Synthesis, Characterization and Adsorption Studies of a Graphene Oxide/Polyacrylic Acid Nanocomposite Hydrogel

The AAc/GO nanocomposite hydrogel was successfully employed as a polymeric Nano sorbent of the removal efficiency of M G dye from the model. The complication of the mechanism of the adsorption system was completely exposed by examining how solution pH affects adsorption, Ionic strength isotherm models, kinetic models, and thermodynamics. The adsorption of the MG dye was greatly dependent on the solution pH. The Freundlich model has been demonstrated to be the most accurate in describing the MG dye sorption, whilst the Langmuir model was shown to be the least accurate. Additionally, these integrated mechanisms fit nicely within the framework of a pseudo-second-order model. Additionally, the contact time at equilibrium short (ten minutes) required to MG removes demonstrates the AAc/GO nanocomposite hydrogel can be considered an efficient and potentially useful adsorbent for MG removal from industrial effluents.

The use of air-lift adsorber with a floating filling from a cross-linked chitosan hydrogels for Reactive Black 5 removal

This work substantially extends knowledge on the possibilities of treating colored industrial wastewater via sorption under flow conditions. The presented study aimed to determine the effectiveness of Reactive Black 5 (RB5) dye sorption from aqueous solutions under dynamic (flow) conditions in an unconventional air-lift type loop reactor with a filling made of hydrogel chitosan sorbents. The dye was removed from mono-component solutions (deionized water + RB5) and synthetic dyeing wastewater containing RB5 dye, NaCl (3 g/L), and an anti-creasing agent—UNICREASE JET (2 g/L). The sorbents tested in the study included: unmodified chitosan (CHs), chitosan ionically cross-linked with sodium citrate (CHs-CIT), and chitosan covalently cross-linked with epichlorohydrin (CHs-ECH). Each experimental series aimed to determine: the bed break-through time (CE = 0.1 C0), time of depletion of the sorbent’s sorption properties (CE = C0), and maximal sorption capacity of the sorbents (Qmax). The data obtained under dynamic conditions were described using Thomas, Yoon–Nelson, and Bohart–Adams models. The volume of the solution effectively treated in the air-lift reactor was significantly affected by chitosan sorbent type. At C0 = 50 mg RB5/L, the adsorber with the filling made of 1 g d.m. CHs allowed for the effective treatment of 4.6 L of synthetic wastewater (Qmax = 1504.7 mg/g), whereas CHs-ECH ensured 34.6 L of the treated solution (Qmax = 3212.9 mg/g).

A new 3D luminescent Ba-organic framework with high open metal sites: CO2 fixation, luminescence sensing, and dye sorption

A new synthesized 3D luminescent Ba-organic framework (1) may be used as a recyclable heterogeneous catalyst for fixation of CO2 and has excellent response and sensitivity for pollutant ions. Moreover, 1 exhibits the particular selective sorption towards Congo red (CR) dye.

Synthesis and Performance of Hybrid Hydrogels Loaded with Methylene Blue and Its Use for Antimicrobial Photodynamic Inactivation

Development and characterization of hybrid hydrogels loaded with methylene blue, which are designed to apply for photodynamic therapy, are presented. Hybrid hydrogels were synthesized by grafting polyacrylamide onto dextran/dextran sulfate sodium salt using N, N′-methylene-bis-acrylamide as a cross-linker. The differences in microstructure of synthesized hydrogels were proved by scanning electron microscopy. FTIR spectra testify that the chemical nature of hydrogel components affects the hydrogel hydrophilicity. The swelling properties of hydrogels in water and absorption/desorption hydrogels’ ability towards methylene blue were studied. It was shown that dye sorption was dependent on the hydrogel type. The hydrogel based on dextran and polyacrylamide revealed the highest ability to release absorbed dye. The bactericidal effect of this hydrogel loaded with methylene blue and activated by red light in suspension and solid medium of S. aureus was tested. The increase of bactericidal activity of hybrid hydrogel was dependent on radiation doses.