Inter-eye Differences in Ocular Biometric Parameters of Concomitant Exotropia

Purpose: To evaluate the ocular biometric parameters in patients with constant and intermittent exotropia by the measurement of swept-source optical coherence tomography (SS-OCT) optical biometer OA-2000 and comparing it with the normal control subjects.Design: Cross-sectional case-control study.Participants: Fifty-five constant and 24 intermittent patients with exotropia with central fixation and 77 orthotropic normal control participants aged 4–18 years old.Methods: Non-contact and high-resolution optical biometric OA-2000 measurements were conducted under uniform ambient light conditions. The statistical analysis included intraclass correlation coefficient (ICC), Bland-Altman plot, and independent t-tests.Main Outcome Measures: Spherical equivalent (SE), ocular biological parameters such as pupil diameter (PD), anterior chamber depth (ACD), lens thickness (LT), and axial lengths (AL). The absolute values of inter-eye differences for SE, PD, ACD, LT, and AL were recorded as AnisoSE, AnisoPD, AnisoACD, AnisoLT, and AnisoAL, respectively.Results: AnisoSE (0.878 vs. 0.577, P = 0.019), AnisoAL (0.395 vs. 0.208, P = 0.001), AnisoACD (0.060 vs. 0.032, P < 0.001), AnisoLT (0.060 vs. 0.031, P = 0.002), and AnisoPD (0.557 vs. 0.340, P = 0.002) were significantly larger in concomitant patients with exotropia. The SE, AL, ACD, LT, and PD showed excellent binocular correlation with ICC values that ranged from 0.943 to 0.987 in control participants and from 0.767 to 0.955 in concomitant exotropia patients. Bland-Altman plots showed the wider range of agreement in patients with concomitant exotropia than the control participants (SE: 5.0288 vs. 3.3258; AL: 2.2146 vs. 1.3172; ACD:0.3243 vs. 0.1682; PD: 2.4691 vs. 1.9241; and LT:0.3723 vs 0.1858).Conclusion: Patients with concomitant exotropia showed larger inter-eye differences in SE, ACD, LT, PD, and AL. Advice should be given to suspicious children to avoid or delay the development of concomitant exotropia.

Development of a New Shoe Fitting for Obese Adults

Background: Standard fit as well as wide-fit footwear not currently being pertinent and comfortable for the obese adults. The biometric measurements of obese foot (such as foot length, foot width, heel girth, instep girth, waist girth, and ball girth,) significantly differ from healthy adults. Aim: This study aims to develop a new shoe fitting for obese adults based on significant relationships among the relevant biometric parameters of the foot. Method: These measurements of obese foot were determined using a Brannock device and measuring tape. All kinds of foot girth measurements were analyzed against scaling based on foot width or current fitting, BMI, foot length, heel girth, instep girth, waist girth and ball girth and compared these data with ANOVA. Result: Results showed that responses of all kinds of girths against waist girth scaling provide best fitting prospects of obese adults than current standard fit as well as other parameters. Conclusion: From the study and results, it can be concluded that shoe fitting based on waist girth can give more precise comfort and improve the ergonomic fitness of the product for obese users. Bangladesh Journal of Medical Science Vol. 21(1) 2022 Page : 45-53

A Comprehensive Method for the Evaluation of Hermetia illucens Egg Quality Parameters: Implications and Influence Factors

The significant momentum received by Hermetia illucens as a worldwide species is due to its biological traits and large applicability in scientific research, environmental entomoremediation, insect meal production, and for biodiesel yield. The aim of this research is to develop a method for the preparation and precise egg counting of the H. illucens egg clutch, as well as an accurate technique for evaluating egg biometric parameters. The precise proposed method for egg preparation and counting consists in dispersing the eggs clutch under a stereo microscope and counting the eggs on a photographic capture using the Clickmaster software. Five solution types were used to disperse the egg clutches: glycerin 50%, ethanol 70%, ethanol 80%, physiological serum 0.9% and purified water. The efficiency of the estimation method for eggs number evaluation was also tested by using the estimated egg weight as a conversion factor. The biometric parameters of single eggs (length and width) were determined using the free Toupview software. The precise method of egg preparation and counting allows for the registration of the eggs number manually identified by the operator. The appropriate dispersion solutions were glycerin 50% and ethanol 70%. The method has an error of 1.4 eggs for each 500 counted eggs, thus an accuracy of over 99.4%. The eggs number estimation method is not applicable without significant errors, the accuracy being less than 32%, due to egg heterogeneity in the clutch. Biometric parameters (length and width) are positively correlated with egg weight (r = 0.759) and with the number of eggs in the clutch (r = 0.645). In conclusion, the results clearly suggest the method of egg preparation and precise counting for an accurate evaluation of quality parameters of the H. illucens clutches, as well as the technique for evaluating egg biometric parameters.

