scholarly journals Recent Advances in Pre-Treatment of Plastic Packaging Waste

2021 ◽  
Author(s):  
Rita Kol ◽  
Martijn Roosen ◽  
Sibel Ügdüler ◽  
Kevin M. Van Geem ◽  
Kim Ragaert ◽  
...  
Keyword(s):  
Extraction Methods ◽  
Multilayer Films ◽  
Waste Recycling ◽  
Chemical Recycling ◽  
Plastic Packaging ◽  
Packaging Waste ◽  
Treatment Techniques ◽  
Treatment Processes ◽  
Chemical Washing ◽  
Pre Treatment

There is an urgent need to close the loop of plastic waste. One of the main challenges towards plastic packaging waste recycling is the presence of a variety of contaminants. These contaminants include organic residues, additives, labels, inks and also other plastic types that can be present in the waste stream due to missorting or in multimaterial structures (e.g. multilayer films in packaging). In this context, pre-treatment processes are a promising route to tackle the difficulties that are encountered in mechanical and chemical recycling due to these contaminants. This chapter gives better insight on the already existing pre-treatment techniques and on the advances that are being developed and/or optimized in order to achieve closed-loop recycling. Some of these advanced pre-treatments include chemical washing to remove inks (deinking), extraction methods to remove undesired plastic additives and dissolution-based pre-treatments, such as delamination and dissolution-precipitation techniques.

Prospects and problems of sludge pre-treatment processes

2001 ◽  
Vol 44 (10) ◽  
pp. 121-128 ◽  
Author(s):  
J.A. Müller
Keyword(s):  
Wastewater Treatment ◽  
Phase Changes ◽  
Ozone Treatment ◽  
Thermal Methods ◽  
Sludge Treatment ◽  
Freeze Thaw ◽  
Positive Effects ◽  
Treatment Processes ◽  
Stage Of Development ◽  
Pre Treatment

Pre-treatment processes have been developed in order to improve subsequent sludge treatment and disposal. Disintegration of sludge solids in the aqueous phase changes the sludge structure and solubilizes organic matter. This paper provides an overview of the applications of wet disintegration in wastewater and sludge treatment. Applied disintegration techniques such as mechanical, thermal, chemical and biological methods are briefly described. The methods are compared regarding energy consumption, operational reliability and stage of development for application on wastewater treatment plants. Mechanical and thermal methods appear to be most suitable at this stage. The effects of pre-treatment on subsequent sludge treatment processes and the wastewater treatment are described. The performance of various methods is assessed. For the improvement of stabilization, mechanical and ozone treatment as well as thermal treatment perform best. Dewatering can be enhanced by thermal and freeze/thaw treatment. All methods show positive effects in the reduction of the number of pathogens. Pre-treatment leads to secondary effects like the generation of recalcitrant compounds and odor, which is mainly a problem of thermal and ozone treatment. The evaluation of capital and operational costs is difficult, because of the lack of full-scale experience. Especially thermal, freeze/thaw and biological treatments can be realized at low costs if the conditions are appropriate. Nevertheless, the economic efficiency has to be investigated critically for each individual application.

Sample pre-treatment techniques for use with ICP-MS hyphenated techniques for elemental speciation in biological samples

2017 ◽  
Vol 32 (1) ◽  
pp. 58-77 ◽  
Author(s):  
Han Wang ◽  
Xiaolan Liu ◽  
Kai Nan ◽  
Beibei Chen ◽  
Man He ◽  
...  
Keyword(s):  
Biological Samples ◽  
State Of The Art ◽  
Sample Pretreatment ◽  
The State ◽  
Elemental Speciation ◽  
Hyphenated Techniques ◽  
Treatment Techniques ◽  
Icp Ms ◽  
Pre Treatment

This review will focus specifically on the state of the art of novel sample pretreatment methods which have been combined with ICP-MS based hyphenated techniques for elemental speciation in biological samples.

Investigation and assessment of sludge pre-treatment processes

2004 ◽  
Vol 49 (10) ◽  
pp. 97-104 ◽  
Author(s):  
J.A. Müller ◽  
A. Winter ◽  
G. Strünkmann
Keyword(s):  
Fine Particles ◽  
Degradation Process ◽  
Solid Content ◽  
Ozone Treatment ◽  
Treatment Processes ◽  
Sludge Properties ◽  
Pre Treatment ◽  
The Cost ◽  
Degree Of Degradation ◽  
Cell Disintegration

The pre-treatment of sludges by disintegration will result in a number of changes in sludge properties. Floc destruction as well as cell disintegration will occur. This leads to an increase of soluble substances and fine particles. Furthermore, biochemical reactions may appear during or immediately after disintegration. The influence of disintegration of excess sludge on anaerobic digestion was studied in full scale. A stirred ball mill, an ultrasound disintegrator, a lysate centrifuge and ozone treatment were used. The results of the degradation process were compared to a reference system without pre-treatment. An enhancement of the degree of degradation of 7.4% to 20% was observed. The pollution of sludge water as well as the dewatering properties of the digested sludge were investigated. COD and ammonia in the sludge water were increased and a higher polymer demand was observed while the solid content after dewatering stayed almost unchanged. Based on these results the cost effectiveness has been assessed taking into account different conditions (size of WWTP, cost for disposal, etc.). Capital and energy costs are the main factors while the decrease in disposal costs due to the reduced amount of sludge is the main profit factor.

