tolerant genotypes, seven pearl millet and five sorghum genotypes in three locations (Kerman, Jiroft, and Bardsir in Kerman Province) were studied with different climatic conditions. The experiments were conducted for three consecutive years of cultivation (2016, 2017, and 2018) under regularly irrigated conditions and the 100% (I100, full irrigation) plant water requirement and under water deficiency, (50%) plant water requirement (I50) in two randomized complete block designs in triplicate separately at each location. Eight drought tolerance/susceptibility indices were used. Multivariate factor analysis (FA) and stress tolerance score (STS) methods were employed to compare the most drought tolerant genotypes in each region. The STS method was more efficient and effective than the FA method for detecting the most drought tolerant genotype with any number of used genotypes. Based on the results of drought tolerance indices and STS, the IP13150 and IP13151 genotypes of pearl millet and speed feed genotype of sorghum in Kerman, Jiroft, and Bardsir respectively, were introduced as the most drought tolerant genotypes for three consecutive years of cultivation.

scholarly journals Analiza diferitor hibrizi de perspectivă în sectoarele comparative

2021 ◽  
Author(s):  
Rodica Martea ◽  
◽  
Ion Gisca ◽  
Aliona Cucereavii ◽  
◽  
...  
Keyword(s):  
Helianthus Annuus ◽  
Plant Height ◽  
Seed Weight ◽  
International Markets ◽  
Climatic Conditions ◽  
Seed Number ◽  
Breeding Programs ◽  
Biometric Parameters ◽  
Global Agriculture ◽  
Productivity Indices

Sunflower (Helianthus annuus L.) holds a prominent place in global agriculture as one of the most important crops from economical and alimentary aspect and is highly demanded both on domestic and international markets. Current study focuses on the analysis of morphological and productivity characteristics for a number of sunflower hybrids obtained in AMG-Agroselect Comerts SRL breeding programs. The values for the main biometric parameters were analyzed. Evaluation of the productivity indices demonstrates lower values in 2020 for most parameters of produc-tivity compared to 2019, specific climatic conditions of the mentioned year explain this fact. ‘Nistru’ hybrid in 2019 showed the best performance in four cases (leaf number, capitulum diameter, seed weight per capitulum and TKW). ‘Zimbru’ hybrid showed minimal values in five cases (plant height, ca-pitulum diameter, seed weight per capitulum, seed number per capitulum and TKW).

scholarly journals Significance of varieties in technology of growing parsley

2021 ◽  
Vol 1 (99) ◽  
pp. 47-58
Author(s):  
V. V. Ketskalo ◽  
◽  
A. G. Ternavskyi ◽  
Т. V. Polischuk
Keyword(s):  
Plant Height ◽  
Plant Development ◽  
Total Yield ◽  
Growing Season ◽  
Climatic Conditions ◽  
Forest Steppe ◽  
Biometric Parameters ◽  
Leaf Mass ◽  
Genetic Features ◽  
The Right

In order to obtain a significant level of parsley yield in the Right-Bank Forest-Steppe of Ukraine, it is necessary to select varieties in accordance with soil and climatic conditions of cultivation. The comparative estimation of productivity of grades of parsley of sheet foreign selection in the specified conditions is carried out. The results of phenological observations of plant development, their biometric parameters depending on the genetic features are presented. The possibility of growing the studied varieties of leaf parsley of foreign selection in the conditions of the Right-Bank Forest-Steppe of Ukraine has been established. From the presence of mass shoots to the last harvest, the studied varieties had a growing season of 128–155 days. The first harvest was carried out 61–74 days after the mass germination. Aromatic and Vega varieties proved to be faster growing. The leaf mass of Orpheus and Fest was slightly slower. Vega and Orpheus plants had the lowest height – 23.6 cm and 25.4 cm, respectively. The next to increase the height of the leaf rosette was the Fest variety, whose plants reached 33.9 cm. The plants of the Pione variety were 35.1 cm high. The highest plant height in the experiment was Argon and Aromatnaya – 36.2 cm and 36.4 cm, respectively. Vega and Orpheus plants had the lowest productivity – 114 g and 160 g, respectively. The next variety as the productivity of the plant increased was the variety Argon with an index of 195 g. The plants of the control variety Aromatnaya had a productivity of 227 g. The plants of the varieties Fest and Pione had the highest productivity – 253 g and 255 g, respectively. The total yield of parsley leaf mass in the experiment averaged 5.01–10.20 kg/m2. Vega was the lowest and Fest and Pione the lowest.

