scholarly journals Potassium and Nitrogen Fertigation Frequency on Pineapple Yield and Fruit Quality

2019 ◽  
Vol 11 (6) ◽  
pp. 416
Author(s):  
Ana Maria Alves de Souza Ribeiro ◽  
Robson Bonomo ◽  
Moises Zucoloto ◽  
Fábio Oseias dos Reis da Silva ◽  
Mariana Vasconcelos Barroca ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Block Design ◽  
Titratable Acidity ◽  
Additional Treatment ◽  
Soluble Solids ◽  
Fruit Characteristics ◽  
Physical Chemical ◽  
Randomized Block Design ◽  
Crop Cycle ◽  
Fruit Mass

Pineapple is a nutritionally demanding crop, with emphasis on potassium and nitrogen nutrients. In this context, the aim of this paper was to study the effect of nitrogen (N) and potassium (K) fertigation frequencies on the physical-chemical fruit characteristics of ‘Pérola’ pineapple crop. The experiment was conducted in a randomized block design, with 18 treatments and 4 replications. It was used a factorial scheme (4 × 4) + 1 + 1, which represents: four N fertigation frequencies applied by surface drip irrigation (4, 7, 27 and 54 times throughout the crop cycle); four K fertigation frequencies (4, 9, 35 and 70 times); one additional treatment (irrigated, but without fertigation); and one control (non irrigated and non fertigated). The fruit characteristics analyzed were: fruit mass with crown, yield, soluble solids, pH, titratable acidity and SS/TA ratio. The N fertigation frequencies had no effect on variables evaluated, however, the K frequencies had a significant influence on fruit mass with crown, yield and pH. The results showed that the effect of K frequencies applied through fertigation on pineapple yield and fruit physical-chemical quality was more pronounced in comparison to the effect of N applications. Monthly potassium fertigations, followed by four applications throughout the crop cycle, provided the greatest increase in fruit quality, allowing higher values of fruit mass, yield and pH.

scholarly journals Fruit quality of ‘Eva’ e ‘Princesa’ apples grown under nitrogen fertigation in semiarid climate

2015 ◽  
Vol 19 (10) ◽  
pp. 967-972 ◽  
Author(s):  
João M. de S. Miranda ◽  
Ítalo H. L. Cavalcante ◽  
Inez V. de M. Oliveira ◽  
Paulo R. C. Lopes ◽  
Joston S. de Assis
Keyword(s):  
Fruit Quality ◽  
Skin Color ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Economic Viability ◽  
Fruit Firmness ◽  
Fruit Characteristics ◽  
Apple Cultivars ◽  
Fruit Mass

ABSTRACTThe production of high quality fruits is a necessary factor for the adaptation and production of plant species with economic viability. Thus, an experiment was conducted from July 2012 to January 2013 to evaluate the fruit quality of the ‘Eva’ and ‘Princesa’ apple cultivars as a function of nitrogen fertilization in Petrolina, PE, Brazil. The experimental design consisted of randomized blocks, with treatments distributed in a factorial arrangement 2 x 4, corresponding to apple cultivars (Eva and Princesa) and nitrogen doses (40; 80; 120 and 160 kg of N ha-1), with four replications and three plants in each plot. The fruit characteristics, such as fruit mass, skin color (luminosity, chromaticity, and colour angle), size (width and length), pulp firmness, titratable acidity (TA), soluble solids (SS) and the SS/TA ratio, were recorded. Nitrogen doses do not affect fruit quality of studied apple cultivars. The fruit quality attributes are different between apple cultivars: fruit firmness, SS/TA ratio, fruit mass and fruit diameter are superior for Princesa cultivar, while the fruit length for Eva cultivar is superior.

scholarly journals Quality of Italian tomatoes grown with different forms of calcium application

2020 ◽  
Vol 9 (12) ◽  
pp. e10191210837
Author(s):  
Isa Gabriela Vieira de Andrade ◽  
Gilmário Noberto de Souza ◽  
Eduardo Santana Aires ◽  
Ítala Laiane Silva Gomes ◽  
Ruy de Carvalho Rocha ◽  
...  
Keyword(s):  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Fruit Firmness ◽  
Post Harvest ◽  
Randomized Block Design ◽  
Randomized Design ◽  
Tree Fruits ◽  
Fruit Mass

