Cranio-Mandibular Disorders after Whiplash Injury: A Mono-Institutional Clinical Study on 31 Patients

Background: Whiplash is a consequence of traumatic injuries, mostly related to road accidents, with variable clinical manifestations, also known as Whiplash Associated Disorders, such as neck, head and temporo-cranio-mandibular pain. Methods: The current study aims to evaluate the onset and evolution of temporomandibular joint pain in people with whiplash in a study group treated with the use of Zimmer Collars (adjustable rigid cervical collars for neck immobilization), as compared to a control group. This prospective study included 31 patients followed by the Dental Prosthesis Department of the University of Bari “Aldo Moro”: 20 patients with whiplash (age range: 20–39 years) treated with Zimmer collars and 11 patients with whiplash (age range: 20–33 years) who were not. Immediately after the whiplash occurred, a visual analogue scale (VAS) was used to describe the intensity of pain and to complete the chart of the European Academy of Craniomandibular Disorders. Five out of twenty patients, already treated with a Zimmer collar, wore an occlusal splint as well because of persistent pain reported at the 28-day and 60-day follow-up and were supported by pharmacological therapy with analgesics (paracetamol) and muscle relaxants (thiocolchicoside). Results: During the last follow-up (at six months), three out of five patients displayed a residual VAS score of 3, 4, and 5, respectively, while the remaining two displayed a VAS of 0. In the control group, four out of eleven patients needed to wear an occlusal splint but without muscle relaxants and analgesics pharmacological therapy; these four corresponded to the patients showing a residual painful symptomatology, with VAS reaching value of 2, and also were the oldest patients of the group. Data regarding VAS values and Zimmer collar use, both at the first visit and six months later, were statistically analyzed. Conclusion: Our prospective study highlights how whiplash-associated acute disorders are often self-limiting over a period of few months, thus reducing the possibility of symptom chronicity; the latter seems to be strictly related to lesion severity, pre-existence of a craniomandibular dysfunction and patient age, but appears to be independent from Zimmer collar use, as statistically confirmed.

Case Report: Digital analysis of occlusion with T-Scan Novus in occlusal splint treatment for a patient with bruxism

Bruxism is a disease with a multifactorial etiology. Its clinical manifestations are most often an unaesthetic smile with abraded tooth surfaces, temporomandibular disorders and muscle hyperactivity. Here we present a case of bruxism where proper articulation of the occlusal splint was performed using the T-scan Novus system. A patient with bruxism underwent treatment with stabilization splint made by 3D printer technology. Intraoral scanning was performed using Trios Color (3Shape, 2014), and the digital design was achieved using the 3Shape Dental system design - splint studio. Formlabs Form 2 printer with biocompatible resin Dental LT Clear Resin was used for printing. The T-Scan Novus system with software attached to it, version 9.1, was used for digital examination of the occlusion. A 2.7 mm thick occlusal splint was developed, and the software adapted the occlusion with antagonists. After adjustment with T-Scan Novus, a reduction in disocclusion time of the patient was achieved, which is a desired result in the treatment of bruxism. The position of the joint components was proven radiologically. The treatment of bruxism with splint therapy continues to be the main method of treatment. Using digital technology allows for more accurate constructions and precise balancing of occlusal relationships.

Biomechanical Behavior Evaluation of a Novel Hybrid Occlusal Splint-Mouthguard for Contact Sports: 3D-FEA

Background: Orofacial injuries are common occurrences during contact sports activities. However, there is an absence of data regarding the performance of hybrid occlusal splint mouthguards (HMG), especially during compressive loading. This study amid to evaluate the biomechanical effects of wearing a conventional custom mouthguard (MG) or the HMG on the teeth, bone, and the device itself. Methods: To evaluate the total deformation and stress concentration, a skull model was selected and duplicated to receive two different designs of mouthguard device: one model received a MG with 4-mm thickness and the other received a novel HMG with the same thickness. Both models were subdivided into finite elements. The frictionless contacts were used, and a nonlinear analysis was performed simulating the compressive loading in occlusion. Results: The results were presented in von-Mises stress maps (MPa) and total deformation (mm). A higher stress concentration in teeth was observed for the model with the conventional MG, while the HMG design displayed a promising mechanical response with lower stress magnitude. The HMG design displayed a higher magnitude of stress on its occlusal portion (7.05 MPa) than the MG design (6.19 MPa). Conclusion: The hybrid mouthguard (HMG) reduced (1) jaw displacement during chewing and (2) the generated stresses in maxillary and mandibular teeth.

Software Details in Occlusal Splint Creation through 3Shape Design Studio

Introduction: Occlusal splints are usually the first choice in the treatment of bruxism. Splints can also be the only treatment or can be ended with adhesive restoration, orthodontic or prosthetic treatment. Methods: This article demonstrates the steps of a digital workflow through the 3Shape Design system - splint studio. The initial units are virtual models, scanned by Trios Color Scanner (3Shape). Results: The digital protocol includes eight steps that allow precise and detailed creation of the searched object. Each step is described from the perspective of a clinician, prosthetist and orthodontist, not a dental technician. Possible complications and ways to management with them are described. Conclusion: Digital protocol of occlusal splint creation gives many opportunities according to design, thickness and occlusion.

