Effects of Herbst Appliance Treatment on the Mandibular Incisor Segment: a Three-Dimensionally Analysis

Three-dimensionally evaluation of the treatment changes of a Herbst appliance using a lower anchorage unit not touching the lingual surface of the lower incisors. The sample consisted of 23 Class II:1 patients (12 males, 11 females) with a mean age of 15.7±1.7 years treated with a Flip-Lock Herbst® appliance (TP Orthodontics, Inc., La Porte, IN, USA). The lower anchorage unit for the Herbst appliance consisted of two anchor bands connected by a lingual arch with 3mm distance from the incisor’s lingual surface. Treatment changes in mandibular incisor inclination, overjet and overbite were evaluated by means of cone beam computed tomography images (i-CAT® Classic unit, Imaging Sciences International, Hatfield, PA, USA) obtained before and after treatment with the Herbst appliance. On average, there was a statistically significant increase in mandibular incisor inclination (2.6+1.8°) and a reduction in overjet (3.2+2.2mm) and overbite (1.3+0.9mm). Genders did not differ significantly. Incisor proclination was however only seen in 74% of the patients. The changes in mandibular incisor inclination were associated with the changes in overjet (/r/ = 0.1 to 0.5) and overbite (/r/ = 0.3 to 0.7). A Herbst appliance with a mandibular anchorage unit distant from the incisor’s lingual surface results in smaller amounts of mandibular incisor proclination compared to literature. However, as it induces canine anchorage loss, the decreased amount of proclination may not prevail after multibracket treatment. Keywords: Cone-Beam Computed Tomography. Mandibular Advancement. Tooth Movement Techniques. ResumoAvaliação tridimensional das alterações induzidas pelo aparelho Herbst utilizando a unidade de ancoragem inferior afastada da superfície lingual dos incisivos. A amostra incluiu 23 pacientes Classe II:1 (12 masculino, 11 feminino), média de idade 15,7 ± 1,7, tratados com aparelho Herbst Flip-Lock® (TP Orthodontics, Inc., La Porte, IN, EUA). A unidade de ancoragem inferior do aparelho Herbst consistiu-se de duas bandas conectadas por um arco lingual afastado 3mm da superfície lingual do incisivo. As alterações induzidas pelo tratamento na inclinação dos incisivos inferiores, trespasse horizontal e trespasse vertical foram avaliadas por meio de imagens de tomografias computadorizadas de feixe cônico (i-CAT® Classic unit, Imaging Sciences International, Hatfield, PA, USA) obtidas antes e após o tratamento com aparelho Herbst. Na média, houve diferença significativa com aumento da inclinação dos incisivos inferiores (2,6+1,8°) e diminuição do trespasse horizontal (3,2+2,2mm) e do trespasse vertical (1,3+0,9mm). Não houve diferença estatística entre os sexos. No entanto, a vestibularização do incisivo ocorreu em apenas 74% dos pacientes. As alterações na inclinação dos incisivos inferiores apresentam correlação estatisticamente significativa com as alterações no trepasse horizontal (/r/ = 0,1 a 0,5) e no trespasse vertical (/r/ = 0,3 a 0,7). O aparelho Herbst com uma unidade de ancoragem inferior afastada da superfície lingual dos incisivos resulta em menor quantidade de vestibularização do incisivo inferior em comparação com a literatura. Entretanto, como isto induz perda de ancoragem do canino, a diminuição da vestibularização pode não prevalecer ao final tratamento ortodôntico com braquetes. Palavras-chave: Tomografia Computadorizada de Feixe Cônico. Avanço Mandibular. Técnicas de Movimentação Dentária.

