scholarly journals Elaboration of Blends of Pitaya Pulps With Acerola

2021 ◽  
Vol 13 (3) ◽  
pp. 53
Author(s):  
Maria S. de Moraes ◽  
Rossana Maria Feitosa de Figueirêdo ◽  
Alexandre J. de M. Queiroz ◽  
Luís P. F. R da Silva ◽  
Mailson G. Gonçalves ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Water Content ◽  
Water Activity ◽  
Economic Value ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Colorimetric Analysis ◽  
Physical Chemical ◽  
Total Titratable Acidity ◽  
Hue Angle

Pitaya and acerola are fruits rich in nutrients and can be used in blends formulation in order to improve the sensory characteristics of both pulps in isolation and complement each other in terms of nutritional aspects. Thus, the aim of this research was to develop different blends of pitaya pulp with acerola and choose the best formulation based on physical-chemical and colorimetric characteristics. Three blends formulations were prepared: F1-90% pitaya and 10% acerola; F2-70% pitaya and 30% acerola; and F3-50% pitaya and 50% acerola. The formulations were evaluated for physical-chemical parameters of water activity, water content, ash, total soluble solids (SST), pH, total titratable acidity (ATT), SST/ATT ratio, ascorbic acid, proteins, lipids, sugars totals, reducers and non-reducers and colorimetric analysis. The obtained data were subjected to variance analysis (ANOVA) and to comparison between means by the Tukey test at 5% probability. The formulation F1 stood out when compared to the others. The parameters pH, soluble solids, ratio SS/ATT, ash, water content, water activity, proteins, sugars, luminosity and hue angle were the ones that gave the formulation F1 the best results. However, it is noteworthy that the formulation F3 presented a greater amount of ascorbic acid and higher values of a, b and chroma in the colorimetric analysis. The use of these fruits allows to obtain an innovative product with excellent nutritional and functional characteristics. The blend is a viable alternative for the use of perishable and seasonal fruits, adding greater economic value to the very promising product to the market.

scholarly journals Stability of cactus-pear powder during storage

2016 ◽  
Vol 20 (2) ◽  
pp. 169-173
Author(s):  
Plúvia O. Galdino ◽  
Rossana M. F. de Figueirêdo ◽  
Alexandre J. de M. Queiroz ◽  
Pablícia O. Galdino ◽  
Tâmila K. da S. Fernandes
Keyword(s):  
Water Content ◽  
Water Activity ◽  
Reducing Sugars ◽  
Titratable Acidity ◽  
High Water ◽  
Soluble Solids ◽  
High Water Content ◽  
Cactus Pear ◽  
Total Titratable Acidity ◽  
The Stability

ABSTRACT The stability of cactus-pear powder, obtained by the process of spray drying for 40 days, was evaluated under controlled conditions of relative air humidity (83%) and temperature (25 and 40 °C). The whole pulp was characterized with regard to its physico-chemical parameters: pH, total titratable acidity, soluble solids, water content, total solids, ashes, reducing sugars, total sugars, non-reducing sugars, luminosity, redness, yellowness and water activity. The stored samples in powder were evaluated every 10 days for water content, water activity, total titratable acidity and color (luminosity, redness and yellowness). The whole pulp was slightly acidic and perishable, due to the high water content. During storage, the packages did not prevent water absorption, thus increasing water content and, consequently, water activity. Yellowness oscillated along the storage time, but the predominance of the yellow color was not affected.

scholarly journals Estudo experimental do limão Tahiti (Citrus latifólia Tanaka): composição físico-química e de minerais da polpa in natura e do resíduo albedo

2017 ◽  
Vol 1 (37) ◽  
pp. 64
Author(s):  
Kátia Davi Brito ◽  
Josenildo Isidro Santos Filho ◽  
Henrique Bruno Lima ◽  
Emmanuel Paixao Neto ◽  
Flávia Cristina dos Santos Lima
Keyword(s):  
Water Activity ◽  
Reducing Sugars ◽  
Economic Value ◽  
Mesh Size ◽  
Titratable Acidity ◽  
Quality Parameters ◽  
Soluble Solids ◽  
Essential Information ◽  
Physical Chemical ◽  
Forced Air