Tomato is one of the most consumed vegetables in the world. This work aimed to evaluate post-harvest quality of Italian Saladete tomatoes grown in a protected environment, with different ways of calcium application, in the Middle São Francisco Valley. Consisting of five Italian tomato hybrids (Anjico, Gabrielle, Liberty, Ty 2006 and Shanty), and three different ways of calcium application (T0 without application of calcium; T1 application of calcium in the opening flower, and T2 weekly application of calcium in the fruit).  Poductivity, average fruit mass, incidence of apical rot, fruit firmness, soluble solids (SS), titratable acidity (AT), and pH, were analized. The experimental design used was a completely randomized block design in a factorial scheme (five cultivars x three ways of calcium application), with three repetition and using two central plants as useful plot for analysis, except for fruit firmness that was carried out in a completely randomized design, using tree fruits per analysis. According to the results obtained, hybrids of Italian saladete tomatoes behaved in a satisfactory manner, therefore it is recommended to cultivate hybrids of Italian saladete tomatoes in the Middle São Francisco Valley, mainly hybrid Anjico. Calcium application way did not interfere with post-harvest attributes.

Pruning Intensity and Lopping System in Fig Plants in the Brazilian Semiarid Region

2019 ◽  
pp. 1-9
Author(s):  
Francisco Sidene Oliveira Silva ◽  
Vander Mendonça ◽  
Anderson Araujo Alves ◽  
Wagner Cesar De Farias ◽  
Elizangela Cabral Dos Santos ◽  
...  
Keyword(s):  
Block Design ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Semiarid Region ◽  
Physical Chemical ◽  
Randomized Block Design ◽  
Brazilian Semiarid ◽  
Fig Trees ◽  
Pruning Intensity

Aims: Fig plants produce fruits in branches of the year, which grow after emission of buds from the leaf armpits. And the lopping system is one of the most common practices among the green fig farmers to increase production. Thus, the present work aimed to improve the physical, chemical and productive characteristics of fig trees in the semiarid region of Brazil. Study Design: A complete randomized block design was used in a 3x2 factorial scheme (three pruning intensities: 5, 10 and 15 cm in length; and two lopping systems: with and without lopping), constituting six treatments with four replicates. Each experimental plot consisted of five plants, but only the three central plants were used. Place and Duration of Study: The experiment was conducted in the didactic orchard of the Federal Rural University of Semiarid (UFERSA), Mossoró, RN. Methodology: The treatments were: 5 cm pruning without lopping; 5 cm pruning with lopping; 10 cm pruning without lopping; 10 cm pruning with lopping; 15 cm pruning without lopping; 15 cm pruning with lopping. The following variables were analyzed: fruit weight (g), fruit length (cm), fruit diameter (cm), pulp firmness (N), soluble solids content (ºBrix), titratable acidity (%), vitamin C content (mg ascorbic acid 100 g-1 pulp), fruit yield (number of fruits plant-1 and kg plant-1). Data were submitted to analysis of variance by the F test at 5% probability and means were grouped using the Tukey test at 5% probability. The analysis was performed using R software version 3.5.2. Conclusion: Pruning intensity 10 cm in length and the use of lopping system influenced the physical, chemical and productive characteristics of fig plants in the Brazilian semiarid region.

scholarly journals Repeatability coefficients and number of measurements for evaluating traits in strawberry

2020 ◽  
Vol 42 ◽  
pp. e43357 ◽  
Author(s):  
Maria Inês Diel ◽  
Alessandro Dal'Col Lúcio ◽  
Tiago Olivoto ◽  
Marcos Vinícius Marques Pinheiro ◽  
Dionatan Ketzer Krysczun ◽  
...  
Keyword(s):  
Principal Component Analysis ◽  
Block Design ◽  
Principal Component ◽  
Titratable Acidity ◽  
Component Analysis ◽  
Soluble Solids ◽  
Repeatability Coefficient ◽  
Randomized Block Design ◽  
Crop Cycle ◽  
Substrate Mixtures

