scholarly journals STABILITY EFFECTS OF CUBE ARMOR UNIT PLACEMENT CONFIGURATIONS IN THE BERM OF A BREAKWATER

Author(s):  
Yalcin Yüksel ◽  
Esin Çevik ◽  
Marcel Van Gent ◽  
C. Sahin ◽  
Müge Gülver Gültekin ◽  
...  

For the sake of overtopping, stability and economy, rubble mound breakwaters have been built with a berm in the seaward slope. Here, a breakwater model with cube armour units in the lower slope and a horizontal berm, and rock in the upper slope was tested experimentally. The purpose of the study was to investigate the stability of berms for two different configurations of the transition of armor units from the lower slope to the berm. Based on the test results, an effective configuration of cube units at the transition has been obtained.

2012 ◽  
Vol 1 (33) ◽  
pp. 10
Author(s):  
Marcel Van Gent ◽  
Gregory M. Smith ◽  
Ivo Van der Werf

The stability of rock slopes with a horizontal berm has been studied by means of physical model tests. This paper is focussed on the rock slope stability of the slopes above and below the berm. By applying a berm the rock size can be reduced compared to the required rock size for a straight slope without a berm. This reduction can be significant for the slope above the berm. The influence of the slope angle (1:2 and 1:4), the width of the berm, the level of the berm, and the wave steepness have been investigated. Based on the test results prediction formulae have been derived to quantify the required rock size for rubble mound breakwaters with a berm.


Author(s):  
Yalcin Yuksel ◽  
Marcel van Gent ◽  
Esin Cevik ◽  
H. Alper Kaya ◽  
Irem Gumuscu ◽  
...  

The stability number for rubble mound breakwaters is a function of several parameters and depends on unit shape, placing method, slope angle, relative density, etc. In this study two different densities for cubes in breakwater armour layers were tested to determine the influence of the density on the stability. The experimental results show that the stability of high density blocks were found to be more stable and the damage initiation for high density blocks started at higher stability numbers compared to normal density cubes.


2011 ◽  
Vol 1 (8) ◽  
pp. 26
Author(s):  
Anton Brandtzaeg

In the improvement of design criteria for the layer of cover blocks on rubble mound breakwaters important advance has been made in recent years (l), (2), (3). Still, some points seem to require further study, among them the effect of the specific weights of block material and fluid on the stability of the cover. In this respect the magnitude of the fluid accelerations involved, of which little information is available may be of some importance. For evaluation of the acceleratic as well as for other purposes, a roughly approximate mathematic description of the motion of the water rushing up and down the breakwater front may be of some use. This motion certainly is neither steady nor uniform. Visual and photographic observation through the glass panel a wave channel seems to indicate, however, that unsteadiness the more important characteristic of the motion during the up and downrush proper. It seems reasonable, therefore, to att€ a first approximation to a description of the motion by neglecting, to a certain extent, its non-uniformity. Necessarily, the same time also the requirement of continuity must be partly disregarded. In the following a mathematical model based on this point of view is presented for consideration. It is believed that by means of this model values of displacements, velocity and accelerations can be calculated, which may reasonably be considered as useful, although quite rough, approximations t< the actual values. For a few particular cases, experimental evidence is reported. The model has reference only to the up- and downrush proper, that is, to the motion of the water above some limit level, at or somewhat below the Still Water Line (referred t< hereafter as the StflL). The motion below this level, where tl downrush meets the oncoming next wave, could hardly be conee of as being uniform.


1966 ◽  
Vol 1 (10) ◽  
pp. 50 ◽  
Author(s):  
E.M. Merrifield ◽  
J.A. Zwamborn

The Dolos, a new type of armour unit which closely resembles a normal ship's anchor, was developed and tried out under field conditions on the main breakwater of East London harbour. Since these full-scale Dolosse proved very successful, tests were made in a wave channel to compare the stability of Dolosse with other known types of armour blocks. The test results showed that the Dolos is outstandingly stable, and since manufacture and random placing of Dolosse offers no particular difficulties it is concluded that in many cases the use of Dolosse in armour layers may lead to more economical solutions for rubble mound breakwater and shore protection works.


