Yacht Design with Computers: New Methods for New Tools

1983 ◽  
Author(s):  
George S. Hazen ◽  
Steve Killing
Keyword(s):  
Design Process ◽  
Preliminary Design ◽  
Original Design ◽  
New Methods ◽  
Design Office ◽  
Final Design ◽  
Cad Cam

From the perspective of the design office, this paper examines the manner in which computers are streamlining and changing the design process for today's sailing yachts. Starting with preliminary design and progressing through the more detailed aspects of final design, the computer's varying roles in the design process are traced with examples drawn from currently implemented programs. In addition to its customary role as a bookkeeper, the computer's remarkable graphics capabilities are highlighted. The authors offer a glimpse of what programs and hardware tomorrow's yacht designer will use as frequently as his curves and battens. The paper covers such subjects as design follow-up, sailing analysis and feedback into the original design process. Since designers are not the only ones to benefit from the computer revolution, the authors have included sections on computer generated sailing aids for the yachtsman and possible CAD/CAM applications for the boatbuilder.

Optimization Methods for Calculating Design Imprecision

1995 ◽  
Author(s):  
William S. Law ◽  
Erik K. Antonsson
Keyword(s):  
Fuzzy Sets ◽  
Design Process ◽  
Optimization Methods ◽  
Experiment Design ◽  
Design Evaluation ◽  
Preliminary Design ◽  
New Methods ◽  
Evaluation Functions ◽  
Incomplete Design ◽  
Alternative Designs

Abstract The preliminary design process is characterized by imprecision: the vagueness of an incomplete design description. The Method of Imprecision uses the mathematics of fuzzy sets to explicitly represent and manipulate imprecise preliminary design information, enabling the designer to explore the space of alternative designs in the context of the designer and customer’s preferences among alternatives. This paper introduces new methods to perform Method of Imprecision calculations for general non-monotonic design evaluation functions that address the practical necessity to minimize the number of function evaluations. These methods utilize optimization and experiment design.

scholarly journals Non-linear Impact of the Short Circuit Impedance Selection on the Cost Optimized Power Transformer Design

2020 ◽  
Vol 64 (3) ◽  
pp. 221-228
Author(s):  
Tamás Orosz ◽  
Zoltán Ádám Tamus
Keyword(s):  
Design Process ◽  
Power Transformer ◽  
Short Circuit ◽  
Design Rule ◽  
Design Parameters ◽  
Electrical Machine ◽  
Preliminary Design ◽  
Large Power ◽  
Final Design ◽  
The Cost

Since the electrical machine design is a complex task it can be divided into sub-problems, e.g. preliminary and final design processes and checking of the final design. This paper deals with the preliminary design process, which provides the key-design parameters of the electrical machine. Traditionally, these electrical machine models in preliminary design phase neglect or use oversimplified insulation system models and the tap changing selection is not involved during the calculation of key-design parameters. The aim of this study is to assess the effect of the insulation distance minimization and tap-changing on the key design parameters of a cost-optimized large power transformer. For this purpose, the paper shows some examples, where the cost optimal design — in contrast to the classical insulation design rule — contains larger insulation distances than the possible minimum values. The effect of tap-changing methods are also investigated. These cost optimization made by a verified, metaheuristic method-based transformer optimization algorithm. The results show involving the insulation design and tap-changing selection into the preliminary design process can provide more economical designs.

Desain Sarana Informasi Di Taman Samarendah Samarinda

2021 ◽  
Vol 9 (1) ◽  
pp. 9
Author(s):  
Andi Farid Hidayanto ◽  
Nur Husniah Thamrin
Keyword(s):  
Design Process ◽  
Preliminary Design ◽  
Access To Information ◽  
Design Development ◽  
The People ◽  
Final Design ◽  
Information Board