The objective of this study was to estimate the coefficient of repeatability and the number of measurements required for production and quality variables in a strawberry crop. An experiment was conducted with two strawberry cultivars from two origins grown in four substrate mixtures, totaling 16 treatments, evaluated in a randomized block design with four replications. Mass (MF) and number (NF) of fruits per plant were evaluated as measures of production, and total soluble solids (SST), titratable acidity (AT) and firmness (FIR) of fruits during the crop cycle were evaluated as measures of quality. Subsequently, the repeatability coefficient was estimated by the following methods: analysis of variance (ANOVA), principal component analysis using a correlation matrix (PCcor), principal component analysis using a variance-covariance matrix (PCcov) and structural analysis (SA). The number of measurements was adjusted for each studied variable based on determination coefficients of 0.80, 0.85, 0.90, and 0.95. The repeatability coefficients ranged from low to medium. The ANOVA method gave the lowest r values, while the PCcov method presented the highest values of r. When using the PCcov method, 3.6, 2.9, 6.2, 3.2, and 3.8 measurements were needed to reach 80% confidence for the variables MF, NF, SST, AT, and FIR, respectively, and this increased to 7.3, 14.0, 29.6, 15.4, and 18.1 for 95% confidence in the results for MF, NF, SST, AT, and FIR, respectively.

scholarly journals Yield of 'Royal Gala' apple trees in response to pruning before or after leaf drop

2018 ◽  
Vol 53 (4) ◽  
pp. 427-434
Author(s):  
Gustavo Klamer de Almeida ◽  
João Caetano Fioravanço
Keyword(s):  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Yield Reduction ◽  
Apple Trees ◽  
Randomized Block Design ◽  
Leaf Drop ◽  
Natural Leaf ◽  
Old Trees ◽  
Fruit Mass

Abstract: The objective of this work was to evaluate different pruning times, performed before or after natural leaf drop, regarding their effects on the yield of 'Royal Gala' apple (Malus domestica) trees. The experiment was carried out in Vacaria, in the state of Rio Grande do Sul, Brazil, on seven-year-old trees in four harvests from 2008/2009 to 2011/2012, using a randomized block design. The following pruning times were tested: 46 days before leaf drop (DBLD); 25 DBLD; 5 DBLD; 15 days after leaf drop (DALD); 36 DALD; 55 DALD; and 75 DALD. All pruning times before natural leaf drop reduced yield per tree and fruit set. Among the pruning times before leaf drop, 46 DBLD resulted in the lowest yield. Pruning performed after natural leaf drop, still during dormancy, resulted in a higher yield per tree, in comparison with pruning times before leaf drop. The effect of pruning times on average fruit mass, pulp firmness, content of soluble solids, titratable acidity, and soluble solids/titratable acidity ratio differed between harvest years. Pruning performed at different times, before natural leaf drop, causes yield reduction in 'Royal Gala' apple trees, and the pruning time at 46 DBLD results in the lowest yield.

scholarly journals Can Sustained Deficit Irrigation Save Water and Meet the Quality Characteristics of Mango?

Agriculture ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 448
Author(s):  
Leontina Lipan ◽  
Aarón A. Carbonell-Pedro ◽  
Belén Cárceles Rodríguez ◽  
Víctor Hugo Durán-Zuazo ◽  
Dionisio Franco Tarifa ◽  
...  
Keyword(s):  
Irrigation Water ◽  
Deficit Irrigation ◽  
Block Design ◽  
Water Productivity ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Total Phenolic ◽  
Drought Tolerant ◽  
Randomized Block Design ◽  
Peel Color

Mango is one of the most cultivated tropical fruits worldwide and one of few drought-tolerant plants. Thus, in this study the effect of a sustained deficit irrigation (SDI) strategy on mango yield and quality was assessed with the aim of reducing irrigation water in mango crop. A randomized block design with four treatments was developed: (i) full irrigation (FI), assuring the crop’s water needs, and three levels of SDI receiving 75%, 50%, and 33% of irrigation water (SDI75, SDI50, and SDI33). Yield, morphology, color, titratable acidity (TA), total soluble solids (TSS), organic acids (OA), sugars, minerals, fiber, antioxidant activity (AA), and total phenolic content (TPC) were analyzed. The yield was reduced in SDI conditions (8%, 11%, and 20% for SDI75, SDI50, and SDI33, respectively), but the irrigation water productivity was higher in all SDI regimes. SDI significantly reduced the mango size, with SDI33 generating the smallest mangoes. Peel color significantly changed after 13 days of ripening, with SDI75 being the least ripe. The TA, AA, and citric acid were higher in SDI75, while the TPC and fiber increased in all SDI levels. Consequently, SDI reduced the mango size but increased the functionality of samples, without a severe detrimental effect on the yield.