Biomechanical Behavior Evaluation of a Novel Hybrid Occlusal Splint-mouthguard for Contact Sports: 3D-FEA

Orofacial injuries are common occurrences during contact sports activities; however, there is an absence of data regarding the performance of hybrid occlusal splint mouthguards, especially during compressive loading. To evaluate the total deformation and stress concentration, a skull model was selected and duplicated to receive two different designs of mouthguard devices: one model received a conventional custom-made mouthguard (MG) with 4-mm thickness and the other received a novel hybrid occlusal splint-mouthguard (HMG) with the same thickness. Both models were subdivided into finite elements. The frictionless contacts were used, and a nonlinear analysis was performed simulating the compressive loading in occlusion. The results were presented in von-Mises stress maps (MPa) and Total Deformation (mm). A higher stress concentration in teeth was observed for the model with the conventional MG, while the HMG design displayed a promising mechanical response with lower stress magnitude. The HMG de-sign displayed a higher magnitude of stress on its occlusal portion than the MG design. The hybrid mouthguard (HMG) reduced (1) jaw displacement during chewing and (2) the generated stresses in maxil-lary and mandibular teeth.

Occlusal Splints and Exercise Performance: A Systematic Review of Current Evidence

The role of the dento-mandibular apparatus and, in particular, occlusion and jaw position, received increased attention during last years. In the present study, we aimed to systematically review, on the light of the new potential insights, the published literature covering the occlusal splint (OS) applications, and its impact on exercise performance. A structured search was carried out including MEDLINE®/PubMed and Scopus databases with additional integration from external sources, between March and June 2021. To meet the inclusion criteria, studies published in the English language, involving humans in vivo, published from 2000 to 2021 and that investigated the role of occlusal splints on athletes’ performance were selected. Starting from the 587 identified records, 17 items were finally included for the review. Four main aspects were considered and analyzed: (1) occlusal splint characteristics and occlusion experimental conditions, (2) jump performance, (3) maximal and explosive strength, and (4) exercise technique and biomechanics. The results of the systematic literature analysis depicted a wide heterogenicity in the experimental conditions and suggested the application of the OS as a way to improve athletes’ or individuals’ oral health, and as a potential tool to optimize marginal aspects of exercise performance.

Case Report: Digital analysis of occlusion with T-Scan Novus in occlusal splint treatment for a patient with bruxism

Bruxism is a disease with a multifactorial etiology. Its clinical manifestations are most often an unaesthetic smile with abraded tooth surfaces, temporomandibular disorders and muscle hyperactivity. Here we present a case of bruxism where proper articulation of the occlusal splint was performed using the T-scan Novus system. A patient with bruxism underwent treatment with stabilization splint made by 3D printer technology. Intraoral scanning was performed using Trios Color (3Shape), and the digital design was achieved using the 3Shape Dental system design - splint studio. Formlabs Form 2 printer with biocompatible resin Dental LT Clear Resin was used for printing. The T-Scan Novus system with software attached to it, version 9.1, was used for digital examination of the occlusion. A 2.7 mm thick occlusal splint was developed, and the software adapted the occlusion with antagonists. After adjustment with T-Scan Novus, a reduction in disocclusion time of the patient was achieved, which is a desired result in the treatment of bruxism. The position of the joint components was proven radiologically. The treatment of bruxism with splint therapy continues to be the main method of treatment. Using digital technology allows for more accurate constructions and precise balancing of occlusal relationships.

Pain Assessment during Gnathological Treatment of Temporomandibular Myofascial Pain through Mandibular Repositioning Splints Designed after a Posture-Stabilometric Evaluation

The aim of the study is to evaluate the effectiveness of two complementary mandibular repositioning splints (SVED and MORA) designed after a preliminary patients’ posture-stabilometric evaluation in treatment for temporomandibular myofascial pain (TMP) using the Pain-Intensity Numeric Rating Scale (PI-NRS) assessment. Eighty-six consecutive sportive non-agonistic subjects with TMP were randomly divided in two groups. Forty-two wear mandibular repositioning splints designed by a posture-stabilometric evaluation, thus constituting the test group. The other 44 subjects were not subjected to any treatment, thus represented the control group. To record pain intensity, subjects in both groups were asked to fill in a PI-NRS which ranged from 0 (no pain) to 10 (worst imaginable pain). In the test group, PI-NRS was assessed three times: before starting therapy (t0), after 4 months (t1) and after 8 months (t2) of treatment. Instead, in the control group PI-NRS was recorded during the first visit (t0) and after 8 months (t2). The Friedman test showed a statistically significant decrease in PI-NRS mean scores after 4 (t1) and 8 (t2) months from the start of the gnathological therapy with mandibular repositioning splints, (p < 0.001) in test group. There is enough evidence to assess that occlusal splint therapy for mandibular repositioning (MORA and SVED) designed through a posture-stabilometric evaluation could be considered in the treatment of temporomandibular myofascial pain.