In vitro Regeneration of Japanese Burdock (Arctium lappa L.) from Cotyledon and Leaf Derived Explants

Considering the vegetable and medicinal values, a micropropagation protocol has been established for Japanese Burdock (Arctium lappa L.) by culturing the explants of cotyledon and leaf obtained from in vitro grown seedlings. Direct shoot regeneration was achieved from cotyledon and leaf explants on MS fortified with 4.0 μM BAP and 2.0 μM IBA or NAA after 5 weeks of culture. In addition, both the explants also formed callus from their cut margins within 6 weeks of cultivation on medium complemented with 6.0 μM BAP and 4.0 μM IBA or NAA. Adventitious shoots were also redeveloped through indirect organogenesis from the cotyledon and leaf-derived callus within 10 weeks of culture on MS containing 4.0 μM BAP and 2.0 μM IBA or NAA. The highest rate of shoot reproduction was attained at the third subculture, and more than 12.6 shoots were formed per callus clump. Within 4 weeks of transfer to the rooting medium on MS containing 6.0 μM IBA, the cultured micro-shoots produced highest 5.3 roots per cultured shoot. Rooted plantlets were successfully established on a soil-composed-sand mixture under natural condition with 93.3% survival rate Plant Tissue Cult. & Biotech. 31(2): 123-134, 2021 (December)

BA and TDZ in the Morphogenesis in Vitro of Passiflora Setacea

Passiflora setacea DC (Passifloraceae) is considered an important species in the genetic breeding of passion fruit. However, its use is limited due to low seed germination. This paper aimed to study the effect of cytokinins 6-benzyladenine (BA) and thidiazuron (TDZ) on the in vitro morphogenesis of P. setacea using three explants: hypocotyl, nodal segment, and root segment. The explants were induced to morphogenesis in MS medium modified and with different concentrations of BA and TDZ. After 55 days, the percentage of calluses and shoots were evaluated, and anatomical characterization was performed. The three explants used in the in vitro morphogenesis of P. setacea showed callus and shoots formation, but in greater numbers in the nodal segments treated with BA. TDZ isolated affected equal to or less than BA on callus and shoots formation for the three explants. Direct and indirect organogenesis was observed in the three types of explants. From the results obtained for plant regeneration via in vitro morphogenesis of P. setacea, it is recommended to use a nodal segment in MSM medium and supplemented with 2.22 μmol L-1 of BA.

A fast and effective protocol for obtaining genetically diverse stevia (Stevia rebaudiana Bertoni) regenerants through indirect organogenesis

Plant regeneration through indirect organogenesis allows obtaining genetic variability that can be used in the creation of new cultivars. The study presents a fast and effective protocol of one-step preparation of stevia (Stevia rebaudiana Bertoni) regenerants. To obtain callus tissue and shoot regeneration, leaves and nodal segments were used as primary explants, which were placed on MS (Murashige and Skoog) medium supplemented with plant growth regulators (PGRs): NAA (1-naphthaleneacetic acid – 2.0 mg·dm–3, BA (6-benzylaminopurine – 4.0 mg·dm–3), 2,4‑D (2,4-dichlorophenoxyacetic – 2.0 mg·dm–3). Callus tissue was formed on both types of explants, however, only those derived from nodal segments were proliferating. An average of 3.92 shoots per explant were obtained from leaf explants on the applied medium after 6 weeks of culture. The analysis of the morphogenetic capacity of the obtained regenerants was carried out on MS medium supplemented with PGRs – kinetin (0.25 mg·dm–3), BA (0.5 mg·dm–3). The evaluation of the mean number of shoots, mean shoot length (cm), and the mean number of nodes per shoot indicated phenotypic variability of regenerants. The use of RAPD (randomly amplified polymorphic DNA) markers confirmed the differences also at the DNA level. The proposed one-step indirect organogenesis regeneration protocol induced somaclonal variation of Stevia rebaudiana Bertoni and the obtained regenerants, after selection, could be used in the breeding of this species.

