THE PREVALENCE OF VULVOVAGINAL CANDIDIASIS (VVC) AMONG WOMEN SUFFERING VAGINITIS ATTENDED A PRIVATE GYNECOLOGICAL CLINIC, ADEN-YEMEN

The study was carried out to determine the prevalence of vulvovaginal candidiasis among women suffering vaginitis. This prospective cross-sectional study was conducted among 120 women between the age of 15 to 45 years (mean age 39 years), attended a private gynecological clinic in Aden with symptoms of vaginitis between January and June 2019. A questionnaire was used to obtain information on the participants’ sociodemographic data and medical history. Direct microscopic examination (10% KOH), culture on SDA, germ tube test and gram staining were used to determine the prevalence of vulvovaginal candidiasis and to differentiate between C.albicans and non-albicans species. Out of 120 women, 25 (20.8%) were diagnosed with vulvovaginal candidiasis (VVC) and 95 (79.2%) with non-candidal vaginitis. C.albicans was the most prevalent with a prevalence rate of 17.5%. Although not statistically significant, vulvovaginal candidiasis tended to be more prevalent among women with 25-34 years. No statistically significant association between the prevalence of vulvovaginal candidiasis and educational level and marital status. Vulvovaginal candidiasis (VVC) was slightly high in Aden and Candida albicans was the most common causative agent of VVC. In the clinical diagnosis of VVC, both clinical criteria and microbiological tests must be used. Further study is needed to find out the prevalence of RVVC among women in the Aden governorate.

Measuerment of CO2-crude oil minimum miscible pressure in YC Oilfield by core displacement method

Aiming at the defect of measuring the CO2-crude oil MMP(minimum miscible pressure) by the slim tube test, the core displacement method is established based on indoor physical simulation and homogeneous rectangular core in the low permeability block of YC oilfield. For comparison, the MMP is measured by the slim tube test in the same block. Experimental results show that the method has good repeatability and can simulate porous media and reservoir water content, which is more consistent with the actual reservoir conditions. The MMP in the target block of YC oilfield was 19.85MPa, which was 1.87MPa lower than that measured by traditional slim tube test.

Moving computational multi-domain method for modelling the flow interaction of multiple moving objects

This study proposes a method where the flow field variables are communicated between multiple separate moving computational domains and simulates the flow interaction of multiple moving objects. Instead of using the conventional approach with a single fixed computational domain covering the whole flow field, this method advances the moving computational domain (MCD) method in which the computational domain itself moves in line with the motions of an object inside. The computational domains created around each object move independently, and the flow fields of each domain interact where the flows cross. This eliminates the spatial restriction for simulating multiple moving objects. After the results of the shock tube test verify that the interpolation has been achieved between grids, a validation test is conducted in which two spheres are crossed, and the forces exerted on one object due to the other’s crossing at a short distance are calculated. The results verify the reliability of this method and show that it is applicable to the flow interaction of multiple moving objects.

Myeloproliferative Disease: Dealing With a Diagnostic Dilemma

Myeloproliferative neoplasms (MPNs) constitute a group of hematologic clonal diseases that affect one or more myeloid lineages with abnormal proliferation. It is rare disease entity and incidence is about 1.15 to 4.99/100 000 person-years among hematological neoplasms for all subtypes of MPNs combined. Patients who present with hepatosplenomegaly, hyperleukocytosis with monocytosis should have routine tests along with bone marrow morphology possibly biopsy, quantiferon TB Gold in tube test, Dengue fever IgM, IgG, NS-1 antigen, cytogenetics t(9;22), BCR cABL fusion gene, JAK-2 V617F, MPL mutations, CALR gene test done along with karyotyping and flowcytometry to evaluate and establish diagnosis towards management.

The Effect of Freezing Sheep’s Milk on the Meltability, Texture, Melting and Fat Crystallization Profiles of Fresh Pasta Filata Cheese

Sheep’s milk is produced in smallholdings, which hinders the continuity of production. Therefore, freezing during periods of high production can be a solution. Herein, we examined the effect of freezing on sheep’s milk and a mixture of sheep and cow’s milk (70:30, v/v) on the quality of fresh pasta filata cheeses produced from the milk. Frozen/thawed sheep’s milk contributes little to the development of innovative and reformulated cheeses. This was due to 24% higher hardness and greater extensibility and cutting force, as well as lower stretching and elasticity. Although their flowability increased (Oiling-off from 3 to 12%), the meltability (tube test, and Schreiber test) decreased. Additionally, the use of frozen milk caused consumer dissatisfaction. The consumer penalty analysis of the just–about–right showed that freezing of the milk caused the loss of the refreshing, elasticity and shininess of pasta filata cheeses.

