Relationship between acoustic cavitation bubble behavior and output signal from tough hydrophone using high-speed camera in high-frequency and low-frequency acoustic fields

2018 ◽  
Vol 57 (7S1) ◽  
pp. 07LE15 ◽  
Author(s):  
Nagaya Okada ◽  
Michihisa Shiiba ◽  
Shinobu Yamauchi ◽  
Toshio Sato ◽  
Shinichi Takeuchi
2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Buntaro Zempo ◽  
Natsuko Tanaka ◽  
Eriko Daikoku ◽  
Fumihito Ono

AbstractThe mating behavior of teleost fish consists of a sequence of stereotyped actions. By observing mating of zebrafish under high-speed video, we analyzed and characterized a behavioral cascade leading to successful fertilization. When paired, a male zebrafish engages the female by oscillating his body in high frequency (quivering). In response, the female pauses swimming and bends her body (freezing). Subsequently, the male contorts his trunk to enfold the female’s trunk. This behavior is known as wrap around. Here, we found that wrap around behavior consists of two previously unidentified components. After both sexes contort their trunks, the male adjusts until his trunk compresses the female’s dorsal fin (hooking). After hooking, the male trunk slides away from the female’s dorsal fin, simultaneously sliding his pectoral fin across the female’s gravid belly, stimulating egg release (squeezing/spawning). Orchestrated coordination of spawning presumably increases fertilization success. Surgical removal of the female dorsal fin inhibited hooking and the transition to squeezing. In a neuromuscular mutant where males lack quivering, female freezing and subsequent courtship behaviors were absent. We thus identified traits of zebrafish mating behavior and clarified their roles in successful mating.


2010 ◽  
Vol 103 (4) ◽  
pp. 2195-2207 ◽  
Author(s):  
Robert A. Jenks ◽  
Ashkan Vaziri ◽  
Ali-Reza Boloori ◽  
Garrett B. Stanley

Sensory systems must form stable representations of the external environment in the presence of self-induced variations in sensory signals. It is also possible that the variations themselves may provide useful information about self-motion relative to the external environment. Rats have been shown to be capable of fine texture discrimination and object localization based on palpation by facial vibrissae, or whiskers, alone. During behavior, the facial vibrissae brush against objects and undergo deflection patterns that are influenced both by the surface features of the objects and by the animal's own motion. The extent to which behavioral variability shapes the sensory inputs to this pathway is unknown. Using high-resolution, high-speed videography of unconstrained rats running on a linear track, we measured several behavioral variables including running speed, distance to the track wall, and head angle, as well as the proximal vibrissa deflections while the distal portions of the vibrissae were in contact with periodic gratings. The measured deflections, which serve as the sensory input to this pathway, were strongly modulated both by the properties of the gratings and the trial-to-trial variations in head-motion and locomotion. Using presumed internal knowledge of locomotion and head-rotation, gratings were classified using short-duration trials (<150 ms) from high-frequency vibrissa motion, and the continuous trajectory of the animal's own motion through the track was decoded from the low frequency content. Together, these results suggest that rats have simultaneous access to low- and high-frequency information about their environment, which has been shown to be parsed into different processing streams that are likely important for accurate object localization and texture coding.


2018 ◽  
Vol 148 ◽  
pp. 16001
Author(s):  
A. Austefjord ◽  
S. Blaylock ◽  
I. Forster ◽  
M. Sheehan ◽  
C. Wright

This paper describes the design, construction and operation of a small-scale drilling rig for the purpose of investigation of the effect of axial excitation on the drilling process. The rig is bench top in size and has been designed to drill small rock samples, whilst at the same allowing axial excitation to be induced into the drilling process. The rig has been designed to drill the rock without any drilling fluids – so allowing improved observation of the chip generation process. Additionally, the drilling weight on bit is applied via masses, so allowing greater representation of the dynamic behavior of the drilling process – i.e. capturing more natural frequencies. The results from the rig have been obtained over two frequency ranges – low frequency (0-50 Hz) and high frequency (50-250 Hz). Results show that improved rate of penetration is obtained with axial excitation – with low and high frequency optima occurring. These optima can be related to the behavior of the string in the two frequency ranges – in the low frequency range, the entire string acts in unison; whereas at high frequency, only the bit/rock system is active. As a result, it is concluded that for low frequency operation, only information about the drill string is required to optimize performance; whereas for high frequency operation, information about the bit/rock system is required to optimize performance. Observation of the chip generation process via high speed video has shown that during axial excitation, regular shaped bricks are ejected when compared with the typical wedge- shaped chips that are normally ejected during the drilling process. It is concluded that, during the axial excitation process, the chips are being ejected via a levering action, so allowing a more efficient and quicker process. MIT [1] provided background classes, project guidance and project review as part of an NOV/MIT advanced technology program. Larger scale lab tests and/or field tests are required to verify/validate these conclusions.