Incisor position and alveolar bone thickness:

ABSTRACT Objectives To evaluate incisor position and its relationship to alveolar bone in untreated optimal occlusions and in untreated Class II malocclusions. Materials and Methods Fifty-seven lateral cephalograms of individuals with naturally occurring optimal occlusions (mean age = 23 years) were used to assess positions of central incisors and their relationships to alveolar bone. Data were compared to a sample of 57 individuals with untreated Class II malocclusions with concurrent anterior-posterior (AP) skeletal discrepancies (mean age = 16.9 years). Results Significant intergroup differences were found for AP jaw relationship, maxillary alveolar bone thickness, mandibular incisor inclination, maxillary incisor root distance to labial surface of alveolar bone, and mandibular incisor root apex distance to labial surface of alveolar bone. Small differences between females and males existed for several variables. In both samples, maxillary incisor roots were located closer to the labial surface of alveolar process than to the palatal surface by roughly a 2:1 ratio. Mandibular incisor root apices were generally equidistant from the labial and lingual surfaces of the alveolus in the optimal sample but closer to the lingual surface in the Class II sample. Conclusions Maxillary incisors tend to occupy the anterior one-third of the alveolus in untreated individuals, regardless of AP interarch dental relationships or AP jaw relationships. Mandibular incisor root apices tend to be centered within the alveolus in untreated optimal occlusions but are more positively inclined, and their root apices are more posterior in untreated Class II malocclusions.

A comparative study between the effect of reverse curve of Spee archwires and anterior bite turbos in the treatment of deep overbite cases: A randomized clinical trial

ABSTRACT Objectives To compare deep overbite treatment using 0.016 × 0.022 nickel-titanium lower reverse curve of Spee archwire (LRCA) or metal anterior bite turbos (ABTs). Materials and Methods 48 patients with deep overbite malocclusion were randomly allocated into two groups. Group I (age = 18.4 ± 2.8 years, overbite = 5.8 ± 0.6 mm) was treated with LRCA, while Group II (age = 18.2 ± 3.1 years, overbite = 5.2 ± 0.4 mm) was treated with ABTs bonded to the palatal surface of the upper central incisors. Two cephalograms were taken for each patient, at post-alignment stage (T1) and post-leveling stage (T2). The primary outcomes were the anteroposterior and vertical changes of the lower teeth. The secondary outcomes were the effect on upper incisor inclination and the vertical linear changes of upper teeth, to assess the sagittal and vertical skeletal changes, and to compare the duration of overbite correction. Results 42 of the 48 patients recruited completed the study (21 in each group). At T2, the lower incisors proclined more in Group I (P ≤ .001). Both lower second molars (P ≤ .001) and lower first molars (P = .001) tipped more distally, while the lower first premolar tipped more mesially, in Group I (P < .05). All cusps of both lower molars showed more extrusion in Group II (P < .05) except for the mesial cusp of lower second molars (P = .095). The duration of overbite correction was shorter using the ABTs by 1.7 months (4.85 ± 1.56 and 3.15 ± 0.93 months for Group I and Group II, respectively). Conclusions LRCA causes lower incisor proclination with distal tipping of lower molars, while ABTs result in lower posterior tooth extrusion.

Application of Microscrew Implant Anchorage in Orthodontics

Objective: To study the value of microscrew implant anchorage in orthodontic treatment. Methods: A total of 80 cases received orthodontic treatment in recent two years were selected and divided into experimental group and control group based on their received orthodontic measures, each group contains 40 cases. The control group was treated with general orthodontic treatment plan, while the study group received microscrew implant anchorage for the treatment. The clinical conditions of the two groups were counted and observed. Results: After different treatments, the effect of the study group was significantly better than that of the control group. All the indicators (including the improvement of molar displacement, incisor inclination angle and incisor convex distance) were available. In addition, there are obvious differences between the two groups in the occurrence of adverse reactions including inflammatory reaction, soft tissue edema and discomfort. Conclusion: In oral clinic, microscrew implant anchorage can achieve ideal curative effect for those who need orthodontics. Besides, its safety is relatively high, which is worth popularizing widely.