<p>The present work aimed to evaluate the physical-chemical and mineral parameters of the in natura pulp and the albedo residue of the Tahiti lemon. The pulp was extracted on a stainless steel horizontal removing device and refined in a sieve with a mesh size less than 1.0 mm. The albedo residue was separated and manually dried in a kiln with forced air circulation at a temperature of 55 ± 2°C until constant mass. The physico-chemical analyzes for the pulp in natura were: total solids (TS), soluble solids (°Brix), titratable acidity (TA), pH, vitamin C, total and reducing sugars, moisture, ashes and water activity. For the dry albedo, moisture, pH, ashes, water activity, protein, reducing sugars (RS) and pectin were evaluated. The mineral constituents consisted on the evaluation of the centesimal composition of calcium (Ca), potassium (K), phosphorus (P), manganese (Mn), iron (Fe), zinc (Zn) and copper (Cu) for the in natura pulp and dry albedo residue of Tahiti lemon. Regarding the physical-chemical and mineral quality parameters, results were satisfactory. Therefore, the study of Tahiti lemon provided essential information on the availability of nutrients, so as to provide the consumer with new products derived from the Tahiti lemon and also to add economic value to the fruit.</p>

scholarly journals Production and characterization of lyophilized powder of yellow mombin (Spondias mombin L.) and umbu (Spondias tuberosa)

2021 ◽  
pp. 669-675
Author(s):  
Polyana Barbosa da Silva ◽  
Francisco de Assis Cardoso Almeida ◽  
Josivanda Palmeira Gomes ◽  
Semirames do Nascimento Silva ◽  
Antonio Jackson Ribeiro Barroso ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Water Content ◽  
Water Activity ◽  
Chemical Characterization ◽  
Titratable Acidity ◽  
Added Value ◽  
Economic Potential ◽  
Physical Chemical ◽  
Nutritional Characteristics

Yellow mombin and umbu are appreciable fruits with growing demand in the Northeast region of Brazil, used mainly in the form of pulps, juices, and ice cream, having great economic potential. Lyophilized products have high added value for maintaining a good part of their nutritional characteristics. The objective was to produce and characterize yellow mombin and umbu powders by lyophilization, using different concentrations of maltodextrin. The pulps were prepared in five formulations considering the addition of maltodextrin, with 0, 10, 20, 25 and 30% for yellow mombin and 0, 10, 15, 20, and 30% for umbu. Then they were frozen and lyophilized in a model L101 lyophilizer at a pressure at a final pressure of 170 mmHg and a temperature of (-50 ºC +/- 3 ºC). The physical-chemical characterization of the whole pulps and of the yellow mombin and umbu powders was carried out and were determined: water content (%), aw (water activity), protein (%), lipids (%), ash (%), ascorbic acid (mg of ascorbic acid.100g-1), SS (ºBrix), pH, titratable acidity (%), SS/AT ratio, color (L*, a * and b*), solubility (%) and hygroscopicity (%). Only in the formulation with 30% maltodextrin the water content of the powders was less than 5%, as recommended by the legislation for lyophilized fruits. The lower water activity (aw) was also obtained in this formulation, in addition to increased solubility and reduced hygroscopicity, which are factors that favor the quality and conservation of powders, which are more suitable for the production of food products

scholarly journals Physico-chemical properties of different formulations of pequi pulp with milk

2020 ◽  
Vol 11 ◽  
pp. e3297
Author(s):  
Maria Suiane Moraes ◽  
Janaina Almeida Dantas Esmero ◽  
Rossana Maria Feitosa De Figueirêdo ◽  
Alexandre José de Melo Queiroz
Keyword(s):  
Water Activity ◽  
Chemical Properties ◽  
Chemical Characterization ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Total Soluble Solids ◽  
Physical Chemical ◽  
Physico Chemical ◽  
Whole Milk ◽  
Total Titratable Acidity

The objective of this work was to perform the physical-chemical characterization of different formulations of the pequi pulp with the addition of different concentrations of whole milk, in order to identify promising products for commercial use. Three formulations of pequi pulp with whole milk were prepared: PL1- 90% pequi pulp and 10% milk, PL2 - 70% pequi pulp and 30% milk, PL3 - 50% pequi pulp and 50% milk. The formulations were evaluated for physical and physical-chemical parameters of color, water activity, water content, ash, total soluble solids (SST), pH, total titratable acidity (ATT), SST/ATT ratio, ascorbic acid, proteins, lipids, total, reducing and non-reducing sugars. The data obtained were subjected to analysis of variance (ANOVA) and comparison between means by the Tukey test at 5% probability. Among the three tested formulations, the best results were obtained for PL3, where it presented lower total titratable acidity, water activity, red intensity, yellow intensity and chromaticity, however, higher content of total soluble solids, ratio SST/ATT, ash, lipids, sugars (total, dimmer and non-dimmer), luminosity and tint angle. The inclusion of milk in the pequi pulp changed the physical and physical-chemical characteristics of the pulp, and it can be an alternative to add nutritional value to the fruit and consequently a promising product for the market.