scholarly journals Edukasi Pengelolaan Sampah Plastik Dari Rumah Tangga Menjadi Ecobrick

2021 ◽  
Vol 2 (2) ◽  
pp. 117-126
Author(s):  
Titien Yusnita ◽  
Febri Palupi Muslikhah ◽  
Machyudin Agung Harahap
Keyword(s):  
Waste Management ◽  
Management Training ◽  
Plastic Waste ◽  
Household Waste ◽  
Plastic Packaging ◽  
Training Activity ◽  
Packaging Waste ◽  
Natural Beauty ◽  
The World

The problem of waste is always an interesting thing that never runs out to find a solution. One of them is plastic packaging waste that is widely used by the community and cannot be decomposed again by nature. In line with the SDGs issue, Indonesia is the second largest country that disposes of plastic waste in the world after China. This is very dangerous for the natural beauty of Indonesia's vast seas, and destroys a very diverse ecosystem. Existing plastic waste that comes from household waste, it can be used easily and cheaply into Ecobrick. Ecobrick is a term for the result of managing plastic waste into a brick that can be used as useful items such as chairs or tables. This plastic waste management training activity was carried out for housewives in Cibitung Tengah Village, Bogor Regency to find out the use of plastic waste that can be recycled to be used as useful goods. In addition, to provide awareness of the importance of sorting household waste in order to help preserve nature. Keywords: ecobricks, management, household, plastic waste  

scholarly journals Determination of the composition of multilayer plastic packaging with NIR spectroscopy

Detritus ◽  
2020 ◽  
pp. 62-66
Author(s):  
Xiaozheng Chen ◽  
Nils Kroell ◽  
Alexander Feil ◽  
Thomas Pretz
Keyword(s):  
Infrared Spectroscopy ◽  
Near Infrared ◽  
State Of The Art ◽  
Nir Spectroscopy ◽  
Waste Recycling ◽  
Point Of View ◽  
Plastic Packaging ◽  
Post Industrial ◽  
Detection And Separation

In food and medical packaging, multiple layers of different polymers are combined in order to achieve optimal functional properties for various applications. Flexible multilayer plastic packaging achieves a reduction in weight compared to other packaging products with the same function, saving material and in transportation costs. Recycling of post-industrial multilayer packaging was achieved by some companies, but the available technologies are limited to specific polymer types. For post-consumer waste, recycling of multilayer packaging has not been achieved yet. One of the main challenges in plastic sorting is that the detection and separation of multilayer packaging from other materials is not possible yet. In this study, the possibility to detect and sort flexible multilayer plastic packaging was investigated with near-infrared spectroscopy, which is the state-of-the-art technology for plastic sorting. The results show that from a detection and classification point of view, sorting of monolayer, two- and three-layers samples under laboratory conditions is possible. According to the captured data, the sequence of layers has little influence on the spectra. In case of glossy samples, the spectra are influenced by printed surfaces. With an increase in thickness, the spectra get more characteristic, which makes the classification easier. Our results indicate that the sorting of post-consumer multilayer plastic packaging by main composition is theoretically achievable.

scholarly journals Use and disposal of disposable plastic packaging by retail chains and catering companies

2020 ◽  
Vol 5 (4) ◽  
pp. 356-363
Author(s):  
Elena Yu. Panasenkova ◽  
◽  
Olga E. Gruzdeva ◽  
Maria G. Kuznetsova ◽  
◽  
...  
Keyword(s):  
Waste Recycling ◽  
Plastic Waste ◽  
Raw Material ◽  
Polymer Waste ◽  
Plastic Packaging ◽  
Legal Documents ◽  
Effective System ◽  
Retail Chains ◽  
Polymeric Waste ◽  
Disposable Plastic

The increased use of disposable plastic consumer packaging, especially in the sanitary and epidemiological conditions of COVID-19, makes it necessary to dispose of the resulting waste. The problem is aggravated by the weak processing of waste, which is stored and not destroyed in nature. In this regard, the purpose of the article is to analyze the problems caused by the consumption and disposal of plastic disposable plastic packaging by retail chains and public catering companies. A brief comparative analysis of the composition and quantities of the plastic waste was carried out. The legal documents governing the waste management in Russia and abroad were studied. The Russian waste recycling market was compared with the foreign ones. Data on polymeric waste(composition, quantity, share in the total mass of waste, cost, and possibility of using as a secondary raw material) were studied. The lack of an effective system for collecting polymer waste and its utilization in Russia was emphasized and compared with Asian, European and American countries. In these countries, there are regulatory documents governing the collection and recycling of plastic products; the production itself is economically attractive. Recommendations aimed to encourage manufacturers to recycle waste were given; options for solving the problem of recycling plastic waste on a legislative, economic and managerial basis were offered.

Sign in / Sign up

Export Citation Format

Share Document