ENHANCEMENT OF FOLLICULAR DELIVERY OF FINASTERIDE IN NIOSOMALAND PRONIOSOMAL GEL FORM FOR TREATING ANDROGENETIC ALOPECIA

INDIAN DRUGS ◽  
2012 ◽  
Vol 49 (05) ◽  
pp. 47-55
Author(s):  
K. R Vimal ◽  
◽  
V Sankar ◽  
C. R Srinivas ◽  
M. Kumaresan
Keyword(s):  
In Vitro Release ◽  
Test Group ◽  
Hair Shaft ◽  
Androgenetic Alopecia ◽  
Skin Permeability ◽  
Control Group ◽  
Androgenic Alopecia ◽  
Anagen Hair ◽  
Dicetyl Phosphate

Finasteride has not been explored extensively for the treatment of androgenic alopecia. The present workwas aimed to enhance the follicular delivery of finasteride topically by niosomal and proniosomal carriersystems for treating androgenetic alopecia. Finasteride niosomes were prepared by thin film hydrationmethod and proniosomes were prepared by coacervation phase separation method. The niosomesprepared with cholesterol-Span 20 (1:1) and proniosmes prepared with cholesterol-Span 20 (1:1) showedbetter mean vesicle size, drug content, in vitro release profile and skin permeability. The effect of chargeinducer, dicetyl phosphate (DCP) on skin permeability of niosomes and proniosomes was studied and itwas found to be less in this study. Stability studies were preformed and the formulation was found to bestable for 60 days. Clinical trials by phototrichogram method was performed for proniosomal formulationwith cholesterol-Span 20 (1:1) and DCP on twenty healthy male volunteers and it was found to increasethe anagen hair count of test group by 42.85 % when compared with the control group (6.6%), indicatingthe proniosomal gel formulation achieved the objective of enhancing the drug concentration in androgenicreceptors of hair shaft and thus it can be used safely for treating androgenic alopecia.

scholarly journals Milled versus moulded mock-ups based on the superimposition of 3D meshes from digital oral impressions: a comparative in vitro study in the aesthetic area

2019 ◽  
Vol 19 (1) ◽  
Author(s):  
Francesca Cattoni ◽  
Giulia Teté ◽  
Alessandro Mauro Calloni ◽  
Fabio Manazza ◽  
Giorgio Gastaldi ◽  
...  
Keyword(s):  
Statistical Analysis ◽  
Test Group ◽  
In Vitro Study ◽  
Mean Value ◽  
Digital Impression ◽  
Control Group ◽  
Minimal Invasiveness ◽  
Significant Difference ◽  
The Aesthetic

Abstract Background Aesthetic porcelain veneers proved to be a long-term reliable prosthetic solution, ensuring minimal invasiveness. The use of veneers requires an adhesive cementation technique, so maintaining as much enamel as possible is to ensure lasting success. A diagnostic mock-up is a key tool that allows a preview of the outcome of the aesthetic restoration: it is obtainable both in an analog and digital way. With the recent developments in impression technology and the ever so fast growing use of CAD-CAM technologies it is useful to understand the pros and cons of either one of these techniques (analog and digital) in order to identify the easier and more convenient workflow in aesthetic dentistry. Methods After taking pictures and impressions of the dental arcs of a patient in need of aesthetic rehabilitation, 52 resin models were produced and a digital drawing of the smile was outlined. Both an analog and a digital wax-up were obtained from two of the 52 models: the latter was obtained using digital impressions and a dedicated software. The analog wax-up was then used to produce 25 matrices that have later been used to mould 25 resin mock-ups using a traditional moulding protocol (Control Group - CG). The digital wax-up was used to mill 25 PMMA mock-ups. Each mock-up, both milled and moulded (total 50), was then laid on the other 50 resin models as a digital impression of it was taken. The STL. files of the milled mock-ups were compared with the 3D CAD wax-up made using a specific software. The STL. files of the analog printed mock-ups were compared with the traditional wax-up design. A statistical analysis was carried out to evaluate the difference between the groups. Results The statistical analysis showed a significant difference (P > 0.01) between the mean value of the distance between the points of the overlapping STL. meshes in GC (0.0468 mm) and in TG (Test Group - TG) (0,0109 mm). Conclusions The study showed a difference in accuracy between traditional moulded and milled mock-ups compared to their original wax-up. The data analysis reports that the digital method allows for greater accuracy. Within the limitations of this study, a fully digital workflow is to considered more reliable when it come to creating an esthetic mockup: the digital procedure has been shown to be more accurate than the one made manually which is much more operator dependent and it brings an increase to the chance of error, and that could ultimately affect the final result.

