Interaction of cationic surfactant with acid yellow dye in absence/presence of organic and inorganic additives: conductivity and dye solubilization methods

In the present study, the conductometric and dye-solubilization techniques have been utilized to investigate the interaction between an anionic dye (acid yellow 23 [AY]) and a cationic surfactant (cetyltrimethylammonium bromide [CTAB]) in presence of organic (ethanol)/inorganic (NaCl) additives. From the conductometric method, two critical micelle concentrations (cmc) were found for AY + CTAB mixture in an aqueous system and the cmc values were found to undergo a change with the variation of AY concentrations. The cmc values of AY + CTAB systems were observed higher in the alcoholic medium, while the same was found to be lower in the NaCl solutions. The change in cmc of AY + CTAB systems shows an U-like curve with an increase of temperature. The negative free energy of micellization ( Δ G m o ${\Delta}{G}_{m}^{o}$ ) for the AY + CTAB systems has indicated a spontaneous micelle formation in all of the cases studied. The enthalpy ( Δ H m o ${\Delta}{H}_{m}^{o}$ ), as well as the entropy of micellization ( Δ S m o ${\Delta}{S}_{m}^{o}$ ) for the AY + CTAB systems, were assessed and discussed with proper reasoning. Additionally, the enthalpy-entropy compensation parameters were also investigated and illustrated. The solubility of AY and C D was observed to rise linearly with an increase in the concentration of CTAB/NaCl solution. The solubilization capacity (χ) of AY, the molar partition coefficient (K M) amongst the micellar and the aqueous phase, and free energy of solubilization ( Δ G S o ${\Delta}{G}_{S}^{o}$ ) were evaluated and discussed in detail. The former parameters undergo an increase with an increase of NaCl concentrations.

Importance of Conjugation of the Bile Salt on the Mechanism of Lipolysis

We aim to advance the discussion on the significance of the conjugation of bile salts (BS) in our organism. We hypothesize that conjugation influences the rate of lipolysis. Since the rate of lipolysis is a compound parameter, we compare the effect of conjugation on four surface parameters, which contribute to the rate. Since deconjugation is due to gut microbiota, we hypothesize that microbiota may affect the rate of lipolysis. A meta-analysis of literature data of critical micelle concentration, β, aggregation number, and molar solubilization ratio has been performed for the first time. In addition, critical micelle concentration (CMC), interfacial tension, and lipolysis rate measurements were performed. It was found that the unconjugated BS in mixed micelles increases the antagonism between the BS, therefore, increasing the CMC. This correlated with the effect of unconjugated BS on the solubilization capacity of mixed micelles. The collected literature information indicates that the role of the BS and its conjugation in our organism is a key factor influencing the functioning of our organism, where too high levels of unconjugated BS may lead to malabsorption of fat-soluble nutrients. The experimental lipolysis results irrevocably showed that conjugation is a significant factor influencing the rate.

Isolation, Identification, Biocontrol Activity, and Plant Growth Promoting Capability of a Superior Streptomyces tricolor Strain HM10

Streptomyces is a genus with known biocontrol activity, producing a broad range of biologically active substances. Our goal was to isolate local Streptomyces species, evaluate their capacity to biocontrol the selected phytopathogens, and promote the plant growth via siderophore and indole acetic acid (IAA) production and phosphate solubilization. Eleven isolates were obtained from local soil samples in Saudi Arabia via the standard serial dilution method and identified morphologically by scanning electron microscope (SEM) and 16S rRNA amplicon sequencing. The biocontrol of phytopathogens was screened against known soil-borne fungi and bacteria. Plant growth promotion capacity was evaluated based on siderophore and IAA production and phosphate solubilization capacity. From eleven isolates obtained, one showed 99.77% homology with the type strain Streptomyces tricolor AS 4.1867, and was designated S. tricolor strain HM10. It showed aerial hyphae in SEM, growth inhibition of ten known phytopathogens in in vitro experiments, and the production of plant growth promoting compounds such as siderophores, IAA, and phosphate solubilization capacity. S. tricolor strain HM10 exhibited high antagonism against the fungi tested (i.e., Colletotrichum gloeosporides with an inhibition zone exceeding 18 mm), whereas the lowest antagonistic effect was against Alternaria solani (an inhibition zone equal to 8 mm). Furthermore, the most efficient siderophore production was recorded to strain HM8, followed by strain HM10 with 64 and 22.56 h/c (halo zone area/colony area), respectively. Concerning IAA production, Streptomyces strain HM10 was the most effective producer with a value of 273.02 μg/ml. An autochthonous strain S. tricolor HM10 should be an important biological agent to control phytopathogens and promote plant growth.

