scholarly journals Roles of phytohormone changes in the grain yield of rice plants exposed to heat: a review

PeerJ ◽  
2019 ◽  
Vol 7 ◽  
pp. e7792 ◽  
Author(s):  
Chao Wu ◽  
She Tang ◽  
Ganghua Li ◽  
Shaohua Wang ◽  
Shah Fahad ◽  
...  
Keyword(s):  
Heat Stress ◽  
Grain Yield ◽  
Grain Filling ◽  
Reproductive Organs ◽  
Grain Weight ◽  
Vascular Bundles ◽  
Yield Traits ◽  
Reproductive Phase ◽  
Initiation Stage ◽  
Heat Events

During its reproductive phase, rice is susceptible to heat stress. Heat events will occur at all stages during the reproductive phase of rice as a result of global warming. Moreover, rice yield traits respond differently to heat stress during panicle initiation, flowering and grain filling. The reduction in the number of spikelets per panicle of heat-stressed plants is due to the attenuated differentiation of secondary branches and their attached florets as well as the promotion of their degradation during the panicle-initiation stage but is not affected by heat stress thereafter. Spikelet sterility as a result of heat stress is attributed not only to physiological abnormalities in the reproductive organs during the flowering stage but also to structural and morphological abnormalities in reproductive organs during the panicle-initiation stage. The reduced grain weight of heat-stressed plants is due to a reduction in nonstructural carbohydrates, undeveloped vascular bundles, and a reduction in glume size during the panicle-initiation stage, while a shortened grain-filling duration, reduced grain-filling rate, and decreased grain width contribute to reduced grain weight during the grain-filling stage. Thus, screening and breeding rice varieties that have comprehensive tolerance to heat stress at all time points during their reproductive stage may be possible to withstand unpredictable heat events in the future. The responses of yield traits to heat stress are regulated by phytohormone levels, which are determined by phytohormone homeostasis. Currently, the biosynthesis and transport of phytohormones are the key processes that determine phytohormone levels in and grain yield of rice under heat stress. Studies on phytohormone homeostatic responses are needed to further reveal the key processes that determine phytohormone levels under heat conditions.

scholarly journals Response of phytohormone homeostasis to heat stress and the roles of phytohormones in rice grain yield: a review

2019 ◽  
Author(s):  
Chao Wu ◽  
She Tang ◽  
Ganghua Li ◽  
Shaohua Wang ◽  
Shah Fahad ◽  
...  
Keyword(s):  
Heat Stress ◽  
Grain Yield ◽  
Grain Filling ◽  
Reproductive Organs ◽  
Reproductive Stage ◽  
Grain Weight ◽  
Rice Grain ◽  
Vascular Bundles ◽  
Rice Varieties ◽  
Heat Effects

Rice is highly susceptible to heat stress at the reproductive stage. In this review, we first summarize recent progress in heat effects on rice grain yield during different reproductive stages. Different responses of yield traits of rice to heat stress during different reproductive stages are identified. The number of spikelets per panicle is reduced by heat stress during the early reproductive stage but is not affected by heat stress during the mid-late reproductive stage. Spikelet sterility induced by heat stress can be attributed primarily to physiological abnormalities in the reproductive organs during flowering but attributed to structural and morphological abnormalities in reproductive organs during panicle initiation. The lower grain weight caused by heat stress during the early reproductive stage was due to a reduction in non-structural carbohydrates, undeveloped vascular bundles, and a reduction in grain length and width, while a shortened grain filling duration, reduced grain filling rate, and decreased grain width affect grain weight when heat stress occurs during grain filling. Phytohormones play vital roles in regulating plant adaptations against heat stress. We discuss the processes involving phytohormone homeostasis (biosynthesis, catabolism, deactivation, and transport) in response to heat stress. It is currently thought that biosynthesis and transport may be the key processes that determine phytohormone levels and final grain yield in rice under heat stress conditions. Finally, we prospect that screening and breeding rice varieties with comprehensive tolerance to heat stress throughout the entire reproductive phase could be feasible to cope with unpredictable heat events in the future. Studies in phytohormone homeostatic response are needed to further reveal the key processes that determine phytohormone levels under heat condition.

