Nose Tip Elongation and Elevation: A Novel Filler Injection Technique

Background Filler injection for nose tip improvement remains a difficult subject due to efficacy and safety issues. Objectives To better the techniques and safety for nose tip improvement with a filler. Methods Patients seeking nose tip improvement were recruited regardless of their pre-treatment conditions. A hyaluronic acid filler is injected through the skin behind the nose tip into the potential septal space. To achieve tip elevation, the filler is retro injected from the anterior nasal spine, stopping at the mid-level of medial crura. To elongate the nose, the filler is deposited just in front of the caudal septal cartilage. The tip extends in the sagittal plane, causing the nose tip to move either caudally (tip elongation) or anteriorly (tip elevation), or both, as directed by the surgeon. Results Depending on the patients, the nose could be elongated by 2 to 6mm, and the tip could be elevated by 2 to 8 mm. Additionally, stronger columellar support, finer tip structures, and improved nasolabial angle are observed. Interestingly, the upper lip appears shorter. The nostril shapes and the alar widths are also improved. A total of 1288 cases are reported. Only two patients expressed dissatisfaction. Conclusions This technique is easy and safe to perform and, the results are natural and comparable to those from rhinoplasty surgeries. Further, this report of filler nose lengthening may be the first large series in the world. Finally, this technique works well in all populations.

Anatomical Patterns of the Nasopalatine Canal and Incisive Foramen in an African Setting – a Cross-sectional Study

Purpose: Surgical procedures revolving around the anterior maxilla are of great interest due to their debilitating facial aesthetics and nerve injury effects if complications arise. Hence, sufficient knowledge concerning the morphology and morphometry of the nasopalatine canal (NPC) and incisive foramen (IF) is necessary to prevent such complications from arising. Materials and Methods: Measurements of the NPC and the IF were carried out on 150 CBCT scans. The maxillary bone thickness anterior to the NPC was measured at 3 levels. Independent t-test and chi-square test were performed to determine the presence of sexual dimorphism. Results: The presence of one Stenson’s foramen was most prevalent. The mean length of NPC was 13.21 ± 3.25 mm with significantly longer canals in males. The most prevalent shape of NPC was cylindrical in sagittal view and a single canal in coronal view. The mean angulation of NPC was 118.42° to the horizontal plane. The average dimensions of the IF were 3.53 mm and 3.07 mm in the anteroposterior and mediolateral diameter respectively while the most common shape was round. The anterior maxillary bone was thicker in males and generally reduced in thickness from the anterior nasal spine superiorly towards the alveolar crest inferiorly. Conclusion: This study highlights the anatomical characteristics of the NPC and IF, with significant sexual dimorphism observed regarding the number of Stenson’s foramina, length of NPC, shapes of the NPC and IF as well as alveolar bone thickness anterior to NPC.

Evaluation of an automated superimposition method based on multiple landmarks for growing patients

ABSTRACT Objectives To determine if an automated superimposition method using six landmarks (Sella, Nasion, Porion, Orbitale, Basion, and Pterygoid) would be more suitable than the traditional Sella-Nasion (SN) method to evaluate growth changes. Materials and Methods Serial lateral cephalograms at an average interval of 2.7 years were taken on 268 growing children who had not undergone orthodontic treatment. The T1 and T2 lateral images were manually traced. Three different superimposition methods: Björk's structural method, conventional SN, and the multiple landmark (ML) superimposition methods were applied. Bjork's structural method was used as the gold standard. Comparisons among the superimposition methods were carried out by measuring the linear distances between Anterior Nasal Spine, point A, point B, and Pogonion using each superimposition method. Multiple linear regression analysis was performed to identify factors that could affect the accuracy of the superimpositions. Results The ML superimposition method demonstrated smaller differences from Björk's method than the conventional SN method did. Greater differences among the cephalometric landmarks tested resulted when: the designated point was farther from the cranial base, the T1 age was older, and the more time elapsed between T1 and T2. Conclusions From the results of this study in growing patients, the ML superimposition method seems to be more similar to Björk's structural method than the SN superimposition method. A major advantage of the ML method is likely to be that it can be applied automatically and may be just as reliable as manual superimposition methods.