scholarly journals Improvement of Upland Rice Variety by Pyramiding Drought Tolerance QTL with Two Major Blast Resistance Genes for Sustainable Rice Production

Rice Science ◽  
2021 ◽  
Vol 28 (5) ◽  
pp. 493-500
Author(s):  
Vishalakshi Balija ◽  
Umakanth Bangale ◽  
Senguttuvel Ponnuvel ◽  
Kalyani Makarand Barbadikar ◽  
Srinivas Prasad Madamshetty ◽  
...  
Keyword(s):  
Drought Tolerance ◽  
Resistance Genes ◽  
Upland Rice ◽  
Blast Resistance ◽  
Rice Variety ◽  
Rice Production ◽  
Blast Resistance Genes

scholarly journals THE ESTIMATION OF PEAS COLLECTION IN THE ALTAI

2019 ◽  
pp. 48-52
Author(s):  
S. K. Shchukis ◽  
E. R. Shchukis
Keyword(s):  
Plant Height ◽  
Rapid Development ◽  
Climatic Conditions ◽  
Source Material ◽  
Pea Aphid ◽  
Diverse Source ◽  
Selection Of ◽  
Vast Territory

The article emphasizes the importance of peas as a source of vegetative protein, and indicates on insufficient areas under peas both in Russia and in the Altai. One of the reasons of reducing its acreage is the high costs on peas planting and protecting from pests, diseases and weeds. Climate changing contributes to rapid development of such harmful diseases as ascohitoz, bacteriosis, fusarium, rust, significant number of weevil, pea aphid and moth mullet. Considering the main directions in pea breeding, it should be emphasized that the Altai Area, with its vast territory and diverse natural and climatic conditions, requires highly productive, well-adapted varieties of different use which are capable to effectively use agro-climatic resources of different zones. All this requires the active study of the source material, the selection of new, economically valuable forms and their introduction into the breeding process. It has been noted that the production requires more advanced varieties, the development of which is impossible without the presence of diverse source material. The purpose of the study was to identify the best productive plants in the pea collection of 2012-2017. The material has been represented by 113 variety samples of domestic and foreign selection. The varieties with best productivity were ‘Mnogoplodny 163’, ‘Rheinperle’, ‘Flagman 12’, ‘806’9, ‘Varyag’, ‘Altaisky Usaty’, ‘Pioner’, ‘LittleMarwel’, ‘Mnogoplodny 27’, ‘Zeleny Tsukat’, ‘Ryadovoy’, ‘576/80’. The best forage productivity was produced by ‘Novosibirets’, ‘Varyag’, ‘Pino’, ‘Zeleny Tsukat’, ‘Mnogoplodny 105’. The most fast-ripening varieties were ‘Rheinperle’ and ‘Pyrama’. The samples ‘Novosibirets’, ‘Varyag’, ‘Pino’ and ‘8067’ were characterized with high plant height. The samples ‘Pyrama’, ‘Flagman 12’, ‘Novosibirets’, ‘Sihirobana-Kinusaja’, the line ‘312’ produced large-sized kernels. The great lodge resistance has been shown by ‘Altaisky Usaty’, ‘Svetozar’, ‘Kamerton’, ‘Flagman 12’.

scholarly journals Sorghum in dryland: morphological, physiological, and molecular responses of sorghum under drought stress

