Evolution of the upper critical field and superconducting vortex phase with thickness in PLD-grown Ta fllms

High quality superconducting thin films are the basis for the application of superconducting devices. Here we report the fllm growth and superconducting properties of the Ta films. The films were grown by the pulsed laser deposition technique on the α-Al2O3 substrates. It is found that, with the increase of the fllm thickness from 20 nm to 61 nm, both the superconducting transition temperature Tc and residual resistance ratio RRR display an upward trend, while the upper critical field decreases monotonously in a wide temperature region. A clear anisotropic behavior is revealed by comparing the upper critical fields with two difierent orientations (H ⊥ film and H // film). The anisotropy parameter Γ is found to be as high as 20 for the sample with the thickness of 20 nm. The systematical evolution from two- to three-dimensional features for the superconductivity with the increase of fllm thickness is observed in the temperature dependent upper critical fleld data. Moreover, the vortex liquid region tends to expand with the increase of the fllm thickness.

Extremely high upper critical field in BiCh2-based (Ch: S and Se) layered superconductor LaO0.5F0.5BiS2−xSex (x = 0.22 and 0.69)

Centrosymmetric compounds with local inversion symmetry breaking have tremendously interesting and intriguing physical properties. In this study, we focus on a BiCh2-based (Ch: S, Se) layered superconductor, as a system with local inversion asymmetry, because spin polarisation based on the Rashba–Dresselhaus-type spin–orbit coupling has been observed in centrosymmetric BiCh2-based LaOBiS2 systems, while the BiCh2 layer lacks local inversion symmetry. Herein, we report the existence of extremely high in-plane upper critical fields in the BiCh2-based system LaO0.5F0.5BiS2−xSex (x = 0.22 and 0.69). The superconducting states are not completely suppressed by the applied magnetic fields with strengths up to 55 T. Thus, we consider that the in-plane upper critical field is enhanced by the local inversion symmetry breaking and its layered structure. Our study will open a new pathway for the discovery of superconductors that exhibit a high upper critical field by focusing on the local inversion symmetry breaking.

Superconductivity above 200K Observed in Superhydrides of Calcium

Searching for superconductivity with Tc near room temperature is of great interest both for fundamental science & potential applications. Here we report the experimental discovery of superconductivity with maximum critical temperature(Tc) above 210 K in calcium superhydrides, the third type hydride experimentally showing superconductivity above 200K in addition to sulfur hydride & rare earth hydride system. The materials are synthesized at the synergetic conditions of 160~190 GPa and ~2000K using diamond anvil cell combined with in-situ laser heating technique. The superconductivity was studied through in situ high pressure resistance measurements in applied magnetic field for the sample quenched from high temperature while maintained at the synthesized pressure. The upper critical field was estimated to be ~268T while the GL coherent length is ~11 Å. The in situ x ray diffractions with synchrotron suggest that the synthesized calcium hydrides are primarily composed of CaH6 while there also exist other calcium hydrids with different hydrogen.

Superconductivity in the Layered Cage Compound Ba3Rh4Ge16

We report the synthesis and superconducting properties of a layered cage compound Ba3Rh4Ge16. Similar to Ba3Ir4Ge16, the compound is composed of 2D networks of cage units, formed by noncubic Rh–Ge building blocks, in marked contrast to the reported rattling compounds. The electrical resistivity, magnetization, specific heat capacity, and μSR measurements unveiled moderately coupled s-wave superconductivity with a critical temperature T c = 7.0 K, the upper critical field μ 0 H c2(0) ∼ 2.5 T, the electron-phonon coupling strength λ e−ph ∼ 0.80, and the Ginzburg–Landau parameter κ ∼ 7.89. The mass reduction with the substitution of Ir by Rh is believed to be responsible for the enhancement of T c and coupling between the cage and guest atoms. Our results highlight the importance of atomic weight of framework in cage compounds in controlling the λ e−ph strength and T c.

Non-centrosymmetric superconductor Th$$_4$$Be$$_{{33}}$$Pt$$_{{16}}$$ and heavy-fermion U$$_4$$Be$$_{{33}}$$Pt$$_{{16}}$$ cage compounds