scholarly journals Melon fruit yield and quality as a function of doses and times of biostimulant application

2020 ◽  
Vol 9 (7) ◽  
pp. e130973911
Author(s):  
Roberto Cleiton Fernandes de Queiroga ◽  
Zaqueu Lopes da Silva ◽  
Odair Honorato Oliveira de ◽  
Elidayane da Nóbrega Santos ◽  
Higínio Luan Oliveira Silva ◽  
...  
Keyword(s):  
Block Design ◽  
Fruit Production ◽  
Soluble Solids ◽  
Application Time ◽  
Time Of Application ◽  
Yield And Quality ◽  
Randomized Block Design ◽  
Semi Arid Region ◽  
Fruit Mass

The objective of this study was to evaluate the productivity and quality of melon fruits as a function of the dose and time of application of biostimulant in the conditions of the semi-arid region of Paraíba. The experiment was carried out at the Federal University of Campina Grande, campus of Pombal - PB, Brazil, in a randomized block design in a 4 x 5 split plot scheme, with doses of biostimulant (0; 0.5; 1.0; 1, 5 and 2.0 L ha-1) and in the subset of the biostimulant application times (15; 20; 25 and 30 days before harvest - DAC), in four replications. Characteristics related to fruit production and quality were evaluated. There was no interaction between the factors of dose and application time of the biostimulant in any of the evaluated characteristics. Thus, the highest estimated values of number of fruits per plant, fruit mass and total melon production were obtained with the application of doses ranging from 0.9 to 1.5 L ha-1 and at the time of application it varied from 22,5 to 23.6 DAC. The content of soluble solids increased 5.5% when the biostimulant dose of 2.0 L ha-1 was used and 4.4% when the product was applied 15 days before harvest.

scholarly journals Productivity, quality of fruits and architecture of Jalapeño pepper at different planting densities

2019 ◽  
Vol 37 (3) ◽  
pp. 331-337
Author(s):  
Carlos Francisco Ragassi ◽  
Juliana Zucolotto ◽  
Lucas M Gomes ◽  
Cláudia SC Ribeiro ◽  
Nuno Rodrigo Madeira ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Plant Architecture ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Randomized Complete Block Design ◽  
Total Titratable Acidity ◽  
Second Year ◽  
Increase In Productivity

ABSTRACT Mechanizing the harvest of Jalapeño pepper involves changes in the production system. Spacings between plants in rows (10 to 40 cm; 60 cm fixed between rows) were evaluated in relation to plant architecture, productivity and fruit quality of cultivar BRS Sarakura during three years, in a randomized complete block design with five replicates. Productivity (41.9 to 78.8 t ha-1) and plant height (40.1 to 47.3 cm) responded linearly to density; on the other hand, productivity per plant responded negatively (0.48 to 1.04 kg plant-1). The stem first bifurcation height was little influenced. Fruit chemical analyses were carried out in the second year of the experiment; spacing significantly influenced pH (5.36 to 4.84), total titratable acidity (TTA) (0.48 to 0.36%) and total soluble solids (TSS)/TTA ratio (11.5 to 15.6); no influence on TSS (5.65%) was noticed, though. The increase of plant population provided an increase in productivity without affecting fruit quality; the highest height of the first bifurcation achieved may not be enough to enable mechanized harvesting of the cultivar BRS Sarakura.

scholarly journals Apple Orchard Productivity and Fruit Quality under Organic, Conventional, and Integrated Management

HortScience ◽  
2006 ◽  
Vol 41 (1) ◽  
pp. 99-107 ◽  
Author(s):  
Gregory M. Peck ◽  
Preston K. Andrews ◽  
John P. Reganold ◽  
John K. Fellman
Keyword(s):  
Fruit Quality ◽  
Crop Yields ◽  
Block Design ◽  
Leaf Tissue ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Apple Orchard ◽  
Soluble Solids ◽  
Crop Load ◽  
Flesh Firmness