scholarly journals Comparison of the Efficacy of Different Fluoride Varnishes on Dentin Remineralization During a Critical pH Exposure Using Quantitative X-Ray Microtomography

2018 ◽  
Vol 43 (6) ◽  
pp. E308-E316
Author(s):  
A Sleibi ◽  
A Tappuni ◽  
D Mills ◽  
GR Davis ◽  
A Baysan
Keyword(s):  
Calcium Phosphate ◽  
Amorphous Calcium Phosphate ◽  
Mineral Content ◽  
Test Group ◽  
Control Group ◽  
Mineral Concentration ◽  
Voxel Size ◽  
X Ray ◽  
Casein Phosphopeptide

SUMMARY Objectives: The objective of this in vitro study was to quantify the amount of mineral change in demineralized dentin at pH 5.5 after the application of dental varnishes containing fluoride with casein phosphopeptide–amorphous calcium phosphate, fluoride and bioglass, or fluoride alone. Methods and Materials: A total of 12 extracted human sound mandibular premolar root samples were coated with an acid-resistant varnish, leaving a 2 × 3 mm window at the outer root surface. These root specimens were then randomly divided into four groups and separately subjected to the demineralizing cycle at a pH of 4.8 for five days to create artificial caries-like lesions in dentin. Subsequently, each sample was imaged using quantitative x-ray microtomography (XMT) at a 15-μm voxel size. Each test group then received one of the following treatments: dental varnish containing casein phosphopeptide–amorphous calcium phosphate and fluoride (CPP-ACP, MI varnish, GC Europe), bioglass and fluoride (BGA, Experimental, Dentsply Sirona), or fluoride alone (NUPRO, Dentsply Sirona), as well as a control group, which received no treatment. These samples were kept in deionized water for 12 hours. The thin layer of varnish was then removed. All samples including the nonvarnish group were subjected to the second demineralizing cycle at pH 5.5 for five days. The final XMT imaging was then carried out following the second demineralizing cycle. XMT scan was also carried out to varnish samples at 25 μm voxel size. The change in mineral concentration in the demineralized teeth was assessed using both qualitative and quantitative image analysis. Results: There was an increase in radiopacity in the subtracted images of all varnish groups; a significant increase in mineral content, 12% for the CPP-ACP and fluoride (p≤0.05 and p≤0.001), 25% BGA (p≤0.001), and 104% fluoride alone varnish (p≤0.001). There was an increase in the size of radiolucency in the lesion area with a significant decrease in mineral content in the nonvarnish group, 10% (p≤0.05 and p≤0.001). Conclusions: There was encouraging evidence of a remineralization effect following the application of dental varnish on dentin and also an observed resistance to demineralization during the acidic challenge in all cases. However, a dental varnish containing fluoride alone appeared to have a much greater effect on dentin remineralization when compared with CPP-ACP with fluoride and bioglass with fluoride.

