scholarly journals AresB-Net: accurate residual binarized neural networks using shortcut concatenation and shuffled grouped convolution

2021 ◽  
Vol 7 ◽  
pp. e454
Author(s):  
HyunJin Kim

This article proposes a novel network model to achieve better accurate residual binarized convolutional neural networks (CNNs), denoted as AresB-Net. Even though residual CNNs enhance the classification accuracy of binarized neural networks with increasing feature resolution, the degraded classification accuracy is still the primary concern compared with real-valued residual CNNs. AresB-Net consists of novel basic blocks to amortize the severe error from the binarization, suggesting a well-balanced pyramid structure without downsampling convolution. In each basic block, the shortcut is added to the convolution output and then concatenated, and then the expanded channels are shuffled for the next grouped convolution. In the downsampling when stride >1, our model adopts only the max-pooling layer for generating low-cost shortcut. This structure facilitates the feature reuse from the previous layers, thus alleviating the error from the binarized convolution and increasing the classification accuracy with reduced computational costs and small weight storage requirements. Despite low hardware costs from the binarized computations, the proposed model achieves remarkable classification accuracies on the CIFAR and ImageNet datasets.

CivilEng ◽  
2021 ◽  
Vol 2 (4) ◽  
pp. 1052-1064
Author(s):  
Ammar Alzarrad ◽  
Chance Emanuels ◽  
Mohammad Imtiaz ◽  
Haseeb Akbar

Solar panel location assessment is usually a time-consuming manual process, and many criteria should be taken into consideration before deciding. One of the most significant criteria is the building location and surrounding environment. This research project aims to propose a model to automatically identify potential roof spaces for solar panels using drones and convolutional neural networks (CNN). Convolutional neural networks (CNNs) are used to identify buildings’ roofs from drone imagery. Transfer learning on the CNN is used to classify roofs of buildings into two categories of shaded and unshaded. The CNN is trained and tested on separate imagery databases to improve classification accuracy. Results of the current project demonstrate successful segmentation of buildings and identification of shaded roofs. The model presented in this paper can be used to prioritize the buildings based on the likelihood of getting benefits from switching to solar energy. To illustrate an implementation of the presented model, it has been applied to a selected neighborhood in the city of Hurricane in West Virginia. The research results show that the proposed model can assist investors in the energy and building sectors to make better and more informed decisions.


2020 ◽  
Vol 34 (04) ◽  
pp. 6656-6663 ◽  
Author(s):  
Huaxiu Yao ◽  
Chuxu Zhang ◽  
Ying Wei ◽  
Meng Jiang ◽  
Suhang Wang ◽  
...  

Towards the challenging problem of semi-supervised node classification, there have been extensive studies. As a frontier, Graph Neural Networks (GNNs) have aroused great interest recently, which update the representation of each node by aggregating information of its neighbors. However, most GNNs have shallow layers with a limited receptive field and may not achieve satisfactory performance especially when the number of labeled nodes is quite small. To address this challenge, we innovatively propose a graph few-shot learning (GFL) algorithm that incorporates prior knowledge learned from auxiliary graphs to improve classification accuracy on the target graph. Specifically, a transferable metric space characterized by a node embedding and a graph-specific prototype embedding function is shared between auxiliary graphs and the target, facilitating the transfer of structural knowledge. Extensive experiments and ablation studies on four real-world graph datasets demonstrate the effectiveness of our proposed model and the contribution of each component.


Author(s):  
Mohannad Elhamod ◽  
Kelly M. Diamond ◽  
A. Murat Maga ◽  
Yasin Bakis ◽  
Henry L. Bart ◽  
...  