The Caudal Septum Pivot Technique for Short Nose Correction

The short nose represents one of the greatest challenges in rhinoplasty. It is characterized by a reduced distance from the nasal radix to the tip-defining points, often associated with inadequate tip projection. Several techniques have been described for correction of short nose with the common objective of replacing and rebuilding the osteocartilaginous framework. One of the most effective method to correct the short nose is the septal extension graft. The authors describe the caudal septum pivot (CSP) technique, a simple method to elongate short noses by using a graft inserted in the dorsal septum after its division using as pivot the caudal portion, without detaching it from its natural anchorage to the anterior nasal spine. A retrospective analysis was performed reviewing the clinical charts and the operative records of 315 patients who underwent revision rhinoplasty from January 2015 to June 2019; among this group, 34 were considered eligible for the study. The patients (8 men, 26 women; mean age: 25.4 years; age range: 22–53 years) were divided into two groups: in 12 patients (Group 1) the CSP technique was performed, while Group 2 was composed of 22 patients who received a more classic treatment with a septal extension graft. To evaluate the outcomes, nasal length, tip projection, and tip rotation were measured pre- and 1 year postoperatively on digital photographs of each patient. Nasal anthropometric measurements revealed, at 12-month visit follow-up, an improvement in nasal length, tip projection, and nasolabial angle was achieved in all the patients. The comparison of the pre- and postoperative values showed a statistically significant reduction in the nasolabial angle (p < 0.05) and an increase in the tip projection (p < 0.05) and in the nasal lengthening (p < 0.05) in both groups. In authors' experience, the CSP technique could be considered a safe, reliable, and effective alternative technique in selected patients.

Does the Timing of 1-Stage Palatoplasty With Radical Muscle Dissection Effect Long-Term Midface Growth? A Single-Center Retrospective Analysis

Objective: To evaluate the long-term effect of timing of 1-stage palatoplasty on midfacial growth in patients with cleft lip and palate (CLP). Design: Retrospective observational cohort study. Study Setting: Institutional hospital. Patients: One hundred twelve patients with CLP who underwent palatoplasty and were divided into 3 groups: group I: operated between 9 and 11 months; group II: operated between 18 and 20 months; and group III: operated between 21 and 24 months. Interventions: All patients underwent von Langenbeck palatoplasty technique, which was converted to a Bardach 2-flap technique in case of any technical difficulties. The patients were followed up between 8 and 9 years when they reported for secondary alveolar bone grafting. Postsurgical cephalometric and dental casts measurements were taken for midfacial growth analysis. Main Outcome Measures: The cephalometric measures were analyzed for midfacial growth and compared within the groups. Results: Statistically significant difference ( P < .01) was found on comparing the cephalometric parameters such as sella–nasion–A point angle (SNA), A point–nasion–B point angle (ANB), n toperpendicular to point A (N-perpA), condylon to point A (Co-A), anterior nasal spine to posterior nasal spine (ANS-PNS), nasion to Anterior nasal spine (N-ANS), nasion to menton (N Me), and witts appraisal (Witt (AO-BO)) in group I when compared to both group II and group III patients, implying deficient midfacial growth in group I. No statistical difference was found in the cephalometric values between group II and group III. Group II had better cephalometric measurements than group III, showing better growth in group II than group III. Overall, there was less incidence of midfacial hypoplasia in patients treated between 18 and 20 months (group II). Conclusion: We conclude that palatal closure carried out at 18 to 20 months and 21 to 24 months is associated with better midfacial growth when compared to closure at 9 to 11 months. The best time to operate would be between 18 and 20 months to avoid speech disturbances. Midfacial growth can be greatly influenced by the timing of 1-stage palatoplasty.

Evaluating the Lower Anterior Facial Height in Patients Treated with Extraction Versus Non-extraction Fixed Mechanotherapy: “A Systematic Review and Meta-analysis”

Objective: The objective of this study was to evaluate the effects of the four first premolars extraction compared with a non-extraction treated control group on the lower anterior facial height. Methods: Electronic search was conducted on PubMed, Cochrane, Scopus, Lilacs, Scielo, clinical trials, and opengrey.eu databases; only article published in English were included. The eligibility criteria were extraction of four first premolars compared with a non-extraction control group treated with fixed mechanotherapy. Anterior Nasal Spine to Menton (ANS-Me) (mm) was taken as the primary outcome; Frankfurt mandibular plane angle (FMA) and Nasion to Menton (N-Me) were selected as secondary outcomes. Non-randomized Studies-of Intervention (ROBINS-I) tool was used for the quality assessment and risk of bias. Heterogeneity was analyzed using statistical tests, including chi-squared-based Q-statistic, tau-square, and I-squared statistics. Review Manager was used for quantitative assessment and meta-analysis. Results: Five retrospective studies were included for quantitative assessment and three were included in the meta-analysis due to certain missing data. Extraction of four first premolars did not affect both primary and secondary outcomes with P = .65, P = .93, and P = .91, respectively, for ANS-Me, FMA, and N-Me. Conclusion: This review and meta-analysis concluded that there was no statistically significant effect of extraction of four first premolars on lower anterior facial height.