Biomorphological features of floribunda roses leaves and their importance for ornamental gardening

The results of morphometric analysis of the leaves in floribunda roses varieties, such as Pomponella, Lovely Green, Carmagnola, Arthur Bell, Lilli Marleen, Westpoint, Minerva, Novalis, Goldelse, Rotkappchen, Friesia, Lavaglut, Iceberg, Santa Monika, Mathias, Bella Rosa, Cream Abundance, Hans Gonewein, Let's Celebrate and Gebruder Grimm, which have different origins and differ significantly in morphological and decorative characteristics are presented. The studies were conducted during 2018–2021 on the experimental plots of the Department of Landscape Gardening of Uman National University of Horticulture according to the generally accepted method. The description of the morphological traits of the varieties was carried out by the method of visual assessment using measurements and calculations. As a result of the research, it was found that the studied genotypes significantly differ in the biometric parameters of the compound leaf, features of the surface of leaf blades, their shape and size. The highest leaf blades areas were noted in the varieties Novalis 15.1 сm2, Rotkappchen 12.0 cm2 and Pomponella 11.8 cm2. The lowest biometric traits of the leaf were recorded in the varieties Santa Monika, whose compound leaf length is 9.2 cm, Mathias 9.1 cm, Bella Rosa 10.8 cm and Cream Abundance 9.8 cm. The size of the leaf, its shape, color and gloss, are important for the overall impression of the planting object and determine the decorative value of the respective variety. Of all the varieties, Westpoint, Rotkappchen, Hans Gonewein, and Gebruder Grimm have the glossiest leaves. The bright shine together with dark green color of the leaves of these varieties make their bushes more expressive and bright and, therefore, more attractive for use in ornamental gardening. The results of the study are of practical importance, since they make it possible to select varieties that are valuable for ornamental gardening, not only in decorativeness of the flower, but also in the characteristics of their leaf appearance.

Significance of varieties in technology of growing parsley

In order to obtain a significant level of parsley yield in the Right-Bank Forest-Steppe of Ukraine, it is necessary to select varieties in accordance with soil and climatic conditions of cultivation. The comparative estimation of productivity of grades of parsley of sheet foreign selection in the specified conditions is carried out. The results of phenological observations of plant development, their biometric parameters depending on the genetic features are presented. The possibility of growing the studied varieties of leaf parsley of foreign selection in the conditions of the Right-Bank Forest-Steppe of Ukraine has been established. From the presence of mass shoots to the last harvest, the studied varieties had a growing season of 128–155 days. The first harvest was carried out 61–74 days after the mass germination. Aromatic and Vega varieties proved to be faster growing. The leaf mass of Orpheus and Fest was slightly slower. Vega and Orpheus plants had the lowest height – 23.6 cm and 25.4 cm, respectively. The next to increase the height of the leaf rosette was the Fest variety, whose plants reached 33.9 cm. The plants of the Pione variety were 35.1 cm high. The highest plant height in the experiment was Argon and Aromatnaya – 36.2 cm and 36.4 cm, respectively. Vega and Orpheus plants had the lowest productivity – 114 g and 160 g, respectively. The next variety as the productivity of the plant increased was the variety Argon with an index of 195 g. The plants of the control variety Aromatnaya had a productivity of 227 g. The plants of the varieties Fest and Pione had the highest productivity – 253 g and 255 g, respectively. The total yield of parsley leaf mass in the experiment averaged 5.01–10.20 kg/m2. Vega was the lowest and Fest and Pione the lowest.

Influence of agrochemical agents on biometric parameters of pear varieties in protected soil conditions

The article presents data on the study of the effect of foliar treatment with the mineral fertilizer «Idrofloral brand 14-11-22+8CaO» and the growth regulator «Stimoros» on the biometric parameters of pear seedlings with a closed root system in protected soil conditions. The research was conducted in 2018-2020 in the Orenburg branch of the Federal Horticultural Research Center for Breeding, Agrotechnology and Nursery. The objects of research were pear varieties of the summer ripening period Lada and Chizhovskaya. The seedlings were obtained by winter inoculation in the third decade of December. The drugs were used three times: 1st processing in the phase of the 5th present sheet, then 2 times with an interval of 10 days. The studied concentrations of non-root top dressing were determined according to the instructions for them. Biometric observations of seedlings were carried out according to the following parameters: seedling height (cm), number (pcs.) and leaf area (cm2 ). Mathematical processing of experimental data was carried out using the dispersion analysis according to B. A. Dospekhov. As a result of the conducted studies, the positive effect of these drugs on the growth and development of pear plants, different depending on the variety, was revealed. The greatest effectiveness on the Chizhovskaya variety was shown by the use of the mineral fertilizer «Idrofloral brand 14-11-22+8CaO» with a rate of application of 3.75 g/l, which contributed to an increase in the length of vegetative growth by an average of 45.6 %, the number of leaves — by 33.7 %, the foliage of seedlings-by 40.0 % compared to the control, thereby having a positive effect on the processes of formation and development of the leaf apparatus. In the Lada variety, the best results were noted when using the drug «Stimoros» at a dosage of 0.94 ml/l: the growth parameters of seedlings increased by 18.4 %, the number of leaves — by 12.1 %.

