scholarly journals Osteochondral defect - medial condyle of femur

2021 ◽  
Author(s):  
Bahman Rasuli
2018 ◽  
Vol 69 (9) ◽  
pp. 2501-2507
Author(s):  
Anca Plavitu ◽  
Mark Edward Pogarasteanu ◽  
Marius Moga ◽  
Mircea Lupusoru ◽  
Florentina Ionita Radu ◽  
...  

Our objective is to develop a novel method of approaching the arthroscopic treatment of osteochondral lesions within the knee joint by using mathematics as a way of understanding the geometry involved in the knee, both in normal and degenerated knee joint surfaces. Bone and cartilage lesions are frequent, whether as a result of trauma, degenerative pathology, vascular pathology (osteocondritis dissecans) or tumoral. In all cases, a defect can be repaired arthroscopically, if it has manageable dimensions and if the surgeon has the technological means and the necessary skills, through the use of grafts (autografts or allografts). Alternatively, a lesion that may be approached arthroscopically initially could prove to be too great for repair and may need a second intervention for reconstruction with an endoprosthesis. We aim to further deepen the surgeon�s understanding of this pathology, through the use of 3D technology as a way of representing the osteochondral defect. Thus, its dimensions and position may be better understood, and the surgical intervention may be better planned out, potentially resulting in a shorter operating time and an overall superior outcome for the patient, and even potentially diminishing the number of unnecessary surgeries performed.


2019 ◽  
Vol 36 (02) ◽  
pp. 072-084 ◽  
Author(s):  
Mohamed M.A. Abumandour ◽  
Naglaa Fathi Bassuoni ◽  
Samir El-Gendy ◽  
Ashraf Karkoura ◽  
Raafat El-Bakary

AbstractThe present work aims to provide more anatomical information on the stifle joint of the investigated species using computed tomography with gross anatomical cross-sections. The current work analyzed the stifle joint of the pelvic limbs of 12 adult donkeys, goats and dogs of both genders. The medial condyle of the femur was larger than the lateral one in the donkey, while it was smaller and lower than the lateral one in the goat and in the dog. The unsuitable femoral and tibial condyles were adapted by the presence of menisci. In the donkey, the medial meniscus was crescentic in shape, but it was semicircular in the goat, while in the dog, the medial and lateral menisci were C-shaped. In the donkey, the medial meniscus was larger than the lateral one, but in the goat and in the dog, the lateral meniscus was the largest, and more concave and thicker. The lateral meniscus was semicircular in the donkey, but it was shaped like an elongated kidney in the goat. In the goat and in the dog, the central border of two menisci was thin, concave and notched centrally. The meniscal ligaments included cranial and caudal ligaments of the medial and lateral menisci, and meniscofemoral ligament of the lateral meniscus. In the dog, the cranial ligament of the medial meniscus was absent, and the medial meniscus had no bony attachment to the tibia but it attached to the transverse intermeniscal ligament, which connected the cranial horn of the medial meniscus with the cranial ligament of the lateral meniscus. The meniscofemoral ligament connected the caudal pole of the lateral meniscus with the intercondyloid fossa of the femur.


Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1232
Author(s):  
Eva Petrovova ◽  
Marek Tomco ◽  
Katarina Holovska ◽  
Jan Danko ◽  
Lenka Kresakova ◽  
...  

Biopolymer composites allow the creation of an optimal environment for the regeneration of chondral and osteochondral defects of articular cartilage, where natural regeneration potential is limited. In this experimental study, we used the sheep animal model for the creation of knee cartilage defects. In the medial part of the trochlea and on the medial condyle of the femur, we created artificial defects (6 × 3 mm2) with microfractures. In four experimental sheep, both defects were subsequently filled with the porous acellular polyhydroxybutyrate/chitosan (PHB/CHIT)-based implant. Two sheep had untreated defects. We evaluated the quality of the newly formed tissue in the femoral trochlea defect site using imaging (X-ray, Computer Tomography (CT), Magnetic Resonance Imaging (MRI)), macroscopic, and histological methods. Macroscopically, the surface of the treated regenerate corresponded to the niveau of the surrounding cartilage. X-ray examination 6 months after the implantation confirmed the restoration of the contour in the subchondral calcified layer and the advanced rate of bone tissue integration. The CT scan revealed a low regenerative potential in the bone zone of the defect compared to the cartilage zone. The percentage change in cartilage density at the defect site was not significantly different to the reference area (0.06–6.4%). MRI examination revealed that the healing osteochondral defect was comparable to the intact cartilage signal on the surface of the defect. Hyaline-like cartilage was observed in most of the treated animals, except for one, where the defect was repaired with fibrocartilage. Thus, the acellular, chitosan-based biomaterial is a promising biopolymer composite for the treatment of chondral and osteochondral defects of traumatic character. It has potential for further clinical testing in the orthopedic field, primarily with the combination of supporting factors.