scholarly journals Response of phytohormone homeostasis to heat stress and the roles of phytohormones in rice grain yield: a review

2019 ◽  
Author(s):  
Chao Wu ◽  
She Tang ◽  
Ganghua Li ◽  
Shaohua Wang ◽  
Shah Fahad ◽  
...  
Keyword(s):  
Heat Stress ◽  
Grain Yield ◽  
Grain Filling ◽  
Reproductive Organs ◽  
Reproductive Stage ◽  
Grain Weight ◽  
Rice Grain ◽  
Vascular Bundles ◽  
Rice Varieties ◽  
Heat Effects

Rice is highly susceptible to heat stress at the reproductive stage. In this review, we first summarize recent progress in heat effects on rice grain yield during different reproductive stages. Different responses of yield traits of rice to heat stress during different reproductive stages are identified. The number of spikelets per panicle is reduced by heat stress during the early reproductive stage but is not affected by heat stress during the mid-late reproductive stage. Spikelet sterility induced by heat stress can be attributed primarily to physiological abnormalities in the reproductive organs during flowering but attributed to structural and morphological abnormalities in reproductive organs during panicle initiation. The lower grain weight caused by heat stress during the early reproductive stage was due to a reduction in non-structural carbohydrates, undeveloped vascular bundles, and a reduction in grain length and width, while a shortened grain filling duration, reduced grain filling rate, and decreased grain width affect grain weight when heat stress occurs during grain filling. Phytohormones play vital roles in regulating plant adaptations against heat stress. We discuss the processes involving phytohormone homeostasis (biosynthesis, catabolism, deactivation, and transport) in response to heat stress. It is currently thought that biosynthesis and transport may be the key processes that determine phytohormone levels and final grain yield in rice under heat stress conditions. Finally, we prospect that screening and breeding rice varieties with comprehensive tolerance to heat stress throughout the entire reproductive phase could be feasible to cope with unpredictable heat events in the future. Studies in phytohormone homeostatic response are needed to further reveal the key processes that determine phytohormone levels under heat condition.

scholarly journals Modelling the effects of post-heading heat stress on biomass partitioning, and grain number and weight of wheat

2020 ◽  
Vol 71 (19) ◽  
pp. 6015-6031
Author(s):  
Bing Liu ◽  
Leilei Liu ◽  
Senthold Asseng ◽  
Dongzheng Zhang ◽  
Wei Ma ◽  
...  
Keyword(s):  
Heat Stress ◽  
Grain Yield ◽  
Crop Production ◽  
Grain Filling ◽  
Biomass Partitioning ◽  
Grain Weight ◽  
Growth Stages ◽  
Grain Number ◽  
Good Ability ◽  
Improved Model

Abstract Grain yield of wheat and its components are very sensitive to heat stress at the critical growth stages of anthesis and grain filling. We observed negative impacts of heat stress on biomass partitioning and grain growth in environment-controlled phytotron experiments over 4 years, and we quantified relationships between the stress and grain number and potential grain weight at anthesis and during grain filling using process-based heat stress routines. These relationships included reduced grain set under stress at anthesis and decreased potential grain weight under stress during early grain filling. Biomass partitioning to stems and spikes was modified under heat stress based on a source–sink relationship. The integration of our process-based stress routines into the original WheatGrow model significantly enhanced the predictions of the biomass dynamics of the stems and spikes, the grain yield, and the yield components under heat stress. Compared to the original model, the improved version decreased the simulation errors for grain yield, grain number, and grain weight by 73%, 48%, and 49%, respectively, in an evaluation using independent data under heat stress in the phytotron conditions. When tested with data obtained under field conditions, the improved model showed a good ability to reproduce the decreasing dynamics of grain yield and its components with increasing post-anthesis temperatures. Sensitivity analysis showed that the improved model was able to reproduce the responses to various observed heat-stress treatments. These improvements to the crop model will be of significant importance for assessing the effects on crop production of projected increases in heat-stress events under future climate scenarios.

scholarly journals Grain filling patterns of barley as affected by high temperature stress

