Crop-coefficients of tomato as derived using monolithic weighing type lysimeter in mid hill region of Meghalaya

Crop coefficients (kc) was determined for tomato (Lycopersicon esculentum Mill.) with the help of UMS-GmBH cylindrical field lysimeter of 30 cm diameter and 120 cm deep and Penman-Monteith FAO-56 model. Eight other models viz. Modified Penman Method, Hargreaves equation, Samani-Hargreaves equation, Thornthwaite equation, Solar Radiation Method, Net Radiation Method, Blaney-Criddle Method and Radiation Method were also used for estimation of ET0­ and compared with Penman-Monteith model to find out the accuracy of prediction with limited weather parameters. Scatter plot and paired t-test were used for comparison. Out of all these models, Blaney-Criddle method, Solar and Net Radiation method were found to yield similar results as given by Penman-Monteith model. The values of crop evapo-transpiration (ETc) were varying from 2.54 mm d-1 to 6.70 mm d-1. The crop-coefficients (kc) for three growth stages of tomato viz., initial, mid and maturity were found to be 0.55, 1.07 and 0.78, respectively.

Techno-economic Analysis on the Production of Zinc Sulfide Nanoparticles by Precipitation Assisted Ultrasonic Radiation Method

Zinc sulfide is a material that has many uses in various fields. Zinc sulfide is deriving from the mineral sphalerite. The purpose of this study was to evaluate the feasibility of producing zinc sulfide from zinc acetate and sodium sulfide using the precipitation-assisted ultrasonic radiation method. This method is the most efficient method for the synthesis of zinc sulfide nanoparticles, because it does not take much time and the resulting product is high. The evaluation was done from the engineering and economic perspectives. The feasibility analysis method from the engineering perspective was done by designing the initial production design on a large scale, whereas the analysis from an economic perspective was done by calculating various economic parameters, that is Gross Profit Margin, Cumulative Net Present Value, Internal Rate Return, Payback Period, Break Event Point, and Profitability Index. The engineering perspective showed that the production of zinc sulfide nanoparticles can be done on a large scale due to the commercial availability of materials and tools. Based on the economic evaluation, the production of zinc sulfide nanoparticles by precipitation-assisted ultrasonic method is ideal for an industrial scale. Earned increased profits over 20 years, the payback on investment costs lasted only two years. We hope that this study can provide references to readers, industry, and researchers regarding the feasibility analysis of the production of zinc sulfide nanoparticles using the precipitation-assisted ultrasonic radiation method

Study on the aging characteristics of silicone rubber materials for composite insulators

The electron beam radiation method is emitted by electronic accelerators, which can change the chemical physical properties of radiation. Silicone rubber samples after different irradiation intesities were carried out for the 1000h aging test, and the electronic scanning microscopy (SEM), mechanical tensile and hydrophhy angle of the silicone rubber sample were measured, the test results shows that: after 1000h aging test, the visual apperence of the sample did not changed, the SEM showed that the surface of the silicone rubber became rough and the porosity increased, and the mechanic tension decrease. For moderate Irradiation intensity(60KGy), the aging characteristics of silicon rubber can be improved.

Determination of kinetic regularities of the process of drying perlite by radiation method

The actual methods of perlite drying are established. The radiation method of perlite drying is offered. A description of an experimental installation for drying perlite by the radiation method is given. The kinetic regularities of this method are established. Graphical dependences of moisture content on drying time, perlite surface temperature on drying time, and drying speed of perlite on drying time are described. The influence of the initial moisture content of perlite, the value of the heat flux density from the infrared emitter, the thickness of the perlite layer, and the value of the perlite fraction were determined. The analysis on the resulted graphic dependences is made. A drying installation with a combined drying method is proposed. The general conclusions concerning the expediency of a radiation method of drying perlite are made.