scholarly journals Graphene-Based Nanophotonic Devices

2020 ◽  
Author(s):  
Ankur Pandya ◽  
Vishal Sorathiya ◽  
Sunil Lavadiya
Keyword(s):  
Human Life ◽  
Low Cost ◽  
Signal Transmission ◽  
Photonic Devices ◽  
Laser Generation ◽  
Display Devices ◽  
Emission Signal ◽  
Nanophotonic Devices ◽  
Synthesis Properties ◽  
Energy Harvesting Devices

Graphene is an ideal 2D material that breaks the fundamental properties of size and speed limits by photonics and electronics, respectively. Graphene is also an ideal material for bridging electronic and photonic devices. Graphene offers several functions of modulation, emission, signal transmission, and detection of wideband and short band infrared frequency spectrum. Graphene has improved human life in multiple ways of low-cost display devices and touchscreen structures, energy harvesting devices (solar cells), optical communication components (modulator, polarizer, detector, laser generation). There is numerous literature is available on graphene synthesis, properties, devices, and applications. However, the main interest among the scientist, researchers, and students to start with the numerical and computational process for the graphene-based nanophotonic devices. This chapter also includes the examples of graphene applications in optoelectronics devices, P-N junction diodes, photodiode structure which are fundamental devices for the solar cell and the optical modulation.

scholarly journals Organotrialkoxysilane-Functionalized Prussian Blue Nanoparticles-Mediated Fluorescence Sensing of Arsenic(III)

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1145
Author(s):  
Prem. C. Pandey ◽  
Shubhangi Shukla ◽  
Roger J. Narayan
Keyword(s):  
Prussian Blue ◽  
Chemical Reduction ◽  
Low Cost ◽  
Three Dimensional ◽  
Heterogeneous Systems ◽  
Lattice Points ◽  
Radiative Energy ◽  
Fluorescence Sensing ◽  
Emission Signal ◽  
Prussian Blue Nanoparticles

Prussian blue nanoparticles (PBN) exhibit selective fluorescence quenching behavior with heavy metal ions; in addition, they possess characteristic oxidant properties both for liquid–liquid and liquid–solid interface catalysis. Here, we propose to study the detection and efficient removal of toxic arsenic(III) species by materializing these dual functions of PBN. A sophisticated PBN-sensitized fluorometric switching system for dosage-dependent detection of As3+ along with PBN-integrated SiO2 platforms as a column adsorbent for biphasic oxidation and elimination of As3+ have been developed. Colloidal PBN were obtained by a facile two-step process involving chemical reduction in the presence of 2-(3,4-epoxycyclohexyl)ethyl trimethoxysilane (EETMSi) and cyclohexanone as reducing agents, while heterogeneous systems were formulated via EETMSi, which triggered in situ growth of PBN inside the three-dimensional framework of silica gel and silica nanoparticles (SiO2). PBN-induced quenching of the emission signal was recorded with an As3+ concentration (0.05–1.6 ppm)-dependent fluorometric titration system, owing to the potential excitation window of PBN (at 480–500 nm), which ultimately restricts the radiative energy transfer. The detection limit for this arrangement is estimated around 0.025 ppm. Furthermore, the mesoporous and macroporous PBN-integrated SiO2 arrangements might act as stationary phase in chromatographic studies to significantly remove As3+. Besides physisorption, significant electron exchange between Fe3+/Fe2+ lattice points and As3+ ions enable complete conversion to less toxic As5+ ions with the repeated influx of mobile phase. PBN-integrated SiO2 matrices were successfully restored after segregating the target ions. This study indicates that PBN and PBN-integrated SiO2 platforms may enable straightforward and low-cost removal of arsenic from contaminated water.

scholarly journals Phase Change Metasurfaces by Continuous or Quasi-Continuous Atoms for Active Optoelectronic Integration

Materials ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1272
Author(s):  
Zhihua Fan ◽  
Qinling Deng ◽  
Xiaoyu Ma ◽  
Shaolin Zhou
Keyword(s):  
Phase Change ◽  
Phase Change Materials ◽  
Complementary Metal Oxide Semiconductor ◽  
Photonic Devices ◽  
Oxide Semiconductor ◽  
Cmos Process ◽  
Nanophotonic Devices ◽  
Optoelectronic Integration ◽  
Hybrid Devices ◽  
Micro Electromechanical System