scholarly journals Parâmetros físico-químicos de polpas de fruta produzidas na cidade de Petrolina – PE

2015 ◽  
Vol 10 (4) ◽  
pp. 01 ◽  
Author(s):  
A. C. Honorato ◽  
C. B. R. Dias ◽  
E. B. Souza ◽  
I. R. B. Carvalho ◽  
K. S. M. Sousa
Keyword(s):  
Ascorbic Acid ◽  
Physicochemical Parameters ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Chemical Characteristics ◽  
Fruit Pulp ◽  
Total Titratable Acidity ◽  
Physical And Chemical ◽  
The City

<p>Este trabalho teve como objetivo avaliar os parâmetros físico-químicos de polpas de fruta produzidas e comercializadas na cidade de Petrolina-PE, tendo como referência a Instrução Normativa nº 1, de 7 jan. 2000, do Ministério da Agricultura que define as características físicas e químicas estabelecendo limites mínimos e máximos específicos para cada polpa de fruta. Foram avaliadas duas marcas (1 e 2) de polpas de abacaxi, cacau, caju, graviola, maracujá e umbu, analisadas quanto aos parâmetros de pH, sólidos solúveis totais (SST), acidez total titulável (ATT), ácido ascórbico, relação SST/ATT e sólidos totais. Os resultados permitem inferir que a marca 2 apresentou qualidade superior na maioria dos parâmetros avaliados quando comparado com a marca 1. Entretanto para alguns sabores de polpa as duas marcas não atenderam os valores padrões. Entre as polpas o único sabor que apresentou os padrões exigidos foi a polpa de caju em ambas as marcas, e a que apresentou resultado de pior qualidade diante dos padrões foi a polpa de maracujá principalmente da marca 1. Dessa forma constata-se que há grandes variações entre as marcas, e entre alguns parâmetros, o que compromete a qualidade das polpas, prejudicando assim o consumidor.</p><p align="center"><strong><em>Physicochemical parameters of fruit pulps produced in Petrolina – PE</em></strong></p><p><strong>Abstract</strong><strong>: </strong>This study aimed to evaluate the physicochemical parameters of fruit pulps produced and marketed in the city of Petrolina-PE, with reference to the Instruction Nº 1 of 7 January 2000 of the Ministry of Agriculture, which defines the physical and chemical characteristics setting minimum and maximum limits specific to each fruit pulp. We evaluated two brands (1 and 2) of pineapple, cocoa, cashew, soursop, passion and umbu fruit pulp, analyzed for pH, total soluble solids (TSS), total titratable acidity (TTA), ascorbic acid, TSS / TTA and total solids parameters. Results show that the brand 2 showed superior in most evaluated parameters when compared to the brand 1. However, for some pulp flavors of both brands did not reached the standards values. Among the pulps, the only flavor that presented the required standards was the cashew pulp in both brands, and presented the results of lower quality on the standards was the passion fruit pulp mainly brand 1. Thus, it appears that there are great variations between brands and between some parameters, which compromises the quality of the pulp, thus impairing the consumer.</p>

scholarly journals Production and characterization of mixed pineapple and hibiscus jam

2019 ◽  
Vol 13 ◽  
pp. 155
Author(s):  
Eugênia Telis De Vilela Silva ◽  
Henrique Valentim Moura ◽  
Rossana Maria Feitosa de Figueiredo ◽  
Alexandre Jose De Melo Queiroz ◽  
Inácia Dos Santos Moreira
Keyword(s):  
Ascorbic Acid ◽  
Water Content ◽  
Ascorbic Acid Content ◽  
Titratable Acidity ◽  
High Water ◽  
Soluble Solids ◽  
High Water Content ◽  
Total Sugars ◽  
Total Soluble Solids ◽  
Total Anthocyanins