Lens Biometry in Congenital Lens Deformities: A Swept-Source Anterior Segment OCT Analysis

Aims: To investigate the lens biometric parameters in congenital lens deformities, using a novel technique of swept-source anterior segment optical coherence tomography (SS-ASOCT).Methods: This prospective study included patients with microspherophakia (MSP), coloboma lentis (CL), and posterior lenticonus (PL). For this cohort, 360-degree high-resolution lens images were obtained using the latest SS-ASOCT (CASIA2, Tomey Corp, Nagoya, Japan). The lens biometric parameters were calculated by the CASIA2 built-in software for anterior lens radius (ALR), posterior lens radius (PLR), anteroposterior distance (APD), anterior chamber depth (ACD), equatorial diameter (Eq Dia), rear projection length (RPL), and maximum diameter of the lesion (MDL).Results: This study included two eyes each with MSP and CL and one eye with PL. The lens of MSP was spherical and posteriorly dislocated, with decreased ALR and PLR, Eq Dia, but increased APD. In patients with CL, the coloboma was isolated, bilateral, inferior, and located toward the maldeveloped ciliary body. High astigmatism was mainly lenticular, and this was calculated by the ALR and PLR. Regarding the site of coloboma, a significant decrease in ALR was observed, while the PLR and APD were not affected. The PL eyes had a cone-shaped protrusion of the posterior lens surface with a subtle cataractous region around the apex. An extremely high posterior surface curvature was observed with a mean PLR of 1.67 mm. The RPL and MDL were about 1.80 and 0.4 mm, respectively, which were homogenous at different sections.Conclusions: The CASIA2 is a valuable option for in vivo crystalline lens measurement for congenital lens deformities, enabling the accurate diagnosis and providing illuminating insights into the pathogenesis of MSP, CL, and PL

Numerical Study of Customized Artificial Cornea Shape by Hydrogel Biomaterials on Imaging and Wavefront Aberration

The blindness caused by cornea diseases has exacerbated many patients all over the world. The disadvantages of using donor corneas may cause challenges to recovering eye sight. Developing artificial corneas with biocompatibility may provide another option to recover blindness. The techniques of making individual artificial corneas that fit the biometric parameters for each person can be used to help these patients effectively. In this study, artificial corneas with different shapes (spherical, aspherical, and biconic shapes) are designed and they could be made by two different hydrogel polymers that form an interpenetrating polymer network for their excellent mechanical strength. Two designed cases for the artificial corneas are considered in the simulations: to optimize the artificial cornea for patients who still wear glasses and to assume that the patient does not wear glasses after transplanting with the optimized artificial cornea. The results show that the artificial corneas can efficiently decrease the imaging blur. Increasing asphericity of the current designed artificial corneas can be helpful for the imaging corrections. The differences in the optical performance of the optimized artificial corneas by using different materials are small. It is found that the optimized artificial cornea can reduce the high order aberrations for the second case.

Analysis of Ocular Biometric Parameters in Patients with Cystoid Macular Edema

Relevance. Cataract surgeries are among the most frequently performed ophthalmic surgeries in the world. Despite the fact that they become less traumatic every year, such interventions are still accompanied by post-surgery complications, one of which is cystic macular edema (CME) or Irwin–Gass syndrome. Purpose. To analyze ocular biometric parameters in patients with CME. Material and Methods. The study included 40 patients (40 eyes) with post-surgery CME. All patients underwent ultrasound biometry, axial length measurement, crystalline lens thickness measurement with Bio&Pachy Meter AL-4000 (Tomey, Japan) and optical coherence tomography (OCT) with Cirrus HD-OCT 5000 (Carl Zeiss, Germany) to assess central foveal thickness. Depending on the axial length, all eyes were divided into “long” and “short” relative to the average axial length of 23.3 mm. The data was analyzed with STATISTICA 10 software (StatSoft Inc., USA). Results. The incidence of CME after uncomplicated cataract surgery in Cheboksary branch of the S. Fyodorov Eye Microsurgery Federal State Institution amounted to 0.002%. Axial length among patients with CME ranged from 20.53 mm to 25.4 mm; the average value amounted to 22.67 ± 1.05 mm. The majority of eyes were “short” – 31 eyes (77.5%), whereas 9 eyes (22.5%) were “long”. “Short” eyes exhibited a greater crystalline lens thickness (4.81 ± 0.53 mm) compared to “long” eyes (4.42 ± 0.42 mm) (рM-U = 0.014). Conclusion. The development of CME after uncomplicated cataract surgery is more often observed in eyes with axial length smaller than 23.3 mm.