AbstractFish species classification is an important task that is the foundation of many industrial, commercial, ecological, and scientific applications involving the study of fish distributions, dynamics, and evolution.While conventional approaches for this task use off-the-shelf machine learning (ML) methods such as existing Convolutional Neural Network (ConvNet) architectures, there is an opportunity to inform the ConvNet architecture using our knowledge of biological hierarchies among taxonomic classes.In this work, we propose infusing phylogenetic information into the model’s training to guide its structure and relationships among the extracted features. In our extensive experimental analyses, the proposed model, named Hierarchy-Guided Neural Network (HGNN), outperforms conventional ConvNet models in terms of classification accuracy under scarce training data conditions.We also observe that HGNN shows better resilience to adversarial occlusions, when some of the most informative patch regions of the image are intentionally blocked and their effect on classification accuracy is studied.


Author(s):  
K. Maystrenko ◽  
A. Budilov ◽  
D. Afanasev

Goal. Identify trends and prospects for the development of radar in terms of the use of convolutional neural networks for target detection. Materials and methods. Analysis of relevant printed materials related to the subject areas of radar and convolutional neural networks. Results. The transition to convolutional neural networks in the field of radar is considered. A review of papers on the use of convolutional neural networks in pattern recognition problems, in particular, in the radar problem, is carried out. Hardware costs for the implementation of convolutional neural networks are analyzed. Conclusion. The conclusion is made about the need to create a methodology for selecting a network topology depending on the parameters of the radar task.


2020 ◽  
Vol 23 (4) ◽  
pp. 274-284 ◽  
Author(s):  
Jingang Che ◽  
Lei Chen ◽  
Zi-Han Guo ◽  
Shuaiqun Wang ◽  
Aorigele

Background: Identification of drug-target interaction is essential in drug discovery. It is beneficial to predict unexpected therapeutic or adverse side effects of drugs. To date, several computational methods have been proposed to predict drug-target interactions because they are prompt and low-cost compared with traditional wet experiments. Methods: In this study, we investigated this problem in a different way. According to KEGG, drugs were classified into several groups based on their target proteins. A multi-label classification model was presented to assign drugs into correct target groups. To make full use of the known drug properties, five networks were constructed, each of which represented drug associations in one property. A powerful network embedding method, Mashup, was adopted to extract drug features from above-mentioned networks, based on which several machine learning algorithms, including RAndom k-labELsets (RAKEL) algorithm, Label Powerset (LP) algorithm and Support Vector Machine (SVM), were used to build the classification model. Results and Conclusion: Tenfold cross-validation yielded the accuracy of 0.839, exact match of 0.816 and hamming loss of 0.037, indicating good performance of the model. The contribution of each network was also analyzed. Furthermore, the network model with multiple networks was found to be superior to the one with a single network and classic model, indicating the superiority of the proposed model.


Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1213
Author(s):  
Ahmed Aljanad ◽  
Nadia M. L. Tan ◽  
Vassilios G. Agelidis ◽  
Hussain Shareef

Hourly global solar irradiance (GSR) data are required for sizing, planning, and modeling of solar photovoltaic farms. However, operating and controlling such farms exposed to varying environmental conditions, such as fast passing clouds, necessitates GSR data to be available for very short time intervals. Classical backpropagation neural networks do not perform satisfactorily when predicting parameters within short intervals. This paper proposes a hybrid backpropagation neural networks based on particle swarm optimization. The particle swarm algorithm is used as an optimization algorithm within the backpropagation neural networks to optimize the number of hidden layers and neurons used and its learning rate. The proposed model can be used as a reliable model in predicting changes in the solar irradiance during short time interval in tropical regions such as Malaysia and other regions. Actual global solar irradiance data of 5-s and 1-min intervals, recorded by weather stations, are applied to train and test the proposed algorithm. Moreover, to ensure the adaptability and robustness of the proposed technique, two different cases are evaluated using 1-day and 3-days profiles, for two different time intervals of 1-min and 5-s each. A set of statistical error indices have been introduced to evaluate the performance of the proposed algorithm. From the results obtained, the 3-days profile’s performance evaluation of the BPNN-PSO are 1.7078 of RMSE, 0.7537 of MAE, 0.0292 of MSE, and 31.4348 of MAPE (%), at 5-s time interval, where the obtained results of 1-min interval are 0.6566 of RMSE, 0.2754 of MAE, 0.0043 of MSE, and 1.4732 of MAPE (%). The results revealed that proposed model outperformed the standalone backpropagation neural networks method in predicting global solar irradiance values for extremely short-time intervals. In addition to that, the proposed model exhibited high level of predictability compared to other existing models.