Antioxidant potential of thyme extract: alleviation of N-nitrosodiethylamine-induced oxidative stress

2008 ◽  
Vol 27 (3) ◽  
pp. 215-221 ◽  
Author(s):  
P Rana ◽  
G Soni
Keyword(s):  
Oxidative Stress ◽  
Body Weight ◽  
Test Group ◽  
Normal Diet ◽  
Lower Degree ◽  
Control Group ◽  
Albino Rats ◽  
Stress Induction ◽  
And Control

Protective role of thyme extract against N-nitrosodiethylamine (NDEA)-induced oxidative stress has been evaluated in albino rats. For this, one group of rats were fed diet supplemented with thyme extract (0.5%) and served as the test group, whereas animals of the other group fed on normal diet served as the control group. The rats were fed on respective diets for a period of 2 weeks after which stress was induced to half the animals of each group by i.p. administration of NDEA at 200 mg/kg body weight. Animals were killed 48 h post stress-induction period. Feed intake and body weight decreased significantly in both test and control groups, the effect being less in test group. Increase in osmotic fragility and in-vitro lipid peroxidation (LPO) on stress induction was of lower degree in the test group. NDEA toxicity was mainly reflected in liver as evidenced by increased activities of plasma aspartate aminotransferase, alanine aminotransferase, and alkaline phosphatase. The effect was of lower degree in test group as compared with that in the control group. Increase in urea levels observed following NDEA administration was also of lower degree in test groups. Blood glutathione (GSH) levels increased more so in test group compared with control group on stress induction. The activities of superoxide dismutase (SOD), peroxidase (Px), and catalase (CAT) activities decreased significantly on stress induction in erythrocytes. LPO increased in all the tissues through varying degree, and the increase was appreciably of lower degree in test group. The activity of SOD increased significantly in both test and control group on stress induction, whereas activities of Px and CAT decreased following NDEA treatment, and the effects were of lower degree in test group. Thus, supplementation of diet with thyme extract can improve antioxygenic potential and hence help to prevent oxidative stress.

scholarly journals Phenotypic aspects of oral strains of Candida albicans in children with down's syndrome

2006 ◽  
Vol 66 (3) ◽  
pp. 939-944 ◽  
Author(s):  
E. L. Ribeiro ◽  
M. L. Scroferneker ◽  
M. S. Cavalhaes ◽  
C. C. Campos ◽  
G. M. Nagato ◽  
...  
Keyword(s):  
Inhibitory Concentration ◽  
Down's Syndrome ◽  
Test Group ◽  
Down’S Syndrome ◽  
Antifungal Drugs ◽  
Control Group ◽  
Broth Microdilution ◽  
In Vitro Susceptibility ◽  
Biological Aspects

The aim of this article is to characterize the biological aspects of oral strains of C. albicans in children with Down's syndrome. These yeasts were analyzed as to their macromorphological and enzymatic aspects and were tested as to their in vitro susceptibility to antifungal drugs using broth microdilution to determine the minimum inhibitory concentration (MIC). The morphotyping revealed that all oral C. albicans isolates from children with Down's syndrome promoted the formation of fringes regardless of size, while the control group presented smaller fringes. All oral C. albicans strains produced proteinase, but those with phospholipolytic activity showed greater enzyme capacity in the test group. In vitro susceptibility showed that all oral C. albicans isolates were sensitive to the drugs used.

Evaluation of fissure sealant applied to topical fluoride treated teeth

2005 ◽  
Vol 29 (3) ◽  
pp. 215-219 ◽  
Author(s):  
Azza El-Housseiny ◽  
Aly Sharaf
Keyword(s):  
Test Group ◽  
Acid Etching ◽  
Control Group ◽  
Fissure Sealant ◽  
Fluoride Treatment ◽  
Permanent Molars ◽  
And Control ◽  
Topical Fluoride ◽  
Sealant Retention