The Performance of Secondary Nasal Alar Base Revision for Unilateral Cleft Lip by Single YV-Plasty (the Importance of Overcorrection During Surgery)

Although primary surgery for cleft lip has improved over time, the degree of secondary cleft or nasal deformity reportedly varies from a minimum degree to a remarkable degree. Patients with cleft often worry about residual nose deformity, such as a displaced columella, a broad nasal floor, and a deviation of the alar base on the cleft side. Some of the factors that occur in association with secondary cleft or nasal deformity include a deviation of the anterior nasal spine, a deflected septum, a deficiency of the orbicularis muscle, and a lack of bone underlying the nose. Secondary cleft and nasal deformity can result from incomplete muscle repair at the primary cleft operation. Therefore, surgeons should manage patients individually and deal with various deformities by performing appropriate surgery on a case-by-case basis. In this report, we applied the simple method of single VY-plasty on the nasal floor to a patient with unilateral cleft to revise the alar base on the cleft side. We adopted this approach to achieve overcorrection on the cleft side during surgery, which helped maintain the appropriate position of the alar base and ultimately balanced the nose foramen at 13 months after the operation. It was also possible to complement the height of the nasal floor without a bone graft. We believe that this approach will prove useful for managing cases with a broad and low nasal floor, thereby enabling the reconstruction of a well-balanced nose.

One-Year Treatment Outcome of Profile Changes After Transcutaneous Maxillary Distraction Osteogenesis in Growing Children With Cleft Lip and Palate

Objective: To evaluate the long-term stability of LeFort I osteotomy followed by distraction osteogenesis with a transcutaneous rigid external device for the treatment of severe maxillary hypoplasia in patients with cleft lip and palate. Patients and Methods: Nine patients with cleft lip and palate underwent rigid external distraction after a LeFort I osteotomy for maxillary advancement. Lateral cephalometric films were analyzed for assessment of treatment outcome and stability in 1 month, 6 months, and 1 year after distraction. Results: Significant maxillary advancement was observed in the horizontal direction, with the anterior nasal spine (ANS) distance of the maxilla increasing by an average of 20.5 ± 5.1 mm after distraction. The ANS relapse rates in 6 months and 1 year were 8.7% and 12.8%, respectively. The mean inclination of upper incisors to the palatal plane was almost unchanged (before: 109.8° ± 6.6°; after: 108.9° ± 7.5°). The movement ratios at the nasal tip/ANS, soft tissue A point/A point, and the upper vermilion border/upper incisor edge were 0.36:1, 0.72:1, and 0.83:1, respectively. Conclusion: Considerable maxillary advancement was achieved with less change of incisors inclination after distraction. Moreover, the relapse rate after 1 year was minimal. The concave facial profile was improved as well as the facial balance and aesthetics.

Three-Dimensional Assessment of Craniofacial Features in Patients With Down Syndrome During the Mixed Dentition Period: A Case-Control Study

Objectives: Down syndrome (DS) is a common congenital chromosomal disorder related to trisomy 21. Lateral cephalometric radiography studies have shown that patients with DS have characteristic craniofacial morphology; however, no 3-dimensional analysis studies have been performed to investigate the craniofacial features, including volumetric aspects, of patients with DS. The present study was performed to evaluate the craniofacial features, including volumetric aspects, of patients with DS and to compare these findings with control participants using cone beam computed tomography (CBCT). Materials and Methods: The study sample consisted of 12 patients with DS and 12 control participants. All participants were examined by means of CBCT; the resulting images were used for evaluation of maxillary and mandibular volume, cranial base, and craniofacial measurements. Differences between patients with DS and control participants were statistically analyzed using Student t test. Results: Compared to control participants, patients with DS exhibited statistically significant reductions in maxillary and mandibular volumes. Both sagittal and axial cranial base linear measurements were shorter in patients with DS than in control participants. In contrast, the cranial base angle was enhanced in patients with DS, compared with control participants. Moreover, condylion (Co)–gnathion, anterior nasal spine–menton, and Co-subspinale (point A) measurements were shorter in patients with DS than in control participants; the sella–nasion–mandibular plane angle was significantly reduced in patients with DS, compared with control participants. Conclusion: Our results suggest that patients with DS have distinct skeletal volume and craniofacial morphology features, relative to individuals without DS.