Samarendah Park is one of the new icons in Samarinda City. Its function has been felt by the people of Samarinda since it opened. This park can be used as a place to exercise, play children, or just relax. Now the park which is in the center of Samarinda City preening becomes increasingly beautiful. Taman Samarendah is reorganized so that it can be enjoyed more and more by Samarinda residents and tourists. Therefore, a signage is needed that is used to make information that guides the place and appeals. The purpose of this design is to make an information board that can provide information about Samarendah Park and facilities around the park. In this design process using the Vinod Ghoel method which includes Preliminary Design, Design Development, Final Design & Prototype. This design produces a product that is the Samarendah park information board. With the existence of the Samarendah park information board, it is hoped that it can facilitate access to information on places and appeals on location for visitors

An Integrated Procedure for Hull Design and Production

1987 ◽  
Vol 3 (03) ◽  
pp. 175-185
Author(s):  
Renzo Oi Luca
Keyword(s):  
Design Process ◽  
Structural Component ◽  
User Model ◽  
Preliminary Design ◽  
Fully Integrated ◽  
Cad Cam ◽  
Hull Design ◽  
Comprehensive Modeling ◽  
Effective Integration ◽  
Design And Production

The effective integration of hull design and production procedures is achieved by applying a comprehensive modeling technique that recognizes both the stages in the design process and also the structural component generation requirements. This paper describes an operational CAD/CAM system that is fully integrated from preliminary design through production. Some features discussed are ship-oriented model representations, common descriptive techniques, multi-user model access, and general graphic technology.

Contemporary Methods of Designing Rail Vehicle Running Systems with the Use of CAD and CAM Solutions

2020 ◽  
Vol 64 (187) ◽  
pp. 75-80
Author(s):  
Tomasz Antkowiak ◽  
Marcin Kruś
Keyword(s):  
System Design ◽  
Preliminary Design ◽  
Support Design ◽  
Detailed Design ◽  
Final Shape ◽  
Rail Vehicle ◽  
Design Engineers ◽  
Running System ◽  
Cad Cam

The article discusses the process of designing the running system of a rail vehicle using CAD and CAM tools as the solutions supporting the process. It describes the particular stages of design taking its final shape: from a preliminary design, through a detailed design, ending with the stage of production. Each stage includes a presentation of how CAD and CAM tools are used to support design engineers in their practice. Keywords: running system, design, CAD, CAM

scholarly journals Giving a Voice to Students with Disabilities to Design Library Experiences: An Ethnographic Study

Societies ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 61
Author(s):  
Monica Cerdan Chiscano
Keyword(s):  
Resource Allocation ◽  
Focus Groups ◽  
Students With Disabilities ◽  
Design Process ◽  
Collaborative Research ◽  
Management Style ◽  
Ethnographic Study ◽  
Experience Design ◽  
Research Project

Although librarians generally display an inclusive management style, barriers to students with disabilities remain widespread. Against this backdrop, a collaborative research project called Inclusive Library was launched in 2019 in Catalonia, Spain. This study empirically tests how involving students with disabilities in the experience design process can lead to new improvements in users’ library experience. A mix of qualitative techniques, namely focus groups, ethnographic techniques and post-experience surveys, were used to gain insights from the 20 libraries and 20 students with disabilities collaborating in the project. Based on the participants’ voices and follow-up experiences, the study makes several suggestions on how libraries can improve their accessibility. Results indicate that ensuring proper resource allocation for accessibility improves students with disabilities’ library experience. Recommendations for library managers are also provided.

scholarly journals Full Zirconia Implant-Born Prosthetic Rehabilitation with CAD/CAM Technology after Accurate Digital Planning. A Case Report

2021 ◽  
Vol 18 (15) ◽  
pp. 7998
Author(s):  
Riccardo Scaringi ◽  
Michele Nannelli ◽  
Alessio Franchina ◽  
Giuseppe Lizio ◽  
Luigi V. Stefanelli ◽  
...  
Keyword(s):  
Soft Tissues ◽  
Ceramic Materials ◽  
Surgical Removal ◽  
Holistic Treatment ◽  
Single Crown ◽  
Digital Planning ◽  
Cad Cam ◽  
Treatment Philosophy ◽  
Zirconia Implant