Fissure sealant is an important tool in the prevention of dental caries. This study evaluated the effect of treating the enamel with topical fluoride gel prior to acid etching on sealant retention clinically (Part I) and in vitro (Part II). In part I a split mouth design using contralateral first permanent molars was conducted. Seventy (35 pairs) molars were sealed. Fissure sealant was applied on one side of the mouth (control group) and the contralateral tooth received acidulated phosphate fluoride gel (test group) prior to acid etching. The sealant was evaluated after 6 and 12 months and scored as intact, partially lost or completely missing. In part II, the shear bond strength between sealant and buccal enamel of extracted permanent molars without or with topical fluoride treatment was evaluated. Results showed no statistically significant differences between the test and control groups either clinically or in vitro. It is concluded that topical fluoride application prior to acid etching does not have a deleterious effect on sealant retention. However, further investigations should be conducted using different types of fluoride before altering the traditional practices.

scholarly journals Evaluation of the apical microleakage of MTA Fillapex, AH26, and Endofill sealers

2020 ◽  
Vol 23 (3) ◽  
Author(s):  
Saeedeh Galledar ◽  
Robab Farhang ◽  
Malek Abazari ◽  
Parisa Negahdar
Keyword(s):  
Root Canal ◽  
Test Group ◽  
In Vitro Study ◽  
Negative Control ◽  
Vitro Study ◽  
Control Group ◽  
Dye Penetration ◽  
Gutta Percha ◽  
Significant Difference

Objective: Proper apical seal plays an important role in the success of root canal treatment. The most common cause of failure of root canal therapy is known as the lack of adequate apical seal. The aim of this in vitro study was to compare the apical microleakage of MTA Fillapex, , and Endofill sealers using dye penetration method. Material and Methods: In this in vitro study, 72 single-rooted extracted human teeth were selected. The teeth were randomly divided into three experimental groups of 20 and two positive and negative control groups of 6. The canals were prepared by step-back technique and then filled with gutta-percha and one of the sealers mentioned. In the positive control group, the canals were filled with gutta-percha without sealer, and in the negative control group, the canals were prepared but not filled. The teeth were immersed in 2% methylene blue dye for 72 hours. The teeth were then cut longitudinally and the level of dye penetration was measured under a stereomicroscope. Data were analyzed by SPSS ver. 19 software, ANOVA and Bonferroni post-hoc tests. Results: The mean level of dye penetration in the Endofill test group was significantly higher than that in the  and MTA Fillapex test groups. While, the observed difference between  and MTA Fillapex groups was not statistically significant (p<0.05). Conclusion: The results of this study showed that  and MTA Fillapex sealers did not show any significant difference in apical seal properties. However, their sealing strength was significantly greater than Endofill sealer.KeywordsAH26 sealer; Endofill; MTA Fillapex; Microleakag

scholarly journals Effects of Additional Use of Bioactive Glasses or a Hydroxyapatite Toothpaste on Remineralization of Artificial Lesions in vitro

2020 ◽  
Vol 54 (4) ◽  
pp. 336-342
Author(s):  
Philipp Körner ◽  
Jana A Schleich ◽  
Daniel B. Wiedemeier ◽  
Thomas Attin ◽  
Florian J. Wegehaupt
Keyword(s):  
Bioactive Glass ◽  
Artificial Saliva ◽  
Test Group ◽  
In Vitro Study ◽  
Negative Control Group ◽  
Negative Control ◽  
Control Group ◽  
Bioactive Glasses ◽  
Initial Caries

