Small strain stiffness for granite residual soil: effect of stress ratio

Most previous studies have focused on the small strain stiffness of sedimentary soil while little attention has been given to residual soils with different properties. Most studies also neglected the effects of the deviator stress, which is extensively involved in civil engineering. This note considers the effects of the deviator stress on the small-strain stiffness of natural granite residual soil (GRS) as established from resonant column tests performed under various stress ratios. Although increasing the stress ratio results in a greater maximum shear modulus for both natural and remolded residual soils, remolded soil is more sensitive to changes in the stress ratio, which highlights the effects of soil cementation. The data herein offers new insights to understand the stiffness of residual soil and other weathered geomaterials.

A Modified Resonant Column Device for In-Depth Analysis of Vibration in Cohesive and Cohesionless Soils

With the accelerating progression of global climate change, switching to renewable energy sources is inevitable. Wind energy is a fast-growing branch of this industry, and according to the 2021 Global Wind Report, this trend must continue in order to limit the increase in global average temperature. While onshore wind turbines still dominate and account for most recent growth, offshore wind turbines are becoming a promising alternative for geographical, power density-related or even aesthetic reasons. Offshore wind turbines are subjected to more complex loading conditions and proper foundation design is very challenging, however, this is crucial for ensuring and maintaining the structure’s reliability. Soil dynamic tests are one of the bases for wind turbine foundation design. Technical regulations in many countries require such tests to be carried out in a Resonant Column (RC). In this study, a modification of the RC sensors and data acquisition system was introduced in order to conduct in-depth analysis of vibrating soil specimens. The new set of sensors contained five additional accelerometers (Analog Devices ADXL345) attached to the surface of a soil specimen that was subjected to dynamic loading. These accelerometers sent the data to a new data acquisition system, an ARM microcontroller with software developed by authors. The software was able to process test results synchronously with the original software of the RC device. Additionally, the load control system was supplemented with a current pulse generator, which makes it possible to observe the propagation of high-frequency mechanical waves in the tested materials. The modified dynamic testing equipment allowed for the measuring of accelerations and displacements at specific selected points located along the height of the sample, with sampling frequency more than three times higher than that offered by the sensors originally built into the RC device. As a result, some additional dynamic phenomena (i.e., disturbances in the uniformity of vibrations of non-cohesive materials, specimen–device contact imperfections) were observed in the tested soil specimens which remained undetected in standard RC test.

Comparison between Ramberg-Osgood and Hardin-Drnevich soil models in Midas GTS NX

This paper studies the two widely used material models for predicting the dynamic behavior of soils, the Ramberg-Osgood and Hadrin-Drnevich models. Resonant column and torsional simple shear test results on dry sand were used to calibrate and evaluate the model built in the finite element software Midas GTS NX. Both material models are already implemented by the software. This study estimates the ability and efficiency of both soil models coupled with the Masing criteria to predict the behavior of soil when subjected to irregular loading patterns, (e.g., earthquakes), and measure the two most important dynamic properties, the dynamic shear modulus, and the damping ratio.

Evaluation of Dynamic Properties of Sodium-Alginate-Reinforced Soil Using A Resonant-Column Test

Ground reinforcement is a method used to reduce the damage caused by earthquakes. Usually, cement-based reinforcement methods are used because they are inexpensive and show excellent performance. Recently, however, reinforcement methods using eco-friendly materials have been proposed due to environmental issues. In this study, the cement reinforcement method and the biopolymer reinforcement method using sodium alginate were compared. The dynamic properties of the reinforced ground, including shear modulus and damping ratio, were measured through a resonant-column test. Also, the viscosity of sodium alginate solution, which is a non-Newtonian fluid, was also explored and found to increase with concentration. The maximum shear modulus and minimum damping ratio increased, and the linear range of the shear modulus curve decreased, when cement and sodium alginate solution were mixed. Addition of biopolymer showed similar reinforcing effect in a lesser amount of additive compared to the cement-reinforced ground, but the effect decreased above a certain viscosity because the biopolymer solution was not homogeneously distributed. This was examined through a shear-failure-mode test.

Effect of Silica Fume as a Waste Material for Sustainable Environment on the Stabilization and Dynamic Behavior of Dispersive Soil

The use of dispersive soils, which are common in many parts of the world, in engineering applications such as water structures, earthen dams and road embankments is possible with their improvement. Recently, the effects of different chemicals on the stabilization of dispersive soils have been investigated. The use of waste materials in stabilization is preferred both because of the more sustainable environment and the economic advantages it provides. The use of silica fume (SF) as a waste material in different engineering applications provides an important advantage in environmentally and economically sustainable ways. Many studies have been carried out regarding silica fume, especially in the construction industry. Although SF is used in many industries, there is no study about its potential impact on the stabilization and dynamic properties of dispersive soils. In this study, first, Atterberg limits and standard Proctor compaction tests were performed on the mixtures prepared by adding different SF percentages (0, 5, 10, 15, 20, 25 and 30%). Afterward, pinhole tests and resonant column tests were performed to determine dispersibility and dynamic properties on the samples prepared by compaction characteristics for each SF percentage reached. In general, it was determined that SF contributed to a change in soil class, and improvement in dispersibility and dynamic properties of the soil sample, depending on SF content; positive effects of SF were observed in terms of shallow soil improvement.