In Vitro Regeneration of Miscanthus x giganteus through Indirect Organogenesis: Effect of Explant Type and Growth Regulators

Miscanthus x giganteus is a spontaneous sterile hybrid therefore the creation of useful genetic diversity by conventional breeding methods is restricted. Plant regeneration through indirect organogenesis may be a useful approach to create genetic variability of this important agricultural crop. The present study aimed to evaluate the effect of the explant type and growth regulators on indirect organogenesis of Miscanthus x giganteus and to determine the ploidy level of plant regenerants by flow cytometry. On average, the highest percentage of morphogenic callus tested explants formed in the medium supplemented with 2.5 mg L–1 IBA + 0.1 mg L–1 BAP + 4.0 mg L–1 l-proline. The most intensive secondary differentiation of callus cells was observed in the medium supplemented with 4.0 mg L–1 ZEA + 1.0 mg L–1 NAA. The highest root formation frequency with the highest number of roots was determined in the MS nutrient medium supplemented with 0.4 mg L–1 IBA, where more than 95% of plant regenerants survived and were growing normally.

Transcriptomic Changes in Internode Explants of Stinging Nettle during Callogenesis

Callogenesis, the process during which explants derived from differentiated plant tissues are subjected to a trans-differentiation step characterized by the proliferation of a mass of cells, is fundamental to indirect organogenesis and the establishment of cell suspension cultures. Therefore, understanding how callogenesis takes place is helpful to plant tissue culture, as well as to plant biotechnology and bioprocess engineering. The common herbaceous plant stinging nettle (Urtica dioica L.) is a species producing cellulosic fibres (the bast fibres) and a whole array of phytochemicals for pharmacological, nutraceutical and cosmeceutical use. Thus, it is of interest as a potential multi-purpose plant. In this study, callogenesis in internode explants of a nettle fibre clone (clone 13) was studied using RNA-Seq to understand which gene ontologies predominate at different time points. Callogenesis was induced with the plant growth regulators α-napthaleneacetic acid (NAA) and 6-benzyl aminopurine (BAP) after having determined their optimal concentrations. The process was studied over a period of 34 days, a time point at which a well-visible callus mass developed on the explants. The bioinformatic analysis of the transcriptomic dataset revealed specific gene ontologies characterizing each of the four time points investigated (0, 1, 10 and 34 days). The results show that, while the advanced stage of callogenesis is characterized by the iron deficiency response triggered by the high levels of reactive oxygen species accumulated by the proliferating cell mass, the intermediate and early phases are dominated by ontologies related to the immune response and cell wall loosening, respectively.

Expression pattern of in vitro organogenesis-associated genes as transcriptional marker in Indian Sandalwood (Santalum album L.).

Indian sandalwood (Santalum album L.) is an expensive wood that requires reproducible method for mass propagation to ensure consistent production and sustainable use of sandalwood. For mass propagation of sandalwood, plant organogenesis requires different combinations of the tissue culture medium. The media is composed of exogenous phytohormones which decides the explant's morphological stages such as shooting or rooting induction. Early prediction of morphological stage from explant can potentially help in selecting the exogenous phytohormones combinations thereby saving time and resources for mass sandalwood propogation. An efficient protocol for the direct and indirect organogenesis (up to shooting development phase) of sandalwood were developed using Woody Plant Media (WPM). WPM supplemented with various concentrations of 6-Bezylaminopurine (BAP) and 1-Naphthaleneacetic acid (NAA) were tested for direct organogenesis, while different treatments consisting of various levels of 2,4-dichlorophenoxyacetic acid (2,4-D), NAA, BAP, Adenine sulphate (ADS), glycine and potassium nitrate were tested for indirect organogenesis. Three stages of leaf development were selected viz., the leaf just after inoculation in WPM media, initial stage of callus formation from leaf and shoot formation for expression pattern analysis. The targeted genes were Alternative oxidase (ao), Late embryogenesis abundant (lea), Cytochrome P450 (cyt-p450), ABC transporter (abct), and Serine-threonine phosphatase (stp) which are associated with in vitro organogenesis. The expression patterns were evaluated to identify a transcription marker. During the initial stages of organogenesis, ao, cyt-p450 and abct showed no/little change in expression in the direct pathway but up-regulation of ao and abct and downregulation of cyt-p450 were observed in the indirect pathway. Expression of lea was increased up to 70-fold during direct and dropped to half during indirect organogenesis.

