cellulose accessibility
Recently Published Documents


TOTAL DOCUMENTS

61
(FIVE YEARS 24)

H-INDEX

22
(FIVE YEARS 3)

Processes ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 61
Author(s):  
Bo Fan ◽  
Lin Zhang ◽  
Zhengyu Tang ◽  
Liang Chen ◽  
Yu-Cai He

Purple Alfalfa is an inexpensive, abundant, readily available lignocellulosic material. This work was attempted to develop an efficient combination pretreatment by sequential HClO4–ethyl glycol–H2O (1.2:88.8:10, w/w/w) extraction at 130 °C in 0.5 h and urea/NaOH (urea 12 wt%, NaOH 7 wt%) soaking at −20 °C for 0.5 h for the pretreatment of purple alfalfa. The porosity, morphology, and crystallinity of pretreated purple alfalfa were characterized with SEM, FM, XRD, and FTIR. This combination pretreatment had a significant influence on hemicellulose removal and delignification. The above changes could enhance cellulose accessibility to enzymes and improve the enzymatic digestibility of cellulose. High yields of reducing sugars from pretreated purple alfalfa were obtained at 93.4%. In summary, this combination pretreatment has high potential application in the future.


Author(s):  
Xianqing Lv ◽  
Guangxu Yang ◽  
Zhenggang Gong ◽  
Xin Cheng ◽  
Li Shuai ◽  
...  

Chemical pretreatment followed by enzymatic hydrolysis has been regarded as a viable way to produce fermentable sugars. Phenylsulfonic acid (PSA) pretreatment could efficiently fractionate the non-cellulosic components (hemicelluloses and lignin) from bamboo and result in increased cellulose accessibility that was 10 times that of untreated bamboo. However, deposited lignin could trigger non-productive adsorption to enzymes, which therefore significantly decreased the enzymatic hydrolysis efficiency of PSA-pretreated bamboo substrates. Herein, poly(N-vinylcaprolactam) (PNVCL), a non-ionic surfactant, was developed as a novel additive for overcoming the non-productive adsorption of lignin during enzymatic hydrolysis. PNVCL was found to be not only more effective than those of commonly used lignosulfonate and polyvinyl alcohol for overcoming the negative effect of lignin, but also comparable to the robust Tween 20 and bovine serum albumin additives. A PNVCL loading at 1.2 g/L during enzymatic hydrolysis of PSA pretreated bamboo substrate could achieve an 80% cellulosic enzymatic conversion and meanwhile reduce the cellulase loading by three times as compared to that without additive. Mechanistic investigations indicated that PNVCL could block lignin residues through hydrophobic interactions and the resultant PNVCL coating resisted the adsorption of cellulase via electrostatic repulsion and/or hydration. This practical method can improve the lignocellulosic enzymatic hydrolysis efficiency and thereby increase the productivity and profitability of biorefinery.


2021 ◽  
Vol 16 (2) ◽  
pp. 75-83
Author(s):  
Muhammad Hanif ◽  
Aknasasia Virginia Krisanti ◽  
Selvy Salfitri ◽  
Yuli Darni ◽  
Herti Utami ◽  
...  

Corncob is abundantly available lignocellulosic biomass resources obtained from crops harvesting and found to be solid waste accumulation on a field. Less corncob is used as a solid fuel for cooking, and a more significant portion is vanished on the field by burning. Promisingly, corncob contains considerable cellulose as one value-added component potentially utilized as biomaterial or biofuel feedstock. However, the presence of lignin in natural lignocellulosic biomass results in recalcitrant structure and hinders cellulose accessibility. This study aimed to investigate microwave-assisted alkaline treatment to retain cellulose in the solid product while removing other impurities in corncob, especially hemicellulose and lignin. Sodium hydroxide was selected as a chemical with some variations in concentration. The chemical treatment was carried out under 400 W microwave power with various residence times and a 1:10 solid to liquor ratio. The cellulose content upgraded from 26.97% to 71.26% while reducing hemicellulose and lignin from 38.49% to 18.15% and 19.28% to 6.4%, respectively, on chemical treatment using 8% sodium hydroxide concentration for 20 minutes residence time. Scanning electron microscope (SEM) and Fourier transform infrared (FTIR) analysis also confirmed the results. The treated corncob also increased its crystallinity from 30.11% to 52.91%.