2017 ◽  
Vol 15 (2) ◽  
pp. 174-181
Author(s):  
Md Rasel Rana ◽  
Md Masudul Karim ◽  
Md Juiceball Hassan ◽  
Md Alamgir Hossain ◽  
Md Ashraful Haque
Keyword(s):  
Heat Stress ◽  
Grain Yield ◽  
Grain Filling ◽  
High Temperature Stress ◽  
Water Soluble ◽  
Grain Weight ◽  
Soluble Carbohydrates ◽  
Barley Cultivars ◽  
The Mean ◽  
Grain Filling Period

Grain filling determines the grain weight, a major component of grain yield in cereals. Grain filling in barley depends on current assimilation and culm reserves (mainly water-soluble carbohydrates). Nowadays barley is facing heat stress problem which is mostly responsible to reduce the yield of barley. A field experiment was conducted at the Field Lab, Department of Crop Botany, BangladeshAgriculturalUniversity, Mymensingh during November 2015 to March 2016 to study the grain filling patterns and the contributions of culm reserves to grain yield under heat stress. The experiment consisted of two factors—barley cultivars and heat stress. The heat stress was imposed by late sowing. The tillers were sampled once a week during grain filling period to determine the changes in dry weights of different parts, viz., leaves, culm with sheath, spikes, and grains; and to examine the contribution of culm reserves to grain yield. The results in the experiment revealed that the grain yield was reduced by 22-28% due to the stress. The grain yield varied from 52 to 150 g m−2 with the mean of 102 g m−2 under control while it varied from 37 to 116 g m−2 with the mean of 75 g m−2 under heat stress. Among the cultivars studied BARI Barley5, BARI Barley2 and BARI Barley1, seemed as high yielders while BARI Barley3, BARI Barley4, BARI Barley6 as the low yielders under heat stress treatment. The reduction in grain yield was attributable mainly to lighter grain weight due to the stress. Heat stress drastically reduced the grain filling duration by 45–50%. However, the stress increased the grain filling rate by 6–53%. The amount of reserves remobilized to grain varied among the cultivars ranging from 4.8 to 12.77 mg spike−1 in control and from 1.73 to 6.25 mg spike−1 in stressed plants. The stressed barley plants exhibited lower accumulation of reserves in culm but they showed almost its complete remobilization to the grain. The contribution of culm reserves to grain yield varied from 1.13 to 19.52%, and 1.09 to 2.11% in control and in stressed plants, respectively. In conclusion, culm reserve is the important attributes in grain yield in Bangladeshi barley cultivars but the contribution remains almost unaffected due the post-anthesis heat stress.J. Bangladesh Agril. Univ. 15(2): 174-181, December 2017

scholarly journals Estimating the yield stability of heat-tolerant rice genotypes under various heat conditions across reproductive stages: a 5-year case study

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Chao Wu ◽  
Kehui Cui ◽  
Qian Li ◽  
Liuyong Li ◽  
Wencheng Wang ◽  
...  
Keyword(s):  
Heat Stress ◽  
Grain Yield ◽  
Grain Filling ◽  
Yield Stability ◽  
Reproductive Stage ◽  
Rice Cultivars ◽  
Grain Yields ◽  
Rice Genotypes ◽  
Heat Tolerant ◽  
Heat Events

AbstractHeat events during the reproductive stages of rice plants induce great yield losses. Cultivating heat-tolerant varieties is a promising strategy for guaranteeing grain security under global warming scenarios. Most heat-tolerant rice genotypes were identified under heat during the flowering stage, but it is unclear whether these currently screened heat-tolerant rice genotypes maintain stable high grain yields when heat stress occurs during the other reproductive stages. In the present study, two notable heat-tolerant rice cultivars, Nagina22 and Shanyou63, and one typical heat-sensitive cultivar, Liangyoupeijiu, were evaluated for their yield response and yield stability under heat treatments during the panicle initiation, flowering, and grain filling stages during 2010–2014. Our results revealed that rice cultivars respond differently to heat stress during different reproductive stages. Nagina22 was the most tolerant to heat stress during the flowering and grain filling stages but was susceptible during panicle initiation; Shanyou63 was the most tolerant to heat stress during panicle initiation and grain filling and was moderately tolerant to heat stress during the flowering stages. Genotype and genotype-by-environment interaction biplot yield analysis revealed that Shanyou63 exhibited the highest stability in high grain yield, followed by Nagina22, and Liangyoupeijiu exhibited stable low grain yield when experiencing heat stress across the three reproductive stages. Our results indicate that the heat tolerance of different rice cultivars depends on the reproductive stage during which heat stress occurs, and the effects manifest as reductions in grain yields and seed setting rates. Future efforts to develop heat-tolerant varieties should strive to breed varieties that are comprehensively tolerant to heat stress during any reproductive stage to cope with the unpredictable occurrence of future heat events.