<b><i>Objectives:</i></b> This in vitro study aimed to evaluate and compare the effect of two different bioactive glasses, a hydroxyapatite-containing, fluoride-free toothpaste (HTP) and a fluoride toothpaste (FTP) on the remineralization behavior of initial caries lesions. <b><i>Materials and Methods:</i></b> A total of 100 bovine enamel samples were randomly allocated to five groups of 20 samples each: NC = negative control group (artificial saliva); HTP = HTP group (Karex); FTP = FTP group (Elmex caries protection, 1,400 ppm); FTP + BG<sub>nano</sub> = FTP followed by Actimins bioactive glass; FTP + BG<sub>amorph</sub> = FTP followed by Schott bioactive glass. Radiographic documentation (advanced transversal microradiography; aTMR) was applied before and after all samples were exposed to a demineralizing gel for 10 days. Over a period of 28 days, samples were covered twice a day (every 12 h) with a toothpaste slurry of the respective test group or with artificial saliva in NC for 60 s and brushed with 15 brushing strokes. Samples in FTP + BG<sub>nano</sub> and FTP + BG<sub>amorph</sub> were additionally treated with the respective bioactive glass slurry for 30 s after brushing with the FTP. In the meantime, all samples were stored in artificial saliva. After 28 days, the structure of all samples was assessed again using aTMR and compared to the values measured after demineralization. The statistical evaluation of the integrated mineral loss was performed using Kruskal-Wallis test followed by a post hoc Conover test. <b><i>Results:</i></b> The FTP revealed the significantly highest increase of mineral content while the HTP showed the significantly lowest remineralization. Compared to artificial saliva, the use of the HTP or the combined application of FTP followed by bioactive glasses (FTP + BG<sub>nano</sub> and FTP + BG<sub>amorph</sub>) showed no significant remineralization. <b><i>Conclusion:</i></b> Under remineralizing in vitro conditions, brushing with 1,400 ppm FTP induced significantly more remineralization compared to storage in artificial saliva. The additional administration of both bioactive glasses as well as the substitutional brushing with an HTP resulted in significantly less remineralization compared to brushing with 1,400 ppm FTP.

scholarly journals Feasibility of Using a Prosthetic-Based Impression Template to Improve the Trueness and Precision of a Complete Arch Digital Impression on Four and Six Implants: An In Vitro Study

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3543
Author(s):  
Marco Tallarico ◽  
Aurea Lumbau ◽  
Roberto Scrascia ◽  
Gianluca Demelas ◽  
Franco Sanseverino ◽  
...  
Keyword(s):  
Test Group ◽  
In Vitro Study ◽  
Original Model ◽  
Vitro Study ◽  
Digital Impression ◽  
Control Group ◽  
Angle Deviation ◽  
Edentulous Mandible ◽  
The Mean

Background: Intraoral scanners (IOSs) in implantology represent a viable approach for single teeth or partial arches. However, when used for complete edentulous arches or long-span edentulous areas, it has been demonstrated that there is a need for improvement of IOS-related techniques. Therefore, the aim of this in vitro study was to assess the trueness and precision of a complete arch digital impression on four and six implants taken with or without a customized, prosthetic-based impression template. Materials and Methods: Two experimental models were prepared, representative of a complete edentulous mandible restored with four and six implants with built-in scan abutments. Models were scanned with (test group, TG) or without (control group, CG) the prosthetic-based impression template. Eight scans were taken for each model. The time needed to take impressions, error, trueness, and precision were evaluated. A statistical analysis was performed. Results: In the case of four implants, the time needed for the impression was 128.7 ± 55.3 s in the TG and 81.0 ± 23.5 s in the CG (p = 0.0416). With six scan abutments, the time was 197.5 ± 26.8 and 110.6 ± 25.2 s in the TG and CG, respectively (p = 0.0000). In the TG, no errors were experienced, while in the CG, 13 impressions were retaken due to incorrect stitching processes. In the four-implant impression, the mean angle deviation was 0.252 ± 0.068° (95% CI 0.021–0.115°) in the CG and 0.134 ± 0.053° (95% CI 0.016–0.090°) in the TG. The difference was statistically significant (p = 0.002). In the six-implant impression, the mean angle deviation was 0.373 ± 0.117° (95% CI 0.036–0.198°) in the CG and 0.100 ± 0.029° (95% CI 0.009–0.049°) in the TG (p = 0.000). In the TG, there were no statistically significant differences in the mean angle deviation within the group (p > 0.05), but there were in the CG. A colorimetric analysis showed higher deviations from the original model for the six-implant impression without a prosthetic template. Conclusions: Although all of the impressions exhibited deviation from the original model in the range of clinical acceptability, the prosthetic-based impression template significantly improved the trueness and precision of complete edentulous arches rehabilitated with four or six implants, making the complete arch digital impression more predictable.