Pineapple is a food rich in vitamins, antioxidants and bromelain, but because it has high water content it becomes a highly perishable fruit. Hibiscus is a plant with flowers rich in phytochemicals that can be used as an ingredient to add value to processed products. The objective of this work was to prepare mixed jams using pineapple with hibiscus extract at different concentrations and to characterize the physicochemical properties of the jams produced. Experimental design was completely randomized with four replicates. The treatments consisted of three concentration levels of hibiscus extract (5, 10 and 15%) in pineapple jelly (50:50). Analyzed physical-chemical characteristics were: water content, water activity, ash, lipids, total sugars, reducing and non-reducing sugars, vitamin C, total titratable acidity, pH and total soluble solids. It was found that increasing concentrations of hibiscus in the formulations significantly influenced resulting jam composition. Increasing hibiscus concentration reduced the total sugars content and increased ascorbic acid content, acidity, total soluble solids and ash, as well as total anthocyanins and flavonoids contents. Among the jams produced, the formulation with 15% hibiscus was distinguished by its high content of ascorbic acid, flavonoids and anthocyanins. The addition of hibiscus to pineapple jelly improves the nutritional and functional value of the resulting jams, so it can be considered a high potential ingredient for this type of product.

scholarly journals Yield, physicochemical quality, and antioxidant capacity of “beef” and wild tomato fruits (Solanum lycopersicum L.) as a function of the electrical conductivity of the nutrient solution

2017 ◽  
Vol 35 (3) ◽  
pp. 330-339
Author(s):  
María Teresa Martínez-Damían ◽  
Oscar Cruz-Álvarez ◽  
Juan Enrique Rodríguez-Pérez ◽  
María Teresa Colinas-León ◽  
Miguel Angel Góngora-Canto
Keyword(s):  
Electrical Conductivity ◽  
Antioxidant Capacity ◽  
Nutrient Solution ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Physicochemical Quality ◽  
Solanum Lycopersicum L ◽  
Total Titratable Acidity ◽  
Hue Angle

The objective of this study was to evaluate the response of three levels of electrical conductivity (2.0, 2.5 and 3.0 dS m-1) of Steiner’s nutrient solution on the yield, physicochemical quality, and antioxidant capacity of fruits from seven tomato genotypes and wild types of tomato (kidney selections). The yield, number of fruits per cluster (NFPC), average fresh fruit weight (AFWF), color, firmness, total soluble solids (TSS), total titratable acidity (TTA), vitamin C (VC), total phenols (TP), lycopene (LY) and antioxidant capacity (AC). The use of 2.5 and 3.0 dS m-1 increased the hue angle (49.05°) and TTA (0.35 and 0.36% citric acid). Among genotypes, L-51H and L-76H showed better performance (16.80 and 16.91 kg m-2, respectively), where L-28 stood out for its values of TSS, TTA, VC, TP and AC. Regarding the wild genotypes, the EC modification did not increase the yield; however, the use of 3.0 dS m-1 allowed the best results among the wild selections were SS3 (yield, AFWF and LY) and SS5 (NFPC, VC, TP and AC). The modification of the EC did not affect the yield, however, if it affected the physicochemical quality and antioxidant capacity of the analyzed materials.

Use of sodium metabisulfite and ascorbic acid as anti-browning agents in processed potatoes

2019 ◽  
Vol 122 (2) ◽  
pp. 380-389 ◽  
Author(s):  
Revenli Fernanda do Nascimento ◽  
Maria Helene Giovanetti Canteri
Keyword(s):  
Ascorbic Acid ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Sodium Metabisulfite ◽  
Browning Index ◽  
Content Type ◽  
Chemical Treatments ◽  
Chemical Agents ◽  
Total Titratable Acidity ◽  
Processed Potatoes