scholarly journals Effect of Heat Stress on Inter-relationship of Physiological and Biochemical Traits with Grain Yield in Wheat (Triticum aestivum L.)

2020 ◽  
pp. 19-29
Author(s):  
Amrita Kumari ◽  
R. D. Ranjan ◽  
Chandan Roy ◽  
Awadesh Kumar Pal ◽  
S. Kumar
Keyword(s):  
Heat Stress ◽  
Grain Yield ◽  
Flag Leaf ◽  
Grain Filling ◽  
Triticum Aestivum L ◽  
Seedling Stage ◽  
Biochemical Traits ◽  
Highly Correlated ◽  
Complex Phenomena ◽  
Physiological And Biochemical

Heat stress, particularly the stress appears at the time of flowering to grain filling stages causing severe yield loss in wheat. Heat tolerance is complex phenomena that include adjustment in morphological, physiological and biochemical traits of the crop. Present investigation was carried out to understand the effect of terminal heat stress on different traits of wheat. The experiment was conducted in three dates of sowing as timely sown, late sown and very late sown to expose the crop to heat stress at later stages of the crop growth. Significant genetic variations for all the traits evaluated under three conditions indicated the presence of variability for the traits. Trait association analysis revealed that flag leaf chlorophyll content and MSI at seedling stage; MDA at reproductive stage had direct relationship with grain yield. While under very late sown condition MDA and RWC at seedling stages were found to be highly correlated with grain yield. It indicates that MDA, RWC at seedling stage and days to booting, days to milking plays important role in very late sown condition that can be used as selection criteria in breeding programme.

scholarly journals Evaluation of Spring Wheat Genotypes (Triticum Aestivum L.) for Heat Stress Tolerance Using Different Stress Tolerance Indices

2015 ◽  
Vol 47 (4) ◽  
pp. 49-63 ◽  
Author(s):  
A.A. Khan ◽  
M.R. Kabir
Keyword(s):  
Heat Stress ◽  
Grain Yield ◽  
Stress Tolerance ◽  
Spring Wheat ◽  
Grain Filling ◽  
Filling Rate ◽  
Wheat Genotypes ◽  
Grain Filling Rate ◽  
Heat Stress Tolerance ◽  
Late Sowing

Abstract Twenty five spring wheat genotypes were evaluated for terminal heat stress tolerance in field environments in the Agro Ecological Zone-11 of Bangladesh, during 2009-2010 cropping season. The experiments were conducted at Wheat Research Centre, Bangladesh Agricultural Research Institute, using randomized block design with three replicates under non-stress (optimum sowing) and stress (late sowing) conditions. Seven selection indices for stress tolerance including mean productivity (MP), geometric mean productivity (GMP), tolerance (TOL), yield index (YI), yield stability index (YSI), stress tolerance index (STI) and stress susceptibility index (SSI) were calculated based on grain yield of wheat under optimum and late sowing conditions. The results revealed significant variations due to genotypes for all characters in two sowing conditions. Principal component analysis revealed that the first PCA explained 0.64 of the variation with MP, GMP, YI and STI. Using MP, GMP, YI and STI, the genotypes G-05 and G-22 were found to be the best genotypes with relatively high yield and suitable for both optimum and late heat stressed conditions. The indices SSI, YSI and TOL could be useful parameters in discriminating the tolerant genotypes (G-12, G-13, and G-14) that might be recommended for heat stressed conditions. It is also concluded from the present studies that biomass, grain filling rate and spikes number m-2 are suitable for selecting the best genotypes under optimum and late sowing conditions because these parameters are highly correlated with MP, GMP, YI and STI. However, high ground cover with long pre heading stage and having high grain filling rate would made a genotype tolerant to late heat to attain a high grain yield in wheat.