2012 ◽  
pp. 1499-1506
Author(s):  
Gregorio Iglesias Rodriguez ◽  
Alberte Castro Ponte ◽  
Rodrigo Carballo Sanchez ◽  
Miguel Ángel Losada Rodriguez

Breakwaters are coastal structures constructed to shelter a harbour basin from waves. There are two main types: rubble-mound breakwaters, consisting of various layers of stones or concrete pieces of different sizes (weights), making up a porous mound; and vertical breakwaters, impermeable and monolythic, habitually composed of concrete caissons. This article deals with rubble-mound breakwaters. A typical rubble-mound breakwater consists of an armour layer, a filter layer and a core. For the breakwater to be stable, the armour layer units (stones or concrete pieces) must not be removed by wave action. Stability is basically achieved by weight. Certain types of concrete pieces are capable of achieving a high degree of interlocking, which contributes to stability by impeding the removal of a single unit. The forces that an armour unit must withstand under wave action depend on the hydrodynamics on the breakwater slope, which are extremely complex due to wave breaking and the porous nature of the structure. A detailed description of the flow has not been achieved until now, and it is unclear whether it will be in the future in view of the turbulent phenomena involved. Therefore the instantaneous force exerted on an armour unit is not, at least for the time being, amenable to determination by means of a numerical model of the flow. For this reason, empirical formulations are used in rubble-mound design, calibrated on the basis of laboratory tests of model structures. However, these formulations cannot take into account all the aspects affecting the stability, mainly because the inherent complexity of the problem does not lend itself to a simple treatment. Consequently the empirical formulations are used as a predesign tool, and physical model tests in a wave flume of the particular design in question under the pertinent sea climate conditions are de rigueur, except for minor structures. The physical model tests naturally integrate all the complexity of the problem. Their drawback lies in that they are expensive and time consuming. In this article, Artificial Neural Networks are trained and tested with the results of stability tests carried out on a model breakwater. They are shown to reproduce very closely the behaviour of the physical model in the wave flume. Thus an ANN model, if trained and tested with sufficient data, may be used in lieu of the physical model tests. A virtual laboratory of this kind will save time and money with respect to the conventional procedure.


Author(s):  
Marcel R.A. van Gent ◽  
Gregory M. Smith ◽  
Ivo M. van der Werf

1984 ◽  
Vol 1 (19) ◽  
pp. 175
Author(s):  
Alex C. Thompson ◽  
Hans F. Burcharth

As part of a program to study the hydraulics of wave attack on rubble mound breakwaters tests were made on model armour units in a steady flow through a layer laid on a slope. The flow angle has little effect on stability for dolosse or rock layers. The head drop at failure across each type of layer is similar but the dolosse layer is more permeable and fails as a whole. There was no viscous scale effect. These results and earlier tests in oscillating flow suggest a 'reservoir' effect is important in the stability in steep waves.


1966 ◽  
Vol 1 (10) ◽  
pp. 57 ◽  
Author(s):  
Anton Brandtzaeg

To study the effect of the specific weights of armour block material and fluid on the stability of rubble mound breakwaters a total of 110 model tests were made, with varying specific weights of armour and fluid, sizes of blocks and slopes of the breakwater face. The tests indicate that in cases where the specific weights deviate much from usual values, the current design formula (Eq. (1)) should be modified by entering a variable quantity,


2019 ◽  
Vol 7 (9) ◽  
pp. 312 ◽  
Author(s):  
Xianglong Wei ◽  
Huaixiang Liu ◽  
Xiaojian She ◽  
Yongjun Lu ◽  
Xingnian Liu ◽  
...  

The stability number of a breakwater can determine the armor unit’s weight, which is an important parameter in the breakwater design process. In this paper, a novel and simple machine learning approach is proposed to evaluate the stability of rubble-mound breakwaters by using Extreme Learning Machine (ELM) models. The data-driven stability assessment models were built based on a small size of training samples with a simple establishment procedure. By comparing them with other approaches, the simulation results showed that the proposed models had good assessment performances. The least user intervention and the good generalization ability could be seen as the advantages of using the stability assessment models.


Sign in / Sign up

Export Citation Format

Share Document