Separation of aligning and leveling stages to control mandibular incisor inclination: A randomized clinical trial

ABSTRACT Objective: To determine whether separating the alignment and leveling phases can reduce proclination of the mandibular incisors. Methods: Eligibility criteria included Class I subjects with an irregularity index of 3-5 mm, 3-4 mm curve-of-Spee (COS), and non-extraction treatment. Thirty adults were randomly allocated into two groups: (1) Control group was leveled and aligned simultaneously with flat archwires progressively to 0.016x0.022-in stainless-steel; (2) Experimental group was aligned first with 0.014-in-superelastic NiTi with mild accentuated COS, then leveled using 0.016x0.022-in beta-titanium accentuated COS archwires and gradually reduced the curve until flat. Mandibular incisor position and inclination were evaluated by cephalometric analysis. COS and irregularity index were evaluated in study models. Assessment was conducted twice after 0.016-in NiTi and after 0.016x0.022-in stainless-steel archwire placements. Dental changes from cephalograms and models were compared within group using paired t-test and between groups using independent t-test. Results: Control group: Round-wire-phase, mandibular incisors tipped labially (4.38° and 1 mm) with intrusion (-1.13 mm); Rectangular-wire-phase, mandibular incisors further intruded and proclined (-0.63 mm and 1.38°). Experimental group: During aligning with round accentuated COS archwires, mandibular incisors tipped very slightly labially (0.75° and 0.50 mm) with no significant intrusion; during leveling with rectangular archwires, incisors majorly intruded (1.75 mm) with slight proclination (1.81°). The experimental group had significant less incisor proclination (control: 5.76°, experimental: 2.56°) with more incisor intrusion (control: -1.75 mm, experimental: -2.13 mm). The COS in experimental group showed significant greater reduction (-2.88 mm) than that of the control group (-1.69 mm). Conclusion: In control group, mandibular incisor proclination was markedly observed in round archwires, with further proclination caused by rectangular archwires. In experimental group, minimal proclination was exhibited when accentuated COS round archwires were used for aligning. Leveling with rectangular archwires caused less proclination with more COS reduction.

Pattern of Morphological Variability in Unrepaired Unilateral Clefts With and Without Cleft Palate May Suggest Intrinsic Growth Deficiency

In individuals with cleft lip and palate (CLP) an iatrogenic effect of operations on subsequent maxillary growth is well-known. Much less is known about the association between occurrence of CLP and intrinsic growth deficiency of the maxillofacial complex. The aim of this study was to compare morphological variability in subjects with unilateral cleft lip and alveolus/palate and unaffected controls using geometric morphometric methods. The research hypothesis was that if subjects with unrepaired unilateral CLP have intrinsic growth deficiency, the pattern of their craniofacial growth variation may differ from that in unaffected individuals. Lateral cephalograms were available of three groups of the same ethnic background (Proto-Malayid): (a) non-syndromic unrepaired unilateral complete cleft lip, alveolus, and palate (UCLP), N = 66, mean age 24.5 years (b) non-syndromic unrepaired unilateral complete cleft lip and alveolus (UCLA), N = 177, mean age 23.7 years, and (c) NORM (N = 50), mean age 21.2 years without a cleft. Using geometric morphometrics shape variability in groups and shape differences between groups was analyzed. Principal component analysis (PCA) was used to examine shape variability, while differences between groups and sexes were evaluated with canonical variate analysis. Sexual dimorphism was evaluated with discriminant function analysis (DA). Results showed that in comparison to NORM subjects, shape variability in UCLA and UCLP is more pronounced in the antero-posterior than in vertical direction. Pairwise comparisons of the mean shape configurations (NORM vs. UCLA, NORM vs. UCLP, and UCLA vs. UCLP) revealed significant differences between cleft and non-cleft subjects. The first canonical variate (CV1, 68.2% of variance) demonstrated that differences were associated with maxillary shape and/or position and incisor inclination, while in females, the CV1 (69.2% of variance) showed a combination of differences of “maxillary shape and/or position and incisor inclination” and inclination of the cranial base. Shape variability demonstrated considerable differences in subjects with UCLA, UCLP, and NORM. Moreover, in subjects with a cleft, within-sample variability was more pronounced in the antero-posterior direction, while in non-cleft subjects, within-sample variability was more pronounced in the vertical direction. These findings may suggest that subjects with unilateral clefts have intrinsic growth impairment affecting subsequent facial development.