Unconventional superconductivity in non-centrosymmetric superconductors has attracted a considerable amount of attention. While several lanthanide-based materials have been reported previously, the number of actinide-based systems remains small. In this work, we present the discovery of a novel cubic complex non-centrosymmetric superconductor $${\text {Th}}_4{\text {Be}}_{{33}}{\text {Pt}}_{{16}}$$ Th 4 Be 33 Pt 16 ($$I{\bar{4}}3d$$ I 4 ¯ 3 d space group). This intermetallic cage compound displays superconductivity below $$T_{\text {c}} = 0.90 \pm 0.04$$ T c = 0.90 ± 0.04 K, as evidenced by specific heat and resistivity data. $${\text {Th}}_4{\text {Be}}_{{33}}{\text {Pt}}_{{16}}$$ Th 4 Be 33 Pt 16 is a type-II superconductor, which has an upper critical field $${\text {H}}_{{\text {c}}2} = 0.27$$ H c 2 = 0.27 T and a moderate Sommerfeld coefficient $$\gamma _{\text {n}} = 16.3 \pm 0.8$$ γ n = 16.3 ± 0.8 mJ $${\text {mol}}^{-1}_{\text {Th}}$$ mol Th - 1 $${\text {K}}^{-2}$$ K - 2 . A non-zero density of states at the Fermi level is evident from metallic behavior in the normal state, as well as from electronic band structure calculations. The isostructural $${\text {U}}_4{\text {Be}}_{{33}}{\text {Pt}}_{{16}}$$ U 4 Be 33 Pt 16 compound is a paramagnet with a moderately enhanced electronic mass, as indicated by the electronic specific heat coefficient $$\gamma _{\text {n}} = 200$$ γ n = 200 mJ $${\text {mol}}^{-1}_{\text {U}}$$ mol U - 1 $${\text {K}}^{-2}$$ K - 2 and Kadowaki–Woods ratio $$A/\gamma ^2 = 1.1 \times 10^{-5}$$ A / γ 2 = 1.1 × 10 - 5 $$\upmu $$ μ $$\Omega $$ Ω cm $${\text {K}}^2$$ K 2 $${\text {mol}}_{\text {U}}^2$$ mol U 2 (mJ)$$^{-2}$$ - 2 . Both $${\text {Th}}_4{\text {Be}}_{{33}}{\text {Pt}}_{{16}}$$ Th 4 Be 33 Pt 16 and $${\text {U}}_4{\text {Be}}_{{33}}{\text {Pt}}_{{16}}$$ U 4 Be 33 Pt 16 are crystallographically complex, each hosting 212 atoms per unit cell.

The FFLO State in the Dimer Mott Organic Superconductor κ-(BEDT-TTF)2Cu[N(CN)2]Br

The superconducting phase diagram for a quasi-two-dimensional organic superconductor, κ-(BEDT-TTF)2Cu[N(CN)2]Br, was studied using pulsed magnetic field penetration depth measurements under rotating magnetic fields. At low temperatures, Hc2 was abruptly suppressed even by small tilts of the applied fields owing to the orbital pair-breaking effect. In magnetic fields parallel to the conducting plane, the temperature dependence of the upper critical field Hc2 exhibited an upturn and exceeded the Pauli limit field HP in the lower temperature region. Further analyses with the second derivative of the penetration depth showed an anomaly at 31–32 T, which roughly corresponded to HP. The origin of the anomaly should not be related to the orbital effect, but the paramagnetic effect, which is almost isotropic in organic salts, because it barely depends on the field angle. Based on these results, the observed anomaly is most likely due to the transition between the Bardeen-Cooper-Schrieffer (BCS) and the Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) states. Additionally, we discuss the phase diagram and physical parameters of the transition by comparing them with other FFLO candidates.

Induced Superconducting Transition in Ultra-Thin Iron-Selenide Films by a Mg-Coating Process

Binary Iron selenide (FeSe) thin films have been widely studied for years to unveil the high temperature superconductivity in iron-based superconductors. However, the origin of superconducting transition in this unconventional system is still under debate and worth deep investigations. In the present work, the transition from insulator to superconductor was achieved in non-superconducting FeSe ultrathin films (~8 nm) grown on calcium fluoride substrates via a simple in-situ Mg-coating by a pulsed laser deposition technique. The Mg-coated FeSe film with an optimized amount of Mg exhibited a superconducting critical temperature as 9.7 K and an upper critical field as 30.9 T. Through systematic characterizations on phase identification, carrier transport behavior and high-resolution microstructural features, the revival of superconductivity in FeSe ultrathin films is mostly attributed to the highly crystallized FeSe and extra electron doping received from external Mg-coating process. Although the top few FeSe layers are incorporated with Mg, most FeSe layers are intact and protected by a stable magnesium oxide layer. This work provides a new strategy to induce superconductivity in FeSe films with non-superconducting behavior, which might contribute to a more comprehensive understanding of iron-based superconductivity and the benefit to downstream applications such as magnetic resonance imaging, high-field magnets and electrical cables.