Solubilization and thermodynamic properties of simvastatin in various micellar solutions of different non-ionic surfactants: Computational modeling and solubilization capacity

The aim of this work was to solubilize simvastatin (SIM) using different micellar solutions of various non-ionic surfactants such as Tween-80 (T80), Tween-20 (T20), Myrj-52 (M52), Myrj-59 (M59), Brij-35 (B35) and Brij-58 (B58). The solubility of SIM in water (H2O) and different micellar concentrations of T80, T20, M52, M59, B35 and B58 was determined at temperatures T = 300.2 K to 320.2 K under atmospheric pressure p = 0.1 MPa using saturation shake flask method. The experimental solubility data of SIM was regressed using van’t Hoff and Apelblat models. The solubility of SIM (mole fraction) was recorded highest in M59 (1.54 x 10−2) followed by M52 (6.56 x 10−3), B58 (5.52 x 10−3), B35 (3.97 x 10−3), T80 (1.68 x 10−3), T20 (1.16 x 10−3) [the concentration of surfactants was 20 mM in H2O in all cases] and H2O (1.94 x 10−6) at T = 320.2 K. The same results were also recorded at each temperature and each micellar concentration of T80, T20, M52, M59, B35 and B58. “Apparent thermodynamic analysis” showed endothermic and entropy-driven dissolution/solubilization of SIM in H2O and various micellar solutions of T80, T20, M52, M59, B35 and B58.

Features of Solubilizing Effect of Amphiphilic Compounds during Pulp Deresination

The necessity to improve the existing technology of pulp deresination, in particular, to reduce the surfactants consumption and decrease the environmental load, led to a combination of existing methods of resin removal with the use of enzymatic treatment. The basis of the pulp deresination mechanism by amphiphilic compounds is the solubilization of resinous substances. Thus, the establishment of the patterns of this process and its control predetermines the success of implementation of the selected technology. The features of solubilization of triolein and rosin in the lipase-based systems of individual nonionic surfactants, the enzyme, as well as their synergistic mixtures with the determination of solubilization capacities of micelles and the possible mechanism of solubilizate incorporation into them were studied using spectrophotometry, pH measurement and dynamic light scattering. It was found that synthamide-5 has a low deresination capability in spite of the high solubilization capacity of its micelles and the production of aggregates with a hydrodynamic radius up to 98 nm after diffusion of rosin into them. It is likely that compact micellar structures with a developed surface, which are implemented in mixed systems of amphiphilic compounds, including the presence of synthamide-5 in them, are more preferable for successful deresination of pulp semi-finished products. The addition of lipase leads to an increased solubilization capacity of mixed aggregates and an increase in the intensity of solubilizate molecules incorporation. Thus, depending on the nature of the amphiphilic compound, there is a different mechanism for solubilizate incorporation into micelles. Determination of the size of associates in mixed systems showed the absence of enzyme denaturation, which predicts the successful application of such cooperative systems for deresination of fiber semi-finished products. It is found that the solubilizing capability of the studied systems on resin modeling objects correlates with their deresination capability with respect to different fiber semi-finished products.

Solubilization of Itraconazole by Surfactants and Phospholipid-Surfactant Mixtures: Interplay of Amphiphile Structure, pH and Electrostatic Interactions

Although surfactants are frequently used in enabling formulations of poorly water-soluble drugs, the link between their structure and drug solubilization capacity is still unclear. We studied the solubilization of the “brick-dust” molecule itraconazole by 16 surfactants and 3 phospholipid:surfactant mixtures. NMR spectroscopy was used to study in more details the drug-surfactant interactions. Very high solubility of itraconazole (up to 3.6 g/L) was measured in anionic surfactant micelles at pH = 3, due to electrostatic attraction between the oppositely charged (at this pH) drug and surfactant molecules. ¹H NMR spectroscopy showed that itraconazole is ionized at two sites (2+ charge) at these conditions: in the phenoxy-linked piperazine nitrogen and in the dioxolane-linked triazole ring. The increase of amphiphile hydrophobic chain length had a markedly different effect, depending on the amphiphile type: the solubilization capacity of single-chain surfactants increased, whereas a decrease was observed for double-chained surfactants (phosphatidylglycerols). The excellent correlation between the chain melting temperatures of phosphatidylglycerols and itraconazole solubilization illustrated the importance of hydrophobic chain mobility. This study provides rules for selection of itraconazole solubilizers among classical single-chain surfactants and phospholipids. The basic physics underpinning the described effects suggests that these rules should be transferrable to other “brick-dust” molecules.

Solubilization of Itraconazole by Surfactants and Phospholipid-Surfactant Mixtures: Interplay of Amphiphile Structure, pH and Electrostatic Interactions

Although surfactants are frequently used in enabling formulations of poorly water-soluble drugs, the link between their structure and drug solubilization capacity is still unclear. We studied the solubilization of the “brick-dust” molecule itraconazole by 16 surfactants and 3 phospholipid:surfactant mixtures. NMR spectroscopy was used to study in more details the drug-surfactant interactions. Very high solubility of itraconazole (up to 3.6 g/L) was measured in anionic surfactant micelles at pH = 3, due to electrostatic attraction between the oppositely charged (at this pH) drug and surfactant molecules. ¹H NMR spectroscopy showed that itraconazole is ionized at two sites (2+ charge) at these conditions: in the phenoxy-linked piperazine nitrogen and in the dioxolane-linked triazole ring. The increase of amphiphile hydrophobic chain length had a markedly different effect, depending on the amphiphile type: the solubilization capacity of single-chain surfactants increased, whereas a decrease was observed for double-chained surfactants (phosphatidylglycerols). The excellent correlation between the chain melting temperatures of phosphatidylglycerols and itraconazole solubilization illustrated the importance of hydrophobic chain mobility. This study provides rules for selection of itraconazole solubilizers among classical single-chain surfactants and phospholipids. The basic physics underpinning the described effects suggests that these rules should be transferrable to other “brick-dust” molecules.