Planta ◽  
2021 ◽  
Vol 255 (1) ◽  
Author(s):  
Kibrom B. Abreha ◽  
Muluken Enyew ◽  
Anders S. Carlsson ◽  
Ramesh R. Vetukuri ◽  
Tileye Feyissa ◽  
...  
Keyword(s):  
Drought Stress ◽  
Drought Tolerance ◽  
Nutritional Quality ◽  
Substantial Reduction ◽  
Limiting Factor ◽  
Molecular Alterations ◽  
Germination Process ◽  
Effects Of Drought ◽  
Grain Yield And Quality ◽  
Source Sink

Abstract Main conclusion Droughts negatively affect sorghum’s productivity and nutritional quality. Across its diversity centers, however, there exist resilient genotypes that function differently under drought stress at various levels, including molecular and physiological. Abstract Sorghum is an economically important and a staple food crop for over half a billion people in developing countries, mostly in arid and semi-arid regions where drought stress is a major limiting factor. Although sorghum is generally considered tolerant, drought stress still significantly hampers its productivity and nutritional quality across its major cultivation areas. Hence, understanding both the effects of the stress and plant response is indispensable for improving drought tolerance of the crop. This review aimed at enhancing our understanding and provide more insights on drought tolerance in sorghum as a contribution to the development of climate resilient sorghum cultivars. We summarized findings on the effects of drought on the growth and development of sorghum including osmotic potential that impedes germination process and embryonic structures, photosynthetic rates, and imbalance in source-sink relations that in turn affect seed filling often manifested in the form of substantial reduction in grain yield and quality. Mechanisms of sorghum response to drought-stress involving morphological, physiological, and molecular alterations are presented. We highlighted the current understanding about the genetic basis of drought tolerance in sorghum, which is important for maximizing utilization of its germplasm for development of improved cultivars. Furthermore, we discussed interactions of drought with other abiotic stresses and biotic factors, which may increase the vulnerability of the crop or enhance its tolerance to drought stress. Based on the research reviewed in this article, it appears possible to develop locally adapted cultivars of sorghum that are drought tolerant and nutrient rich using modern plant breeding techniques.

scholarly journals Comparative Analysis of Rice Performance and Profitability with the System of Rice Intensification (SRI) and Traditional Practices (TP) in Ziguinchor District, Senegal

2021 ◽  
Vol 2 (1) ◽  
pp. 22-36
Author(s):  
Pierre C. C. DIEDHIOU ◽  
Antoine SAMBOU ◽  
Ousmane NDIAYE, NGor NDOUR ◽  
Seydou K. DIEDHIOU
Keyword(s):  
Comparative Analysis ◽  
Rice Production ◽  
System Of Rice Intensification ◽  
Cost Ratio ◽  
Traditional Practices ◽  
Traditional System ◽  
Benefit Cost Ratio ◽  
Yield Parameters ◽  
Rice Intensification ◽  
Benefit Cost

The "System of Rice Intensification"(SRI) represents a sustainable alternative to improve household yields and incomes. This study aimed to evaluate the yields and the profitability of the SRI and the Traditional Practices (TP) in Ziguinchor district, Senegal. A directed sampling based on criteria for selecting the system used and the cultivated varieties common to both systems was applied to collect the yield parameters and yields of paddy rice. Thus, 18 producers in the Badiate, Essyl, and Fanda sites were selected, nine per system and four 1 m2 yield squares were installed in each selected producer plot. A total of 72 yield squares, 36 per system, were installed, and an individual questionnaire was randomly administered to 55 producers using at least one of the systems to collect data on rice production and costs. The yield parameters including the number of fertile tillers per m2, the number of spikes, the weight of the 1000 grains are significantly higher (p<0.05) in the SRI including yield compared to the traditional system. Transplanting density and plant duration are higher in TP (26±5.6 plants/m2 and 26 days) than in SRI (16±0.4 plants/m2 and 16 days). The lower the transplanting density, the higher the yield parameters and the yield. The economic profitability, determined based on the benefit/cost ratio, is higher in SRI (1.5) than in TP (1.2). The SRI required a lot of technicality in its implementation and generated more cost of production. However, SRI was more productive and economically more profitable than the traditional system.

scholarly journals Initial growth of coffee (Coffea arabica L. var) castillo in the coffee zone of Nariño