In recent decades, metasurfaces have emerged as an exotic and appealing group of nanophotonic devices for versatile wave regulation with deep subwavelength thickness facilitating compact integration. However, the ability to dynamically control the wave–matter interaction with external stimulus is highly desirable especially in such scenarios as integrated photonics and optoelectronics, since their performance in amplitude and phase control settle down once manufactured. Currently, available routes to construct active photonic devices include micro-electromechanical system (MEMS), semiconductors, liquid crystal, and phase change materials (PCMs)-integrated hybrid devices, etc. For the sake of compact integration and good compatibility with the mainstream complementary metal oxide semiconductor (CMOS) process for nanofabrication and device integration, the PCMs-based scheme stands out as a viable and promising candidate. Therefore, this review focuses on recent progresses on phase change metasurfaces with dynamic wave control (amplitude and phase or wavefront), and especially outlines those with continuous or quasi-continuous atoms in favor of optoelectronic integration.

scholarly journals Methods of Respiratory Virus Detection: Advances towards Point-of-Care for Early Intervention

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 697
Author(s):  
Siming Lu ◽  
Sha Lin ◽  
Hongrui Zhang ◽  
Liguo Liang ◽  
Shien Shen
Keyword(s):  
Viral Load ◽  
Respiratory Virus ◽  
Viral Infections ◽  
Point Of Care ◽  
Human Life ◽  
Low Cost ◽  
Virus Detection ◽  
Frequent Monitoring ◽  
User Friendly ◽  
New Strategies

Respiratory viral infections threaten human life and inflict an enormous healthcare burden worldwide. Frequent monitoring of viral antibodies and viral load can effectively help to control the spread of the virus and make timely interventions. However, current methods for detecting viral load require dedicated personnel and are time-consuming. Additionally, COVID-19 detection is generally relied on an automated PCR analyzer, which is highly instrument-dependent and expensive. As such, emerging technologies in the development of respiratory viral load assays for point-of-care (POC) testing are urgently needed for viral screening. Recent advances in loop-mediated isothermal amplification (LAMP), biosensors, nanotechnology-based paper strips and microfluidics offer new strategies to develop a rapid, low-cost, and user-friendly respiratory viral monitoring platform. In this review, we summarized the traditional methods in respiratory virus detection and present the state-of-art technologies in the monitoring of respiratory virus at POC.

scholarly journals In-Plane Monolithic Integration of Scaled III-V Photonic Devices

2021 ◽  
Vol 11 (4) ◽  
pp. 1887
Author(s):  
Markus Scherrer ◽  
Noelia Vico Triviño ◽  
Svenja Mauthe ◽  
Preksha Tiwari ◽  
Heinz Schmid ◽  
...  
Keyword(s):  
Integrated Circuits ◽  
High Speed ◽  
Low Cost ◽  
Photonic Devices ◽  
Monolithic Integration ◽  
Light Emitters ◽  
Fully Integrated ◽  
Large Lattice ◽  
Hybrid Iii ◽  
Gain Material

It is a long-standing goal to leverage silicon photonics through the combination of a low-cost advanced silicon platform with III-V-based active gain material. The monolithic integration of the III-V material is ultimately desirable for scalable integrated circuits but inherently challenging due to the large lattice and thermal mismatch with Si. Here, we briefly review different approaches to monolithic III-V integration while focusing on discussing the results achieved using an integration technique called template-assisted selective epitaxy (TASE), which provides some unique opportunities compared to existing state-of-the-art approaches. This method relies on the selective replacement of a prepatterned silicon structure with III-V material and thereby achieves the self-aligned in-plane monolithic integration of III-Vs on silicon. In our group, we have realized several embodiments of TASE for different applications; here, we will focus specifically on in-plane integrated photonic structures due to the ease with which these can be coupled to SOI waveguides and the inherent in-plane doping orientation, which is beneficial to waveguide-coupled architectures. In particular, we will discuss light emitters based on hybrid III-V/Si photonic crystal structures and high-speed InGaAs detectors, both covering the entire telecom wavelength spectral range. This opens a new path towards the realization of fully integrated, densely packed, and scalable photonic integrated circuits.

scholarly journals Real-time experimental demonstration of
low-cost VCSEL intensity-modulated 1125Gb/s optical OFDM signal transmission over 25km PON systems