Purpose The purpose of this paper is to evaluate the use of sodium metabisulfite (SMB) and ascorbic acid (AA) either alone or in combination as anti-browning agents in industrially processed potatoes. Design/methodology/approach The experiment was carried out in the production line of an agricultural industry located in the state of Paraná, Brazil, testing the following chemical treatments in the immersion process of the potatoes: T1 (control, without additives), T2 (0.5 percent AA), T3 (0.5 percent SMB), T4 (0.5 percent SMB + 0.5 percent AA) and T5 (0.25 percent SMB + 0.25 percent AA). The statistical significance of the difference between chemical treatments (T1, T2, T3, T4 and T5) and storage periods (1, 5, 10 and 15 days) was evaluated by one-way analysis of variance (ANOVA). Additionally, multifactorial ANOVA was carried out in a 22 factorial experimental design with 3 central points to estimate the influence of independent variables on the results. The analyses performed on the samples of the different treatments were total soluble solids content, pH, total titratable acidity, instrumental color and browning index. Findings The tested antioxidants did not affect the content of total soluble solids and total titratable acidity but significantly influenced the pH, color and browning index. The treatment T3, containing only SMB (0.5 percent m/v), and the treatment T5, a combination of SMB (0.25 percent m/v) and AA (0.25 percent m/v), were the most effective in the controlling the browning reaction. In these treatments, the formation of brown color in potatoes after cooked was significantly reduced (p<0.05) using relatively lower concentration of antioxidants. Originality/value The novelty of the research is focused on reducing the use of chemical agents to control the browning of the processed potatoes (peeled, steamed, sterilized and vacuum packed) ready for consumption and widely marketed. During processing of this commercial potato, the tissue damage caused by mechanical processes, as well as the heat treatment employed during cooking, induces the development of enzymatic and non-enzymatic browning reactions. Thus, it is necessary to investigate the influence of industrially employed chemical agents in order to maintain the quality of this product, with stable color and the lowest possible concentration of additives. The reduction of chemical additives offers viable solutions to many of the problems the Sustainable Development Goals are meant to tackle, as they ensure healthy lives, availability and sustainable management of water and promote inclusive and sustainable industrialization.

scholarly journals Postharvest mechanical damage affects fruit quality of 'Montenegrina' and 'Rainha' tangerines

2009 ◽  
Vol 44 (12) ◽  
pp. 1636-1640 ◽  
Author(s):  
Cândida Raquel Scherrer Montero ◽  
Lígia Loss Schwarz ◽  
Liege Cunha dos Santos ◽  
Cristiane Salete Andreazza ◽  
Carolina Pereira Kechinski ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Mechanical Damage ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Internal Quality ◽  
Color Changes ◽  
Randomized Design ◽  
Total Titratable Acidity ◽  
Completely Randomized Design

The objective of this work was to evaluate the visual and chemical quality of tangerines after mechanical damage by impacts. The tangerine cultivars Montenegrina and Rainha were submitted to different degrees of impact and evaluated for decay and oleocellosis, loss of fresh weight, total soluble solids, total titratable acidity and ascorbic acid degradation, as well as for epicarp color changes. Experiments with three replicates and experimental units of six fruit for each cultivar were done in a completely randomized design. Impact produced qualitative internal and minor external changes on tangerines. The main modifications produced by impact on the fruit were losses of citric acid and soluble solids, which increased the solid:acid ratio, and losses of ascorbic acid. 'Montenegrina' tangerines are more susceptible to internal quality damage than 'Rainha'.

scholarly journals Preparation and Evaluation of Pear and Grapes Blended Leather

2021 ◽  
Vol 64 (2) ◽  
pp. 182-191
Author(s):  
Ishtiaq Ahmad ◽  
Aysha Riaz ◽  
Arsalan Khan ◽  
Syed Sohail Shah ◽  
Falak Naz Shah ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Water Activity ◽  
Acid Content ◽  
Ascorbic Acid Content ◽  
Titratable Acidity ◽  
Reducing Sugar ◽  
Soluble Solids ◽  
Organoleptic Evaluation ◽  
Overall Acceptability ◽  
Randomized Design

Pear pulp and grapes juice were used in different ratios (100:0, 90:10, 80:20, 70:30, 60:40, 50:50) for the preparation of leather. The treatments were prepared with different concentration of pulp and constant level of sucrose and preservatives. The experiment was laid out in a complete randomized design (CRD). The effects of storage and treatments were studied for three months of storage with an interval of 15 days. Various parameters such as moisture, percent acidity, total soluble solids, water activity, ascorbic acid content, reducing sugar, non-reducing sugar and sensory attributes i.e. colour, taste, texture and overall acceptability were studied. Significant differences were observed in all the studied parameters. A decrease was recorded in moisture (16.02 to 13.76%), ascorbic acid content (13.21 to 6.64 mg/100g), non-reducing sugar (67.02 to 64.76%) and water activity (0.50 to 0.45), while an increase was recorded in titratable acidity (0.88 to 1.01%), TSS (76.68 to 79.05 °brix) and reducing sugar (11.43 to 11.85%). Base on organoleptic evaluation T3 was found most acceptable during storage. The combination of 70% pear pulp and 30% grapes juice for leather preparation proved to be the best combination in terms of extending the shelf life and improving the quality of pear and grapes blended leather during storage.    

Sign in / Sign up

Export Citation Format

Share Document