2019 ◽  
Vol 36 (E) ◽  
pp. 124-137
Author(s):  
Hernando Criollo E. ◽  
Johanna Muñoz B. ◽  
Jorge Checa B. ◽  
Wilmer Noguera R.
Keyword(s):  
Plant Height ◽  
Statistical Design ◽  
Climatic Conditions ◽  
Initial Growth ◽  
Area Index ◽  
Physiological Variables ◽  
Physiological Processes ◽  
Number Of Leaves ◽  
La Florida ◽  
Coffee Cultivation

The importance of coffee cultivation in Nariño is reflected in the fact that 64% of its municipalities grow coffee. The ruggedness of its Andean topography provides great diversity in terms of climatic conditions, which, in one way or another, affect the behavior of coffee in all its physiological processes. Therefore, this study sought to identify the variation in the growth processes and production processes in the different coffee areas of this department, including the coffee-growing municipalities Sandoná, Consacá, La Florida and La Unión in the Department of Nariño, using experimental lots located at different altitude ranges (B <1600msnm; M between 1600 and 1800msnm and A >1800msnm). The statistical design used for each municipality was Random Complete Blocks with three treatments and sixteen repetitions. The recorded climatic variables included photosynthetically active radiation, ambient temperature, precipitation and relative humidity, and the evaluated physiological variables were plant height, number of leaves, basal stem diameter, number of primary branches, number of secondary branches, length of primary branches, number of knots per branch and leaf area index. The variable plant height was statistically higher in the upper zone (A) in the municipalities La Florida (79.95 cm) and Consacá (64.31cm); in La Florida, the number of branches and the LAI were higher in the upper zone plants, while the diameter of the stems was higher in the middle zone. In the other municipalities, these variables were not affected by the altitude.

scholarly journals Aplikasi Pestisida Nabati Maja - Gadung dan Metabolit Sekunder Beauveria Bassiana Bals. Untuk Mengendalikan Hama Thrips Sp. Pada Tanaman Cabai Rawit

2021 ◽  
Vol 2 ◽  
pp. 187-193
Author(s):  
Tarjoko Tarjoko ◽  
Mujiono Mujiono
Keyword(s):  
Plant Height ◽  
Beauveria Bassiana ◽  
Block Design ◽  
Fruit Weight ◽  
Limiting Factor ◽  
Predator Population ◽  
Single Application ◽  
Combined Application ◽  
Botanical Pesticide ◽  
Number Of Leaves

Pest attacks on chili plants are the main limiting factor in cultivation activities. The research  aims to determine the effect of single application of botanical pesticide maja-gadung (PMG), single application of secondary metabolite Beauveria bassiana BIO (BIO B10), combined application of PMG and BIO B10  on pest populations, predator populations and plant growth and production of  chili. The  reesearh used a factorial Completely Randomized Block Design (RAKL) with 3 replications, so there were 9 treatment combinations (0 ml/l PMG, 4 ml/l PMG, 8 ml/l BIO B10, 0 ml/l PMG, 2  ml/l BIO B10,  4 ml/l BIO B10, 4 ml PMG+2 ml/l BIO B10,  4 ml/ml PMG+4 ml BIO B10, 8 ml/l  PMG+2ml/l BIO B10, 8 ml/l PMG+4 ml/l BIO B10). The variables observed were Thrips sp population, predator population, plant height, number of leaves, and fruit weight per plant. The results showed that the single application treatment of PMG  with a concentration of 4 ml/l and 8 ml/l was able to suppress the population of Thrips sp. by 21.6% and 41.4% compared to the control. The single application treatment of BIO B10  with concentrations of 2 ml/l and 4 ml/l was able to suppress the population of Thrips sp. by 66.5% and 65.5% compared to the control. The best combination application is PMG  and BIO B10with a concentration of 8 ml/l + 4 ml/l which is able to suppress the population of Thrips sp. by 76.9% compared to the control. The application treatment of PMG andBIO B10 did not affect plant height, number of leaves, and fruit weight per plant.

Sign in / Sign up

Export Citation Format

Share Document