CAD/CAM technology can enhance the dentistry application of ceramic materials that meet the more relevant biocompatibility and aesthetics demands. In implant-borne prosthesis rehabilitation, yttria-stabilized zirconia appeared to be a valid alternative to metal-alloys and titanium, with comparable mechanical properties and even better interaction with bone and soft tissues. The improvement of monolithic CAD/CAM manufacturing allows for a reliable, predictable, and rapid workflow that can correspond to a holistic treatment philosophy associated with zirconia fixtures. This reported clinical case highlights the advantages of this approach in resolving particularly functionally and aesthetically complex situations. A 40-year-old patient with permanent canine impaction and the persistence of a deciduous tooth compromised by caries was successfully rehabilitated with the surgical removal of the enclosed tooth, the seating of a mono-phase zirconia implant after the deciduous extraction and its loading with a zirconia single crown, without any clinical or radiographical alteration up to seven years follow-up.

Aortic Remodeling After Custom-Made Candy-Plug for Distal False Lumen Occlusion in Aortic Dissection

2021 ◽  
pp. 152660282199672
Author(s):  
Ahmed Eleshra ◽  
Fiona Rohlffs ◽  
Konstantinos Spanos ◽  
Giuseppe Panuccio ◽  
Franziska Heidemann ◽  
...  
Keyword(s):  
Aortic Dissection ◽  
Clinical Success ◽  
False Lumen ◽  
High Rate ◽  
Single Center ◽  
Original Design ◽  
Mortality And Morbidity ◽  
Custom Made ◽  
Aortic Remodeling

Purpose: To report a single-center experience with the use of a custom-made Candy-Plug (CP) for distal false-lumen (FL) occlusion in subacute and chronic aortic dissection (AD). Materials and Methods: A retrospective single-center analysis was conducted on consecutive patients with subacute and chronic AD who were treated with a custom-made CP for distal FL occlusion using 3 design generations (CP I to CP III) from October 2013 to September 2019. Results: A custom-made CP was used in 57 patients. Of these, 34 patients (29 males, mean age 62±10 years) were treated with a CP I vs 23 patients (16 males, mean age 59±17 years) with CP II/III. Technical success was achieved in 57 (100%) patients. Clinical success was achieved in 54 (95%) patients; 33 (97%) in CP I group vs 21 (91%) patients in CP II/III group, p=0.116. The mean hospital stay was 10±8 days (9±5 days in CP I group vs 13±9 days in CP II/III, p=0.102). The 30-day computed tomography angiography (CTA) confirmed successful CP placement at the intended level in all patients within both groups. Early complete FL occlusion was achieved in 50 (88%) patients; 30 (88%) patients in CP I group vs 20 (87%) in CP II/III group, p=0.894. Follow up CTA was available in 44 (77%) patients. Of these; 30/34 (88%) patients in CP I group with mean follow-up 29±17 months) vs. 14/23 (61%) patients with mean follow-up 14±5 months in CP II/III group. Thoracic aortic remodeling was achieved in 34/44 (77%) patients; 25/30 (83%) patients in CP I group vs 9/14 (64%) patients in CP II/III group, p=0.197. The aneurysm size remained stable in 9/44 (20%) patients; 5/30 (17%) patients in CP I group vs 4/14 (29%) patients in CP II/III group, p=0.741. The thoracic aneurysm increased size was seen in 1/44 (2%) patient. This patient was in CPII/III group. Conclusion: CP technique using custom-made devices is technically feasible with a low mortality and morbidity, and a high rate of aortic remodeling. Both, the original design (CP I) and newer designs with a self-closing central sleeve (CP II and CP III) showed similar excellent outcomes.