scholarly journals Effect of two‐week heat stress during grain filling on stem reserves, senescence, and grain yield of European winter wheat cultivars

2020 ◽  
Vol 206 (6) ◽  
pp. 722-733 ◽  
Author(s):  
Siegfried Schittenhelm ◽  
Tina Langkamp‐Wedde ◽  
Martin Kraft ◽  
Lorenz Kottmann ◽  
Katja Matschiner
Keyword(s):  
Heat Stress ◽  
Winter Wheat ◽  
Grain Yield ◽  
Grain Filling ◽  
Wheat Cultivars ◽  
Winter Wheat Cultivars ◽  
European Winter Wheat ◽  
Stem Reserves

Evaluation of cellular thermotolerance and associated heat tolerance in wheat (Triticum aestivum L.) under late sown condition

2015 ◽  
Vol 49 (6) ◽  
Author(s):  
Chubasenla Aochen ◽  
Pravin Prakash
Keyword(s):  
Heat Stress ◽  
Grain Filling ◽  
Grain Weight ◽  
Growth Stages ◽  
Wheat Genotypes ◽  
Grain Filling Rate ◽  
Grain Filling Duration ◽  
Membrane Thermostability ◽  
Heat Susceptibility Index ◽  
1000 Grain Weight

Fifty wheat genotypes were evaluated at the seedling stage of growth, for genetic variation in cellular thermotolerance by cell membrane thermostability (CMS) and Triphenyl tetrazolium choride (TTC) assays. A subset of eight genotypes was also evaluated at the anthesis stage using the same assays. Large and significant differences existed among wheat genotypes for TTC and CMS at the seedling and anthesis stages. Average thermotolerance declined from seedling to anthesis stage. Thermotolerance was well-correlated between growth stages among the eight genotypes for both CMS (r=0.95; p= 0.01) and TTC (r=0.92; p= 0.01). The correlation between TTC and CMS among the eight genotypes at seedling and anthesis stages was significant (r=0.95; p=0.01 and r =0.93; p= 0.01, respectively). The effect of heat stress on wheat genotypes selected on the basis of TTC and CMS thermotolerance ratings were evaluated. 1000-grain weight, grain filling duration (GFD) and grain filling rate (GFR) reduced under heat stress. The heat susceptibility index (S) revealed K-65 and Yangmai6 to be susceptible and NW-1014 and DBW-14 to be moderately tolerant to heat stress. GFR and 1000-grain weight were found to have highly significant positive correlation with CMS and TTC ratings at both seedling and anthesis stages.

Control of Grain Yield by Sink Capacity and Assimilate Supply in Various Rice (Oryza sativa) cultivars

1991 ◽  
Vol 27 (2) ◽  
pp. 127-135 ◽  
Author(s):  
S. Fukai ◽  
L. Li ◽  
P. T. Vizmonte ◽  
K. S. Fischer
Keyword(s):  
Oryza Sativa ◽  
Grain Yield ◽  
Grain Filling ◽  
Grain Weight ◽  
Rice Cultivars ◽  
Sink Capacity ◽  
Single Grain ◽  
Grain Filling Period

SummaryThe objective of this study was to identify whether grain yield in four contrasting rice cultivars is limited by supply of assimilate to fill the grains or by sink capacity to accept the assimilate. Grain yield was limited mostly by sink capacity, with little variation in single grain weight among cultivars, but an old cultivar showed some ability to adjust single grain weight. Sink capacity was very sensitive to variation in assimilate supply immediately after anthesis. Reduction in assimilate supply in the anthesis to early grain filling period reduced filled grain percentage and grain yield, particularly in high yielding cultivars with a large number of grains per panicle.

Sign in / Sign up

Export Citation Format

Share Document