Author(s):  
Deqi Chen ◽  
Ren Song ◽  
Liang-ming Pan

Bubble behavior in narrow channel can be quite different with that in conventional channel. When the bubble reaches a size which is comparable with the channel dimension, the bubble is confined by the channel wall. This influences the bubble evolution significantly in the narrow channel. Then the characteristics of pressure drop in the narrow channel is affected significantly. In order to investigate the effect of bubble behavior on flow boiling pressure drop, a visual study was carried out with a high speed camera (5,000 frame per second was used) to record the bubble behavior. It is found that the OSV (Onset of Significant Vapor) emerges much earlier in narrow channel when comparing with that in conventional channel. A revised correlation for prediction of the real void fraction is proposed based on the experimental investigation. It is also found that the bubble behavior affects the pressure drop in narrow channel significantly, and the channel will be blocked easily when the confined vapor cluster appears. The pressure drop, however, dose not increase linearly with increasing void fraction, and the minimum pressure drop occurs with 60% void fraction. With increasing void fraction, the bubble behavior is more intense and turbulent, which induces more severe fluctuation in pressure drop.


2016 ◽  
Vol 715 ◽  
pp. 139-146 ◽  
Author(s):  
Tadayoshi Shoyama ◽  
Koji Fujimoto

Bearings of small turbo machines support high speed rotors rotating with the frequency over 1 [kHz]. Such bearings are often supported with O-rings made of soft materials like rubber to attenuate high frequency oscillations. Dynamic properties of rubber supporters have been measured experimentally for individual dimensions, but the universal prediction of dynamic properties for various frequencies is difficult not only because rubbers exhibit nonlinearity against its strain, but because O-ring supporters deform heterogeneously. For the precise prediction, it is necessary to investigate the viscoelasticity of rubber under various deformations and frequencies. Such properties can be measured by the standard shear vibration non-response method of ISO 6721-6 (JIS K 7244-6). However this is applicable only to low frequency range under 100 [Hz] because of the limitation of resonance frequency of the load cell. In this research, based on BERM (Base Excitation Resonant Mass) method, a new method was developed to measure the complex shear modulus at high frequencies up to 1 [kHz] of rubber sheets under homogeneous shear deformations. In the presented method, the force is calculated from the acceleration of the mass instead of the direct measurement by a load cell. Hence accurate measurement became possible even in the range beyond the resonance frequency of a load cell. The measured shear storage modulus G’ and shear loss modulus G” of deformed rubber were presented.


2020 ◽  
Vol 2 (1) ◽  
Author(s):  
Siwei Dong ◽  
Jianqiang Chen ◽  
Xianxu Yuan ◽  
Xi Chen ◽  
Guoliang Xu

AbstractProperties of wall pressure beneath a transitional hypersonic boundary layer over a 7∘ half-angle blunt cone at angle of attack 6∘ are studied by Direct Numerical Simulation. The wall pressure has two distinct frequency peaks. The low-frequency peak with f≈10−50 kHz is very likely the unsteady crossflow mode based on its convection direction, i.e. along the axial direction and towards the windward symmetry ray. High-frequency peaks are roughly proportional to the local boundary layer thickness. Along the trajectories of stationary crossflow vortices, the location of intense high-frequency wall pressure moves from the bottom of trough where the boundary layer is thin to the bottom of shoulder where the boundary layer is thick. By comparing the pressure field with that inside a high-speed transitional swept-wing boundary layer dominated by the z-type secondary crossflow mode, we found that the high-frequency signal originates from the Mack mode and evolves into the secondary crossflow instability.


Author(s):  
Fanghui Xu ◽  
Dawei Dong ◽  
Yan Huang ◽  
Rui Zhang ◽  
Shizhe Song ◽  
...  

The diesel multiple unit (DMU) has been widely used in high-speed railway service due to its flexibility and economy. Considering the broadband and complex vibration generated by DMU power package, the advanced semi-active suspension with magnetorheological (MR) dampers is introduced to promote anti-vibration performance. In this work, a comprehensive optimal design approach for MR damper used in DMU power package is proposed. Quasi-static modeling process is conducted to obtain MR damper's low-frequency outputs, while its high-frequency damping forces are calculated by physical modeling considering the fluid compressibility and piston assembly inertia. Then the objective functions and optimization variables are determined. Based on response surface and linear correlation analysis, the influence of the optimal variables on the objective functions is discussed. Using reference-point based nondominated sorting approach (NSGA-III), the evolutionary many-objective optimization is conducted. In addition, magnetic design is incorporated into the optimal process to ensure the magnetic flux density in the effective working area. Finally, an optimized MR damper prototype is manufactured and tested. By comparing the experimental damping force with calculated results in both low-frequency and high-frequency ranges, the effectiveness of the presented optimal method for MR dampers is validated.


Sign in / Sign up

Export Citation Format

Share Document