Located on a 20-ha commercial apple (Malus domestica Borkh.) orchard in the Yakima Valley, Washington, a 1.7-ha study area was planted with apple trees in 1994 in a randomized complete block design with four replications of three treatments: organic (ORG), conventional (CON), and integrated (INT). Soil classification, rootstock, cultivar, plant age, and all other conditions except management were the same on all plots. In years 9 (2002) and 10 (2003) of this study, we compared the orchard productivity and fruit quality of `Galaxy Gala' apples. Measurements of crop yield, yield efficiency, crop load, average fruit weight, tree growth, color grades, and weight distributions of marketable fruit, percentages of unmarketable fruit, classifications of unmarketable fruit, as well as leaf, fruit, and soil mineral concentrations, were used to evaluate orchard productivity. Apple fruit quality was assessed at harvest and after refrigerated (0 to 1 °C) storage for three months in regular atmosphere (ambient oxygen levels) and for three and six months in controlled atmosphere (1.5% to 2% oxygen). Fruit internal ethylene concentrations and evolution, fruit respiration, flesh firmness, soluble solids concentration (SSC), titratable acidity (TA), purgeable volatile production, sensory panels, and total antioxidant activity (TAA) were used to evaluate fruit quality. ORG crop yields were two-thirds of the CON and about half of the INT yields in 2002, but about one-third greater than either system in 2003. High ORG yields in 2003 resulted in smaller ORG fruit. Inconsistent ORG yields were probably the result of several factors, including unsatisfactory crop load management, higher pest and weed pressures, lower leaf and fruit tissue nitrogen, and deficient leaf tissue zinc concentrations. Despite production difficulties, ORG apples had 6 to 10 N higher flesh firmness than CON, and 4 to 7 N higher than INT apples, for similar-sized fruit. Consumer panels tended to rate ORG and INT apples to have equal or better overall acceptability, firmness, and texture than CON apples. Neither laboratory measurements nor sensory evaluations detected differences in SSC, TA, or the SSC to TA ratio. Consumers were unable to discern the higher concentrations of flavor volatiles found in CON apples. For a 200 g fruit, ORG apples contained 10% to 15% more TAA than CON apples and 8% to 25% more TAA than INT apples. Across most parameters measured in this study, the CON and INT farm management systems were more similar to each other than either was to the ORG system. The production challenges associated with low-input organic apple farming systems are discussed. Despite limited technologies and products for organic apple production, the ORG apples in our study showed improvements in some fruit quality attributes that could aid their marketability.

scholarly journals Quality aspects of pepino dulce fruits in distinct ripening stages, packaging forms and storage conditions

2020 ◽  
Vol 23 ◽  
Author(s):  
Neide Botrel ◽  
Raphael Augusto de Castro e Melo
Keyword(s):  
Fruit Quality ◽  
Block Design ◽  
Titratable Acidity ◽  
Storage Conditions ◽  
Matter Content ◽  
Soluble Solids ◽  
Small Scale ◽  
Dry Matter Content ◽  
Ripening Stages ◽  
Quality Aspects

Abstract Pepino dulce (Solanum muricatum Aiton) or Pepino has been growing to produce edible, juicy and attractive fruits. The imported fruits and national small scale of Pepino dulce production are currently stored and commercialized under the absence of postharvest handling recommendations. Therefore, this work aimed to evaluate the quality aspects of Pepino dulce fruits in distinct ripening stages, forms of packaging and conditions of storage. The trial was conducted in a 2x2x2 factorial scheme - 2 ripening stages (ripe and immature) x 2 forms of packaging (with and without wrapping in plastic film) x 2 conditions of storage (room: 25 °C ± 2 ºC and 57% ± 5% of relative humidity (RH); cold: under refrigeration 10 °C ± 2 °C and 85% ± 5% of RH) – in a complete randomized block design. Fruit quality attributes, such as vitamin C, chemical and phenolic content, fruit color (mesocarp), firmness, dry matter content, total titratable acidity (TA), total soluble solids and pH, were evaluated. Fruits showed a centesimal composition with low calories and a significant content of potassium (K), phosphorus (P) and magnesium (Mg), which can contribute to the daily supply of these elements. For commercialization purposes, the association of packaging (plastic wrapping film) and refrigerated storage (cold: 10 °C ± 2 °C and 85% ± 5% of RH) to maintain the characteristics of fruit quality after a 15 days period is more important than its individual use.

Sign in / Sign up

Export Citation Format

Share Document