Induction of Apple Cucumber (Cucumis melo) Buds Development by Combination of Kinetin and IAA In B5 (Gamborg) Medium

Research on indirect organogenesis of apple cucumber (Cucumis sp.) Was conducted from June until August 2020. The aim of the study is to get the best results from IAA and Kinetin concentrations on the growth of buds organogenesis to apple cucumber plants (Cucumis sp.) in B5 Gamborg Medium. The method used was an experimental method with nonparametric statistics with 25 treatments that were repeated 5 times and analyzed descriptively by the Kruskal Wallis test. The results showed that growth of apple cucumber shoots at the best combination treatment of IAA and Kinetin that is at concentrations 2,5x10-7 IAA and 3,2x10-5 Kinetin (A3B1) which resulted in appear shoots time at 39 days after initiation (hsi), it can provide the best growth of shoot height of 0,4 cm and the highest number of a shoot is 3. However, treatment with concentration 2,0x10-7 M IAA and 4,4x 10-5 Kinetin (A2B2) resulted in appearing shoots time at 39 days after initiation (hsi) and shoot height of 0,35 cm.

Cannabis sativa: From Therapeutic Uses to Micropropagation and Beyond

The development of a protocol for the large-scale production of Cannabis and its variants with little to no somaclonal variation or disease for pharmaceutical and for other industrial use has been an emerging area of research. A limited number of protocols have been developed around the world, obtained through a detailed literature search using web-based database searches, e.g., Scopus, Web of Science (WoS) and Google Scholar. This article reviews the advances made in relation to Cannabis tissue culture and micropropagation, such as explant choice and decontamination of explants, direct and indirect organogenesis, rooting, acclimatisation and a few aspects of genetic engineering. Since Cannabis micropropagation systems are fairly new fields, combinations of plant growth regulator experiments are needed to gain insight into the development of direct and indirect organogenesis protocols that are able to undergo the acclimation stage and maintain healthy plants desirable to the Cannabis industry. A post-culture analysis of Cannabis phytochemistry after the acclimatisation stage is lacking in a majority of the reviewed studies, and for in vitro propagation protocols to be accepted by the pharmaceutical industries, phytochemical and possibly pharmacological research need to be undertaken in order to ascertain the integrity of the generated plant material. It is rather difficult to obtain industrially acceptable micropropagation regimes as recalcitrance to the regeneration of in vitro cultured plants remains a major concern and this impedes progress in the application of genetic modification technologies and gene editing tools to be used routinely for the improvement of Cannabis genotypes that are used in various industries globally. In the future, with more reliable plant tissue culture-based propagation that generates true-to-type plants that have known genetic and metabolomic integrity, the use of genetic engineering systems including “omics” technologies such as next-generation sequencing and fast-evolving gene editing tools could be implemented to speed up the identification of novel genes and mechanisms involved in the biosynthesis of Cannabis phytochemicals for large-scale production.

Callus Induction from Root Fragments of Falcataria moluccana Plantlets

Callus induction of F. moluccana (sengon) was still an obstacle to indirect organogenesis regeneration. The purpose of the study was to determine the callus induction formation from root fragments of F. moluccana plantlets. Primary explants (fragments of roots) were cultivated on MS induction basal media and three concentration combination of PGRs (BAP and NAA): 0.5 ml/l BAP; 0,1 ml/l NAA (single PGR); and combination of 0.5 ml/l BAP + 0.1 ml/l NAA (double PGR). When roots were used as explants, high formation rates of callus (more than 70%) were obtained. Highest formation rates of callus were in NAA added at all clones (12 clones), then BAP added (7 clones) and BAP + NAA added (5 clones). The results indicated that BAP and NAA concentrations used in the media were influence the producing callus and affect the amount of callus produced from roots of sengon. The addition of NAA also gives higher callus proliferation results than the addition of BAP or the addition of a combination of the two hormones. The results indicated that BAP and NAA concentrations used in the media were influence the producing callus and affect the amount of callus produced from roots of sengon.