2020 ◽  
Vol 21 (19) ◽  
pp. 7374
Author(s):  
Gilberto Y. Nakama ◽  
Sabrina Gonzalez ◽  
Polina Matre ◽  
Xiaodong Mu ◽  
Kaitlyn E. Whitney ◽  
...  

Recent efforts have focused on customizing orthobiologics, such as platelet-rich plasma (PRP) and bone marrow concentrate (BMC), to improve tissue repair. We hypothesized that oral losartan (a TGF-β1 blocker with anti-fibrotic properties) could decrease TGF-β1 levels in leukocyte-poor PRP (LP-PRP) and fibrocytes in BMC. Ten rabbits were randomized into two groups (N = 5/group): osteochondral defect + microfracture (control, group 1) and osteochondral defect + microfracture + losartan (losartan, group 2). For group 2, a dose of 10mg/kg/day of losartan was administrated orally for 12 weeks post-operatively. After 12 weeks, whole blood (WB) and bone marrow aspirate (BMA) samples were collected to process LP-PRP and BMC. TGF-β1 concentrations were measured in WB and LP-PRP with multiplex immunoassay. BMC cell populations were analyzed by flow cytometry with CD31, CD44, CD45, CD34, CD146 and CD90 antibodies. There was no significant difference in TGF-β1 levels between the losartan and control group in WB or LP-PRP. In BMC, the percentage of CD31+ cells (endothelial cells) in the losartan group was significantly higher than the control group (p = 0.008), while the percentage of CD45+ cells (hematopoietic cells-fibrocytes) in the losartan group was significantly lower than the control group (p = 0.03).


2011 ◽  
Vol 7 (3) ◽  
pp. 1184-1191 ◽  
Author(s):  
Rachael A. Oldinski ◽  
Timothy T. Ruckh ◽  
Mark P. Staiger ◽  
Ketul C. Popat ◽  
Susan P. James

Author(s):  
Alexander J. Nedopil ◽  
Peter J. Thadani ◽  
Thomas H. McCoy ◽  
Stephen M. Howell ◽  
Maury L. Hull

AbstractMost medial stabilized (MS) total knee arthroplasty (TKA) implants recommend excision of the posterior cruciate ligament (PCL), which eliminates the ligament's tension effect on the tibia that drives tibial rotation and compromises passive internal tibial rotation in flexion. Whether increasing the insert thickness and reducing the posterior tibial slope corrects the loss of rotation without extension loss and undesirable anterior lift-off of the insert is unknown. In 10 fresh-frozen cadaveric knees, an MS design with a medial ball-in-socket (i.e., spherical joint) and lateral flat insert was implanted with unrestricted calipered kinematic alignment (KA) and PCL retention. Trial inserts with goniometric markings measured the internal–external orientation relative to the femoral component's medial condyle at maximum extension and 90 degrees of flexion. After PCL excision, these measurements were repeated with the same insert, a 1 mm thicker insert, and a 2- and 4-mm shim under the posterior tibial baseplate to reduce the tibial slope. Internal tibial rotation from maximum extension and 90 degrees of flexion was 15 degrees with PCL retention and 7 degrees with PCL excision (p < 0.000). With a 1 mm thicker insert, internal rotation was 8 degrees (p < 0.000), and four TKAs lost extension. With a 2 mm shim, internal rotation was 9 degrees (p = 0.001) and two TKAs lost extension. With a 4 mm shim, internal rotation was 10 degrees (p = 0.002) and five TKAs lost extension and three had anterior lift-off. The methods of inserting a 1 mm thicker insert and reducing the posterior slope did not correct the loss of internal tibial rotation after PCL excision and caused extension loss and anterior lift-off in several knees. PCL retention should be considered when using unrestricted calipered KA and implanting a medial ball-in-socket and lateral flat insert TKA design, so the progression of internal tibial rotation and coupled reduction in Q-angle throughout flexion matches the native knee, optimizing the retinacular ligaments' tension and patellofemoral tracking.


Sign in / Sign up

Export Citation Format

Share Document