2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Rong Li ◽  
Yunze Sun ◽  
Yihao Zhou ◽  
Jiawei Gai ◽  
Linlu You ◽  
...  

AbstractA novel expansin-like protein (CxEXL22) has been identified and characterized from newly isolated Arthrobotrys sp. CX1 that can cause cellulose decrystallization. Unlike previously reported expansin-like proteins from microbes, CxEXL22 has a parallel β-sheet domain at the N terminal, containing many hydrophobic residues to form the hydrophobic surface as part of the groove. The direct phylogenetic relationship implied the genetic transfers occurred from nematode to nematicidal fungal Arthrobotrys sp. CX1. CxEXL22 showed strong activity for the hydrolysis of hydrogen bonds between cellulose molecules, especially when highly crystalline cellulose was used as substrate. The hydrolysis efficiency of Avicel was increased 7.9-fold after pretreating with CxEXL22. The rupture characterization of crystalline region indicated that CxEXL22 strongly binds cellulose and breaks up hydrogen bonds in the crystalline regions of cellulose to split cellulose chains, causing significant depolymerization to expose much more microfibrils and enhances cellulose accessibility.


2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Vera Novy ◽  
Fredrik Nielsen ◽  
Daniel Cullen ◽  
Grzegorz Sabat ◽  
Carl J. Houtman ◽  
...  

Abstract Background On-site enzyme production using Trichoderma reesei can improve yields and lower the overall cost of lignocellulose saccharification by exploiting the fungal gene regulatory mechanism that enables it to continuously adapt enzyme secretion to the substrate used for cultivation. To harness this, the interrelation between substrate characteristics and fungal response must be understood. However, fungal morphology or gene expression studies often lack structural and chemical substrate characterization. Here, T. reesei QM6a was cultivated on three softwood substrates: northern bleached softwood Kraft pulp (NBSK) and lodgepole pine pretreated either by dilute-acid-catalyzed steam pretreatment (LP-STEX) or mild alkaline oxidation (LP-ALKOX). With different pretreatments of similar starting materials, we presented the fungus with systematically modified substrates. This allowed the elucidation of substrate-induced changes in the fungal response and the testing of the secreted enzymes’ hydrolytic strength towards the same substrates. Results Enzyme activity time courses correlated with hemicellulose content and cellulose accessibility. Specifically, increased amounts of side-chain-cleaving hemicellulolytic enzymes in the protein produced on the complex substrates (LP-STEX; LP-ALKOX) was observed by secretome analysis. Confocal laser scanning micrographs showed that fungal micromorphology responded to changes in cellulose accessibility and initial culture viscosity. The latter was caused by surface charge and fiber dimensions, and likely restricted mass transfer, resulting in morphologies of fungi in stress. Supplementing a basic cellulolytic enzyme mixture with concentrated T. reesei supernatant improved saccharification efficiencies of the three substrates, where cellulose, xylan, and mannan conversion was increased by up to 27, 45, and 2800%, respectively. The improvement was most pronounced for proteins produced on LP-STEX and LP-ALKOX on those same substrates, and in the best case, efficiencies reached those of a state-of-the-art commercial enzyme preparation. Conclusion Cultivation of T. reesei on LP-STEX and LP-ALKOX produced a protein mixture that increased the hydrolytic strength of a basic cellulase mixture to state-of-the-art performance on softwood substrates. This suggests that the fungal adaptation mechanism can be exploited to achieve enhanced performance in enzymatic hydrolysis without a priori knowledge of specific substrate requirements.


