Fully Graph Sensitivity Solution of the Switched Circuits by Two-graph

The most general parameter of the electronic circuit is its sensitivity. Sensitivity analysis helps circuit designers to determine boundaries to predict the variations that a particular design variable will generate in a target specifications, if it differs from what is previously assumed. There are two basic methods for calculating the sensitivity: matrix methods and graph methods. The method described in this article is based on a graph, that contains separate input ad output nodes for each phase. This makes it possible to determine the transmission sensitivity even between partial switching phases. The described fully-graph method is suitable for switched current circuits and switched capacitors circuits, too

Development of a model of subjective feelings for the front visual quality during automobile driving

The main goal of this study is to develop a model of subjective feelings for frontal visibility, often called the feeling of ‘openness’, for automobile drivers. Moreover, this study proposed a method to overcome the limitations of the rating scale method, although it has been used in a great number of studies. To this end, eight potential design variables of automobiles were extracted from 25 candidate design variables. A questionnaire for evaluating the openness of an automobile was developed based on these variables. By using this questionnaire, a user experiment was conducted to investigate a relationship between the feeling of openness of automobiles and the design variables. Twenty-six participants evaluated the feeling of openness and the perceived rate of the design variables for 30 automobiles. The results showed that the variables such as the height of headlining, the height of cluster housing, the inclination angle of wind shield, and the volume of A-pillar were the critical design variables affecting the feeling of openness of the automobiles. Moreover, the optimal perceived level of each design variable was found out. The results of this study can be applied to designing automobile interior for good frontal visibility.

The Role of Geometry on a Self-Sustaining Bio-Receptive Concrete Panel for Facade Application

Bio-receptivity refers to the aptitude of a material to allow for the natural growth of small plant species on stony surfaces with minimum external influence. Despite the numerous associated environmental benefits, the growth of mosses and lichens on facades has always been viewed as a negative phenomenon due to the random and shabby growth conditions. This research dealt with the design of a self-sustaining bio-receptive concrete facade system with an aim to create a more sustainable and green concrete for the construction industry. The research used surface geometry as a design variable to facilitate moss growth on concrete panels in an ordered and systematic manner. The exercise was an attempt to not only address the functional aspect of bio-receptivity but also its aesthetical quality, which has a primary influence on people’s perception of bio-receptivity and can promote mass use of this type of concrete material. The research was conducted in a top-down approach, where first, through design by research, six distinctly designed concrete panels were fabricated using adapted material composition (blast furnace cement with 75% slag, 0.6 water/cement, sand 0–4 mm and gravel 5–8 mm) as the boundary condition. The concrete mixture together with no curing policy resulted in highly porous concrete panels, suitable for bio-receptive properties. Next in the design validation phase, the influence of surface geometry/roughness on the water retention ability of the panels and the subsequent moss growth on the panels were evaluated through in vitro experiments. The water retention experiment of the panels was based on quantitative measurements for weight, relative humidity and temperature at several time intervals. The moss-growing experiment was carried out within an ideal greenhouse condition where the panels were initially inoculated with moss spores; the results were based on qualitative observation for a period of 4 months. According to the comparative analysis of these results, with the same material composition, Panel 2 showed the highest bio-colonization owing to its prominent surface geometry, whereas Panel 5 showed the least bio-colonization owing to its plain surface despite high absorption capacity. Thus, the role of geometry has been extensively proven in this research and as an outcome a set of general design guidelines have been formulated for a self-sustaining bio-receptive concrete facade panel, using geometry as a design variable for bio-receptivity.

The Correlation Between Phonological Knowledge and Pronunciation Ability

The purpose of this research is to know whether there is a significant correlation between phonological knowledge and pronunciation ability. The method used in this research is correlation design. Variable X is the students’ phonological knowledge and variable Y is students’ pronunciation ability. Population of this research is all of the fourth semester students. There are 80 students as population and the writer took 20 students as the sample. The data are analyzed using Pearson Product Moment formula to know whether there is a correlation between phonological knowledge and pronunciation ability of the students. The result showed there is a correlation between phonological knowledge and pronunciation ability of the students. Based on the calculation that is obtained, rxy value from variable X and Y is 0,223. It is categorized as a low correlation. Whereas the result of the calculation use tcount formula. The tcount value is 1,002. It means that there is no a significant correlation between X and Y variable.

Optimum design of composite structures with ply drop-offs using response surface methodology

Purpose Many studies only take into account the ply stacking sequence as the design variable to determine the optimal ply drop-off location; however, it is necessary to optimize other parameters that have a direct influence on the ply drop-off site such as which plies should be dropped and in which longitudinal direction. That way, the purpose of this study is to find the most significant design variables relative to the drop-off location considering the transversal and longitudinal positions, seeking to achieve the optimal combination of ply drop-off locations that provides excellent performance for the laminate plate. Design/methodology/approach This study aims to determine the optimal drop-off location in a laminate plate using the finite element method and an approach statistical with design of experiments (DOE). Findings The optimization strategy using DOE revealed to be satisfactory for analyzing laminate structures with ply drop-offs, demonstrating that not all design factors influence the response variability. The failure criterion response variable revealed a poor fit, with an adjusted coefficient of determination lower than 60%, thus demonstrating that the response did not vary with the ply drop-off location. Already the strain and natural frequency response variables presented high significance. Finally, the optimization strategy revealed that the optimal drop-off location that minimizes the strain and maximizes the natural frequency is the ply drop-off located of the end plate. Originality/value It was also noted that many researchers prefer evolutionary algorithms for optimizing composite structures with ply drop-offs, being scarce to the literature studies involving optimization strategies using response surface methodology. In addition, many studies only take into account the ply stacking sequence as the design variable to determine the optimal ply drop-off location; however, in this study, the authors investigated other important parameters that have direct influence on the ply drop-off site such as which plies should be dropped and in which longitudinal direction.

Should Colour be Considered as a Significant Design Variable in Foot Orthoses Prescription Writing?

Colours act as stimuli capable of inducing physiological and psychological responses, impacting on human life by influencing behaviour, cognition and emotion. Designers frequently draw upon colour association cues in designing products, packaging and marketing materials to exploit the reported human reactions to them. To date, clinicians and foot orthoses manufacturers appear to have given little thought to how the colour of foot orthoses may have impact within the broader context of a biopsychosocial model of healthcare. Here we examine research regarding colour perception and association and provide rationale for how the use of colour in foot orthoses therapy might be better exploited to improve patient outcomes and to form a focus for future research.