Impact of Secondary Flow on the Accuracy of Simplified Design Methods for Steam Turbine Stages

2012 ◽  
Author(s):  
Jan Schumann ◽  
Ulrich Harbecke ◽  
Daniel Sahnen ◽  
Thomas Polklas ◽  
Peter Jeschke ◽  
...  
Keyword(s):  
Secondary Flow ◽  
Steam Turbine ◽  
Design Process ◽  
Design Method ◽  
Computing Time ◽  
Leading Edge ◽  
Design Methods ◽  
Preliminary Design ◽  
Line Design ◽  
Radial Equilibrium

The subject of the presented paper is the validation of a design method for HP and IP steam turbine stages. Common design processes have been operating with simplified design methods in order to quickly obtain feasible stage designs. Therefore, inaccuracies due to assumptions in the underlying methods have to be accepted. The focus of this work is to quantify the inaccuracy of a simplified design method compared to 3D Computational Fluid Dynamics (CFD) simulations. Short computing time is very convenient in preliminary design; therefore, common design methods work with a large degree of simplification. The origin of the presented analysis is a mean line design process, dealing with repeating stage conditions. Two features of the preliminary design are the stage efficiency, based on loss correlations, and the mechanical strength, obtained by using the beam theory. Due to these simplifications, only a few input parameters are necessary to define the primal stage geometry and hence, the optimal design can easily be found. In addition, by using an implemented law to take the radial equilibrium into account, the appropriate twist of the blading can be defined. However, in comparison to the real radial distribution of flow angles, this method implies inaccuracies, especially in regions of secondary flow. In these regions, twisted blades, developed by using the simplified radial equilibrium, will be exposed to a three-dimensional flow, which is not considered in the design process. The analyzed design cases show that discrepancies at the hub and shroud section do exist, but have minor effects. Even the shroud section, with its thinner leading-edge, is not vulnerable to these unanticipated flow angles.

Bringing Ergonomics to the Design of a Behavioural Care Unit

2000 ◽  
Vol 44 (8) ◽  
pp. 8-11
Author(s):  
Jacqueline B. Barnett
Keyword(s):  
Design Process ◽  
Iterative Process ◽  
User Needs ◽  
Work Processes ◽  
Team Members ◽  
Early Design ◽  
Design Changes ◽  
Final Design ◽  
The Individual ◽  
The Cost

The application of ergonomics is important when considering the built environment. In order to create an environment where form follows function, a detailed understanding of the tasks performed by the individuals who will live and work in the facility is required. Early involvement in the project is key to maximizing the benefit of ergonomics. At Sunnybrook and Women's College Health Sciences Centre in Toronto, Canada, this early intervention was embraced during the design process of a behavioural care unit for aggressive patients. The ergonomist was involved in three phases of design; user needs analysis, block schematics and detailed design. The user needs and characteristics were established using a combination of focus groups, interviews, direct observation, task analysis and critique of current working environments. The challenge was to present the information to the design team in a useful manner. The format chosen was a modification of Userfit (Poulson 1996) that outlined the various characteristics of the patient group and the design consequences with “what does this mean for me” statements. During the block schematics phase an iterative design process was used to ensure that the ergonomic principles and the user needs were incorporated into the design. Ergonomic input was used in determining the room sizes and layout and to ensure work processes were considered. Simple mock-ups and anthropometric data assisted in illustrating the need for design changes. Examples that highlight the areas of greatest impact of ergonomic intervention include the patient bathrooms, showers and tub room. Significant changes were made to the design to improve the safety of the work and living space of the end users. One of the greatest challenges was having an appreciation for the individual goals of the team members. Ensuring there was adequate space for equipment and staff often resulted in recommendations for increased space. This in turn would increase the cost of the project. The architect and, later in the project, the engineer had goals of bringing the project in on budget. The final design was very much a team effort and truly die result of an iterative process. The sum of the individual contributions could not match the combined efforts. It was only through the ergonomic contributions in this early design phase that the needs of the staff, patients and families could be so well represented. The success of the iterative process provides the foundation for bringing ergonomics considerations into the early design stages of future projects.

Sign in / Sign up

Export Citation Format

Share Document