2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Amit Kumar

Abstract Dissolving pulps are high-grade cellulose pulps that have minimum amount of non-cellulosic impurities. Dissolving pulps are the basic source for the manufacturing of several cellulosic products such as viscose, lyocell, cellulose acetates, cellulose nitrates, carboxymethyl-cellulose, etc. Dissolving pulps are mainly manufactured by pre-hydrolysis kraft and acid sulphite pulping. A high reactivity of dissolving pulps is desirable for its eco-friendly utilization for several purposes. Several approaches including mechanical, chemical, ultrasonic, and enzymatic treatments have been employed for the improvement of pulp reactivity. This review mainly focussed on pulp reactivity improvement through enzymatic approaches. Cellulases and xylanase have been proved effective for the improvement of pulp reactivity of dissolving pulp from different sources. The different combinations of cellulase, xylanase, and mechanical refining have been tested and found more effective rather than the single one.


Biomolecules ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 507
Author(s):  
Eduardo Troncoso-Ortega ◽  
Rosario del P. Castillo ◽  
Pablo Reyes-Contreras ◽  
Patricia Castaño-Rivera ◽  
Regis Teixeira Mendonça ◽  
...  

The objective of this study was to investigate structural changes and lignin redistribution in Eucalyptus globulus pre-treated by steam explosion under different degrees of severity (S0), in order to evaluate their effect on cellulose accessibility by enzymatic hydrolysis. Approximately 87.7% to 98.5% of original glucans were retained in the pre-treated material. Glucose yields after the enzymatic hydrolysis of pre-treated material improved from 19.4% to 85.1% when S0 was increased from 8.53 to 10.42. One of the main reasons for the increase in glucose yield was the redistribution of lignin as micro-particles were deposited on the surface and interior of the fibre cell wall. This information was confirmed by laser scanning confocal fluorescence and FT-IR imaging; these microscopic techniques show changes in the physical and chemical characteristics of pre-treated fibres. In addition, the results allowed the construction of an explanatory model for microscale understanding of the enzymatic accessibility mechanism in the pre-treated lignocellulose.


2021 ◽  
Author(s):  
Vera Novy ◽  
Fredrik Nielsen ◽  
Daniel Cullen ◽  
Grzegorz Sabat ◽  
Carl J. Houtman ◽  
...  

Abstract BackgroundOn-site enzyme production using Trichoderma reesei can improve yields and lower the overall cost of lignocellulose saccharification by exploiting the fungal gene regulatory mechanism that enables it to continuously adapt enzyme secretion to the substrate used for cultivation. To harness this, the interrelation between substrate characteristics and fungal response must be understood. However, fungal morphology or gene expression studies often lack structural and chemical substrate characterization. Here, T. reesei QM6a was cultivated on three softwood substrates: northern bleached softwood Kraft pulp (NBSK) and lodgepole pine pretreated by dilute-acid-catalyzed steam pretreatment (LP-STEX) and mild alkaline oxidation (LP-ALKOX). With different pretreatments of similar starting materials, we presented the fungus with systematically modified substrates. This allowed the elucidation of substrate-induced changes in the fungal response and the testing of the secreted enzymes’ hydrolytic strength towards the same substrates.ResultsEnzyme activity time courses correlated with hemicellulose content and cellulose accessibility. Specifically, increased amounts of side chain-cleaving hemicellulolytic enzymes in the protein produced on the complex substrates (LP-STEX; LP-ALKOX) was observed by secretome analysis. Confocal laser scanning micrographs showed that fungal micromorphology responded to changes in cellulose accessibility and initial culture viscosity. The latter was caused by surface charge and fiber dimensions, and likely restricted mass transfer, resulting in morphologies of fungi in stress. Supplementing a basic cellulolytic enzyme mixture with concentrated T. reesei supernatant improved saccharification efficiencies of the three substrates, where cellulose, xylan, and mannan conversion was increased by up to 27%, 45%, and 2800%, respectively. The improvement was most pronounced for proteins produced on LP-STEX and LP-ALKOX on those same substrates, and in the best case, efficiencies reached those of a state-of-the-art enzyme preparation.ConclusionCultivation of T. reesei on LP-STEX and LP-ALKOX produced a protein mixture that increased the hydrolytic strength of a basic cellulase mixture to state-of-the-art performance on softwood substrates. This suggests that the fungal adaptation mechanism can be exploited to achieve enhanced performance in enzymatic hydrolysis without a priori knowledge of specific substrate requirements.


Sign in / Sign up

Export Citation Format

Share Document