2011 ◽  
Vol 19 (4) ◽  
pp. 2979 ◽  
Author(s):  
E. Hugues-Salas ◽  
R.P. Giddings ◽  
X.Q. Jin ◽  
J. L. Wei ◽  
X. Zheng ◽  
...  
Keyword(s):  
Real Time ◽  
Low Cost ◽  
Signal Transmission ◽  
Experimental Demonstration ◽  
Intensity Modulated ◽  
Ofdm Signal ◽  
Optical Ofdm

scholarly journals Health Monitoring and Tracking System for Soldiers Using Internet of Things (IoT)

2021 ◽  
pp. 58-65
Author(s):  
V. Annapoorani ◽  
P. Rathna ◽  
C. Priyanka ◽  
B. Maheshwari ◽  
E. Leela
Keyword(s):  
Health Status ◽  
Internet Of Things ◽  
Health Monitoring ◽  
Tracking System ◽  
Human Life ◽  
Low Cost ◽  
Control Room ◽  
Current Location ◽  
Internet Of Thing

The paper reports an Internet of Thing (IoT) based health monitoring and tracking system for soldiers. The proposed system can be mounted on the soldier’s body to track their health status and current location using GPS. These information will be transmitted to the control room through IoT. The proposed system comprise of tiny wearable physiological equipment’s, sensors, transmission modules. Hence, with the use of the proposed equipment, it is possible to implement a low cost mechanism to protect the valuable human life on the battlefield

Detection of aldehydes by gold nanoparticles colorimetric array based on Tollens’ reagent

2021 ◽  
Author(s):  
Qinghai Zhang ◽  
Jiawei Li ◽  
You Wang ◽  
Yi Ma ◽  
Miao He ◽  
...  
Keyword(s):  
Gold Nanoparticles ◽  
Human Life ◽  
Low Cost

Aldehydes are the most common pollutants and the most possible human carcinogens in human life. Herein, we reported an easy-to-operate and low-cost method for discrimination of diverse aldehydes. One new...

Research on a simulating device for electric transmission characteristics of long-distance subsea umbilical cable

2020 ◽  
pp. 147509022092450
Author(s):  
Yufang Li ◽  
Honglin Zhao ◽  
Yongbiao Xu ◽  
Deguo Wang
Keyword(s):  
Voltage Drop ◽  
Low Cost ◽  
Signal Transmission ◽  
Transmission Characteristics ◽  
Electrical Transmission ◽  
Long Distance ◽  
The Real ◽  
Transmission Attenuation ◽  
Umbilical Cable ◽  
Attenuation Characteristics

Subsea umbilical cable is an important link to transmit power and signals in subsea production system, often lasts for tens of kilometers in deep-sea projects. It is expensive, bulky, and inconvenient to transport. In this article, a compact, low-cost umbilical cable electrical simulator is proposed, which can be equivalent to the real umbilical cable in power transmission characteristics and can adjust parameters in a certain range. By studying the electrical transmission characteristics of long umbilical cable, the calculation method of electrical transmission characteristics is determined. A simulation device for simulating the transmission characteristics of umbilical cable is designed, which can be used to simulate the umbilical cable diameter of 10 and 16 mm2. The voltage drop characteristics, signal transmission attenuation characteristics, and power carrier characteristics of the umbilical cable electrical simulation device are simulated and experimentally analyzed. The experimental results show that the voltage drop characteristics, signal transmission attenuation characteristics, and power carrier characteristics of the umbilical cable electrical simulator are in good agreement with the real umbilical cable. The simulation device of umbilical cable can well simulate the power and signal transmission characteristics of real umbilical cable.

Printed photonic elements: nanoimprinting and beyond

2016 ◽  
Vol 4 (23) ◽  
pp. 5133-5153 ◽  
Author(s):  
Cheng Zhang ◽  
Harish Subbaraman ◽  
Qiaochu Li ◽  
Zeyu Pan ◽  
Jong G. Ok ◽  
...  
Keyword(s):  
Large Scale ◽  
Low Cost ◽  
Photonic Devices

In order to manufacture large-scale photonic devices of various dimensions at a low cost, a number of printing-based patterning techniques have been developed.

Sign in / Sign up

Export Citation Format

Share Document