scholarly journals Microbiological and SEM-EDS Evaluation of Titanium Surfaces Exposed to Periodontal Gel: In Vitro Study

Materials ◽  
2019 ◽  
Vol 12 (9) ◽  
pp. 1448 ◽  
Author(s):  
Sara Bernardi ◽  
Serena Bianchi ◽  
Anna Rita Tomei ◽  
Maria Adelaide Continenza ◽  
Guido Macchiarelli
Keyword(s):  
Inflammatory Diseases ◽  
Test Group ◽  
In Vitro Study ◽  
Positive Control ◽  
Control Group ◽  
Anaerobic Conditions ◽  
Titanium Surfaces ◽  
Implant Dentistry

Inflammatory diseases affecting the soft and hard tissues surrounding an implant represent a new challenge in contemporary implant dentistry. Among several methods proposed for the decontamination of titanium surfaces, the administration of topical 14% doxycycline gel seems to be a reliable option. In the present study, we evaluated the microbial effect of 14% doxycycline gel applied on titanium surfaces and exposed to human salivary microbes in anaerobic conditions. We also examined the composition of the exposed surfaces to assess the safe use of periodontal gel on titanium surfaces. Six anatase and six type 5 alloy titanium surfaces were used and divided into two groups: The test group and the positive control group. Both were cultured with human salivary samples in anaerobic conditions. On the test groups, 240 mg of periodontal gel was applied. The microbial assessment was performed with a colony-forming unit (CFU) count and matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) to identify the species. The surface integrity was assessed using scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDS). The results demonstrated the microbial efficacy of the 14% doxycycline periodontal gel and its safe use on titanium surfaces. However, the SEM observations revealed the permanence of the gel on the titanium surfaces due to the physical composition of the gel. This permanence needs to be further investigated in vivo and a final polishing protocol on the titanium surface is recommended.

The Mechanism of Human Umbilical Mesenchymal Stem Cells (HUMSC) on Biological Behavior of Human Papillomavirus (HPV) Cells Through Restraining the Programmed Cell Death Protein 1/Programmed Cell Death Ligand 1 (PD-1/PD-L1) Signal Pathway

2022 ◽  
Vol 12 (2) ◽  
pp. 265-272
Author(s):  
Min Wang ◽  
Yanong Zhu ◽  
Tongmin Li ◽  
Chaofeng Xia
Keyword(s):  
Cell Death ◽  
Test Group ◽  
Signal Pathway ◽  
Biological Behavior ◽  
Control Group ◽  
Migration Ability ◽  
Blank Group ◽  
Invasion And Migration ◽  
And Migration

Biological behavior of HPV cell was observed by HUMSC through restraining PD-1/PD-L1 signal pathway. And HUMSC was adopted as target cell for the treatment on HPV. The rat HPV model was established and divided into three groups including blank group, control group and test group according to different reagents being injected into rats. Use HE staining method to observe the cancerous transformation of tumor tissue sections. The gene presentation of PD-1/PD-L1 and lymphocyte was detected with Western blot. The invasion and migration condition of cancer cells was observed from experiment in vitro. The quantity of cancer cells in test group was the least. And invasion and migration ability in test group was the weakest. The control group was the second. The number of tumor cells in the blank group was the largest. Strongest ability to invade and migrate. The presentation of PD-L1 was restrained partly by HUMSC. The increasing of immune-associated cells could be prompted by HUMSC. The quantity of CD3+, CD4+ and CD8+ in PB was the most in test group. The expression of blank groups is the lowest than others restrained by HUMSC. And quantity of abundant immune cells including CD3+, CD4+ and CD8+ could be activated partly through activating immune action of body. And monitoring function of immune system on HPV cells could be increased effectively. The invasion and migration ability in vitro of HPV could be reduced partly.

Sign in / Sign up

Export Citation Format

Share Document