Entropy ◽  
2021 ◽  
Vol 23 (2) ◽  
pp. 223
Author(s):  
Yen-Ling Tai ◽  
Shin-Jhe Huang ◽  
Chien-Chang Chen ◽  
Henry Horng-Shing Lu

Nowadays, deep learning methods with high structural complexity and flexibility inevitably lean on the computational capability of the hardware. A platform with high-performance GPUs and large amounts of memory could support neural networks having large numbers of layers and kernels. However, naively pursuing high-cost hardware would probably drag the technical development of deep learning methods. In the article, we thus establish a new preprocessing method to reduce the computational complexity of the neural networks. Inspired by the band theory of solids in physics, we map the image space into a noninteraction physical system isomorphically and then treat image voxels as particle-like clusters. Then, we reconstruct the Fermi–Dirac distribution to be a correction function for the normalization of the voxel intensity and as a filter of insignificant cluster components. The filtered clusters at the circumstance can delineate the morphological heterogeneity of the image voxels. We used the BraTS 2019 datasets and the dimensional fusion U-net for the algorithmic validation, and the proposed Fermi–Dirac correction function exhibited comparable performance to other employed preprocessing methods. By comparing to the conventional z-score normalization function and the Gamma correction function, the proposed algorithm can save at least 38% of computational time cost under a low-cost hardware architecture. Even though the correction function of global histogram equalization has the lowest computational time among the employed correction functions, the proposed Fermi–Dirac correction function exhibits better capabilities of image augmentation and segmentation.


2021 ◽  
Vol 11 (6) ◽  
pp. 2535
Author(s):  
Bruno E. Silva ◽  
Ramiro S. Barbosa

In this article, we designed and implemented neural controllers to control a nonlinear and unstable magnetic levitation system composed of an electromagnet and a magnetic disk. The objective was to evaluate the implementation and performance of neural control algorithms in a low-cost hardware. In a first phase, we designed two classical controllers with the objective to provide the training data for the neural controllers. After, we identified several neural models of the levitation system using Nonlinear AutoRegressive eXogenous (NARX)-type neural networks that were used to emulate the forward dynamics of the system. Finally, we designed and implemented three neural control structures: the inverse controller, the internal model controller, and the model reference controller for the control of the levitation system. The neural controllers were tested on a low-cost Arduino control platform through MATLAB/Simulink. The experimental results proved the good performance of the neural controllers.


Electronics ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 1367
Author(s):  
Raghida El El Saj ◽  
Ehsan Sedgh Sedgh Gooya ◽  
Ayman Alfalou ◽  
Mohamad Khalil

Privacy-preserving deep neural networks have become essential and have attracted the attention of many researchers due to the need to maintain the privacy and the confidentiality of personal and sensitive data. The importance of privacy-preserving networks has increased with the widespread use of neural networks as a service in unsecured cloud environments. Different methods have been proposed and developed to solve the privacy-preserving problem using deep neural networks on encrypted data. In this article, we reviewed some of the most relevant and well-known computational and perceptual image encryption methods. These methods as well as their results have been presented, compared, and the conditions of their use, the durability and robustness of some of them against attacks, have been discussed. Some of the mentioned methods have demonstrated an ability to hide information and make it difficult for adversaries to retrieve it while maintaining high classification accuracy. Based on the obtained results, it was suggested to develop and use some of the cited privacy-preserving methods in applications other than classification.


Sign in / Sign up

Export Citation Format

Share Document