A study to evaluate etiology of denture stomatitis and to determine interrelationship with trauma and candida albicans count

Denture stomatitis (DS) is a disease characterized by inflammation and erythema of the oral mucosa areas covered by the denture. Multifactorial etiological factors contribute to denture stomatitis. The purpose of this study is to identify the etiology of denture stomatitis and to establish the role of trauma and fungal infection in denture stomatitis.Subjects wearing previously fabricated removable partial or complete denture who were diagnosed with denture stomatitis were included. It is a cross sectional questionnaire-based study, for mycological study swab sample was smeared, Sabouraud Dextrose Agar (SDA) was used as culture media. Germ tube test was used to identify Candida albicans. To test significance between different variablesKruskal-Wallis test was used. Out of 195 subjects’ slight stomatitis was present in 52.80% patients, followed by moderate stomatitis in 32.31% and no stomatitis in 2.56% subjects. Candida was present in 25.64% patients. Candida significantly more common in moderate stomatitis than others.This study has suggested that there is a significant relation in denture stomatitis and Candida albicans in north Indian population. No significant role of trauma was noticed. Strong correlation has been found in Denture hygiene, cleaning habits and Denture Stomatitis.

How Is Ultrasonic-Assisted CO2 EOR to Unlock Oils from Unconventional Reservoirs?

CO2 enhanced oil recovery (EOR) has proven its capability to explore unconventional tight oil reservoirs and the potential for geological carbon storage. Meanwhile, the extremely low permeability pores increase the difficulty of CO2 EOR and geological storage processing in the actual field. This paper initiates the ultrasonic-assisted approach to facilitate oil–gas miscibility development and finally contributes to excavating more tight oils. Firstly, the physical properties of crude oil with and without ultrasonic treatments were experimentally analyzed through gas chromatography (GC), Fourier-transform infrared spectroscopy (FTIR) and viscometer. Secondly, the oil–gas minimum miscibility pressures (MMPs) were measured from the slim-tube test and the miscibility developments with and without ultrasonic treatments were interpreted from the mixing-cell method. Thirdly, the nuclear-magnetic resonance (NMR) assisted coreflood tests were conducted to physically model the recovery process in porous media and directly obtain the recovery factor. Basically, the ultrasonic treatment (40 KHz and 200 W for 8 h) was found to substantially change the oil properties, with viscosity (at 60 °C) reduced from 4.1 to 2.8 mPa·s, contents of resin and asphaltene decreased from 27.94% and 6.03% to 14.2% and 3.79%, respectively. The FTIR spectrum showed that the unsaturated C-H bond, C-O bond and C≡C bond in macromolecules were broken from the ultrasonic, which caused the macromolecules (e.g., resin and asphaltenes) to be decomposed into smaller carbon-number molecules. Accordingly, the MMP was determined to be reduced from 15.8 to 14.9 MPa from the slim-tube test and the oil recovery factor increased by an additional 11.7%. This study reveals the mechanisms of ultrasonic-assisted CO2 miscible EOR in producing tight oils.

How Ultrasonic-Assisted CO2 EOR to Unlock Oils From Unconventional Reservoirs?

CO2 enhanced oil recovery (EOR) has been proven its capability to explore the unconventional tight oil reservoirs and potential for geological carbon storage. Meanwhile, the extremely low permeability pores exaggerate the difficulty CO2 EOR and geological storage processing in the actual field. This paper initiates the ultrasonic-assisted approach to facilitate the oil-gas miscibility development and finally contribute to unlock more tight oils. First, the physical properties of crude oil with and without ultrasonic treatments were experimentally analysed through gas chromatography (GC), Fourier-transform infrared spectroscopy (FTIR) and viscometer. Second, the oil-gas minimum miscibility pressures (MMPs) were measured from the slim-tube test and the miscibility developments with and without ultrasonic treatments were interpreted from the mixing-cell method. Third, the nuclear-magnetic resonance (NMR) assisted coreflood tests were conducted to physically model the recovery process in porous media and directly obtain the recovery factor. Basically, the ultrasonic treatment (40KHz and 200W for 8 hours) was found to substantially change the oil properties, with viscosity (at 60°C) reduced from 4.1 to 2.8mPa·s, contents of resin and asphaltene decreased from 27.94% and 6.03% to 14.2% and 3.79%, respectively. The FTIR spectrum shows the unsaturated C-H bond, C-O bond and C≡C bond in macromolecules were broken from ultrasonic, which caused the macromolecules (e.g., resin and asphaltenes) to be decomposed into smaller carbon-number molecules. Accordingly, the MMP was determined to be reduced from 15.8 to 14.9MPa from the slim-tube test and the oil recovery factor increased by over 10%. This study reveals the mechanisms of ultrasonic-assisted CO2 miscible EOR in producing tight oils.